English:No macros are currently setup for this printer.
Translated:No macros are currently setup for this printer.
English:Tuning Adjustment (while printing)
Translated:Tuning Adjustment (while printing)
English:Speed Multiplier
Translated:Speed Multiplier
English:Set
Translated:Set
English:Extrusion Multiplier
Translated:Extrusion Multiplier
English:Controls
Translated:Controls
English:Slice Settings
Translated:Slice Settings
English:Show Help
Translated:Show Help
English:Show All Settings
Translated:Show All Settings
English:Active Settings
Translated:Active Settings
English:unsaved changes
Translated:unsaved changes
English:Revert
Translated:Revert
English:Options
Translated:Options
English:Slice Engine
Translated:Slice Engine
English:No Printer Selected
Translated:No Printer Selected
English:No printer is currently selected. Select printer to edit slice settings.
Translated:No printer is currently selected. Select printer to edit slice settings.
English:Attempts to minimize the number of perimeter crossing. This can help with oozing or strings.
Translated:Attempts to minimize the number of perimeter crossing. This can help with oozing or strings.
English:The shape of the physical print bed.
Translated:The shape of the physical print bed.
English:The size of the print bed.
Translated:The size of the print bed.
English:The temperature to set the bed to after the first layer has been printed. Set to 0 to eliminate bed temperature commands.
Translated:The temperature to set the bed to after the first layer has been printed. Set to 0 to eliminate bed temperature commands.
English:How many layers will be solid filled on the bottom surfaces of the object.
Translated:How many layers will be solid filled on the bottom surfaces of the object.
English:Acceleration to during bridging. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to during bridging. Set to 0 to disable changing the printer's acceleration.
English:The fan speed to use during bridging.
Translated:The fan speed to use during bridging.
English:This controls the ratio of material extruder during bridging. Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
Translated:This controls the ratio of material extruder during bridging. Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
English:The speed to move when bridging between walls.
Translated:The speed to move when bridging between walls.
English:The amount of brim that will be drawn around each object. This is useful to ensure that parts stay affixed to the bed.
Translated:The amount of brim that will be drawn around each object. This is useful to ensure that parts stay affixed to the bed.
English:The height of the printable area. If set to 0 the parts height will not be validated.
Translated:The height of the printable area. If set to 0 the parts height will not be validated.
English:Each individual part is printed to completion then the extruder is lowered back to the bed and the next part is printed.
Translated:Each individual part is printed to completion then the extruder is lowered back to the bed and the next part is printed.
English:Moves the extruder up off the part to allow cooling.
Translated:Moves the extruder up off the part to allow cooling.
English:Turns on and off all cooling settings (all settings below this one).
Translated:Turns on and off all cooling settings (all settings below this one).
English:Acceleration to use on all moves not defined above. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to use on all moves not defined above. Set to 0 to disable changing the printer's acceleration.
English:The number of layers for which the fan will be forced to remain off.
Translated:The number of layers for which the fan will be forced to remain off.
English:This gcode will be inserted at the end of all automatic output (the very end of the gcode commands).
Translated:This gcode will be inserted at the end of all automatic output (the very end of the gcode commands).
English:The speed to print the visible outside edges. This can be set explicitly or as a percentage of the Perimeters speed.
Translated:The speed to print the visible outside edges. This can be set explicitly or as a percentage of the Perimeters speed.
English:Normally external perimeters are printed last, this makes them go first.
Translated:Normally external perimeters are printed last, this makes them go first.
English:Allow slicer to generate extra perimeters when needed for sloping walls.
Translated:Allow slicer to generate extra perimeters when needed for sloping walls.
English:This is used to figure out how far apart individual parts must be printed to allow them to be completed before printing the next part.
Translated:This is used to figure out how far apart individual parts must be printed to allow them to be completed before printing the next part.
English:This is the offset of each extruder relative to the first extruder. Only useful for multiple extruder machines.
Translated:This is the offset of each extruder relative to the first extruder. Only useful for multiple extruder machines.
English:This is the identifier used in the gcode to specify the extruder.
Translated:This is the identifier used in the gcode to specify the extruder.
English:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good min value) will decrease the amount being extruded.
Translated:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good min value) will decrease the amount being extruded.
English:Leave this as 0 to allow automatic calculation of extrusion width.
Translated:Leave this as 0 to allow automatic calculation of extrusion width.
English:This will force the fan to remain on throughout the print. In general you should have this off and just enable auto cooling.
Translated:This will force the fan to remain on throughout the print. In general you should have this off and just enable auto cooling.
English:If a layer is estimated to take less than this to print, the fan will be turned on.
Translated:If a layer is estimated to take less than this to print, the fan will be turned on.
English:This should be set to the actual diameter of the filament you are using on your printer. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
Translated:This should be set to the actual diameter of the filament you are using on your printer. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
English:Sets the starting angle of the infill. Not used when bridging.
Translated:Sets the starting angle of the infill. Not used when bridging.
English:The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
Translated:The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
English:The pattern used on the inside portions of the print.
Translated:The pattern used on the inside portions of the print.
English:Acceleration to use while printing the first layer. Set to 0 to the default first layer acceleration.
Translated:Acceleration to use while printing the first layer. Set to 0 to the default first layer acceleration.
English:The temperature to set the bed to before printing the first layer. The printer will wait until this temperature has been reached before printing. Set to 0 to eliminate bed temperature commands.
Translated:The temperature to set the bed to before printing the first layer. The printer will wait until this temperature has been reached before printing. Set to 0 to eliminate bed temperature commands.
English:Setting this to greater than 100% can often help the first layer have better adhesion to the print bed.
Translated:Setting this to greater than 100% can often help the first layer have better adhesion to the print bed.
English:Sets the height of the first layer. It is often desirable to print a taller first layer to ensure a good solid adhesion to the build plate.
Translated:Sets the height of the first layer. It is often desirable to print a taller first layer to ensure a good solid adhesion to the build plate.
English:The speed to move while printing the first layer. If expressed as a percentage it will modify the corresponding speed set above.
Translated:The speed to move while printing the first layer. If expressed as a percentage it will modify the corresponding speed set above.
English:The temperature to set the extruder to before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
Translated:The temperature to set the extruder to before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
English:Use G0 for moves rather than G1.
Translated:Use G0 for moves rather than G1.
English:Speed to fill small gaps. Keep low to avoid vibration. Set to 0 to skip filling small gaps.
Translated:Speed to fill small gaps. Keep low to avoid vibration. Set to 0 to skip filling small gaps.
English:Use firmware arcs rather than multiple segments for curves.
Translated:Use firmware arcs rather than multiple segments for curves.
English:Include detailed comments in the gcode.
Translated:Include detailed comments in the gcode.
English:Some firmware use different g and m codes. Setting this ensures that the output gcode will use the correct commands.
Translated:Some firmware use different g and m codes. Setting this ensures that the output gcode will use the correct commands.
English:Acceleration to use while infilling. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to use while infilling. Set to 0 to disable changing the printer's acceleration.
English:Sets which layers will receive infill. This should normally stay set to 1 to make strong parts.
Translated:Sets which layers will receive infill. This should normally stay set to 1 to make strong parts.
English:The index of the extruder to use for infill.
Translated:The index of the extruder to use for infill.
English:Sets infill to happen before perimeters are created.
Translated:Sets infill to happen before perimeters are created.
English:Creates infill only where it will be used as internal support.
Translated:Creates infill only where it will be used as internal support.
English:The speed to print infill.
Translated:The speed to print infill.
English:This gcode will be inserted right after the change in z height for the next layer.
Translated:This gcode will be inserted right after the change in z height for the next layer.
English:Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.
Translated:Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.
English:This is the maximum speed that your fan can run at.
Translated:This is the maximum speed that your fan can run at.
English:This is the minimum amount of filament that must be extruded before a rectarction can occure.
Translated:This is the minimum amount of filament that must be extruded before a rectarction can occure.
English:This is the minimum fan speed that your fan can run at.
Translated:This is the minimum fan speed that your fan can run at.
English:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the min layer time.
Translated:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the min layer time.
English:Sets the minimum amount of filament to use drawing the skirt loops. This will cause at least enough skirt loops to be drawn to use this amount of filament.
Translated:Sets the minimum amount of filament to use drawing the skirt loops. This will cause at least enough skirt loops to be drawn to use this amount of filament.
English:These notes will be added as comments in the header of the output gcode.
Translated:These notes will be added as comments in the header of the output gcode.
English:This is the diameter of your extruder nozle.
Translated:This is the diameter of your extruder nozle.
English:Prevents retraction while within a printing perimeter.
Translated:Prevents retraction while within a printing perimeter.
English:This will lower the temperature of the non-printing extruder to help prevent oozing.
Translated:This will lower the temperature of the non-printing extruder to help prevent oozing.
English:Experimental feature that attempts to improve overhangs using the fan and bridge settings.
Translated:Experimental feature that attempts to improve overhangs using the fan and bridge settings.
English:Sets the way that slicer creates file names (this is not used by MatterControl).
Translated:Sets the way that slicer creates file names (this is not used by MatterControl).
English:Acceleration to use on perimeters. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to use on perimeters. Set to 0 to disable changing the printer's acceleration.
English:The index of the extruder to use for perimeters.
Translated:The index of the extruder to use for perimeters.
English:Sets the default movement speed while printing perimeters.
Translated:Sets the default movement speed while printing perimeters.
English:The number of external layers or shells to create.
Translated:The number of external layers or shells to create.
English:You can include additional programs to process the gcode after slicer is finished. The complete path of the program to run should be included here.
Translated:You can include additional programs to process the gcode after slicer is finished. The complete path of the program to run should be included here.
English:The position (coordinates) of the center of the print bed.
Translated:The position (coordinates) of the center of the print bed.
English:Number of layers to print before printing any parts.
Translated:Number of layers to print before printing any parts.
English:Start each new layer from a different vertex to reduce seams.
Translated:Start each new layer from a different vertex to reduce seams.
English:The minimum distance of a non-printing move that will result in a retraction.
Translated:The minimum distance of a non-printing move that will result in a retraction.
English:If set, a retraction will occur prior to changing the layer height.
Translated:If set, a retraction will occur prior to changing the layer height.
English:The amount that the filament will be reversed after each qualifying non-printing move.
Translated:The amount that the filament will be reversed after each qualifying non-printing move.
English:The amount that the filament will be reversed before changing to a new tool.
Translated:The amount that the filament will be reversed before changing to a new tool.
English:The amount the extruder head will be lifted after each retraction.
Translated:The amount the extruder head will be lifted after each retraction.
English:The amount the filament will be retracted when changing to a different extruder.
Translated:The amount the filament will be retracted when changing to a different extruder.
English:No updates are currently available.
Translated:No updates are currently available.
English:Additional amount of filament that will be extruded after a retraction.
Translated:Additional amount of filament that will be extruded after a retraction.
English:The amount of extra extrusion that will occur when an extruder is selected.
Translated:The amount of extra extrusion that will occur when an extruder is selected.
English:The speed that the filament will be retracted (and re-extruded).
Translated:The speed that the filament will be retracted (and re-extruded).
English:The minimum feature size to consider from the model. Leave at 0 to use all the model detail.
Translated:The minimum feature size to consider from the model. Leave at 0 to use all the model detail.
English:The distance to start drawing the first skirt loop.
Translated:The distance to start drawing the first skirt loop.
English:The number of layers to draw the skirt.
Translated:The number of layers to draw the skirt.
English:The number of loops to draw around all the parts on the bed.
Translated:The number of loops to draw around all the parts on the bed.
English:If a layer is estimated to take less than this to print, the movement speed will be reduced to try and make the layer take this long to print.
Translated:If a layer is estimated to take less than this to print, the movement speed will be reduced to try and make the layer take this long to print.
English:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
Translated:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
English:The pattern used on the bottom and top layers of the print.
Translated:The pattern used on the bottom and top layers of the print.
English:Forces solid infill for any area less than this amount.
Translated:Forces solid infill for any area less than this amount.
English:Sets how often a layer will be forced to be solid infilled. Zero will result in normal infill throughout.
Translated:Sets how often a layer will be forced to be solid infilled. Zero will result in normal infill throughout.
English:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
Translated:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
English:Force the print to have only one layer and gradually increase the extruder height during the print. Only one part can be printed at a time with this feature.
Translated:Force the print to have only one layer and gradually increase the extruder height during the print. Only one part can be printed at a time with this feature.
English:This is the amount to lower the temperature of an extruder that is not currently printing.
Translated:This is the amount to lower the temperature of an extruder that is not currently printing.
English:This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [first_layer_temperature].
Translated:This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [first_layer_temperature].
English:Make sure the first point on a perimeter is a concave point.
Translated:Make sure the first point on a perimeter is a concave point.
English:Make sure the first point on a perimeter is not an overhang.
Translated:Make sure the first point on a perimeter is not an overhang.
English:The starting angle of the supports.
Translated:The starting angle of the supports.
English:Create support where needed on internal features.
Translated:Create support where needed on internal features.
English:Generate support material everywhere not touching the bed for n layers, regardless of angle.
Translated:Generate support material everywhere not touching the bed for n layers, regardless of angle.
English:The index of the extruder to use for support material.
Translated:The index of the extruder to use for support material.
English:The index of the extruder to use for support material interface layers.
Translated:The index of the extruder to use for support material interface layers.
English:The number of layers to print between the supports and the part.
Translated:The number of layers to print between the supports and the part.
English:The space between lines of the interface layers (0 is solid).
Translated:The space between lines of the interface layers (0 is solid).
English:The pattern used while generating support material.
Translated:The pattern used while generating support material.
English:The space between the lines of he support material.
Translated:The space between the lines of he support material.
English:The speed to print support material structures.
Translated:The speed to print support material structures.
English:The last angle at which support material will be generated. Larger numbers will result in more support. Set to 0 to enable automatic settings.
Translated:The last angle at which support material will be generated. Larger numbers will result in more support. Set to 0 to enable automatic settings.
English:The distance the support material will be from the object in the x and y direction.
Translated:The distance the support material will be from the object in the x and y direction.
English:The distance the support material will be from the object in the z direction.
Translated:The distance the support material will be from the object in the z direction.
English:This turns on and off the generation of support material.
Translated:This turns on and off the generation of support material.
English:The temperature to set the extruder to after the first layer has been printed.
Translated:The temperature to set the extruder to after the first layer has been printed.
English:Detect when walls are too close together and need to be extruded as just one wall.
Translated:Detect when walls are too close together and need to be extruded as just one wall.
English:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
Translated:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
English:This gcode will be inserted after every tool change.
Translated:This gcode will be inserted after every tool change.
English:The speed to print the top infill. This can be set explicitly or as a percentage of the Infill speed.
Translated:The speed to print the top infill. This can be set explicitly or as a percentage of the Infill speed.
English:How many layers will be solid filled on the top surfaces of the object.
Translated:How many layers will be solid filled on the top surfaces of the object.
English:Speed to move when not extruding material.
Translated:Speed to move when not extruding material.
English:Request the firmware to do retractions rather than specify the extruder movements directly.
Translated:Request the firmware to do retractions rather than specify the extruder movements directly.
English:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
Translated:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
English:This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.
Translated:This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.
English:This will cause the extruder to move while retracting to minimize blobs.
Translated:This will cause the extruder to move while retracting to minimize blobs.
English:This value will be added to all of the z positions of the created gcode.
Translated:This value will be added to all of the z positions of the created gcode.
English:Print
Translated:Print
English:Layers/Perimeters
Translated:Layers/Perimeters
English:Layer Height
Translated:Layer Height
English:Perimeters (minimum)
Translated:Perimeters (minimum)
English:Vertical Shells
Translated:Vertical Shells
English:Infill
Translated:Infill
English:Fill Density
Translated:Fill Density
English:Fill Pattern
Translated:Fill Pattern
English:Support Material
Translated:Support Material
English:Generate Support Material
Translated:Generate Support Material
English:Filament
Translated:Filament
English:Diameter
Translated:Diameter
English:Extrude First Layer
Translated:Extrude First Layer
English:Extruder Other Layers
Translated:Extruder Other Layers
English:Bed First Layer
Translated:Bed First Layer
English:Bed Other Layers
Translated:Bed Other Layers
English:Temperature (<28>C)
Translated:Temperature (<28>C)
English:Cooling
Translated:Cooling
English:Enable Auto Cooling
Translated:Enable Auto Cooling
English:Enable
Translated:Enable
English:Printer
Translated:Printer
English:General
Translated:General
English:Bed Size
Translated:Bed Size
English:Print Center
Translated:Print Center
English:Build Height
Translated:Build Height
English:Size and Coordinates
Translated:Size and Coordinates
English:Extruder 1
Translated:Extruder 1
English:Nozzle Diameter
Translated:Nozzle Diameter
English:Size
Translated:Size
English:Configuration
Translated:Configuration
English:EEProm Settings
Translated:EEProm Settings
English:CONFIGURE
Translated:CONFIGURE
English:Automatic Calibration
Translated:Automatic Calibration
English:ENABLE
Translated:ENABLE
English:DISABLE
Translated:DISABLE
English:Enable Automatic Print Leveling
Translated:Enable Automatic Print Leveling
English:Automatic Print Leveling (disabled)
Translated:Automatic Print Leveling (disabled)
English:Extruder Temperature
Translated:Extruder Temperature
English:View Manual Printer Controls and Slicing Settings
Translated:View Manual Printer Controls and Slicing Settings
English:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and my not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and my not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
English:Cannot find\n'{0}'.\nWould you like to remove it from the queue?
Translated:Cannot find\n'{0}'.\nWould you like to remove it from the queue?
English:Item not found
Translated:Item not found
English:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.
Translated:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.
English:'Home' the printer
Translated:'Home' the printer
English:Sample the bed at three points
Translated:Sample the bed at three points
English:Turn auto leveling on
Translated:Turn auto leveling on
English:You should be done in about 3 minutes.
Translated:You should be done in about 3 minutes.
English:Click 'Next' to continue.
Translated:Click 'Next' to continue.
English:The printer should now be 'homing'. Once it is finished homing we will move it to the first point to sample.\n\nTo complete the next few steps you will need
Translated:The printer should now be 'homing'. Once it is finished homing we will move it to the first point to sample.\n\nTo complete the next few steps you will need
English:A standard sheet of paper
Translated:A standard sheet of paper
English:We will use this paper to measure the distance between the extruder and the bed.\n\nClick 'Next' to continue.
Translated:We will use this paper to measure the distance between the extruder and the bed.\n\nClick 'Next' to continue.
English:Congratulations!\n\nAuto Print Leveling is now configured and enabled.
Translated:Congratulations!\n\nAuto Print Leveling is now configured and enabled.
English:Remove the paper
Translated:Remove the paper
English:If in the future you wish to turn Auto Print Leveling off, you can uncheck the 'Enabled' button found in 'Advanced Settings'->'Printer Controls'.\n\nClick 'Done' to close this window.
Translated:If in the future you wish to turn Auto Print Leveling off, you can uncheck the 'Enabled' button found in 'Advanced Settings'->'Printer Controls'.\n\nClick 'Done' to close this window.
English:Step
Translated:Step
English:of
Translated:of
English:Print Leveling Wizard
Translated:Print Leveling Wizard
English:Back
Translated:Back
English:Next
Translated:Next
English:Low Precision
Translated:Low Precision
English:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
Translated:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
English:Place the paper under the extruder
Translated:Place the paper under the extruder
English:Using the above contols
Translated:Using the above contols
English:Press [Z-] until there is resistance to moving the paper
Translated:Press [Z-] until there is resistance to moving the paper
English:Press [Z+] once to release the paper
Translated:Press [Z+] once to release the paper
English:Finally click 'Next' to continue.
Translated:Finally click 'Next' to continue.
English:This part of your bed is too low for the extruder to reach it. You need to raise your bed, or lower your limit, for print leveling to work.
Translated:This part of your bed is too low for the extruder to reach it. You need to raise your bed, or lower your limit, for print leveling to work.
English:Waring Moving Too Low
Translated:Waring Moving Too Low
English:Medium Precision
Translated:Medium Precision
English:We will now refine our measurement of the extruder height at this position.
Translated:We will now refine our measurement of the extruder height at this position.
English:High Precision
Translated:High Precision
English:We will now finalize our measurement of the extruder height at this position.
Translated:We will now finalize our measurement of the extruder height at this position.
English:Press [Z-] one click PAST the first hint of resistance
Translated:Press [Z-] one click PAST the first hint of resistance
English:No printer selected. Press 'Connect' to choose a printer
Translated:No printer selected. Press 'Connect' to choose a printer
English:About
Translated:About
English:This controls the ratio of material extruder during bridging.Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
Translated:This controls the ratio of material extruder during bridging.Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
English:You cannot move any lower. This position on your bed is too low for the extruder to reach. You need to raise your bed, or adjust your limits to allow the extruder to go lower.
Translated:You cannot move any lower. This position on your bed is too low for the extruder to reach. You need to raise your bed, or adjust your limits to allow the extruder to go lower.
English:The 'Serial Port' identifies which connected device is\nyour printer. Changing which usb plug you use may\nchange the associated serial port.\n\nTip: If you are uncertain, plug-in in your printer and hit\nrefresh. The new port that appears should be your\nprinter.
Translated:The 'Serial Port' identifies which connected device is\nyour printer. Changing which usb plug you use may\nchange the associated serial port.\n\nTip: If you are uncertain, plug-in in your printer and hit\nrefresh. The new port that appears should be your\nprinter.
English:The extra distance the raft will extend around the part.
Translated:The extra distance the raft will extend around the part.
English:The percent of the 'Nozzle Diameter' that is the gap between the raft and the first layer. A smaller percent will make the part stick more. A larger percent will make it stick less.
Translated:The percent of the 'Nozzle Diameter' that is the gap between the raft and the first layer. A smaller percent will make the part stick more. A larger percent will make it stick less.
English:Try to connect mesh edges when the actual mesh data is not all the way connected.
Translated:Try to connect mesh edges when the actual mesh data is not all the way connected.
English:Sometime a mesh will not have closed a perimeters. When this is checked these non-closed perimeters while be closed.
Translated:Sometime a mesh will not have closed a perimeters. When this is checked these non-closed perimeters while be closed.
English:Reverse the orientation of overlaps. This can make some unintended holes go away.
Translated:Reverse the orientation of overlaps. This can make some unintended holes go away.
English:Make all overlap areas into one big area. This can make some unintended holes go away..
Translated:Make all overlap areas into one big area. This can make some unintended holes go away..
English:Repair
Translated:Repair
English:Connect Bad Edges
Translated:Connect Bad Edges
English:Close Polygons
Translated:Close Polygons
English:Reverse Orientation
Translated:Reverse Orientation
English:Merge All
Translated:Merge All
English:Overlaps
Translated:Overlaps
English:The distance between the first layer and the top of the raft. A good value is typically about 1/2 your extrusion diameter. So, between 0.0 and .2 for a .4 nozzle.
Translated:The distance between the first layer and the top of the raft. A good value is typically about 1/2 your extrusion diameter. So, between 0.0 and .2 for a .4 nozzle.
English:If in the future you need to re-calibrate your printer, or you wish to turn Auto Print Leveling off, you can find the print leveling controls in 'Advanced Settings'->'Configuration'.\n\nClick 'Done' to close this window.
Translated:If in the future you need to re-calibrate your printer, or you wish to turn Auto Print Leveling off, you can find the print leveling controls in 'Advanced Settings'->'Configuration'.\n\nClick 'Done' to close this window.
English:Print Leveling Overview
Translated:Print Leveling Overview
English:Note: Be sure the tip of the extrude is clean.
Translated:Note: Be sure the tip of the extrude is clean.
English:Oops! You cannot exit while a print is active.
Translated:Oops! You cannot exit while a print is active.
English:Unable to Exit
Translated:Unable to Exit
English:You are currently saving a parts sheet, are you sure you want to exit?
Translated:You are currently saving a parts sheet, are you sure you want to exit?
English:Confirm Exit
Translated:Confirm Exit
English:Disconnect and cancel the current print?
Translated:Disconnect and cancel the current print?
English:WARNING: Disconnecting will cancel the current print.\n\nDo you want to disconnect?
Translated:WARNING: Disconnecting will cancel the current print.\n\nDo you want to disconnect?
English:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
Translated:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
English:Waiting For Extruder To Heat
Translated:Waiting For Extruder To Heat
English:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Translated:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
English:Waiting For Bed To Heat
Translated:Waiting For Bed To Heat
English:Cancel the current print?
Translated:Cancel the current print?
English:Cancel Print?
Translated:Cancel Print?
English:There is a recommended update avalible for MatterControl. Would you like to download it now?
Translated:There is a recommended update avalible for MatterControl. Would you like to download it now?
English:Recommended Update Available
Translated:Recommended Update Available
English:Download Now
Translated:Download Now
English:Remind Me Later
Translated:Remind Me Later
English:Oops! There is no eeprom mapping for your printer's firmware.
Translated:Oops! There is no eeprom mapping for your printer's firmware.
English:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
Translated:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
English:This is the minimum amount of filament that must be extruded before a retraction can occur.
Translated:This is the minimum amount of filament that must be extruded before a retraction can occur.
English:Support Options
Translated:Support Options
English:If this is checked support will be allowed starting on top of internal surfaces. If it is not checked support will only be created starting at the bed.
Translated:If this is checked support will be allowed starting on top of internal surfaces. If it is not checked support will only be created starting at the bed.
English:Support Everywhere
Translated:Support Everywhere
English:The angle the support infill will be drawn.
Translated:The angle the support infill will be drawn.
English:Lets the bed leveling code know if the printer can support the z axis going below 0. A printer with min z endstops or software end stops may not be able to.
Translated:Lets the bed leveling code know if the printer can support the z axis going below 0. A printer with min z endstops or software end stops may not be able to.
Translated:The number of extruders this machine has.
English:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good minimum value) will decrease the amount being extruded.
Translated:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good minimum value) will decrease the amount being extruded.
English:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the minimum layer time.
Translated:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the minimum layer time.
English:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and may not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and may not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
English:The file you are attempting to print is a GCode file.\n\nIt is recommendended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommendended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
English:Cannot find this file\nWould you like to remove it from the queue?
Translated:Cannot find this file\nWould you like to remove it from the queue?
English:Normally while printing the printer will home before heating the extruder(s). Set this to cause the heating to happen before the homing. This can help with printers that touch the bed while homing.
Translated:Normally while printing the printer will home before heating the extruder(s). Set this to cause the heating to happen before the homing. This can help with printers that touch the bed while homing.
English:This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [temperature].
Translated:This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [temperature].
English:How many layers, or the distance, that will be solid filled on the bottom surfaces of the object. Add mm to the end of the number to specify distance.
Translated:How many layers, or the distance, that will be solid filled on the bottom surfaces of the object. Add mm to the end of the number to specify distance.
English:The number of layers, or the distance, to print between the supports and the part. Add mm to the end of the number to specify distance.
Translated:The number of layers, or the distance, to print between the supports and the part. Add mm to the end of the number to specify distance.
English:The number of layers, or the distance, to skip between the support and the model. Add mm to the end of the number to specify distance.
Translated:The number of layers, or the distance, to skip between the support and the model. Add mm to the end of the number to specify distance.
English:How many layers, or the distance, that will be solid filled on the top surfaces of the object. Add mm to the end of the number to specify distance.
Translated:How many layers, or the distance, that will be solid filled on the top surfaces of the object. Add mm to the end of the number to specify distance.
English:There is a recommended update available for MatterControl. Would you like to download it now?
Translated:There is a recommended update available for MatterControl. Would you like to download it now?
English:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
English:This printer requires print leveling to run correctly.
Translated:This printer requires print leveling to run correctly.
English:Require Leveling To Print
Translated:Require Leveling To Print
English:Oops! You cannot restart while a print is active.
Translated:Oops! You cannot restart while a print is active.
English:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
Translated:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
English:The speed to move while printing the first layer. If expressed as a percentage the above Infill speed is modified.
Translated:The speed to move while printing the first layer. If expressed as a percentage the above Infill speed is modified.
English:The distance between the interface of support and the part. A good value is typically about 1/2 your extrusion diameter. So, between 0.0 and .2 for a .4 nozzle.
Translated:The distance between the interface of support and the part. A good value is typically about 1/2 your extrusion diameter. So, between 0.0 and .2 for a .4 nozzle.
English:Attempts to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
Translated:Attempts to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
English:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
Translated:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
English:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
Translated:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
English:The amount to remove from the bottom of the model, in millimeters.
Translated:The amount to remove from the bottom of the model, in millimeters.
English:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Translated:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
English:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
Translated:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
English:The speed at which bridging between walls will print.
Translated:The speed at which bridging between walls will print.
English:The amount of brim that will be drawn around each object, in millimeters. This can be useful to ensure that parts stay affixed to the bed.
Translated:The amount of brim that will be drawn around each object, in millimeters. This can be useful to ensure that parts stay affixed to the bed.
English:The height of the printer's printable volume, in millimeters. Primarily controls the height of the visual print area displayed in 3D View.
Translated:The height of the printer's printable volume, in millimeters. Primarily controls the height of the visual print area displayed in 3D View.
English:G-Code to run when a print is canceled.
Translated:G-Code to run when a print is canceled.
English:Centers the print on the bed, regardless of where it is moved in Edit Mode. Disable to allow printing a model anywhere on the bed.
Translated:Centers the print on the bed, regardless of where it is moved in Edit Mode. Disable to allow printing a model anywhere on the bed.
English:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
Translated:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
English:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
Translated:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
English:The extra distance the raft will extend around the edge of the part.
Translated:The extra distance the raft will extend around the edge of the part.
English:The distance between the first layer and the top of the raft. A good value is typically about half the extrusion diameter. For a 0.4 mm nozzle, a value between 0.0 and 0.2 would be best.
Translated:The distance between the first layer and the top of the raft. A good value is typically about half the extrusion diameter. For a 0.4 mm nozzle, a value between 0.0 and 0.2 would be best.
English:The speed at which the cooling fan(s) will run during the printing of the raft, expressed as a percentage of full power.
Translated:The speed at which the cooling fan(s) will run during the printing of the raft, expressed as a percentage of full power.
English:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
Translated:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
English:The number of layers for which the layer cooling fan will be forced off at the start of the print.
Translated:The number of layers for which the layer cooling fan will be forced off at the start of the print.
English:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
Translated:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
English:The speed at which outside, (visible) perimeters will print.
Translated:The speed at which outside, (visible) perimeters will print.
English:Forces external perimeters to be printed first. By default, they will print last.
Translated:Forces external perimeters to be printed first. By default, they will print last.
English:The number of extruders the printer has.
Translated:The number of extruders the printer has.
English:Indicate that the extruders share a common heater cartridge.
Translated:Indicate that the extruders share a common heater cartridge.
English:Forces the printer to heat the nozzle before homing.
Translated:Forces the printer to heat the nozzle before homing.
English:This is the identifier used in the G-Code to specify the extruder.
Translated:This is the identifier used in the G-Code to specify the extruder.
English:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
Translated:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
English:The actual diameter of the filament used for printing.
Translated:The actual diameter of the filament used for printing.
English:The angle of the infill, measured from the X axis. Not used when bridging.
Translated:The angle of the infill, measured from the X axis. Not used when bridging.
English:The amount of infill material to generate, expressed as a ratio or a percentage.
Translated:The amount of infill material to generate, expressed as a ratio or a percentage.
English:The geometric shape of the support structure for the inside of parts.
Translated:The geometric shape of the support structure for the inside of parts.
English:Acceleration to use while printing the first layer. Set to 0 to use the default first layer acceleration.
Translated:Acceleration to use while printing the first layer. Set to 0 to use the default first layer acceleration.
English:The height of the first layer. A first layer taller than the default layer height can sometimes be used to improve adhesion to the build plate.
Translated:The height of the first layer. A first layer taller than the default layer height can sometimes be used to improve adhesion to the build plate.
English:The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.
Translated:The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.
English:Include detailed comments in the G-Code.
Translated:Include detailed comments in the G-Code.
English:The version of G-Code the printer's firmware communicates with. Some firmware use different G and M codes. Setting this ensures that the output G-Code will use the correct commands.
Translated:The version of G-Code the printer's firmware communicates with. Some firmware use different G and M codes. Setting this ensures that the output G-Code will use the correct commands.
English:The printer has a layer-cooling fan.
Translated:The printer has a layer-cooling fan.
English:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
Translated:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
English:The printer has a heated bed.
Translated:The printer has a heated bed.
English:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Control pane.
Translated:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Control pane.
English:The printer has a SD card reader.
Translated:The printer has a SD card reader.
English:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
Translated:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
English:Acceleration to use when printing infill. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to use when printing infill. Set to 0 to disable changing the printer's acceleration.
English:The speed at which infill will print.
Translated:The speed at which infill will print.
English:The print leveling algorithm to use.
Translated:The print leveling algorithm to use.
English:The printer requires print leveling to run correctly.
Translated:The printer requires print leveling to run correctly.
English:The print leveling sampling method to use.
Translated:The print leveling sampling method to use.
English:The thickness of the paper (or other calibration device) used to perform manual bed probe.
Translated:The thickness of the paper (or other calibration device) used to perform manual bed probe.
English:G-Code to be run after the change in Z height for the next layer.
Translated:G-Code to be run after the change in Z height for the next layer.
English:The height of each layer of the print, except the first. A smaller number will create more layers and more vertical accuracy but also a slower print.
Translated:The height of each layer of the print, except the first. A smaller number will create more layers and more vertical accuracy but also a slower print.
English:Sets the size of the outer solid surface (perimeter) for the entire print.
Translated:Sets the size of the outer solid surface (perimeter) for the entire print.
English:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
Translated:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
English:The minimum length of filament that must be extruded before a retraction can occur.
Translated:The minimum length of filament that must be extruded before a retraction can occur.
English:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
Translated:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
English:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
Translated:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
English:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value.
Translated:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value.
English:These notes will be added as comments in the header of the output G-Code.
Translated:These notes will be added as comments in the header of the output G-Code.
English:The diameter of the extruder's nozzle.
Translated:The diameter of the extruder's nozzle.
English:G-Code to run when the printer is paused.
Translated:G-Code to run when the printer is paused.
English:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
Translated:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
English:The speed at which inside perimeters will print.
Translated:The speed at which inside perimeters will print.
English:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
Translated:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
English:You can include additional programs to process the G-Code after slicer is finished. The complete path of the program to run should be included here.
Translated:You can include additional programs to process the G-Code after slicer is finished. The complete path of the program to run should be included here.
English:The position (X and Y coordinates) of the center of the print bed, in millimeters.
Translated:The position (X and Y coordinates) of the center of the print bed, in millimeters.
English:G-Code to be run when the print resumes after a pause.
Translated:G-Code to be run when the print resumes after a pause.
English:The minimum distance of a non-print move which will trigger a retraction.
Translated:The minimum distance of a non-print move which will trigger a retraction.
English:The distance filament will reverse before each qualifying non-print move
Translated:The distance filament will reverse before each qualifying non-print move
English:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
Translated:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
English:Force a retraction when moving between islands (distinct parts on the layer).
Translated:Force a retraction when moving between islands (distinct parts on the layer).
English:The distance the nozzle will lift after each retraction.
Translated:The distance the nozzle will lift after each retraction.
English:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
Translated:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
English:The speed at which filament will retract and re-extrude.
Translated:The speed at which filament will retract and re-extrude.
English:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
Translated:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
English:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
Translated:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
English:Forces the print to have only one extrusion and gradually increase the extruder height during the print. Only one part will print at a time with this feature.
Translated:Forces the print to have only one extrusion and gradually increase the extruder height during the print. Only one part will print at a time with this feature.
English:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
Translated:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
English:The distance between the first layer (the bottom) and the top of the raft. A good value depends on the type of material. For PLA and ABS a value between 0.1 and 0.3 generaly works well.
Translated:The distance between the first layer (the bottom) and the top of the raft. A good value depends on the type of material. For PLA and ABS a value between 0.1 and 0.3 generaly works well.
English:The percent of the extrusion width that can be overlapped and still generate.
Translated:The percent of the extrusion width that can be overlapped and still generate.
English:The angle at which the support material lines will be drawn.
Translated:The angle at which the support material lines will be drawn.
English:Generates support material starting on top of internal surfaces. If unchecked support will only generate starting on the bed.
Translated:Generates support material starting on top of internal surfaces. If unchecked support will only generate starting on the bed.
English:The index of the extruder to use for printing support material. Applicable only when Extruder Count is set to a value more than 1.
Translated:The index of the extruder to use for printing support material. Applicable only when Extruder Count is set to a value more than 1.
English:The index of the extruder to use to print the raft. Set to 0 to use the support extruder index.
Translated:The index of the extruder to use to print the raft. Set to 0 to use the support extruder index.
English:A modifier of the width of the extrusion when printing support material. Set to 0 for automatic calculation.
Translated:A modifier of the width of the extrusion when printing support material. Set to 0 for automatic calculation.
English:The index of the extruder to use for support material interface layer(s).
Translated:The index of the extruder to use for support material interface layer(s).
English:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
Translated:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
English:The pattern to draw for the generation of support material.
Translated:The pattern to draw for the generation of support material.
English:The distance between support material lines.
Translated:The distance between support material lines.
English:The speed at which support material structures will print.
Translated:The speed at which support material structures will print.
English:The minimum angle of overhang for which support material will be created. The angle perpendicular to the bed = 0; parallel with the bed = 90.
Translated:The minimum angle of overhang for which support material will be created. The angle perpendicular to the bed = 0; parallel with the bed = 90.
English:The distance the support material will be from the object in the X and Y directions.
Translated:The distance the support material will be from the object in the X and Y directions.
English:The number of layers, or the distance, to skip between the support (including interface layers) and the model. Add mm to the end of the number to specify distance.
Translated:The number of layers, or the distance, to skip between the support (including interface layers) and the model. Add mm to the end of the number to specify distance.
English:Generates support material under areas of the part which may be too steep to support themselves.
Translated:Generates support material under areas of the part which may be too steep to support themselves.
English:The target temperature the extruder will attempt to reach during the print.
Translated:The target temperature the extruder will attempt to reach during the print.
English:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
Translated:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
English:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
Translated:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
English:G-Code to be run after every tool change.
Translated:G-Code to be run after every tool change.
English:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Translated:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
English:The speed at which the nozzle will move when not extruding material.
Translated:The speed at which the nozzle will move when not extruding material.
English:The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.
Translated:The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.
English:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
Translated:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
English:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
Translated:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
English:Allows the printer to attempt going below 0 along the Z axis during the Software Print Leveling wizard, and disables related warnings. Does not override actual endstops, physical or software.
Translated:Allows the printer to attempt going below 0 along the Z axis during the Software Print Leveling wizard, and disables related warnings. Does not override actual endstops, physical or software.
English:The distance to move the nozzle along the Z axis to ensure that it is the correct distance from the print bed. A positive number will raise the nozzle, and a negative number will lower it.
Translated:The distance to move the nozzle along the Z axis to ensure that it is the correct distance from the print bed. A positive number will raise the nozzle, and a negative number will lower it.
English:No macros are currently set up for this printer.
Translated:No macros are currently set up for this printer.
English:The offset of each extruder relative to the first extruder. Only useful for multiple extruder machines.
Translated:The offset of each extruder relative to the first extruder. Only useful for multiple extruder machines.
English:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
Translated:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
English:The distance from the model at which the first skirt loop is drawn. Make this 0 to create an anchor for the part to the bed, also known as a brim.
Translated:The distance from the model at which the first skirt loop is drawn. Make this 0 to create an anchor for the part to the bed, also known as a brim.
English:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
Translated:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
English:To re-calibrate the printer, or to turn off Auto Print Leveling, the print leveling controls can be found under 'Options'->'Calibration'.\n\nClick 'Done' to close this window.
Translated:To re-calibrate the printer, or to turn off Auto Print Leveling, the print leveling controls can be found under 'Options'->'Calibration'.\n\nClick 'Done' to close this window.
English:Start G-Code cannot contain G29 if Print Leveling is enabled.
Translated:Start G-Code cannot contain G29 if Print Leveling is enabled.
English:Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling
Translated:Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling
English:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
Translated:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
English:The height of the printer's printable volume, in millimeters. Serves no purpose for slicing, but controls the height of the visual print area displayed in 3D View.
Translated:The height of the printer's printable volume, in millimeters. Serves no purpose for slicing, but controls the height of the visual print area displayed in 3D View.
English:The speed at which outside, external, or the otherwise visible perimeters will print.
Translated:The speed at which outside, external, or the otherwise visible perimeters will print.
English:Used to specify if more than one extruder share a common heater cartridge.
Translated:Used to specify if more than one extruder share a common heater cartridge.
English:The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
Translated:The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
English:The height of the first layer. A first layer taller than the default layer height can ensure good adhesion to the build plate.
Translated:The height of the first layer. A first layer taller than the default layer height can ensure good adhesion to the build plate.
English:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
Translated:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
English:The number of loops to draw around parts. Used to provide additional bed adhesion
Translated:The number of loops to draw around parts. Used to provide additional bed adhesion
English:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
Translated:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
English:The layers at which the print will pause, allowing for a change in filament. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
Translated:The layers at which the print will pause, allowing for a change in filament. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
English:Layers To Pause:
Translated:Layers To Pause:
English:Import Wizard
Translated:Import Wizard
English:Import settings as new QUALITY preset
Translated:Import settings as new QUALITY preset
English:Import settings as new MATERIAL preset
Translated:Import settings as new MATERIAL preset
English:Choose File
Translated:Choose File
English:Export Wizard
Translated:Export Wizard
English:Oops! Unable to recognize settings file '{0}'.
Translated:Oops! Unable to recognize settings file '{0}'.
English:The distance between the first layer (the bottom) and the top of the support material. A good value depends on the type of material. For PLA and ABS a value between 0.1 and 0.3 generaly works well.
Translated:The distance between the first layer (the bottom) and the top of the support material. A good value depends on the type of material. For PLA and ABS a value between 0.1 and 0.3 generaly works well.
English:It's time to upload your existing printers to your MatterHackers account. Once uploaded, these printers will be available every time you log into MatterControl.
Translated:It's time to upload your existing printers to your MatterHackers account. Once uploaded, these printers will be available every time you log into MatterControl.
English:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
Translated:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
English:The layer(s) at which the print will pause, allowing for a change in filament. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
English:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
Translated:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
English:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
Translated:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
English:It's time to migrate your existing printer settings to your MatterHackers account. Once added, these printers will be available whenever and wherever you sign in to MatterControl. Printers that are not migrated will only be available in 'guest' mode.
Translated:It's time to migrate your existing printer settings to your MatterHackers account. Once added, these printers will be available whenever and wherever you sign in to MatterControl. Printers that are not migrated will only be available in 'guest' mode.
English:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
Translated:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
English:WARNING: Disconnecting will cancel the print
Translated:WARNING: Disconnecting will cancel the print
English:It's time to copy your existing printer settings to your MatterHackers account. Once copied, these printers will be available whenever you sign in to MatterControl. Printers that are not copied will only be available in 'guest' mode.
Translated:It's time to copy your existing printer settings to your MatterHackers account. Once copied, these printers will be available whenever you sign in to MatterControl. Printers that are not copied will only be available in 'guest' mode.
English:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
Translated:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
English:This is automatically set by MatterControl. You do not need to adjust it.
Translated:This is automatically set by MatterControl. You do not need to adjust it.
English:The amount to change the printers home position after a z home has occured. This is used by print leveling and recovery. This should not be manualy edited.
Translated:The amount to change the printers home position after a z home has occured. This is used by print leveling and recovery. This should not be manualy edited.
English:Z Home Position
Translated:Z Home Position
English:Offset After Homing
Translated:Offset After Homing
English:Leveling Calibration
Translated:Leveling Calibration
English:It's time to copy your existing printer settings to your MatterHackers account. Once copied, these printers will be available whenever you sign in to MatterControl. Printers that are not copied will only be available when not signed in.
Translated:It's time to copy your existing printer settings to your MatterHackers account. Once copied, these printers will be available whenever you sign in to MatterControl. Printers that are not copied will only be available when not signed in.
English:Are you sure you want exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
Translated:Are you sure you want exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
English:This controls the ratio of material extruded during bridging. Reducing this slightly can help bridging by stretching the filament more, and using a fan can also help greatly.
Translated:This controls the ratio of material extruded during bridging. Reducing this slightly can help bridging by stretching the filament more, and using a fan can also help greatly.
English:Each individual part is printed to completion then the nozzle is lowered back to the bed and the next part is printed.
Translated:Each individual part is printed to completion then the nozzle is lowered back to the bed and the next part is printed.
English:Moves the nozzle up and off the part to allow cooling.
Translated:Moves the nozzle up and off the part to allow cooling.
English:Detects sections of the model that would be too thin to print and expands them to make them printable.
Translated:Detects sections of the model that would be too thin to print and expands them to make them printable.
English:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
Translated:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
English:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
Translated:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
English:The temperature to which the nozzle will be heated before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
Translated:The temperature to which the nozzle will be heated before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
English:This will lower the temperature of the non-printing nozzle to help prevent oozing.
Translated:This will lower the temperature of the non-printing nozzle to help prevent oozing.
English:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
Translated:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
English:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
Translated:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
English:The number of degrees Centigrade to lower the temperature of a nozzle while it is not active.
Translated:The number of degrees Centigrade to lower the temperature of a nozzle while it is not active.
English:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis conneted to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
Translated:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis conneted to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
English:Reverting firmware to previous version...
Translated:Reverting firmware to previous version...
English:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
Translated:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
English:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
Translated:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
