nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
mattercontrol/StaticData/Translations/Master.txt

4060 lines
117 KiB
Text
Raw Normal View History

Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:
Translated:
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English: • Remove the paper
Translated: • Remove the paper
English: 2. Look for the calibration section (pictured below)
Translated: 2. Look for the calibration section (pictured below)
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:- none -
Translated:- none -
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English: Once it is finished homing we will heat the bed.
Translated: Once it is finished homing we will heat the bed.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:$/kg
Translated:$/kg
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:%
Translated:%
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:{0} (Update Available)
Translated:{0} (Update Available)
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:{0} must be greater than 0.
Translated:{0} must be greater than 0.
English:{0} must be less than or equal to the {1} * 4.
Translated:{0} must be less than or equal to the {1} * 4.
English:{0} must be less than or equal to the {1}.
Translated:{0} must be less than or equal to the {1}.
English:{0} works best when set to LINES.
Translated:{0} works best when set to LINES.
English:<< Back
Translated:<< Back
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:°
Translated:°
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:°C
Translated:°C
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:2D Layer View
Translated:2D Layer View
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:3D
Translated:3D
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:3D Layer View
Translated:3D Layer View
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:A comma separated list of sample points to probe the bed at. You must specify an x and y position for each point. For example: '20,20,100,180,180,20' will sample the bad at 3 points.
Translated:A comma separated list of sample points to probe the bed at. You must specify an x and y position for each point. For example: '20,20,100,180,180,20' will sample the bad at 3 points.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
Translated:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
Translated:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:A password reset code will be sent to your email.
Translated:A password reset code will be sent to your email.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:A Quick Tour of MatterControl
Translated:A Quick Tour of MatterControl
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:A six-digit code - sent to your email account
Translated:A six-digit code - sent to your email account
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:A standard sheet of paper
Translated:A standard sheet of paper
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:A U.S. or Canadian mobile phone number
Translated:A U.S. or Canadian mobile phone number
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:A valid email address
Translated:A valid email address
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Abort Print
Translated:Abort Print
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:About
Translated:About
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Acceleration Printing
Translated:Acceleration Printing
English:Acceleration Travel
Translated:Acceleration Travel
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Accept
Translated:Accept
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Account created
Translated:Account created
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Action
Translated:Action
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Add
Translated:Add
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Add a new Macro
Translated:Add a new Macro
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Add an.stl, .obj, .amf, .gcode or.zip file to the Library
Translated:Add an.stl, .obj, .amf, .gcode or.zip file to the Library
English:Add Base
Translated:Add Base
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Add Content
Translated:Add Content
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Add Image
Translated:Add Image
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Add New Setting
Translated:Add New Setting
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Add to Bed
Translated:Add to Bed
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Add to Selection
Translated:Add to Selection
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Adhesion
Translated:Adhesion
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Adjust this to correct differences between expected printing speeds and actual printing speeds.
Translated:Adjust this to correct differences between expected printing speeds and actual printing speeds.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Advanced
Translated:Advanced
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Advanced Array
Translated:Advanced Array
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:After Move
Translated:After Move
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:After Tool Change G-Code
Translated:After Tool Change G-Code
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:After Tool Change G-Code 2
Translated:After Tool Change G-Code 2
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Air Gap
Translated:Air Gap
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Alert
Translated:Alert
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Align
Translated:Align
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
Translated:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:All G-Code lines mush be shorter than 100 characters (excluding comments).
Translated:All G-Code lines mush be shorter than 100 characters (excluding comments).
English:All Heaters
Translated:All Heaters
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Allow MatterControl to split long lines to improve leveling and print canceling. Critical for printers that are significantly out of level.
Translated:Allow MatterControl to split long lines to improve leveling and print canceling. Critical for printers that are significantly out of level.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Alpha
Translated:Alpha
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Alpha: The in development version of MatterControl
Translated:Alpha: The in development version of MatterControl
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:and ensure that no filament is stuck to your nozzle.
Translated:and ensure that no filament is stuck to your nozzle.
Update master.txt
2018-06-08 14:15:29 -07:00
English:and the hotend to heat to
Translated:and the hotend to heat to
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Anyone with this code will have access
Translated:Anyone with this code will have access
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Application Cache
Translated:Application Cache
English:Application Storage
Translated:Application Storage
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Apply
Translated:Apply
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Apply leveling to G-Code during export
Translated:Apply leveling to G-Code during export
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Are you sure you want to abort the current print and close MatterControl?
Translated:Are you sure you want to abort the current print and close MatterControl?
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Are you sure you want to add this part ({0}) to the Queue?\nThe 3D part you are trying to load may be too complicated and cause performance or stability problems.\n\nConsider reducing the geometry before proceeding.
Translated:Are you sure you want to add this part ({0}) to the Queue?\nThe 3D part you are trying to load may be too complicated and cause performance or stability problems.\n\nConsider reducing the geometry before proceeding.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Are you sure you want to delete your currently selected printer?
Translated:Are you sure you want to delete your currently selected printer?
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
Translated:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
Update master.txt
2018-06-08 14:15:29 -07:00
English:Are you sure you want to remove the currently selected items?
Translated:Are you sure you want to remove the currently selected items?
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Are you sure you want to sign out? You will not have access to your printer profiles or cloud library.
Translated:Are you sure you want to sign out? You will not have access to your printer profiles or cloud library.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Arrange All Parts
Translated:Arrange All Parts
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:As the time to print a layer decreases to this, the fan speed will be increased up to its maximum speed.
Translated:As the time to print a layer decreases to this, the fan speed will be increased up to its maximum speed.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Ascending
Translated:Ascending
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Attempting to connect
Translated:Attempting to connect
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:ATX Power Control
Translated:ATX Power Control
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Auto Calibrate
Translated:Auto Calibrate
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Auto Connect
Translated:Auto Connect
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Auto Release Motors
Translated:Auto Release Motors
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Auto Uppercase
Translated:Auto Uppercase
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Automatic Heater Shutdown in
Translated:Automatic Heater Shutdown in
Update master.txt
2018-06-08 14:15:29 -07:00
English:Avoid contact with your skin.
Translated:Avoid contact with your skin.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Avoid Crossing Perimeters
Translated:Avoid Crossing Perimeters
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Axis
Translated:Axis
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Axis movement speeds
Translated:Axis movement speeds
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Baby Step Offset
Translated:Baby Step Offset
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Localize mouse terms - Issue MatterHackers/MCCentral#3559
2018-06-11 13:11:38 -07:00
English:Back
Translated:Back
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Backup Firmware Before Update
Translated:Backup Firmware Before Update
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:BadSubtract
Translated:BadSubtract
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Base
Translated:Base
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Baud Rate
Translated:Baud Rate
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bed
Translated:Bed
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Bed Leveling
Translated:Bed Leveling
Update translations
2018-07-13 09:02:22 -07:00
English:Bed PID Settings
Translated:Bed PID Settings
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bed Remove Part Temperature
Translated:Bed Remove Part Temperature
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bed Shape
Translated:Bed Shape
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bed Size
Translated:Bed Size
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bed Temperature
Translated:Bed Temperature
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Bed Temperature:
Translated:Bed Temperature:
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Before Tool Change
Translated:Before Tool Change
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Before Tool Change G-Code
Translated:Before Tool Change G-Code
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Before Tool Change G-Code 2
Translated:Before Tool Change G-Code 2
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Behavior
Translated:Behavior
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Beta
Translated:Beta
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Beta: The release candidate version of MatterControl
Translated:Beta: The release candidate version of MatterControl
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Bottom Solid Infill
Translated:Bottom Solid Infill
Update localization
2018-08-06 15:33:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bottom Solid Layers
Translated:Bottom Solid Layers
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Braille
Translated:Braille
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Braille Card
Translated:Braille Card
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Bridge Over Infill
Translated:Bridge Over Infill
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bridges
Translated:Bridges
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Bridging Fan Speed
Translated:Bridging Fan Speed
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Brim
Translated:Brim
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:brims
Translated:brims
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Build Height
Translated:Build Height
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Calculate and transmit a standard rep-rap checksum for all commands.
Translated:Calculate and transmit a standard rep-rap checksum for all commands.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Calculate Path
Translated:Calculate Path
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Calibrate Probe Offset
Translated:Calibrate Probe Offset
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Calibration
Translated:Calibration
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Calibration Error
Translated:Calibration Error
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Calibration Files
Translated:Calibration Files
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Calibration Parts
Translated:Calibration Parts
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cancel
Translated:Cancel
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Cancel command
Translated:Cancel command
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cancel G-Code
Translated:Cancel G-Code
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cancel Print
Translated:Cancel Print
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cancel Print?
Translated:Cancel Print?
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cancel the current print?
Translated:Cancel the current print?
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Can't access '{0}'.
Translated:Can't access '{0}'.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Can't add printers while printing
Translated:Can't add printers while printing
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Can't log out while printing
Translated:Can't log out while printing
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Can't sign in while printing
Translated:Can't sign in while printing
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Change
Translated:Change
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Change Password
Translated:Change Password
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Changing your update channel will change the version of MatterControl that you receive when updating
Translated:Changing your update channel will change the version of MatterControl that you receive when updating
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Check for Update
Translated:Check for Update
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Check For Update
Translated:Check For Update
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Checking Cloud Services
Translated:Checking Cloud Services
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Checking for updates...
Translated:Checking for updates...
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Checking with webservice
Translated:Checking with webservice
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Checks before each print that the layer height is less than the nozzle diameter (important for filament adhesion)
Translated:Checks before each print that the layer height is less than the nozzle diameter (important for filament adhesion)
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Choose the command for showing the print progress on the printer's LCD screen, if it has one.
Translated:Choose the command for showing the print progress on the printer's LCD screen, if it has one.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Clean
Translated:Clean
Update localization
2018-08-06 15:33:00 -07:00
English:Clean Filament Page
Translated:Clean Filament Page
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Clear
Translated:Clear
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Clear Bed
Translated:Clear Bed
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Clear Cache
Translated:Clear Cache
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Clear selection
Translated:Clear selection
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Clear ZOffset
Translated:Clear ZOffset
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Click 'Done' to close this window.
Translated:Click 'Done' to close this window.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Click 'Next' to continue.
Translated:Click 'Next' to continue.
Made the first pass of actually doing the localizations. There is now a small bit of Spanish localization. Moved the LocalizedString into MC so that it is clearer that translation files aren't saved.
2014-03-11 15:10:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Close
Translated:Close
Fixing up the localization file to always maintain the master file when in English added localized start and end to gcode view Made the TAZ baud rate correct Some new localizations
2014-03-15 14:02:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Close Polygons
Translated:Close Polygons
Fixing up the localization file to always maintain the master file when in English added localized start and end to gcode view Made the TAZ baud rate correct Some new localizations
2014-03-15 14:02:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cloud Library
Translated:Cloud Library
Fixing up the localization file to always maintain the master file when in English added localized start and end to gcode view Made the TAZ baud rate correct Some new localizations
2014-03-15 14:02:43 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Coast At End
Translated:Coast At End
Fixing up the localization file to always maintain the master file when in English added localized start and end to gcode view Made the TAZ baud rate correct Some new localizations
2014-03-15 14:02:43 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Collapse All
Translated:Collapse All
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Color
Translated:Color
Fixing up the localization file to always maintain the master file when in English added localized start and end to gcode view Made the TAZ baud rate correct Some new localizations
2014-03-15 14:02:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Color View
Translated:Color View
Fixing up the localization file to always maintain the master file when in English added localized start and end to gcode view Made the TAZ baud rate correct Some new localizations
2014-03-15 14:02:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Combine
Translated:Combine
Fixing up the localization file to always maintain the master file when in English added localized start and end to gcode view Made the TAZ baud rate correct Some new localizations
2014-03-15 14:02:43 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Community
Translated:Community
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Compile model
Translated:Compile model
Added a string helper that lets us use an extension method to format strings easier. Added a string extension method for localize that makes it easier to get localized text Moved code into these new methods. Removed some strings from localizing (app names and copy write notice)
2014-03-16 10:23:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Complete Individual Objects
Translated:Complete Individual Objects
More translations found.
2014-03-17 08:05:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cone
Translated:Cone
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Configure
Translated:Configure
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Configure EEProm
Translated:Configure EEProm
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Configure Notifications
Translated:Configure Notifications
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Configure Printer
Translated:Configure Printer
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Confirm your new password
Translated:Confirm your new password
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Confirm your Password
Translated:Confirm your Password
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Congratulations on connecting to your printer. Before starting your first print we need to run a simple calibration procedure.
Translated:Congratulations on connecting to your printer. Before starting your first print we need to run a simple calibration procedure.
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Congratulations! Print Leveling is now configured and enabled.
Translated:Congratulations! Print Leveling is now configured and enabled.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connect
Translated:Connect
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connect Bad Edges
Translated:Connect Bad Edges
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Connect printer (make sure it is on)
Translated:Connect printer (make sure it is on)
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connect to the currently selected printer
Translated:Connect to the currently selected printer
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connect your printer to check for firmware updates.
Translated:Connect your printer to check for firmware updates.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connected
Translated:Connected
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connecting
Translated:Connecting
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connection Failed
Translated:Connection Failed
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connection Lost
Translated:Connection Lost
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Connection succeeded
Translated:Connection succeeded
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Continue
Translated:Continue
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Continue Printing
Translated:Continue Printing
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Controls
Translated:Controls
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Controls the amount of extrusion
Translated:Controls the amount of extrusion
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Controls the speed of printer moves
Translated:Controls the speed of printer moves
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cooling
Translated:Cooling
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cooling Thresholds
Translated:Cooling Thresholds
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Copy
Translated:Copy
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Copy Edges
Translated:Copy Edges
English:Copy Faces
Translated:Copy Faces
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Copy Printers
Translated:Copy Printers
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Copy Printers to Account
Translated:Copy Printers to Account
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Copy State
Translated:Copy State
English:Copy Vertices
Translated:Copy Vertices
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cost
Translated:Cost
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Could not find a selected button.
Translated:Could not find a selected button.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Couldn't load file
Translated:Couldn't load file
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Couldn't save file
Translated:Couldn't save file
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:count or mm
Translated:count or mm
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create
Translated:Create
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Create a printer to export G-Code
Translated:Create a printer to export G-Code
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create Account
Translated:Create Account
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create An Account
Translated:Create An Account
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Create Brim
Translated:Create Brim
Update translations
2018-07-13 09:02:22 -07:00
English:Create Dictionaries
Translated:Create Dictionaries
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create Folder
Translated:Create Folder
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create Part Sheet
Translated:Create Part Sheet
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create Perimeter
Translated:Create Perimeter
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create Printer
Translated:Create Printer
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Create Raft
Translated:Create Raft
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Create Skirt
Translated:Create Skirt
English:Creates a brim attached to the base of the print. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
Translated:Creates a brim attached to the base of the print. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
Translated:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
Translated:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Creates an outline around the print, but not attached to it. This is useful for priming the nozzle to ensure the plastic is flowing when the print starts.
Translated:Creates an outline around the print, but not attached to it. This is useful for priming the nozzle to ensure the plastic is flowing when the print starts.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Creating firmware backup...
Translated:Creating firmware backup...
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Creation Data
Translated:Creation Data
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cube
Translated:Cube
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Current Build
Translated:Current Build
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Currently available serial ports.
Translated:Currently available serial ports.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Curve
Translated:Curve
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Custom Profile
Translated:Custom Profile
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cut
Translated:Cut
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Cylinder
Translated:Cylinder
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Date Created
Translated:Date Created
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Date Modified
Translated:Date Modified
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Default
Translated:Default
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Delete
Translated:Delete
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Delete Printer
Translated:Delete Printer
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Delete Printer?
Translated:Delete Printer?
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Delete selection
Translated:Delete selection
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Demo Mode
Translated:Demo Mode
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Density
Translated:Density
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Descending
Translated:Descending
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Description
Translated:Description
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Design Apps
Translated:Design Apps
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Design Name
Translated:Design Name
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Details
Translated:Details
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Detect gaps between perimeters that are too thin to fill with normal infill and attempt to fill them.
Translated:Detect gaps between perimeters that are too thin to fill with normal infill and attempt to fill them.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Detect perimeters that cross over themselves and combine them.
Translated:Detect perimeters that cross over themselves and combine them.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Detect when walls are too close together and need to be extruded as just one wall.
Translated:Detect when walls are too close together and need to be extruded as just one wall.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Detecting device firmware...
Translated:Detecting device firmware...
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Detects sections of the model that would be too thin to print and expands them to make them printable.
Translated:Detects sections of the model that would be too thin to print and expands them to make them printable.
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Developed By
Translated:Developed By
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Diameter
Translated:Diameter
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disable Fan For The First
Translated:Disable Fan For The First
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Disabled: {0}
Translated:Disabled: {0}
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disconnect
Translated:Disconnect
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disconnect and stop the current print?
Translated:Disconnect and stop the current print?
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disconnect from current printer
Translated:Disconnect from current printer
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disconnect printer
Translated:Disconnect printer
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disconnected
Translated:Disconnected
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disconnecting
Translated:Disconnecting
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Disconnecting from printer...
Translated:Disconnecting from printer...
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Distance
Translated:Distance
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Distance From Object
Translated:Distance From Object
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Distance or Loops
Translated:Distance or Loops
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Done
Translated:Done
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Don't remind me again
Translated:Don't remind me again
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Down Arrow
Translated:Down Arrow
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Download Now
Translated:Download Now
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Download Update
Translated:Download Update
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Downloading firmware update...
Translated:Downloading firmware update...
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Downloading updates...
Translated:Downloading updates...
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Downloading...
Translated:Downloading...
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Downloads
Translated:Downloads
Save As added to translations
2014-03-17 12:14:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Duplicate
Translated:Duplicate
Widescreen no longer recreates widgets all the time.
2014-03-20 15:54:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Each individual part is printed to completion then the nozzle is lowered back to the bed and the next part is printed.
Translated:Each individual part is printed to completion then the nozzle is lowered back to the bed and the next part is printed.
Widescreen no longer recreates widgets all the time.
2014-03-20 15:54:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:edit
Translated:edit
Widescreen no longer recreates widgets all the time.
2014-03-20 15:54:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Edit
Translated:Edit
Fixed compact view. Made disableable widget overlay widescreen dependent.
2014-03-20 18:10:23 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Edit Component
Translated:Edit Component
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Edit Leveling Data
Translated:Edit Leveling Data
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Edit Macro
Translated:Edit Macro
Lots of theme and UI related updates.
2014-03-21 16:18:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Edit OpenSCAD script
Translated:Edit OpenSCAD script
Lots of theme and UI related updates.
2014-03-21 16:18:47 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Edit Page
Translated:Edit Page
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Edit Selected Setting
Translated:Edit Selected Setting
Lots of theme and UI related updates.
2014-03-21 16:18:47 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Editor Selector
Translated:Editor Selector
Update translations
2018-07-13 09:02:22 -07:00
English:EEProm Settings
Translated:EEProm Settings
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Elbow
Translated:Elbow
Theme related changes (KP)
2014-03-21 18:44:01 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Email
Translated:Email
Theme related changes (KP)
2014-03-21 18:44:01 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Email Address
Translated:Email Address
Theme related changes (KP)
2014-03-21 18:44:01 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enable Auto Cooling
Translated:Enable Auto Cooling
More translations from having an item not on disk.
2014-03-23 09:47:20 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enable Extruder Lift
Translated:Enable Extruder Lift
More translations from having an item not on disk.
2014-03-23 09:47:20 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Enable Fan
Translated:Enable Fan
More translations from having an item not on disk.
2014-03-23 09:47:20 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Enable Line Splitting
Translated:Enable Line Splitting
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enable Recovery
Translated:Enable Recovery
Getting more slice settings mapped for MatterSlice
2014-03-24 14:06:05 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enable Retractions
Translated:Enable Retractions
Getting more slice settings mapped for MatterSlice
2014-03-24 14:06:05 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.
Translated:Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.
Getting more slice settings mapped for MatterSlice
2014-03-24 14:06:05 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:End
Translated:End
More settings working in MatterSlice.
2014-03-24 17:08:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:End G-Code
Translated:End G-Code
More settings working in MatterSlice.
2014-03-24 17:08:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter a Design Name Here
Translated:Enter a Design Name Here
fixed spelling of positive put in more matterslice settings.
2014-03-25 12:14:03 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter a username
Translated:Enter a username
fixed spelling of positive put in more matterslice settings.
2014-03-25 12:14:03 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter New Name Here
Translated:Enter New Name Here
Cleaning up some settings names and organization. Added bed size to MatterSlice settings
2014-03-25 14:10:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter reset code
Translated:Enter reset code
Cleaning up some settings names and organization. Added bed size to MatterSlice settings
2014-03-25 14:10:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter Share Code
Translated:Enter Share Code
Put in WipeShield
2014-03-25 20:57:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter your email address
Translated:Enter your email address
Put in WipeShield
2014-03-25 20:57:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter your new password
Translated:Enter your new password
Made the z distance a layer gap rather than a measurement.
2014-03-26 13:49:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter your password
Translated:Enter your password
Made the z distance a layer gap rather than a measurement.
2014-03-26 13:49:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Enter your username or email address
Translated:Enter your username or email address
Put in raft settings for MatterSlice
2014-03-27 08:12:05 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Error compiling OpenSCAD script
Translated:Error compiling OpenSCAD script
Spell out Distance in settings description.
2014-03-28 08:11:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Error creating profile
Translated:Error creating profile
Spell out Distance in settings description.
2014-03-28 08:11:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Error Loading Contents
Translated:Error Loading Contents
Spell out Distance in settings description.
2014-03-28 08:11:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Error Loading Image
Translated:Error Loading Image
more translations.
2014-03-28 18:39:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Error Reported
Translated:Error Reported
Doing raytrace unit tests on startup. More translations.
2014-03-31 13:42:18 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Estimated Cost
Translated:Estimated Cost
Doing raytrace unit tests on startup. More translations.
2014-03-31 13:42:18 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Estimated Mass
Translated:Estimated Mass
Making a new render mode of outline.
2014-03-31 17:08:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Exit while printing
Translated:Exit while printing
Making a new render mode of outline.
2014-03-31 17:08:27 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Expand All
Translated:Expand All
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Expand Distance
Translated:Expand Distance
Making a new render mode of outline.
2014-03-31 17:08:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Expand Thin Walls
Translated:Expand Thin Walls
making it possible to switch to normal serial port. more translations.
2014-04-01 11:03:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Experimental
Translated:Experimental
making it possible to switch to normal serial port. more translations.
2014-04-01 11:03:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Export
Translated:Export
Working on adding a print level sample position edit window . Cleaned up the names of the functions to get the print level sample positions vs. the measured positions.
2014-04-02 18:14:26 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Export All Settings
Translated:Export All Settings
English:Export Bed Leveling Data
Translated:Export Bed Leveling Data
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Export EEPROM
Translated:Export EEPROM
A bit more work on the bed level position editor.
2014-04-02 18:30:46 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Export EEPROM Settings
Translated:Export EEPROM Settings
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Export failed
Translated:Export failed
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Export File
Translated:Export File
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Export selection to
Translated:Export selection to
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Exporting
Translated:Exporting
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:External Perimeters First
Translated:External Perimeters First
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extra Length After Tool Change
Translated:Extra Length After Tool Change
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extra Length On Restart
Translated:Extra Length On Restart
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extrude
Translated:Extrude
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extrude filament
Translated:Extrude filament
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extrude First Layer
Translated:Extrude First Layer
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder
Translated:Extruder
Making more strings get into localization. Making the print leveling warn if the extruder needs to go below 0.
2014-04-02 21:02:39 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder 2 Temperature
Translated:Extruder 2 Temperature
Fixed some problems with part sheet names and copies. Made a warning if print leveling tries to go too low.
2014-04-03 15:59:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder 3 Temperature
Translated:Extruder 3 Temperature
Fixed some problems with part sheet names and copies. Made a warning if print leveling tries to go too low.
2014-04-03 15:59:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder 4 Temperature
Translated:Extruder 4 Temperature
removing English translation (this folder should never be here) put in German translation More strings in master
2014-04-03 18:27:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder Change
Translated:Extruder Change
Put the entire inject gcode into a lock statement. Made sure injected gcode always go in at the head. Made sure we clear our current line before we send it to the printer.
2014-04-07 14:04:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder Count
Translated:Extruder Count
Put the entire inject gcode into a lock statement. Made sure injected gcode always go in at the head. Made sure we clear our current line before we send it to the printer.
2014-04-07 14:04:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder Temperature
Translated:Extruder Temperature
Put the entire inject gcode into a lock statement. Made sure injected gcode always go in at the head. Made sure we clear our current line before we send it to the printer.
2014-04-07 14:04:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruder Wipe Temperature
Translated:Extruder Wipe Temperature
Put the entire inject gcode into a lock statement. Made sure injected gcode always go in at the head. Made sure we clear our current line before we send it to the printer.
2014-04-07 14:04:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extruders
Translated:Extruders
Put the entire inject gcode into a lock statement. Made sure injected gcode always go in at the head. Made sure we clear our current line before we send it to the printer.
2014-04-07 14:04:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extrusion
Translated:Extrusion
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extrusion Multiplier
Translated:Extrusion Multiplier
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extrusion Ratio
Translated:Extrusion Ratio
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Extrusion Width
Translated:Extrusion Width
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Fan
Translated:Fan
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Fan Speed
Translated:Fan Speed
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Features
Translated:Features
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Feedrate Ratio
Translated:Feedrate Ratio
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Filament
Translated:Filament
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Filament Has Been Loaded
Translated:Filament Has Been Loaded
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Filament Length
Translated:Filament Length
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Filament Speed
Translated:Filament Speed
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Filament Volume
Translated:Filament Volume
Re-added skip connection option on "Setup Printer Connection" window. I might add adjustments later but it looks good and works now.
2014-04-08 12:50:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:File May Cause Problems
Translated:File May Cause Problems
Set minimum sizes for widows that did not previously have them.
2014-04-08 13:22:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Fill Density
Translated:Fill Density
Set minimum sizes for widows that did not previously have them.
2014-04-08 13:22:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Fill Pattern
Translated:Fill Pattern
Set minimum sizes for widows that did not previously have them.
2014-04-08 13:22:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Fill Thin Gaps
Translated:Fill Thin Gaps
Set minimum sizes for widows that did not previously have them.
2014-04-08 13:22:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Filter Output
Translated:Filter Output
Fixed a stupid problem with adding instructions to the queue.
2014-04-09 16:53:08 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Filters
Translated:Filters
Fixed a stupid problem with adding instructions to the queue.
2014-04-09 16:53:08 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Finally click 'Next' to continue.
Translated:Finally click 'Next' to continue.
Fixed a stupid problem with adding instructions to the queue.
2014-04-09 16:53:08 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Finish
Translated:Finish
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Finished Print
Translated:Finished Print
Fixed many all upper case words to be Title case instead.
2014-04-10 14:07:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Finished Print: {0}
Translated:Finished Print: {0}
Fixed many all upper case words to be Title case instead.
2014-04-10 14:07:25 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Finishing Startup
Translated:Finishing Startup
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Firmware download failed
Translated:Firmware download failed
Fixed many all upper case words to be Title case instead.
2014-04-10 14:07:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Firmware EEPROM Settings
Translated:Firmware EEPROM Settings
Fixed many all upper case words to be Title case instead.
2014-04-10 14:07:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Firmware restored successfully. Please reconnect.
Translated:Firmware restored successfully. Please reconnect.
more strings
2014-04-11 08:08:54 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Firmware updated successfully. Please reconnect.
Translated:Firmware updated successfully. Please reconnect.
Changed many iterator functions to not have 'interator' in their names.
2014-04-13 21:29:18 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Firmware Updates
Translated:Firmware Updates
Lots of work on Getting the QueueData instance to be separate form the UI queue and refs.
2014-04-15 18:13:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Firmware Version: {0}
Translated:Firmware Version: {0}
Fixe a problem with text creator not having good view controls.
2014-04-16 12:26:35 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:First Layer
Translated:First Layer
Merge remote-tracking branch 'Greg/master' into development Conflicts: ConfigurationPage/ConfigurationPage.cs StaticData/Translations/Master.txt
2014-04-16 18:00:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:First Layer Only
Translated:First Layer Only
New about page from html is working.
2014-04-23 14:33:44 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:First Layer Thickness
Translated:First Layer Thickness
New about page from html is working.
2014-04-23 14:33:44 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Fit to Bounds
Translated:Fit to Bounds
New about page from html is working.
2014-04-23 14:33:44 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Flag for the state of our filament loaded.
Translated:Flag for the state of our filament loaded.
Update master.txt
2018-06-08 14:15:29 -07:00
English:Flag keeping track if probe calibration wizard has been run.
Translated:Flag keeping track if probe calibration wizard has been run.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Flat
Translated:Flat
Making the OEMSettings a single JSon file.
2014-04-23 17:44:49 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Flatten
Translated:Flatten
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Folder Name
Translated:Folder Name
Making the OEMSettings a single JSon file.
2014-04-23 17:44:49 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Folders
Translated:Folders
Merge remote-tracking branch 'origin/development' into development Conflicts: MatterControl.sln
2014-04-28 08:10:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Force a retraction when moving between islands (distinct parts on the layer).
Translated:Force a retraction when moving between islands (distinct parts on the layer).
Merge remote-tracking branch 'origin/development' into development Conflicts: MatterControl.sln
2014-04-28 08:10:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Forces external perimeters to be printed first. By default, they will print last.
Translated:Forces external perimeters to be printed first. By default, they will print last.
Merge remote-tracking branch 'origin/development' into development Conflicts: MatterControl.sln
2014-04-28 08:10:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
Translated:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
Refactoring a bunch of shared code into the base class of PartPreview3DWidget
2014-04-28 15:03:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Forces the printer to heat the nozzle before homing.
Translated:Forces the printer to heat the nozzle before homing.
Refactoring a bunch of shared code into the base class of PartPreview3DWidget
2014-04-28 15:03:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
Translated:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
Refactoring a bunch of shared code into the base class of PartPreview3DWidget
2014-04-28 15:03:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Forgot Password
Translated:Forgot Password
Refactoring a bunch of shared code into the base class of PartPreview3DWidget
2014-04-28 15:03:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Forums
Translated:Forums
Refactoring a bunch of shared code into the base class of PartPreview3DWidget
2014-04-28 15:03:25 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Found a line that is {0} characters long.\n{1}...
Translated:Found a line that is {0} characters long.\n{1}...
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:g/cm³
Translated:g/cm³
The update dot is now working (mostly)
2014-04-28 18:17:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:g0
Translated:g0
More translation stuff.
2014-04-29 16:03:46 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code
Translated:G-Code
More translation stuff.
2014-04-29 16:03:46 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code Flavor
Translated:G-Code Flavor
More translation stuff.
2014-04-29 16:03:46 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code Output
Translated:G-Code Output
More translation stuff.
2014-04-29 16:03:46 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:G-Code to be run after every tool change. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Translated:G-Code to be run after every tool change. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:G-Code to be run after switching to extruder 2. Will use standard after G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Translated:G-Code to be run after switching to extruder 2. Will use standard after G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Moved slider creation into shared base class.
2014-04-30 18:05:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code to be run after the change in Z height for the next layer.
Translated:G-Code to be run after the change in Z height for the next layer.
Fixed a bug with remove.
2014-05-01 17:52:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
Translated:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
Made a new mh password text edit widget.
2014-05-05 17:28:32 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:G-Code to be run before every tool change. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Translated:G-Code to be run before every tool change. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:G-Code to be run before switching to extruder 2. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Translated:G-Code to be run before switching to extruder 2. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offseting.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
Translated:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code to be run when the print resumes after a pause.
Translated:G-Code to be run when the print resumes after a pause.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
Translated:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code to run when a print is canceled.
Translated:G-Code to run when a print is canceled.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:G-Code to run when the printer is paused.
Translated:G-Code to run when the printer is paused.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:General
Translated:General
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Generate Support Material
Translated:Generate Support Material
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Generates an outline around the support material to improve strength and hold up interface layers.
Translated:Generates an outline around the support material to improve strength and hold up interface layers.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Generates support material starting on top of internal surfaces. If unchecked support will only generate starting on the bed.
Translated:Generates support material starting on top of internal surfaces. If unchecked support will only generate starting on the bed.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Generates support material under areas of the part which may be too steep to support themselves.
Translated:Generates support material under areas of the part which may be too steep to support themselves.
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Generating Lithophane
Translated:Generating Lithophane
Firmware translations.
2014-05-05 18:46:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Give the macro a name
Translated:Give the macro a name
Put in the gcode output type for matterslice.
2014-05-12 17:40:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Group
Translated:Group
translations of new settings.
2014-05-16 11:25:47 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Guides
Translated:Guides
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Guides and Articles
Translated:Guides and Articles
Made the gap distance easier to understand (user feedback). Put in repair options for slicing.
2014-05-17 13:07:04 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Half Cylinder
Translated:Half Cylinder
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Half Sphere
Translated:Half Sphere
Made the gap distance easier to understand (user feedback). Put in repair options for slicing.
2014-05-17 13:07:04 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Half Wedge
Translated:Half Wedge
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Hardware
Translated:Hardware
Made the gap distance easier to understand (user feedback). Put in repair options for slicing.
2014-05-17 13:07:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has Fan
Translated:Has Fan
Made the gap distance easier to understand (user feedback). Put in repair options for slicing.
2014-05-17 13:07:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has Filament Runout Sensor
Translated:Has Filament Runout Sensor
Made the gap distance easier to understand (user feedback). Put in repair options for slicing.
2014-05-17 13:07:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has Hardware Leveling
Translated:Has Hardware Leveling
Made the gap distance easier to understand (user feedback). Put in repair options for slicing.
2014-05-17 13:07:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has Heated Bed
Translated:Has Heated Bed
Moved the 'Sync to print' into the display tab.
2014-05-23 15:31:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has Power Control
Translated:Has Power Control
Working on 3D gcode view Making the view navigation controls for 2d and 3d a separate class.
2014-05-25 11:11:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has SD Card Reader
Translated:Has SD Card Reader
New message appears when the user cancels an active print while the extruder is heating up to its target temperature. Cancel and Pause buttons are also disabled.
2014-06-03 15:44:35 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has Z Probe
Translated:Has Z Probe
New message appears when the user cancels an active print while the extruder is heating up to its target temperature. Cancel and Pause buttons are also disabled.
2014-06-03 15:44:35 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Has Z Servo
Translated:Has Z Servo
Fixed problems in print level wizard.
2014-06-05 14:17:20 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Have MatterControl send you email messages about your print
Translated:Have MatterControl send you email messages about your print
Fixed problems in print level wizard.
2014-06-05 14:17:20 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Have MatterControl send you text messages about your print
Translated:Have MatterControl send you text messages about your print
Fixed problems in print level wizard.
2014-06-05 14:17:20 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Heat Before Homing
Translated:Heat Before Homing
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Heat the bed
Translated:Heat the bed
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Heated Bed
Translated:Heated Bed
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Heating Bed
Translated:Heating Bed
English:Heating Extruder
Translated:Heating Extruder
English:Height
Translated:Height
English:Help
Translated:Help
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:High Precision
Translated:High Precision
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:History
Translated:History
Update localization
2018-08-06 15:33:00 -07:00
English:Holding Temperature
Translated:Holding Temperature
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Home
Translated:Home
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Home the printer
Translated:Home the printer
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Home X
Translated:Home X
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Home X, Y and Z
Translated:Home X, Y and Z
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Home Y
Translated:Home Y
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Home Z
Translated:Home Z
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Home Z Max
Translated:Home Z Max
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Homing
Translated:Homing
Hade a bug in drag and drop onto a plate with multiple parts.
2014-06-10 18:19:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Homing Offset
Translated:Homing Offset
Renamed the ROBO printer to BETA
2014-06-16 10:14:15 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Homing The Printer
Translated:Homing The Printer
Put all the icons into the icons directory Lots of work on printing from SD card Put in hardware options to describe printer settings (fan, heated bed, sd card) moved icons into subdirectory.
2014-06-19 11:25:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Hotend
Translated:Hotend
Put all the icons into the icons directory Lots of work on printing from SD card Put in hardware options to describe printer settings (fan, heated bed, sd card) moved icons into subdirectory.
2014-06-19 11:25:28 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Hotend {0}
Translated:Hotend {0}
English:Hotend {0} Temperature
Translated:Hotend {0} Temperature
English:Hotend Temperature
Translated:Hotend Temperature
Update master.txt
2018-06-08 14:15:29 -07:00
English:Hotend Temperature:
Translated:Hotend Temperature:
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:How can we improve?
Translated:How can we improve?
Put all the icons into the icons directory Lots of work on printing from SD card Put in hardware options to describe printer settings (fan, heated bed, sd card) moved icons into subdirectory.
2014-06-19 11:25:28 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:How to succeed with MatterControl
Translated:How to succeed with MatterControl
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Hz
Translated:Hz
Put all the icons into the icons directory Lots of work on printing from SD card Put in hardware options to describe printer settings (fan, heated bed, sd card) moved icons into subdirectory.
2014-06-19 11:25:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:if currently connected
Translated:if currently connected
Put in a go button with the cloud monitoring.
2014-06-24 14:26:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:If set, the printer will automatically attempt to connect when selected.
Translated:If set, the printer will automatically attempt to connect when selected.
Put in a go button with the cloud monitoring.
2014-06-24 14:26:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:If the extruder has been running for a long time, it may be reporting values that are too large, this will periodically reset it.
Translated:If the extruder has been running for a long time, it may be reporting values that are too large, this will periodically reset it.
Put in a go button with the cloud monitoring.
2014-06-24 14:26:14 -07:00
Fix typos
2018-07-13 09:10:57 -07:00
English:If the time to print a layer is less than this, the fan will turn on at its minimum speed. It will then ramp up to its maximum speed as the layer time decreases.
Translated:If the time to print a layer is less than this, the fan will turn on at its minimum speed. It will then ramp up to its maximum speed as the layer time decreases.
Update master.txt
2018-06-08 14:15:29 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:If you wish to re-calibrate leveling in the future:
Translated:If you wish to re-calibrate leveling in the future:
English:If you wish to re-calibrate your probe in the future:
Translated:If you wish to re-calibrate your probe in the future:
Update master.txt
2018-06-08 14:15:29 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Image
Translated:Image
Put in a go button with the cloud monitoring.
2014-06-24 14:26:14 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Image Converter
Translated:Image Converter
Update master.txt
2018-06-08 14:15:29 -07:00
English:Image to Path
Translated:Image to Path
Added dialog to ask for remove from sd on remove from queue.
2014-06-24 18:53:17 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Immediately turn off heaters
Translated:Immediately turn off heaters
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Import
Translated:Import
Made the end of gcode printing not throw and exception.
2014-06-25 17:57:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Import EEPROM
Translated:Import EEPROM
Getting it working with vs 2013.
2014-06-27 18:18:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Import EEPROM Settings
Translated:Import EEPROM Settings
Made 3D views editable while printing (if not the embedded view). Made the eeprom windows have the correct tab stops.
2014-07-02 13:28:51 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Import Presets
Translated:Import Presets
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Import Printer
Translated:Import Printer
Made 3D views editable while printing (if not the embedded view). Made the eeprom windows have the correct tab stops.
2014-07-02 13:28:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Import Successful
Translated:Import Successful
Made 3D views editable while printing (if not the embedded view). Made the eeprom windows have the correct tab stops.
2014-07-02 13:28:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Import Wizard
Translated:Import Wizard
Made the third panel view keep its state much better. We can change printers now without the third panel changing tabs.
2014-07-03 11:50:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Include a picture of my print
Translated:Include a picture of my print
Put in some new slice settings for matter slice. Fixed some buttons to go onuithread
2014-08-08 17:03:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
Translated:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
Put in some new slice settings for matter slice. Fixed some buttons to go onuithread
2014-08-08 17:03:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Infill
Translated:Infill
Put in some new slice settings for matter slice. Fixed some buttons to go onuithread
2014-08-08 17:03:00 -07:00
English:Infill Angle
Translated:Infill Angle
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Infill Overlap
Translated:Infill Overlap
Getting the sync to print working better.
2014-08-18 16:42:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Infill Type
Translated:Infill Type
Getting the sync to print working better.
2014-08-18 16:42:04 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Inflate Path
Translated:Inflate Path
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Initial Layer Speed
Translated:Initial Layer Speed
Getting the sync to print working better.
2014-08-18 16:42:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Initial Layers
Translated:Initial Layers
Getting the sync to print working better.
2014-08-18 16:42:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Initial Printer Setup
Translated:Initial Printer Setup
Added close and clear button to terminal window. Terminal window ui cleanup.
2014-08-26 18:09:23 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Initializing hardware...
Translated:Initializing hardware...
Added close and clear button to terminal window. Terminal window ui cleanup.
2014-08-26 18:09:23 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Initializing Library
Translated:Initializing Library
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Insert
Translated:Insert
Make sure we can handle blank lines in Slice settings files (they have been added manually) Put in wipe tower and wipe shield (more work on dual extrusion)
2014-09-10 10:01:13 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Insert Filament
Translated:Insert Filament
Update localization
2018-08-06 15:33:00 -07:00
English:Insert Filament Page
Translated:Insert Filament Page
Make sure we can handle blank lines in Slice settings files (they have been added manually) Put in wipe tower and wipe shield (more work on dual extrusion)
2014-09-10 10:01:13 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Inside Perimeters
Translated:Inside Perimeters
another translation.
2014-09-11 09:55:15 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Install Update
Translated:Install Update
Make controls more consistent looking.
2014-09-18 17:06:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Interface
Translated:Interface
English:Interface Layers
Translated:Interface Layers
Changed main application to MVC. UI rework (Configuration Page esp. in progress).
2014-09-19 19:17:12 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Interface Tour
Translated:Interface Tour
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Intersect
Translated:Intersect
More work on configuration page.
2014-09-23 16:11:06 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Intersection
Translated:Intersection
Moved Localizations into agg working to add ability to compile to 64 bit.
2014-09-26 12:33:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Invalid Client Token
Translated:Invalid Client Token
Moved Localizations into agg working to add ability to compile to 64 bit.
2014-09-26 12:33:16 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Inventory
Translated:Inventory
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Invert
Translated:Invert
Moved Localizations into agg working to add ability to compile to 64 bit.
2014-09-26 12:33:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:IP Address
Translated:IP Address
Moved Localizations into agg working to add ability to compile to 64 bit.
2014-09-26 12:33:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:IP Address of printer/printer controller
Translated:IP Address of printer/printer controller
Moved Localizations into agg working to add ability to compile to 64 bit.
2014-09-26 12:33:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:IP Finder
Translated:IP Finder
Moved Localizations into agg working to add ability to compile to 64 bit.
2014-09-26 12:33:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
Translated:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
More work on Library. Edit mode now contains export and edit functions (during single selection).
2014-10-05 18:12:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:It is currently set to {0}.
Translated:It is currently set to {0}.
Making ungroup work on meshes (this is what used to happen when entering edit). New CreateDiscreteMeshes that works on attached mesh volumes rather than an orthographic projection. Put in a "Selection" menu for 3D editing that lets one group and ungroup and assign materials.
2014-10-12 08:18:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Item not Found
Translated:Item not Found
Making ungroup work on meshes (this is what used to happen when entering edit). New CreateDiscreteMeshes that works on attached mesh volumes rather than an orthographic projection. Put in a "Selection" menu for 3D editing that lets one group and ungroup and assign materials.
2014-10-12 08:18:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:It's time to copy your existing printer settings to your MatterHackers account. Once copied, these printers will be available whenever you sign in to MatterControl. Printers that are not copied will only be available when not signed in.
Translated:It's time to copy your existing printer settings to your MatterHackers account. Once copied, these printers will be available whenever you sign in to MatterControl. Printers that are not copied will only be available when not signed in.
Making some unfinished code compile.
2014-10-12 08:22:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Jerk Velocity
Translated:Jerk Velocity
Merge remote-tracking branch 'Greg/development' into development Conflicts: PartPreviewWindow/View3DTransfromPart.cs
2014-10-13 12:27:31 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Keys
Translated:Keys
Did not mean to check in the conflict.
2014-10-13 12:28:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Language
Translated:Language
Did not mean to check in the conflict.
2014-10-13 12:28:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Lay Flat
Translated:Lay Flat
Put in an ExtrudersShareTemperature setting Getting the gcode output to put in extruder 2 temps.
2014-10-13 17:00:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Layer
Translated:Layer
Get the transform from the right array.
2014-10-15 08:01:48 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Layer Change G-Code
Translated:Layer Change G-Code
Moving PartPreview3DWindow into partial class with the processors being partial adds so it is easier to navigate the code. Can export from amf Starting work on align
2014-10-15 14:11:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Layer Thickness
Translated:Layer Thickness
Localize connection related error messages
2014-10-19 10:26:09 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Layer Top
Translated:Layer Top
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Layer(s) To Pause
Translated:Layer(s) To Pause
Localize connection related error messages
2014-10-19 10:26:09 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:layers
Translated:layers
Localize connection related error messages
2014-10-19 10:26:09 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Layers / Surface
Translated:Layers / Surface
Localize connection related error messages
2014-10-19 10:26:09 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:layers or mm
Translated:layers or mm
Made any save of a file unsure that we put it in the library. Took out dead CreateCopyInQueue code Made it possible to update the FileLocation of a PrintItem.
2014-10-23 14:40:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Leave this as 0 to allow automatic calculation of extrusion width.
Translated:Leave this as 0 to allow automatic calculation of extrusion width.
Fixed a bug in ungroup (duplicating the wrong transform) Put in some exceptions for bad conditions.
2014-10-28 12:07:51 -07:00
Localize mouse terms - Issue MatterHackers/MCCentral#3559
2018-06-11 13:11:38 -07:00
English:left click
Translated:left click
English:left drag
Translated:left drag
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Length of extra filament to extrude after a complete tool change (in addition to the re-extrusion of the tool change retraction distance).
Translated:Length of extra filament to extrude after a complete tool change (in addition to the re-extrusion of the tool change retraction distance).
Added feature to replace "Default Printer" with the Make and Model of the printer if the name of the printer was not changed when added
2014-10-29 17:46:05 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
Translated:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
Making the thumbnail bath info easier to get.
2014-11-03 10:44:14 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Length on Tool Change
Translated:Length on Tool Change
Making the thumbnail bath info easier to get.
2014-11-03 10:44:14 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Leveling
Translated:Leveling
Making the thumbnail bath info easier to get.
2014-11-03 10:44:14 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Leveling Probe
Translated:Leveling Probe
Added export as AMF.
2014-11-06 07:16:55 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Leveling Settings
Translated:Leveling Settings
More translations.
2014-11-06 10:35:37 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Leveling Solution
Translated:Leveling Solution
Fixed a problem with eeprom settings loading from the printer thread rather than the uithread.
2014-11-06 11:27:42 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Library
Translated:Library
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Library - Enter Share Code
Translated:Library - Enter Share Code
Fixed a problem with eeprom settings loading from the printer thread rather than the uithread.
2014-11-06 11:27:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Limited Connectivity
Translated:Limited Connectivity
Fixed theming on terminal scroll bar.
2014-11-07 16:48:04 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Linear Array
Translated:Linear Array
Make the bed image stay when the bed is not rotating. Make the print history not crash when rebuilding from separate thread.
2014-11-11 17:15:35 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Linear Extrude
Translated:Linear Extrude
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:List of IP's discovered on the network
Translated:List of IP's discovered on the network
Put the InfInstaller back in the project
2014-11-14 11:03:13 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Lithophane
Translated:Lithophane
Did some work to show a minimal slice settings page.
2014-11-19 21:35:48 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Load
Translated:Load
Made the return to position on un-pause also work for user request pause from click 'Pause' button.
2014-11-21 12:39:13 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Load filament
Translated:Load filament
Latest translations
2018-12-27 17:17:38 -08:00
English:Load Filament
Translated:Load Filament
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Load Filament Length
Translated:Load Filament Length
New raft localization.
2014-11-23 11:15:03 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Load Filament Wizard
Translated:Load Filament Wizard
English:Load Material
Translated:Load Material
Update localization
2018-08-06 15:33:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Loading
Translated:Loading
More translation
2014-12-01 07:46:58 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Loading Bed
Translated:Loading Bed
English:Loading Filament
Translated:Loading Filament
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Loading GCode
Translated:Loading GCode
More translation
2014-12-01 07:46:58 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Loading G-Code
Translated:Loading G-Code
More translation
2014-12-01 07:46:58 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Loading Help
Translated:Loading Help
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Loading...
Translated:Loading...
Don't hide top container on touch screen. Better words on support angle.
2014-12-04 11:23:33 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Local Library
Translated:Local Library
New localized strings.
2015-01-06 16:45:19 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Location
Translated:Location
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Low Precision
Translated:Low Precision
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Lower / Deploy
Translated:Lower / Deploy
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Machine File (G-Code)
Translated:Machine File (G-Code)
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Macro Commands
Translated:Macro Commands
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Macro Editor
Translated:Macro Editor
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Macro Name
Translated:Macro Name
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Macro Presets
Translated:Macro Presets
Put in more translations. Update translation files Put in printrbot simple metal ids Updated signing cert
2015-01-09 12:13:38 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Macros
Translated:Macros
Put in more localizations and new strings.
2015-01-09 13:05:30 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:make
Translated:make
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Make
Translated:Make
Put in more localizations and new strings.
2015-01-09 13:05:30 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:Make Component
Translated:Make Component
Update master.txt
2018-06-08 14:15:29 -07:00
English:Make Selection
Translated:Make Selection
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Make Support
Translated:Make Support
Put in more localizations and new strings.
2015-01-09 13:05:30 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Make sure the first point on a perimeter is a concave point.
Translated:Make sure the first point on a perimeter is a concave point.
Put in more localizations and new strings.
2015-01-09 13:05:30 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Make sure the first point on a perimeter is not an overhang.
Translated:Make sure the first point on a perimeter is not an overhang.
Some translations text pop out window boarder
2015-01-12 14:47:07 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:Make the first layer on top of partial infill use the speed and fan for bridging.
Translated:Make the first layer on top of partial infill use the speed and fan for bridging.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Manual Movement Speeds
Translated:Manual Movement Speeds
Send strings.
2015-01-15 10:58:57 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Manually Configure Connection
Translated:Manually Configure Connection
Sending strings.
2015-01-15 14:58:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Manually measure the extruder at the center
Translated:Manually measure the extruder at the center
Sending strings.
2015-01-15 14:58:43 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:Markdown Edit
Translated:Markdown Edit
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Marlin Firmware EEPROM Settings
Translated:Marlin Firmware EEPROM Settings
Sending strings.
2015-01-15 14:58:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Material
Translated:Material
Sending strings.
2015-01-15 14:58:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Material density. Only used for estimating mass in the Layer View.
Translated:Material density. Only used for estimating mass in the Layer View.
Sending strings.
2015-01-15 14:58:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Material Loading
Translated:Material Loading
Sending strings.
2015-01-15 14:58:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Materials
Translated:Materials
Sending strings.
2015-01-15 14:58:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:MatterControl
Translated:MatterControl
Sending strings.
2015-01-15 14:58:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:MatterControl is made possible by the team at MatterHackers and other open source software
Translated:MatterControl is made possible by the team at MatterHackers and other open source software
Put in a reset connection button after the user clicks cancel. Put in a RebootBoard function in Printer Communication
2015-02-04 14:24:36 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:MatterControl will now attempt to auto-detect printer.
Translated:MatterControl will now attempt to auto-detect printer.
Put in a reset connection button after the user clicks cancel. Put in a RebootBoard function in Printer Communication
2015-02-04 14:24:36 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:MatterControl: Select Firmware File
Translated:MatterControl: Select Firmware File
Make the percent complete come from the gocde file interface.
2015-02-06 10:40:00 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Max Acceleration
Translated:Max Acceleration
Latest work on e-stop button
2015-02-25 16:14:32 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Max Velocity
Translated:Max Velocity
Latest work on e-stop button
2015-02-25 16:14:32 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Maximum Acceleration [mm/s²]
Translated:Maximum Acceleration [mm/s²]
Added more description to the eeprom error message
2015-02-26 11:06:48 -08:00
Update translations
2018-07-13 09:02:22 -07:00
English:Maximum E jerk [mm/s]
Translated:Maximum E jerk [mm/s]
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Maximum feedrates [mm/s]
Translated:Maximum feedrates [mm/s]
Update master.txt
2018-06-08 14:15:29 -07:00
English:Maximum Speed
Translated:Maximum Speed
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Maximum X-Y jerk [mm/s]
Translated:Maximum X-Y jerk [mm/s]
Merge in touch screen code.
2015-04-06 15:39:22 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Maximum Z jerk [mm/s]
Translated:Maximum Z jerk [mm/s]
Merge in touch screen code.
2015-04-06 15:39:22 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Measure the nozzle offset
Translated:Measure the nozzle offset
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Medium Precision
Translated:Medium Precision
Shared the PrintActionRow file.
2015-04-09 12:05:05 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Merge Overlapping Lines
Translated:Merge Overlapping Lines
Shared the PrintActionRow file.
2015-04-09 12:05:05 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Mesh
Translated:Mesh
Update master.txt
2018-06-08 14:15:29 -07:00
English:Message
Translated:Message
Got the touch screen to remember tab state. Got the Options page to remember its state Fixed a early binding bug in PopOutManager
2015-04-16 13:08:26 -07:00
Localize mouse terms - Issue MatterHackers/MCCentral#3559
2018-06-11 13:11:38 -07:00
English:middle drag
Translated:middle drag
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Min feedrate [mm/s]
Translated:Min feedrate [mm/s]
Refactor
2015-04-22 18:11:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Min travel feedrate [mm/s]
Translated:Min travel feedrate [mm/s]
Refactor
2015-04-22 18:11:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Minimum Extrusion Length
Translated:Minimum Extrusion Length
Made the slice detail editor work correctly with the new settings.
2015-04-24 13:18:41 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Minimum Extrusion Requiring Retraction
Translated:Minimum Extrusion Requiring Retraction
Put in a wipe before retract feature Put in an extra extrusion on unretract
2015-04-29 12:12:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Minimum Print Speed
Translated:Minimum Print Speed
Moved AABB caching to mesh.
2015-05-01 07:44:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Minimum segment time [ms]
Translated:Minimum segment time [ms]
Moved AABB caching to mesh.
2015-05-01 07:44:57 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Minimum Speed
Translated:Minimum Speed
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Minimum Travel Requiring Retraction
Translated:Minimum Travel Requiring Retraction
Moved AABB caching to mesh.
2015-05-01 07:44:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Mirror
Translated:Mirror
latest strings to localize
2015-05-04 12:02:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Missing
Translated:Missing
latest strings to localize
2015-05-04 12:02:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:mm
Translated:mm
latest strings to localize
2015-05-04 12:02:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:mm or %
Translated:mm or %
latest strings to localize
2015-05-04 12:02:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:mm zero to disable
Translated:mm zero to disable
Made the about window always on top made an update notification in the menu bar area took the "about' tab off the main page Cleaned up the checking of touchscreen Made a new Features section for the printer settings
2015-05-20 10:55:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:mm/s
Translated:mm/s
English:mm/s or %
Translated:mm/s or %
Made the about window always on top made an update notification in the menu bar area took the "about' tab off the main page Cleaned up the checking of touchscreen Made a new Features section for the printer settings
2015-05-20 10:55:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:mm/s²
Translated:mm/s²
Make sure we pre-process our settings for all slicing engines.
2015-05-20 13:36:29 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:model
Translated:model
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Model
Translated:Model
English:Model View
Translated:Model View
Deleting dead code. Moved the queue item menu to the top
2015-05-23 18:48:00 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Model View Style
Translated:Model View Style
English:Modify
Translated:Modify
Making settings more consistent
2015-05-27 18:22:01 -07:00
English:More
Translated:More
Update master.txt
2018-06-08 14:15:29 -07:00
English:Mouse
Translated:Mouse
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move
Translated:Move
Changed send to share
2015-05-28 07:49:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move (Shift + Left Mouse)
Translated:Move (Shift + Left Mouse)
handle bad requests better (don't fail when connection not available) Don't crash when writing log to protected directory.
2015-05-28 11:03:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move Item
Translated:Move Item
Code maid
2015-05-30 12:48:16 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Move Part
Translated:Move Part
English:Move Part Constrained
Translated:Move Part Constrained
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move X negative
Translated:Move X negative
Code maid
2015-05-30 12:48:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move X positive
Translated:Move X positive
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names.
2015-06-05 11:17:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move Y negative
Translated:Move Y negative
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names.
2015-06-05 11:17:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move Y positive
Translated:Move Y positive
Fixed a bug in first layer extrusion width.
2015-06-09 11:30:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move Z negative
Translated:Move Z negative
Fixed a bug in first layer extrusion width.
2015-06-09 11:30:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Move Z positive
Translated:Move Z positive
Fixed a bug in first layer extrusion width.
2015-06-09 11:30:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Movement
Translated:Movement
New library code to support collections.
2015-06-12 17:21:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Movement Speeds
Translated:Movement Speeds
Changed Changing some delegate defs to use EventHandler<> instead. Took out some EventHandler new s that were from old code Now Provider code Create Folder in library and working some in provider. New tests in MatterSlice
2015-06-24 16:59:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Movement Speeds Presets
Translated:Movement Speeds Presets
Changed Changing some delegate defs to use EventHandler<> instead. Took out some EventHandler new s that were from old code Now Provider code Create Folder in library and working some in provider. New tests in MatterSlice
2015-06-24 16:59:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Moves
Translated:Moves
Changed Changing some delegate defs to use EventHandler<> instead. Took out some EventHandler new s that were from old code Now Provider code Create Folder in library and working some in provider. New tests in MatterSlice
2015-06-24 16:59:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Moves the nozzle up and off the part to allow cooling.
Translated:Moves the nozzle up and off the part to allow cooling.
Changed Changing some delegate defs to use EventHandler<> instead. Took out some EventHandler new s that were from old code Now Provider code Create Folder in library and working some in provider. New tests in MatterSlice
2015-06-24 16:59:10 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:My Modified Settings
Translated:My Modified Settings
English:My Modified Settings (Printer)
Translated:My Modified Settings (Printer)
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Name
Translated:Name
Changed Changing some delegate defs to use EventHandler<> instead. Took out some EventHandler new s that were from old code Now Provider code Create Folder in library and working some in provider. New tests in MatterSlice
2015-06-24 16:59:10 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Need to connect before printing
Translated:Need to connect before printing
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Networked Printing
Translated:Networked Printing
updated MakerBot rep2 default settings removed X3G as a reference for MC
2015-07-01 14:08:10 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:New Design
Translated:New Design
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:New Password
Translated:New Password
Moving the Queue, Library and History to not have Print pre-pended.
2015-07-02 09:45:53 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:New updates are ready to install
Translated:New updates are ready to install
Put in the ability to turn of 3D thumbnail rendering.
2015-07-13 15:23:31 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:New updates may be available
Translated:New updates may be available
Put in new icons for library Moved classes to their own file
2015-07-24 14:00:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:New User?
Translated:New User?
Merge remote-tracking branch 'origin/1.3.0' Conflicts: StaticData/PrinterSettings/Me3D/Me2/material/PolyPlusLT.slice Make it clear this is an out not a ref.
2015-07-28 11:51:35 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Next
Translated:Next
Now we can rename folders in file provider.
2015-07-28 12:12:42 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:No
Translated:No
Now we can rename folders in file provider.
2015-07-28 12:12:42 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:No Color
Translated:No Color
Now we can rename folders in file provider.
2015-07-28 12:12:42 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:No COM ports available
Translated:No COM ports available
Make Focus work better don't return a bool, assert that there is a parent Set focus on save as window to text field. Set focus to text field on terminal window.
2015-07-29 16:31:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:No macros are currently set up for this printer.
Translated:No macros are currently set up for this printer.
Put in a bunch of print leveling data so that it is easier to get it setup and working.
2015-08-03 12:02:42 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:No Printer Selected
Translated:No Printer Selected
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:None
Translated:None
Latest agg and ms
2015-08-03 15:51:18 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
Translated:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
Latest agg and ms
2015-08-03 15:51:18 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Not Connected
Translated:Not Connected
Latest agg and ms
2015-08-03 15:51:18 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
Translated:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
Don't take empty extensions.
2015-08-03 16:46:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:NOTE: Standard messaging rates may apply.
Translated:NOTE: Standard messaging rates may apply.
Added more menus for library handling.
2015-08-03 17:31:53 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Notifications
Translated:Notifications
Made the bed leveling test pass again. Made library take zips again and filter items it can't take. Deleted some dead code.
2015-08-07 16:35:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Nozzle Diameter
Translated:Nozzle Diameter
Made the bed leveling test pass again. Made library take zips again and filter items it can't take. Deleted some dead code.
2015-08-07 16:35:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Nozzle Offsets
Translated:Nozzle Offsets
Made more code use tool tips. Wrote more tool tips.
2015-08-10 10:15:28 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Number
Translated:Number
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Number of layers to print before printing any parts.
Translated:Number of layers to print before printing any parts.
Show the new update window.
2015-08-10 15:44:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Number of Samples
Translated:Number of Samples
Make the download progress words show up.
2015-08-10 18:15:48 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Oem
Translated:Oem
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:of
Translated:of
New tooltip manager code.
2015-08-12 17:49:07 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Off
Translated:Off
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Ok
Translated:Ok
New tooltip manager code.
2015-08-12 17:49:07 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:OK
Translated:OK
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:On Connect G-Code
Translated:On Connect G-Code
New tooltip manager code.
2015-08-12 17:49:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Baud Rate must be an integer.
Translated:Oops! Baud Rate must be an integer.
New tooltip manager code.
2015-08-12 17:49:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Could not complete update.
Translated:Oops! Could not complete update.
Put in some more tooltips.
2015-08-15 16:38:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Could not find this file
Translated:Oops! Could not find this file
Put in some more tooltips.
2015-08-15 16:38:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Field cannot be left blank
Translated:Oops! Field cannot be left blank
Put in some more tooltips.
2015-08-15 16:38:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Field cannot have special characters
Translated:Oops! Field cannot have special characters
Took out the help text widget and the message action row (replaced by tool tips)
2015-08-21 13:29:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Invalid code.
Translated:Oops! Invalid code.
Made Type (as in type some text) work in the automation runner Put in a test that shows a text widget can get focus.
2015-08-21 17:44:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Invalid username, email or password.
Translated:Oops! Invalid username, email or password.
Made Type (as in type some text) work in the automation runner Put in a test that shows a text widget can get focus.
2015-08-21 17:44:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Please select a baud rate.
Translated:Oops! Please select a baud rate.
Made Type (as in type some text) work in the automation runner Put in a test that shows a text widget can get focus.
2015-08-21 17:44:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Please select a device to continue.
Translated:Oops! Please select a device to continue.
Improvements to automation runner Function to check if if a widget is actually visible. Put in a search icon
2015-08-27 11:56:01 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Please select a serial port.
Translated:Oops! Please select a serial port.
Made the 'add to library' go through provider selector
2015-09-04 13:47:48 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Please sign in to enable this feature.
Translated:Oops! Please sign in to enable this feature.
Ask the user if they want to rebuild thumbnails when switching modes.
2015-09-10 16:28:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Printer could not be detected
Translated:Oops! Printer could not be detected
Ask the user if they want to rebuild thumbnails when switching modes.
2015-09-10 16:28:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Settings file '{0}' did not contain any settings we could import.
Translated:Oops! Settings file '{0}' did not contain any settings we could import.
Put in lots of code to break on exceptions in the debugger. Made the cloud provider able to report that it is loading
2015-09-11 10:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! There is no eeprom mapping for your printer's firmware.
Translated:Oops! There is no eeprom mapping for your printer's firmware.
put in more braille grade 2 support
2015-09-16 17:20:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! There was a problem creating your account.
Translated:Oops! There was a problem creating your account.
put in more braille grade 2 support
2015-09-16 17:20:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! There was a problem processing your request.
Translated:Oops! There was a problem processing your request.
Put in a link to more about braille
2015-09-17 15:27:38 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! There was a problem resetting your password.
Translated:Oops! There was a problem resetting your password.
Add share button to library.
2015-09-17 18:03:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Unable to connect to server
Translated:Oops! Unable to connect to server
Add share button to library.
2015-09-17 18:03:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Unable to initialize device.
Translated:Oops! Unable to initialize device.
Add share button to library.
2015-09-17 18:03:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Unable to install update.
Translated:Oops! Unable to install update.
Add share button to library.
2015-09-17 18:03:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Unable to recognize settings file '{0}'.
Translated:Oops! Unable to recognize settings file '{0}'.
Add share button to library.
2015-09-17 18:03:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! You cannot share this item.
Translated:Oops! You cannot share this item.
Add share button to library.
2015-09-17 18:03:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Oops! Your session has expired. Please sign-in again to continue.
Translated:Oops! Your session has expired. Please sign-in again to continue.
Add share button to library.
2015-09-17 18:03:02 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Open
Translated:Open
English:Open File
Translated:Open File
English:Open Folder
Translated:Open Folder
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Open Package
Translated:Open Package
Add share redemption.
2015-09-17 19:19:15 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Open Recent
Translated:Open Recent
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:OpenSCAD not installed
Translated:OpenSCAD not installed
Add share redemption.
2015-09-17 19:19:15 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Optionally, click below to get help loading this material
Translated:Optionally, click below to get help loading this material
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Options
Translated:Options
Add share redemption.
2015-09-17 19:19:15 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:or
Translated:or
Fixed a bug with the cm3 value in exporting
2015-09-21 11:25:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Other
Translated:Other
Bringing some clarity to the material selection in 3d view.
2015-09-21 16:53:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Outer Surface - Perimeters
Translated:Outer Surface - Perimeters
New icons for creators.
2015-09-23 16:03:50 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Outlines
Translated:Outlines
Add configurable outside perimeter extrusion widths
2015-10-13 19:36:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Output only the first layer of the print. Especially useful for outputting gcode data for applications like engraving or cutting.
Translated:Output only the first layer of the print. Especially useful for outputting gcode data for applications like engraving or cutting.
Fixed the number of samples message.
2015-10-16 12:22:28 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Outside Perimeter
Translated:Outside Perimeter
Wrote new performance timer code Put in a warning when infilling 100% and not on LINES
2015-10-20 15:39:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Outside Perimeters
Translated:Outside Perimeters
New translation strings.
2015-11-02 18:19:22 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Overhang
Translated:Overhang
New translation strings.
2015-11-02 18:19:22 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Pan
Translated:Pan
English:Pan View
Translated:Pan View
Put in code to reset the track ball view.
2015-11-09 12:36:47 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Parse Error while slicing
Translated:Parse Error while slicing
Made the part thumbnails not mess up the alpha in flat mode.
2015-12-31 12:31:42 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Part Cooling Fan
Translated:Part Cooling Fan
English:Part History
Translated:Part History
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Password
Translated:Password
adding new test for spiral vase fixed a bug with spiral vase having too many perimeters.
2016-01-01 10:22:08 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Password Reset Code
Translated:Password Reset Code
adding new test for spiral vase fixed a bug with spiral vase having too many perimeters.
2016-01-01 10:22:08 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Password update complete
Translated:Password update complete
latest ms.
2016-01-05 15:37:37 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Paste
Translated:Paste
Adding the translation info.
2016-01-05 16:49:36 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Pattern Spacing
Translated:Pattern Spacing
Adding the translation info.
2016-01-05 16:49:36 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:Pause
Translated:Pause
English:Pause automatic heater shutdown
Translated:Pause automatic heater shutdown
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Pause G-Code
Translated:Pause G-Code
Adding the translation info.
2016-01-05 16:49:36 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:Pause Print
Translated:Pause Print
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Paused
Translated:Paused
localize string
2016-01-07 12:30:52 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:perimeters
Translated:perimeters
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Perimeters
Translated:Perimeters
Put in some localization.
2016-01-08 17:55:42 -08:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Permission Denied
Translated:Permission Denied
Update translations
2018-07-13 09:02:22 -07:00
English:PID Settings
Translated:PID Settings
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Pinch
Translated:Pinch
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Pipe Works
Translated:Pipe Works
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Place the paper under the extruder
Translated:Place the paper under the extruder
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Plating History
Translated:Plating History
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Play a Sound
Translated:Play a Sound
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Play a sound for notifications
Translated:Play a sound for notifications
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please Confirm
Translated:Please Confirm
Put in some localization.
2016-01-08 17:55:42 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Please select the material you want to load.
Translated:Please select the material you want to load.
Update master.txt
2018-06-08 14:15:29 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Please select the material you want to unload.
Translated:Please select the material you want to unload.
English:Please select the material you will be printing with.
Translated:Please select the material you will be printing with.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please sign in to continue.
Translated:Please sign in to continue.
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait until the print has finished and try again.
Translated:Please wait until the print has finished and try again.
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait while we create your account...
Translated:Please wait while we create your account...
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait while we update your password...
Translated:Please wait while we update your password...
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait. Emailing reset code...
Translated:Please wait. Emailing reset code...
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait. Redeeming code...
Translated:Please wait. Redeeming code...
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait. Retrieving share code...
Translated:Please wait. Retrieving share code...
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait. Sending invite...
Translated:Please wait. Sending invite...
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Please wait. Signing in...
Translated:Please wait. Signing in...
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Polygons
Translated:Polygons
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Port
Translated:Port
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Port not found
Translated:Port not found
Put in some localization.
2016-01-08 17:55:42 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Port number to be used with IP Address to connect to printer over the network
Translated:Port number to be used with IP Address to connect to printer over the network
Put in some localization.
2016-01-08 17:55:42 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Port Wizard
Translated:Port Wizard
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Position
Translated:Position
Updated the temperature layout strings.
2016-01-09 10:40:00 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Power Control
Translated:Power Control
Put in the ability to adjust the amount of support to generate.
2016-01-11 10:30:15 -08:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Preheat
Translated:Preheat
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Preparing To Print
Translated:Preparing To Print
Put in the ability to adjust the amount of support to generate.
2016-01-11 10:30:15 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Press
Translated:Press
Add support for closing MatterControl while printing - Rename CloseAndRemoveAllChildren
2016-01-12 11:20:27 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Press [Z-] until there is resistance to moving the paper
Translated:Press [Z-] until there is resistance to moving the paper
Add support for closing MatterControl while printing - Rename CloseAndRemoveAllChildren
2016-01-12 11:20:27 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Press [Z+] once to release the paper
Translated:Press [Z+] once to release the paper
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:Preview
Translated:Preview
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Primitive Shapes
Translated:Primitive Shapes
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Primitives
Translated:Primitives
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print
Translated:Print
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Center
Translated:Print Center
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print History
Translated:Print History
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Leveling
Translated:Print Leveling
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Leveling Overview
Translated:Print Leveling Overview
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Leveling Wizard
Translated:Print Leveling Wizard
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Notification Settings
Translated:Print Notification Settings
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Queue
Translated:Print Queue
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Recovery
Translated:Print Recovery
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Print Time
Translated:Print Time
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printer
Translated:Printer
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printer Hardware Error
Translated:Printer Hardware Error
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printer is SLA
Translated:Printer is SLA
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printer Name
Translated:Printer Name
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printer name cannot be blank
Translated:Printer name cannot be blank
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printer Paused
Translated:Printer Paused
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Printer Setup
Translated:Printer Setup
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printers
Translated:Printers
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printers to Copy
Translated:Printers to Copy
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printing
Translated:Printing
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printing From SD Card
Translated:Printing From SD Card
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printing Speed
Translated:Printing Speed
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Printing: {0}
Translated:Printing: {0}
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Probe Calibration Overview
Translated:Probe Calibration Overview
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Probe Calibration Wizard
Translated:Probe Calibration Wizard
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Probe Has Been Calibrated
Translated:Probe Has Been Calibrated
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Probe Offset Sample Point
Translated:Probe Offset Sample Point
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Probe the bed at the center
Translated:Probe the bed at the center
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Probe XY Offset
Translated:Probe XY Offset
English:Probe Z Offset
Translated:Probe Z Offset
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Progress Reporting
Translated:Progress Reporting
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Properties
Translated:Properties
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Provide this code to grant someone read-only access.
Translated:Provide this code to grant someone read-only access.
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Purchased
Translated:Purchased
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Pyramid
Translated:Pyramid
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Quality
Translated:Quality
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Radial Array
Translated:Radial Array
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Raft
Translated:Raft
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Raft Extruder
Translated:Raft Extruder
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Raft Layers
Translated:Raft Layers
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Raise / Stow
Translated:Raise / Stow
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Randomize Starting Points
Translated:Randomize Starting Points
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Read Filter
Translated:Read Filter
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reboots the firmware on the controller
Translated:Reboots the firmware on the controller
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Rebuild
Translated:Rebuild
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Rebuild Thumbnails Now
Translated:Rebuild Thumbnails Now
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Recommended Update Available
Translated:Recommended Update Available
Made the Movement offset not show unless it is not 0.
2016-01-13 17:04:14 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Recover Last Print
Translated:Recover Last Print
Add missing localizations
2016-01-14 14:20:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Recover Layer Speed
Translated:Recover Layer Speed
Add missing localizations
2016-01-14 14:20:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Recover Print
Translated:Recover Print
Add missing localizations
2016-01-14 14:20:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:recovered once
Translated:recovered once
Add missing localizations
2016-01-14 14:20:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Recovered printer profile
Translated:Recovered printer profile
Add missing localizations
2016-01-14 14:20:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Redeem Code
Translated:Redeem Code
Add missing localizations
2016-01-14 14:20:11 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Redo
Translated:Redo
Add missing localizations
2016-01-14 14:20:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Re-enter New Password
Translated:Re-enter New Password
Add missing localizations
2016-01-14 14:20:11 -08:00
English:Re-enter Password
Translated:Re-enter Password
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Refresh
Translated:Refresh
Made the leveling wizard show up after connect if required Put in a "finish setup" button Refactored some of the print leveling test code Auto close printer setup wizard on connect
2016-02-22 10:14:07 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Registered
Translated:Registered
Made the leveling wizard show up after connect if required Put in a "finish setup" button Refactored some of the print leveling test code Auto close printer setup wizard on connect
2016-02-22 10:14:07 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Release
Translated:Release
Make sure we reset the "Finish Setup..." button after completing print leveling wizard.
2016-02-22 10:24:41 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Release Notes
Translated:Release Notes
Make sure we reset the "Finish Setup..." button after completing print leveling wizard.
2016-02-22 10:24:41 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reloading
Translated:Reloading
Added GetBottomCorners function
2016-02-25 08:13:06 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Remind Me Later
Translated:Remind Me Later
Put in undo redo buttons Put in more undo
2016-02-29 10:59:30 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:remove
Translated:remove
Making side bar plugins possible
2016-03-04 10:11:05 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Remove
Translated:Remove
Making Extrude vertex source to mesh share more code internally putting in boolean failure case.
2016-03-08 12:13:58 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Remove Items?
Translated:Remove Items?
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Remove the paper
Translated:Remove the paper
Added in some more printer error messages
2016-03-09 12:36:24 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Rename
Translated:Rename
Added in some more printer error messages
2016-03-09 12:36:24 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Rename Item
Translated:Rename Item
Put in setting for output only first layer Took out non-reprap gcode output settings. makerbot is supported in binary driver ultimaker supports rep-rap gcode and ulti has errors
2016-03-10 18:18:03 -08:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Replacing
Translated:Replacing
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Report a Bug
Translated:Report a Bug
Put in setting for output only first layer Took out non-reprap gcode output settings. makerbot is supported in binary driver ultimaker supports rep-rap gcode and ulti has errors
2016-03-10 18:18:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Request the firmware to do retractions rather than specify the extruder movements directly.
Translated:Request the firmware to do retractions rather than specify the extruder movements directly.
Put in setting for output only first layer Took out non-reprap gcode output settings. makerbot is supported in binary driver ultimaker supports rep-rap gcode and ulti has errors
2016-03-10 18:18:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Require Leveling To Print
Translated:Require Leveling To Print
Fixed the engraving settings to work better
2016-03-13 22:26:41 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reset
Translated:Reset
Merge remote-tracking branch 'origin/1.5.1' Conflicts: StaticData/PrinterSettings/IRA3D/Poetry Infinity/config.ini
2016-03-18 10:39:06 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reset Long Extrusion
Translated:Reset Long Extrusion
Merge remote-tracking branch 'origin/1.5.1' Conflicts: StaticData/PrinterSettings/IRA3D/Poetry Infinity/config.ini
2016-03-18 10:39:06 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reset Password
Translated:Reset Password
refactoring easier to make 2 part connected vertex sources
2016-03-20 14:34:55 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reset to Defaults
Translated:Reset to Defaults
refactoring easier to make 2 part connected vertex sources
2016-03-20 14:34:55 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reset to Factory Defaults
Translated:Reset to Factory Defaults
refactoring easier to make 2 part connected vertex sources
2016-03-20 14:34:55 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reset View
Translated:Reset View
refactoring easier to make 2 part connected vertex sources
2016-03-20 14:34:55 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
Translated:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
refactoring easier to make 2 part connected vertex sources
2016-03-20 14:34:55 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Resolution
Translated:Resolution
Getting print history to register on connection then checking if need to resume failed print
2016-04-14 14:34:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Restore
Translated:Restore
Better end of lie trimming. Make the extrusion setting correct on resume.
2016-04-19 15:14:22 -07:00
Json Profiles
2016-04-18 11:31:31 -07:00
English:Restore Default
Translated:Restore Default
Working on resuming for non-max z printers Added settings to support resuming Save the baby step offset for print resuming Make sure we don't resume prints that are not started Refactoring
2016-04-20 11:53:08 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Restore Settings
Translated:Restore Settings
Json Profiles
2016-04-18 11:31:31 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Resume
Translated:Resume
Put in the Restore All menu Made text wrap in the slice settings Took out manual wrapping for slice settings
2016-04-22 17:30:34 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Resume automatic heater shutdown
Translated:Resume automatic heater shutdown
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Resume G-Code
Translated:Resume G-Code
Put in the Restore All menu Made text wrap in the slice settings Took out manual wrapping for slice settings
2016-04-22 17:30:34 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Resume Print
Translated:Resume Print
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retract
Translated:Retract
Put in the Restore All menu Made text wrap in the slice settings Took out manual wrapping for slice settings
2016-04-22 17:30:34 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retract Acceleration
Translated:Retract Acceleration
Put in a before tool change gcode property
2016-04-25 16:42:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retract filament
Translated:Retract filament
Put in a before tool change gcode property
2016-04-25 16:42:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retract Length
Translated:Retract Length
Put in a before tool change gcode property
2016-04-25 16:42:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retract When Changing Islands
Translated:Retract When Changing Islands
created option to have value that reset at the end of a print spiral vase bottom clip layer to pause
2016-04-26 09:20:31 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retraction
Translated:Retraction
created option to have value that reset at the end of a print spiral vase bottom clip layer to pause
2016-04-26 09:20:31 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retractions
Translated:Retractions
created option to have value that reset at the end of a print spiral vase bottom clip layer to pause
2016-04-26 09:20:31 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retrieving download info...
Translated:Retrieving download info...
Made the settings reset when clearing user settings Changed RegisterForSettingsChange to SetingChanged event Fixed z offset for jump start printer
2016-04-26 17:15:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retrieving sync information...
Translated:Retrieving sync information...
Converted lots of get properties to methods in SettingsProfile
2016-04-27 18:57:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Retry Login
Translated:Retry Login
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Revert
Translated:Revert
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Revert Settings
Translated:Revert Settings
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Reverting firmware to previous version...
Translated:Reverting firmware to previous version...
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Localize mouse terms - Issue MatterHackers/MCCentral#3559
2018-06-11 13:11:38 -07:00
English:Right
Translated:Right
Update master.txt
2018-06-08 14:15:29 -07:00
English:Right Arrow
Translated:Right Arrow
Localize mouse terms - Issue MatterHackers/MCCentral#3559
2018-06-11 13:11:38 -07:00
English:right drag
Translated:right drag
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Ring
Translated:Ring
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Rotate
Translated:Rotate
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Rotate (Alt + Left Mouse)
Translated:Rotate (Alt + Left Mouse)
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Rotate View
Translated:Rotate View
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Rubber Band Selection
Translated:Rubber Band Selection
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Run Calibration
Translated:Run Calibration
Update master.txt
2018-06-08 14:15:29 -07:00
English:Run Max if Below
Translated:Run Max if Below
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Run setup configuration for printer.
Translated:Run setup configuration for printer.
Cleaned up the settings layout.
2016-04-28 12:48:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:s
Translated:s
Made a new MenuItemColorStatesView that only changes colors. Made DropDownMenu use the color changing menu states Fixed a bug in the bread crumb renderer Making the library options available all the time in a menu
2016-04-29 18:16:08 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sailfish Communication
Translated:Sailfish Communication
Fixes #707 Double press pause button causes fail Working on a new interface to allow moving items in the library.
2016-05-04 12:14:10 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Sample Points
Translated:Sample Points
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sample the bed at {0} points
Translated:Sample the bed at {0} points
Fixes #707 Double press pause button causes fail Working on a new interface to allow moving items in the library.
2016-05-04 12:14:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sampled Positions
Translated:Sampled Positions
Fixes #707 Double press pause button causes fail Working on a new interface to allow moving items in the library.
2016-05-04 12:14:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Save
Translated:Save
Fixes #707 Double press pause button causes fail Working on a new interface to allow moving items in the library.
2016-05-04 12:14:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Save As
Translated:Save As
Fixed the arrow icons to render correctly.
2016-05-10 14:53:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Save New Design
Translated:Save New Design
Fixed the arrow icons to render correctly.
2016-05-10 14:53:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Save Parts Sheet
Translated:Save Parts Sheet
Fixed the arrow icons to render correctly.
2016-05-10 14:53:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Save to EEProm
Translated:Save to EEProm
Make sure clicking the revert user settings button refreshes required displays Default to min homing (more common) Invert the colors of the gear icon Fixes MatterHackers/MCentral#79 Fixes MatterHackers/MCentral#97
2016-05-12 10:57:41 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Save To EEPROM
Translated:Save To EEPROM
Put in a hack for the printer edit button.
2016-05-13 14:23:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Saving
Translated:Saving
Working on better printer editing behavior
2016-05-16 17:11:49 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Saving
Translated:Saving
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Saving Asset
Translated:Saving Asset
English:Saving changes
Translated:Saving changes
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Saving Changes
Translated:Saving Changes
Put in a delete printer button.
2016-05-17 15:50:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Saving to Parts Sheet
Translated:Saving to Parts Sheet
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Scale
Translated:Scale
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:SD Card
Translated:SD Card
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Search
Translated:Search
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Search Google
Translated:Search Google
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Search Results
Translated:Search Results
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:seconds
Translated:seconds
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Select
Translated:Select
Update master.txt
2018-06-08 14:15:29 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select A Folder
Translated:Select A Folder
Unified the android and desktop setup wizard classes
2016-06-01 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select a new Destination
Translated:Select a new Destination
Latest agg and ms
2016-06-06 11:22:08 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Select a printer to continue
Translated:Select a printer to continue
Latest translations
2018-12-27 17:17:38 -08:00
English:Select Filament Wizard
Translated:Select Filament Wizard
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select Make
Translated:Select Make
Latest agg and ms
2016-06-06 11:22:08 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Select Material
Translated:Select Material
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select Model
Translated:Select Model
Got the new printer setup wizards back to working.
2016-06-07 14:27:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select Part
Translated:Select Part
Got the new printer setup wizards back to working.
2016-06-07 14:27:37 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Select Printer
Translated:Select Printer
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select the baud rate.
Translated:Select the baud rate.
Got the new printer setup wizards back to working.
2016-06-07 14:27:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select the material you are printing
Translated:Select the material you are printing
Got the new printer setup wizards back to working.
2016-06-07 14:27:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select the printer manufacturer
Translated:Select the printer manufacturer
Add missing L10N strings
2016-06-07 17:24:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select the printer model
Translated:Select the printer model
Add missing L10N strings
2016-06-07 17:24:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Select What to Import
Translated:Select What to Import
Add missing L10N strings
2016-06-07 17:24:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Selection
Translated:Selection
Made MatterControl top export Fixed some profile import stuff
2016-06-09 18:16:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Send
Translated:Send
Made MatterControl top export Fixed some profile import stuff
2016-06-09 18:16:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Send email notifications
Translated:Send email notifications
Made MatterControl top export Fixed some profile import stuff
2016-06-09 18:16:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Send SMS notifications
Translated:Send SMS notifications
Moved default settings into Properties.json and removed default config.ini deleted some dead code updated some error messages
2016-06-13 12:31:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Send With Checksum
Translated:Send With Checksum
Moved default settings into Properties.json and removed default config.ini deleted some dead code updated some error messages
2016-06-13 12:31:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Serial Port
Translated:Serial Port
Revise Settings.json changes - Reuse SliceSettingsOrganizer.GetDefaultSettings - Remove SavePropertiesJson
2016-06-13 13:40:29 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Serial port in use
Translated:Serial port in use
more work on import
2016-06-14 12:55:19 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Services
Translated:Services
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Session Cleared
Translated:Session Cleared
more work on import
2016-06-14 12:55:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Session Expired
Translated:Session Expired
more work on import
2016-06-14 12:55:19 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Set as Default
Translated:Set as Default
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sets MatterControl to attempt to connect to a printer over the network. (You must disconnect and reconnect for this to take effect)
Translated:Sets MatterControl to attempt to connect to a printer over the network. (You must disconnect and reconnect for this to take effect)
more work on import
2016-06-14 12:55:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sets MatterControl to use s3g communication method. (You must disconnect and reconnect for this to take effect)
Translated:Sets MatterControl to use s3g communication method. (You must disconnect and reconnect for this to take effect)
more work on import
2016-06-14 12:55:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sets the models that will be added to the queue when a new printer is created.
Translated:Sets the models that will be added to the queue when a new printer is created.
more work on import
2016-06-14 12:55:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sets the size of the outer solid surface (perimeter) for the entire print.
Translated:Sets the size of the outer solid surface (perimeter) for the entire print.
Improving import wizard Made a new success page for the input wizard Made cancel file selection do the right thing Update profile selector on add Load from ini can handle a bad ini file now
2016-06-15 11:49:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Settings
Translated:Settings
Improving import wizard Made a new success page for the input wizard Made cancel file selection do the right thing Update profile selector on add Load from ini can handle a bad ini file now
2016-06-15 11:49:57 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Setup Needs to be Run
Translated:Setup Needs to be Run
English:Setup needs to be run before printing
Translated:Setup needs to be run before printing
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Setup Wizard
Translated:Setup Wizard
Make sure the printer select menu says 'Printers...'
2016-06-16 12:53:44 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Setup...
Translated:Setup...
Now we can import a .ini or .slice file into a quality preset.
2016-06-20 12:47:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Shaded
Translated:Shaded
Now we can import a .ini or .slice file into a quality preset.
2016-06-20 12:47:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Share
Translated:Share
Now we can import a .ini or .slice file into a quality preset.
2016-06-20 12:47:10 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Share Code
Translated:Share Code
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Share Library Item
Translated:Share Library Item
Import merge from .printer starting to work. Ability to center model windows
2016-06-20 15:45:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Share Options
Translated:Share Options
Import merge from .printer starting to work. Ability to center model windows
2016-06-20 15:45:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Share Temperature
Translated:Share Temperature
Import merge from .printer starting to work. Ability to center model windows
2016-06-20 15:45:17 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Share with someone
Translated:Share with someone
Import into new preset layer
2016-06-21 16:36:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Shared with Me
Translated:Shared with Me
Import into new preset layer
2016-06-21 16:36:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Show Controls
Translated:Show Controls
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show file in folder after save
Translated:Show file in folder after save
Import into new preset layer
2016-06-21 16:36:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Firmware Updater
Translated:Show Firmware Updater
Improving setup experience. issue #917
2016-06-21 18:55:34 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Help
Translated:Show Help
Improving setup experience. issue #917
2016-06-21 18:55:34 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Materials
Translated:Show Materials
Improving setup experience. issue #917
2016-06-21 18:55:34 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Password
Translated:Show Password
Improving setup experience. issue #917
2016-06-21 18:55:34 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Print Area
Translated:Show Print Area
Improving setup experience. issue #917
2016-06-21 18:55:34 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Print Bed
Translated:Show Print Bed
Improving setup experience. issue #917
2016-06-21 18:55:34 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Reset Connection
Translated:Show Reset Connection
Make sure we don't create a macro name that is wrapped or too big.
2016-06-23 12:12:01 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Show Speeds
Translated:Show Speeds
Fixed a null reference in libraryDataView Working on more consistent wizard theming
2016-06-23 16:01:04 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Show Terminal
Translated:Show Terminal
Fixed a null reference in libraryDataView Working on more consistent wizard theming
2016-06-23 16:01:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
Translated:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
Fixed a null reference in libraryDataView Working on more consistent wizard theming
2016-06-23 16:01:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:sign in
Translated:sign in
Bringing in the work from unlimitedbacon #1026 Adding density setting to filament Adding cost option to filament
2016-07-05 12:24:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sign in
Translated:Sign in
Bringing in the work from unlimitedbacon #1026 Adding density setting to filament Adding cost option to filament
2016-07-05 12:24:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sign in Required
Translated:Sign in Required
Bringing in the work from unlimitedbacon #1026 Adding density setting to filament Adding cost option to filament
2016-07-05 12:24:00 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Sign in to access your existing printers
Translated:Sign in to access your existing printers
Bringing in the work from unlimitedbacon #1026 Adding density setting to filament Adding cost option to filament
2016-07-05 12:24:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sign in to my account
Translated:Sign in to my account
Bringing in the work from unlimitedbacon #1026 Adding density setting to filament Adding cost option to filament
2016-07-05 12:24:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sign in to your MatterControl account
Translated:Sign in to your MatterControl account
Bringing in the work from unlimitedbacon #1026 Adding density setting to filament Adding cost option to filament
2016-07-05 12:24:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sign Out
Translated:Sign Out
Made the SetupAccountView refresh on login and log out Refactoring Event Handlers
2016-07-06 14:04:23 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sign Out?
Translated:Sign Out?
Don't allow change printer while printing. Don't allow login or logout while printing.
2016-07-06 16:40:23 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sign Up for an Account
Translated:Sign Up for an Account
Don't allow change printer while printing. Don't allow login or logout while printing.
2016-07-06 16:40:23 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Size and Coordinates
Translated:Size and Coordinates
Don't allow change printer while printing. Don't allow login or logout while printing.
2016-07-06 16:40:23 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Skip
Translated:Skip
Updated login reasons
2016-07-08 16:28:58 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Skip Connection Setup
Translated:Skip Connection Setup
Wrote a new test for first_layer_extrusion_width being parsed correctly Refactored first_layer_extrusion_width into a fixed string
2016-07-12 18:06:06 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Skirt
Translated:Skirt
Merge branch 'master' of https://github.com/MatterHackers/MatterControl Conflicts: DataStorage/Classic/ClassicSqlitePrinterProfiles.cs
2016-07-14 11:39:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Skirt Height
Translated:Skirt Height
Correct padding.
2016-07-15 12:16:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:skirts
Translated:skirts
Correct padding.
2016-07-15 12:16:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slice
Translated:Slice
Correct padding.
2016-07-15 12:16:51 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slice Error
Translated:Slice Error
Updating the help menu
2016-07-15 12:43:46 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slice Presets Editor
Translated:Slice Presets Editor
Updating the help menu
2016-07-15 12:43:46 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slice Settings
Translated:Slice Settings
Updating the help menu
2016-07-15 12:43:46 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slicing
Translated:Slicing
Created Wizard Page to Sync Profiles after log in. Prompt to log in now Properly launched if no user is logged in and sync only called if user is logged in Removed comments from PrinterProfileHistoryPage that were meant to outline process
2016-07-18 14:00:53 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slicing Item
Translated:Slicing Item
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slicing Options
Translated:Slicing Options
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Slow Down If Layer Print Time Is Below
Translated:Slow Down If Layer Print Time Is Below
Make sure we are checking PrinterSelected rather than ActiveSliceSettings.Instance == null The later does not happen anymore.
2016-07-21 15:05:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Small Perimeters
Translated:Small Perimeters
Make sure we are checking PrinterSelected rather than ActiveSliceSettings.Instance == null The later does not happen anymore.
2016-07-21 15:05:59 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Smooth Path
Translated:Smooth Path
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Snap Grid
Translated:Snap Grid
Changed upload to sync Go to driver install rather than not Make sure delete printer updates settings view Printer History -> Settings History Make Settings Options menu not too big Border on Delete Printer button
2016-07-21 17:15:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Software License Agreement
Translated:Software License Agreement
Made the profile history page read better.
2016-07-22 17:49:03 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Solid Infill
Translated:Solid Infill
Networked Printing enabled in MC - Added properties to enable s3g coms, enable networked communication, store IP and port - updated Settings on Change to be a dictionary that stores what they are changing and how to do it - added handling in check box for SettingsOnChange - SerialPortIsAvailable returns true when networked printing is enabled - Engine mapping base updated for new properties
2016-07-29 14:48:41 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Some features may require an internet connection.
Translated:Some features may require an internet connection.
Networked Printing enabled in MC - Added properties to enable s3g coms, enable networked communication, store IP and port - updated Settings on Change to be a dictionary that stores what they are changing and how to do it - added handling in check box for SettingsOnChange - SerialPortIsAvailable returns true when networked printing is enabled - Engine mapping base updated for new properties
2016-07-29 14:48:41 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sometime a mesh will not have closed a perimeter. When this is checked these non-closed perimeters while be closed.
Translated:Sometime a mesh will not have closed a perimeter. When this is checked these non-closed perimeters while be closed.
Clear one time settings on import from DB Make sure we don't show create printers if imported printers from DB Make sure we don't crash if can't find date in oemlayer
2016-07-28 16:36:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Must be a valid email address.
Translated:Sorry! Must be a valid email address.
Networked Printing enabled in MC - Added properties to enable s3g coms, enable networked communication, store IP and port - updated Settings on Change to be a dictionary that stores what they are changing and how to do it - added handling in check box for SettingsOnChange - SerialPortIsAvailable returns true when networked printing is enabled - Engine mapping base updated for new properties
2016-07-29 14:48:41 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Must be a valid U.S. or Canadian phone number.
Translated:Sorry! Must be a valid U.S. or Canadian phone number.
Networked Printing enabled in MC - Added properties to enable s3g coms, enable networked communication, store IP and port - updated Settings on Change to be a dictionary that stores what they are changing and how to do it - added handling in check box for SettingsOnChange - SerialPortIsAvailable returns true when networked printing is enabled - Engine mapping base updated for new properties
2016-07-29 14:48:41 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! We weren't able to submit your request.
Translated:Sorry! We weren't able to submit your request.
Made leveling settings editable when not connected
2016-07-29 09:44:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Looks like an account already exists for that email address.
Translated:Sorry! Looks like an account already exists for that email address.
Made leveling settings editable when not connected
2016-07-29 09:44:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Looks like an account already exists for that username.
Translated:Sorry! Looks like an account already exists for that username.
Made leveling settings editable when not connected
2016-07-29 09:44:16 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Looks like that reset code has expired.
Translated:Sorry! Looks like that reset code has expired.
A few more tests passing.
2016-08-02 09:47:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Looks like that reset code is invalid.
Translated:Sorry! Looks like that reset code is invalid.
Made the app report that an update is required if the server says it is.
2016-08-03 14:45:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Too many sign in attempts. Please try again later.
Translated:Sorry! Too many sign in attempts. Please try again later.
Added an import printer menu Fixed a alignment problem with the top menus
2016-08-05 11:44:22 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! Unable to connect to server. Please try again later.
Translated:Sorry! Unable to connect to server. Please try again later.
Fixed a bug with pause resume gcode Made a new test. added test layouts.txt and master.txt and porperties.json added paus_gcode and resume_gcode to settingskey
2016-08-17 14:04:03 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sorry! We couldn't find that account.
Translated:Sorry! We couldn't find that account.
changed get("ClientToken") GetClientToken()
2016-08-26 18:30:21 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Source
Translated:Source
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Specifies that the firmware has support for ros_0 endstop reporting on M119. TRIGGERED state defines filament has runout. If runout is detected the printers pause G-Code is run.
Translated:Specifies that the firmware has support for ros_0 endstop reporting on M119. TRIGGERED state defines filament has runout. If runout is detected the printers pause G-Code is run.
changed get("ClientToken") GetClientToken()
2016-08-26 18:30:21 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Speed
Translated:Speed
changed get("ClientToken") GetClientToken()
2016-08-26 18:30:21 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Speed at 0.025 Height
Translated:Speed at 0.025 Height
Changed Login -> Sign in & Logout -> Sign Out
2016-08-29 17:13:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Speed at 0.1 Height
Translated:Speed at 0.1 Height
Changed Login -> Sign in & Logout -> Sign Out
2016-08-29 17:13:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Speed for Infill
Translated:Speed for Infill
Changed Login -> Sign in & Logout -> Sign Out
2016-08-29 17:13:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Speed for Perimeters
Translated:Speed for Perimeters
Changed Login -> Sign in & Logout -> Sign Out
2016-08-29 17:13:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Speed Multiplier
Translated:Speed Multiplier
Changed Login -> Sign in & Logout -> Sign Out
2016-08-29 17:13:45 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Speeds
Translated:Speeds
added "Don't ask me again" to ShowAuthPanel.
2016-08-29 22:04:09 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sphere
Translated:Sphere
added "Don't ask me again" to ShowAuthPanel.
2016-08-29 22:04:09 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Spiral Vase
Translated:Spiral Vase
Copy the thumbnail image, for the default queue parts if available Fixed spelling Made the ray tracer multi thread when not printing Changed 'don't ask me again' to 'don't remind me again' Added a thumbnail for the MatterControl coin
2016-09-02 16:26:56 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Split
Translated:Split
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Stable
Translated:Stable
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Stable: The current release version of MatterControl (recommended)
Translated:Stable: The current release version of MatterControl (recommended)
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start
Translated:Start
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start At Concave Points
Translated:Start At Concave Points
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start At Non Overhang
Translated:Start At Non Overhang
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start each new layer from a different vertex to reduce seams.
Translated:Start each new layer from a different vertex to reduce seams.
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start End Overlap
Translated:Start End Overlap
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start G-Code
Translated:Start G-Code
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start G-Code cannot contain G29 if Print Leveling is enabled.
Translated:Start G-Code cannot contain G29 if Print Leveling is enabled.
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start G-Code cannot contain G29 if Print Recovery is enabled.
Translated:Start G-Code cannot contain G29 if Print Recovery is enabled.
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start G-Code cannot contain G30 if Print Leveling is enabled.
Translated:Start G-Code cannot contain G30 if Print Leveling is enabled.
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start Height
Translated:Start Height
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings
2016-09-07 10:00:15 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Start Print
Translated:Start Print
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings
2016-09-07 10:00:15 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Starting Angle
Translated:Starting Angle
Somehow missed the file delete
2016-09-10 12:30:53 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Starting firmware update...
Translated:Starting firmware update...
Somehow missed the file delete
2016-09-10 12:30:53 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Starting Sync
Translated:Starting Sync
Update master.txt
2018-06-08 14:15:29 -07:00
English:Startup Failure
Translated:Startup Failure
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Stay Connected
Translated:Stay Connected
Somehow missed the file delete
2016-09-10 12:30:53 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Step
Translated:Step
Last changes to loged in drop down
2016-09-16 11:36:42 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Steps per mm
Translated:Steps per mm
Last changes to loged in drop down
2016-09-16 11:36:42 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:STL File
Translated:STL File
Last changes to loged in drop down
2016-09-16 11:36:42 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Stop trying to connect to the printer.
Translated:Stop trying to connect to the printer.
Improvements to UI language
2016-10-04 16:36:40 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Store
Translated:Store
Update master.txt
2018-06-08 14:15:29 -07:00
English:Subject
Translated:Subject
Improvements to UI language
2016-10-04 16:36:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Submit
Translated:Submit
Improvements to UI language
2016-10-04 16:36:40 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Submit Feedback
Translated:Submit Feedback
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Submitting your information...
Translated:Submitting your information...
Improvements to UI language
2016-10-04 16:36:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Subtract
Translated:Subtract
Always set make and model on imported printers Made the import printer get non-colliding names MatterHackers/MCCentral#417 MatterControl is unable to upload imported printers
2016-10-04 17:54:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Subtract & Replace
Translated:Subtract & Replace
Warn if printer recovery is enabled and there is a g29 or g30 in start gcode
2016-10-05 11:06:40 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Success
Translated:Success
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Success! Please check your email for the reset code.
Translated:Success! Please check your email for the reset code.
Warn if printer recovery is enabled and there is a g29 or g30 in start gcode
2016-10-05 11:06:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Success! Your account has been created.
Translated:Success! Your account has been created.
Warn if printer recovery is enabled and there is a g29 or g30 in start gcode
2016-10-05 11:06:40 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Success! Your password has been updated.
Translated:Success! Your password has been updated.
Fixed a bug in getting extruder temps Made temperature a settings key MatterHackers/MCCentral#553 Extruder and bed not being heated before printing
2016-10-10 12:44:22 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Success!\n\nYour filament should now be loaded
Translated:Success!\n\nYour filament should now be loaded
English:Success!\n\nYour filament should now be unloaded
Translated:Success!\n\nYour filament should now be unloaded
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support
Translated:Support
Code to enable going below 0 for printe recovery
2016-10-10 19:30:48 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support Everywhere
Translated:Support Everywhere
Don't apply the scale directly now that we don't record the original size. Don't set this automatically.
2016-10-12 17:50:08 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support Interface Extruder
Translated:Support Interface Extruder
Can exit while printing from SD Card.
2016-10-20 09:55:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support Material
Translated:Support Material
Can exit while printing from SD Card.
2016-10-20 09:55:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support Material Extruder
Translated:Support Material Extruder
Connection Wizard changes.
2016-10-26 17:35:54 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support Options
Translated:Support Options
Put in the ability to turn off Merge Overlapping Lines Fixes a possible regression in slicing
2016-10-27 18:36:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support Percent
Translated:Support Percent
Put in the ability to turn off Merge Overlapping Lines Fixes a possible regression in slicing
2016-10-27 18:36:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Support Type
Translated:Support Type
Change wording to 'Restore Settings'
2016-10-28 16:31:50 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Surfaced Editor
Translated:Surfaced Editor
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Switch
Translated:Switch
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Switch the settings interface to one intended for SLA printers.
Translated:Switch the settings interface to one intended for SLA printers.
Made a function to filter com port names for mac Change the text in basic mode
2016-11-02 15:56:27 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Switch to new G-Code?
Translated:Switch to new G-Code?
English:Sync Complete
Translated:Sync Complete
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sync Dashboard
Translated:Sync Dashboard
Made a function to filter com port names for mac Change the text in basic mode
2016-11-02 15:56:27 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Sync Printers
Translated:Sync Printers
Getting Enter Share Code Window themed correctly.
2016-11-15 13:08:16 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Sync To Print
Translated:Sync To Print
Getting Enter Share Code Window themed correctly.
2016-11-15 13:08:16 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Syncing Printer Profiles...
Translated:Syncing Printer Profiles...
Load and Unload Macros working better. Fixed colors on redeem purchase disabled button
2016-11-29 14:17:37 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Tee
Translated:Tee
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Temp Lower Amount
Translated:Temp Lower Amount
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:temperature
Translated:temperature
New translation strings
2016-12-01 19:12:03 -08:00
Latest translations
2018-12-27 17:17:38 -08:00
English:Temperature
Translated:Temperature
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Temperatures
Translated:Temperatures
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Terminal
Translated:Terminal
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Test Parts
Translated:Test Parts
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:TestPart
Translated:TestPart
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Text
Translated:Text
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Text Size
Translated:Text Size
New translation strings
2016-12-01 19:12:03 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Thank you! Your information has been submitted.
Translated:Thank you! Your information has been submitted.
New translation strings
2016-12-01 19:12:03 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The {0} can only go as high as 100%.
Translated:The {0} can only go as high as 100%.
English:The {0} must be at least 1.
Translated:The {0} must be at least 1.
English:The {0} must be between 0 and 1.
Translated:The {0} must be between 0 and 1.
English:The {0} must be greater than 0.
Translated:The {0} must be greater than 0.
Make pause work correctly with always printing
2016-12-02 13:51:58 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The actual diameter of the filament used for printing.
Translated:The actual diameter of the filament used for printing.
make sure we can go back to default (and test) change default to none
2016-12-06 18:12:57 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The amount of filament to insert into the printer when loading.
Translated:The amount of filament to insert into the printer when loading.
Put in the action menus and controls.
2016-12-08 15:39:23 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The amount of filament to remove from the printer while unloading.
Translated:The amount of filament to remove from the printer while unloading.
Get the starting color set correctly Made the android printer select window fix its colors on change
2016-12-09 10:40:01 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The amount of infill material to generate, expressed as a ratio or a percentage.
Translated:The amount of infill material to generate, expressed as a ratio or a percentage.
Refactored network printing settings to match the other printer settings Took out the automatic changes to other settings
2016-12-12 12:14:30 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The amount the infill edge will push into the perimeter. Helps ensure the infill is connected to the edge. This can be expressed as a percentage of the Nozzle Diameter.
Translated:The amount the infill edge will push into the perimeter. Helps ensure the infill is connected to the edge. This can be expressed as a percentage of the Nozzle Diameter.
Refactoring menus for consistency.
2016-12-12 14:35:34 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The angle at which the support material lines will be drawn.
Translated:The angle at which the support material lines will be drawn.
Interactive user prompts should confirm the action requested
2016-12-12 17:42:22 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The angle of the infill, measured from the X axis. Not used when bridging.
Translated:The angle of the infill, measured from the X axis. Not used when bridging.
Interactive user prompts should confirm the action requested
2016-12-12 17:42:22 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
Translated:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
Added recovery count to the history data MatterHackers/MCCentral#914 Track the recovered count to aid diagnostics
2016-12-14 11:26:53 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The date this file was originally created.
Translated:The date this file was originally created.
Update translations
2018-07-13 09:02:22 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The diameter of the extruder's nozzle.
Translated:The diameter of the extruder's nozzle.
Added recovery count to the history data MatterHackers/MCCentral#914 Track the recovered count to aid diagnostics
2016-12-14 11:26:53 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance between support material lines.
Translated:The distance between support material lines.
Added recovery count to the history data MatterHackers/MCCentral#914 Track the recovered count to aid diagnostics
2016-12-14 11:26:53 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
Translated:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
More localizations
2016-12-16 15:25:00 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
Translated:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
More localizations
2016-12-16 15:25:00 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance filament will reverse before each qualifying non-print move
Translated:The distance filament will reverse before each qualifying non-print move
More localizations
2016-12-16 15:25:00 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:The distance from the model at which the first skirt loop is drawn.
Translated:The distance from the model at which the first skirt loop is drawn.
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
Translated:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance the nozzle will lift after each retraction.
Translated:The distance the nozzle will lift after each retraction.
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance the support material will be from the object in the X and Y directions.
Translated:The distance the support material will be from the object in the X and Y directions.
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance the z probe is from the extruder in x and y.
Translated:The distance the z probe is from the extruder in x and y.
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance the z probe is from the extruder in z. For manual probing, this is thickness of the paper (or other calibration device).
Translated:The distance the z probe is from the extruder in z. For manual probing, this is thickness of the paper (or other calibration device).
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The distance to move the nozzle along the Z axis to ensure that it is the correct distance from the print bed. A positive number will raise the nozzle, and a negative number will lower it.
Translated:The distance to move the nozzle along the Z axis to ensure that it is the correct distance from the print bed. A positive number will raise the nozzle, and a negative number will lower it.
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The distance to travel after completing a perimeter to improve seams.
Translated:The distance to travel after completing a perimeter to improve seams.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The extra distance the raft will extend around the edge of the part.
Translated:The extra distance the raft will extend around the edge of the part.
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Made firmware updater report state into terminal Refactoring Firmware update strings
2016-12-28 13:10:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The geometric shape of the support structure for the inside of parts.
Translated:The geometric shape of the support structure for the inside of parts.
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.
Translated:The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The index of the extruder to use for printing support material. Applicable only when Extruder Count is set to a value more than 1.
Translated:The index of the extruder to use for printing support material. Applicable only when Extruder Count is set to a value more than 1.
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The index of the extruder to use for support material interface layer(s).
Translated:The index of the extruder to use for support material interface layer(s).
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The index of the extruder to use to print the raft. Set to 0 to use the support extruder index.
Translated:The index of the extruder to use to print the raft. Set to 0 to use the support extruder index.
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Latest translations
2018-12-27 17:17:38 -08:00
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
Translated:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Update localization
2018-08-06 15:33:00 -07:00
English:The Markdown that will be shown on the Clean Filament page.
Translated:The Markdown that will be shown on the Clean Filament page.
English:The Markdown that will be shown on the Insert Filament page.
Translated:The Markdown that will be shown on the Insert Filament page.
English:The Markdown that will be shown on the Trim Filament page.
Translated:The Markdown that will be shown on the Trim Filament page.
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The maximum amount the printer can accelerate on a G-Code move.
Translated:The maximum amount the printer can accelerate on a G-Code move.
Expanded translation set Made more settings be count or mm made more buttons translated
2017-01-04 10:25:19 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
Translated:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
Saving and restoring baby stepping
2017-01-04 15:35:38 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The maximum speed that the printer treats as 0 and changes direction instantly.
Translated:The maximum speed that the printer treats as 0 and changes direction instantly.
Saving and restoring baby stepping
2017-01-04 15:35:38 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The maximum speed the printer can move.
Translated:The maximum speed the printer can move.
Added translation line.
2017-01-09 17:37:43 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
Translated:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
Make sure we work with the new marline rc8 and resend
2017-01-11 17:08:36 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The minimum distance of a non-print move which will trigger a retraction.
Translated:The minimum distance of a non-print move which will trigger a retraction.
Make sure we work with the new marline rc8 and resend
2017-01-11 17:08:36 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The minimum feature size to consider from the model. Leave at 0 to use all the model detail.
Translated:The minimum feature size to consider from the model. Leave at 0 to use all the model detail.
Put in error for external perimeter being bad value. MatterHackers/MatterControl#1841 Outside Perimeters (Extrusion Width) setting does not have an error for invalid entries
2017-01-30 16:45:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The minimum length of filament that must be extruded before a retraction can occur.
Translated:The minimum length of filament that must be extruded before a retraction can occur.
Put in error for external perimeter being bad value. MatterHackers/MatterControl#1841 Outside Perimeters (Extrusion Width) setting does not have an error for invalid entries
2017-01-30 16:45:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value.
Translated:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value.
Put in error for external perimeter being bad value. MatterHackers/MatterControl#1841 Outside Perimeters (Extrusion Width) setting does not have an error for invalid entries
2017-01-30 16:45:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
Translated:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
Put in error for external perimeter being bad value. MatterHackers/MatterControl#1841 Outside Perimeters (Extrusion Width) setting does not have an error for invalid entries
2017-01-30 16:45:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
Translated:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
Put in error for external perimeter being bad value. MatterHackers/MatterControl#1841 Outside Perimeters (Extrusion Width) setting does not have an error for invalid entries
2017-01-30 16:45:39 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:The next few screens will walk your through calibrating your printer.
Translated:The next few screens will walk your through calibrating your printer.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
Translated:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
Made the probe height a settings value MatterHackers/MatterControl#937 On print leveling setup move up an amount from the previous point, not to an absolute point
2017-02-01 07:54:55 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of degrees Centigrade to lower the temperature of a nozzle while it is not active.
Translated:The number of degrees Centigrade to lower the temperature of a nozzle while it is not active.
Make sure we keep the disable widget on top
2017-02-02 17:06:01 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of extruders the printer has.
Translated:The number of extruders the printer has.
Make sure we keep the disable widget on top
2017-02-02 17:06:01 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of layers for which the layer cooling fan will be forced off at the start of the print.
Translated:The number of layers for which the layer cooling fan will be forced off at the start of the print.
Make sure we keep the disable widget on top
2017-02-02 17:06:01 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Translated:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Make sure we keep the disable widget on top
2017-02-02 17:06:01 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
Translated:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
Better images in macros
2017-02-03 14:41:18 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of layers to consider as the beginning of the print. These will print at initial layer speed.
Translated:The number of layers to consider as the beginning of the print. These will print at initial layer speed.
Improved theme colors bed temp working
2017-02-15 12:14:16 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of layers to draw the skirt.
Translated:The number of layers to draw the skirt.
Made more of the printing window work
2017-02-15 17:43:05 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Translated:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Make the printing screen scale well on t7
2017-02-17 12:06:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
Translated:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
Make the printing screen scale well on t7
2017-02-17 12:06:11 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of loops to draw around parts. Used to provide additional bed adhesion
Translated:The number of loops to draw around parts. Used to provide additional bed adhesion
Make sure we send settings changed event when selecting quality and material settings Wrote a regression test for this
2017-02-22 11:15:51 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number of times to sample each probe position (results will be averaged).
Translated:The number of times to sample each probe position (results will be averaged).
Added terminal to touchscreen controls Moved android override into touchscreen
2017-02-23 12:43:37 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
Translated:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
Adding initializing text to printer warm up more aggressive closing of printing window.
2017-02-23 16:01:41 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The offset of each nozzle relative to the first nozzle. Only useful for multiple extruder machines.
Translated:The offset of each nozzle relative to the first nozzle. Only useful for multiple extruder machines.
Fixing the export button to work correctly.
2017-03-06 17:32:46 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The pattern to draw for the generation of support material.
Translated:The pattern to draw for the generation of support material.
Wrote a new test that ensures we can export library items.
2017-03-07 14:13:35 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The pattern used on the bottom and top layers of the print.
Translated:The pattern used on the bottom and top layers of the print.
Wrote a new test that ensures we can export library items.
2017-03-07 14:13:35 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The percent of the extrusion width that can be overlapped and still generate.
Translated:The percent of the extrusion width that can be overlapped and still generate.
Wrote a new test that ensures we can export library items.
2017-03-07 14:13:35 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
Translated:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
Wrote a new test that ensures we can export library items.
2017-03-07 14:13:35 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The position to measure the probe offset.
Translated:The position to measure the probe offset.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The price of one kilogram of filament. Used for estimating the cost of a print in the Layer View.
Translated:The price of one kilogram of filament. Used for estimating the cost of a print in the Layer View.
Wrote a new test that ensures we can export library items.
2017-03-07 14:13:35 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The print leveling algorithm to use.
Translated:The print leveling algorithm to use.
Wrote a new test that ensures we can export library items.
2017-03-07 14:13:35 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer has a heated bed.
Translated:The printer has a heated bed.
Wrote a new test that ensures we can export library items.
2017-03-07 14:13:35 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer has a layer-cooling fan.
Translated:The printer has a layer-cooling fan.
Put in firmware update options.
2017-04-10 18:01:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer has a SD card reader.
Translated:The printer has a SD card reader.
Put in firmware update options.
2017-04-10 18:01:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer has a servo for lowering and raising the z probe.
Translated:The printer has a servo for lowering and raising the z probe.
Put in firmware update options.
2017-04-10 18:01:19 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer has a z probe for measuring bed level.
Translated:The printer has a z probe for measuring bed level.
Put in auto-calibration measuring if G30 is available
2017-04-11 17:49:23 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
Translated:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
Put in auto-calibration measuring if G30 is available
2017-04-11 17:49:23 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
Translated:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
Made the ability to probe the be with G30 on printers with probe Fixed bug with extrusion multiplier layout Made leveling wizard strings in common class
2017-04-12 12:12:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The printer requires print leveling to run correctly.
Translated:The printer requires print leveling to run correctly.
Made the ability to probe the be with G30 on printers with probe Fixed bug with extrusion multiplier layout Made leveling wizard strings in common class
2017-04-12 12:12:11 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:The printer should now be 'homing'.
Translated:The printer should now be 'homing'.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
Translated:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
Made the ability to probe the be with G30 on printers with probe Fixed bug with extrusion multiplier layout Made leveling wizard strings in common class
2017-04-12 12:12:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The serial driver to use
Translated:The serial driver to use
Made the ability to probe the be with G30 on printers with probe Fixed bug with extrusion multiplier layout Made leveling wizard strings in common class
2017-04-12 12:12:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The serial port communication speed of the printers firmware.
Translated:The serial port communication speed of the printers firmware.
Added ability to sample multiple times on same point.
2017-04-13 17:04:42 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
Translated:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
new notification messages
2017-04-14 12:45:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The serial port to use while connecting to this printer.
Translated:The serial port to use while connecting to this printer.
new notification messages
2017-04-14 12:45:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The shape of the physical print bed.
Translated:The shape of the physical print bed.
new notification messages
2017-04-14 12:45:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which bridging between walls will print.
Translated:The speed at which bridging between walls will print.
new notification messages
2017-04-14 12:45:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which filament will retract and re-extrude.
Translated:The speed at which filament will retract and re-extrude.
new notification messages
2017-04-14 12:45:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which infill will print.
Translated:The speed at which infill will print.
new notification messages
2017-04-14 12:45:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which inside perimeters will print.
Translated:The speed at which inside perimeters will print.
new notification messages
2017-04-14 12:45:47 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which outside, external, or the otherwise visible perimeters will print.
Translated:The speed at which outside, external, or the otherwise visible perimeters will print.
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which support material structures will print.
Translated:The speed at which support material structures will print.
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The speed at which the air gap layer will print.
Translated:The speed at which the air gap layer will print.
Update localization
2018-08-06 15:33:00 -07:00
English:The speed at which the bottom solid layers will print. Can be set explicitly or as a percentage of the Infill speed. Use 0 to match infill speed.
Translated:The speed at which the bottom solid layers will print. Can be set explicitly or as a percentage of the Infill speed. Use 0 to match infill speed.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
Translated:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
Translated:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which the nozzle will move when not extruding material.
Translated:The speed at which the nozzle will move when not extruding material.
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which the nozzle will move when printing the initial layers. If expressed as a percentage the Infill speed is modified.
Translated:The speed at which the nozzle will move when printing the initial layers. If expressed as a percentage the Infill speed is modified.
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which the nozzle will move when recovering a failed print, for 1 layer.
Translated:The speed at which the nozzle will move when recovering a failed print, for 1 layer.
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
Translated:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
first run after commit
2017-05-19 15:14:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed to move the laser when the layer height is 0.025mm. Speed will be adjusted linearly at other heights.
Translated:The speed to move the laser when the layer height is 0.025mm. Speed will be adjusted linearly at other heights.
first run after commit
2017-05-19 15:14:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed to move the laser when the layer height is 0.1mm. Speed will be adjusted linearly at other heights.
Translated:The speed to move the laser when the layer height is 0.1mm. Speed will be adjusted linearly at other heights.
first run after commit
2017-05-19 15:14:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
Translated:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
first run after commit
2017-05-19 15:14:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The speed to run filament into and out of the printer.
Translated:The speed to run filament into and out of the printer.
first run after commit
2017-05-19 15:14:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The starting height (z) of the print head before probing each print level position.
Translated:The starting height (z) of the print head before probing each print level position.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The target temperature the extruder will attempt to reach during the print.
Translated:The target temperature the extruder will attempt to reach during the print.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
Translated:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
Translated:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
Translated:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The temperature to which the nozzle will be heated before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
Translated:The temperature to which the nozzle will be heated before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
Translated:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The thickness of each layer of the print, except the first layer. A smaller number will create more layers and more vertical accuracy but also a slower print.
Translated:The thickness of each layer of the print, except the first layer. A smaller number will create more layers and more vertical accuracy but also a slower print.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The thickness of the first layer. A first layer taller than the default layer thickness can ensure good adhesion to the build plate.
Translated:The thickness of the first layer. A first layer taller than the default layer thickness can ensure good adhesion to the build plate.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:The time it will take to unload the filament
Translated:The time it will take to unload the filament
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The time over which to increase the Extra Length On Restart to its maximum value. Below this time only a portion of the extra length will be applied. Leave 0 to apply the entire amount all the time.
Translated:The time over which to increase the Extra Length On Restart to its maximum value. Below this time only a portion of the extra length will be applied. Leave 0 to apply the entire amount all the time.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:The time to print this G-Code is estimated to be {0} seconds.\n\nPlease check your part for errors if this is unexpected.
Translated:The time to print this G-Code is estimated to be {0} seconds.\n\nPlease check your part for errors if this is unexpected.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The version of G-Code the printer's firmware communicates with. Some firmware use different G and M codes. Setting this ensures that the output G-Code will use the correct commands.
Translated:The version of G-Code the printer's firmware communicates with. Some firmware use different G and M codes. Setting this ensures that the output G-Code will use the correct commands.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
Translated:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
Translated:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:The Z Offset for your printer, sometimes called Baby Stepping, is greater than 2mm and invalid. Clear the value and re-level the bed.
Translated:The Z Offset for your printer, sometimes called Baby Stepping, is greater than 2mm and invalid. Clear the value and re-level the bed.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:The z offset to apply to improve the first layer adhesion.
Translated:The z offset to apply to improve the first layer adhesion.
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Theme
Translated:Theme
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:There is a new update available for download
Translated:There is a new update available for download
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:There is a recommended update available
Translated:There is a recommended update available
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:There is a recommended update available for MatterControl. Would you like to download it now?
Translated:There is a recommended update available for MatterControl. Would you like to download it now?
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:There is a required update available
Translated:There is a required update available
Adjust tab styling - Pass separator bars to tabs, disable drawn borders - Remove ActionBar from leftnav - Remove PrintProgressBar from leftnav - Revise BreadCrumb button attributes - Revise UpFolder icon - Revise overflow/pancake menu icon - Create OverflowButton to encapsulate common menu item - Use horizontal/VerticalLine for consistent color/weight separators - Reduce visual clutter - Minimize regions created by color and line separators - Reduce the contrast of separator lines - Reduce the contrast of region backgrounds - Use consistent background colors across sibling tab pages
2017-05-23 10:51:12 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Thin Walls
Translated:Thin Walls
Selection rect is working much better (test draw)
2017-06-05 15:44:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This code to will provide read-only access.
Translated:This code to will provide read-only access.
Put in a first pass at a text size control.
2017-06-06 15:04:07 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This is a set of regular expressions to apply to lines after they are received from the printer. They will be applied in order to each line received.
Translated:This is a set of regular expressions to apply to lines after they are received from the printer. They will be applied in order to each line received.
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This is a set of regular expressions to apply to lines prior to sending to a printer. They will be applied in the order listed before sending. To return more than one instruction separate them with comma.
Translated:This is a set of regular expressions to apply to lines prior to sending to a printer. They will be applied in the order listed before sending. To return more than one instruction separate them with comma.
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
English:This is the angle that lowers or deploys the z probe.
Translated:This is the angle that lowers or deploys the z probe.
English:This is the angle that raises or stows the z probe.
Translated:This is the angle that raises or stows the z probe.
Update localization
2018-08-06 15:33:00 -07:00
English:This is the make (often the manufacturer) of printer this profile is targeting.
Translated:This is the make (often the manufacturer) of printer this profile is targeting.
English:This is the model of printer this profile is targeting.
Translated:This is the model of printer this profile is targeting.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This is the name of your printer that will be displayed in the choose printer menu.
Translated:This is the name of your printer that will be displayed in the choose printer menu.
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.
Translated:This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This should be in 'G-Code'
Translated:This should be in 'G-Code'
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:This will ensure that filament is able to flow through the nozzle.
Translated:This will ensure that filament is able to flow through the nozzle.
English:This will ensure that no filament is stuck to your nozzle.
Translated:This will ensure that no filament is stuck to your nozzle.
Update master.txt
2018-06-08 14:15:29 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:This will improve the accuracy of print leveling
Translated:This will improve the accuracy of print leveling
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This will improve the accuracy of print leveling.
Translated:This will improve the accuracy of print leveling.
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:This will only work on specific hardware. Do not use unless you are sure your printer controller supports this feature
Translated:This will only work on specific hardware. Do not use unless you are sure your printer controller supports this feature
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Threads
Translated:Threads
Sanitized Master.txt
2017-06-15 17:10:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Thumbnails
Translated:Thumbnails
Refactoring UI 'Options' position and content Made an Options menu Made language apply on select Made touchscreen a toggle
2017-06-15 12:39:59 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Time
Translated:Time
Sanitized Master.txt
2017-06-15 17:10:36 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Time For Extra Length
Translated:Time For Extra Length
Sanitized Master.txt
2017-06-15 17:10:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Time From Start
Translated:Time From Start
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Time Multiplier
Translated:Time Multiplier
Sanitized Master.txt
2017-06-15 17:10:36 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Time to End
Translated:Time to End
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:TM
Translated:TM
Putting in more tool control
2017-06-18 10:27:55 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:To complete the next few steps you will need
Translated:To complete the next few steps you will need
Putting in more tool control
2017-06-18 10:27:55 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:To Folder
Translated:To Folder
Add 'Print' menu action, implement Print for GCode and SD card GCode - Fix and rename CloseShouldNotStopSDPrint test - Fix product bugs regarding selecting and printing GCode
2017-06-21 07:43:40 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Toggle Selection
Translated:Toggle Selection
Update public solution
2017-06-26 13:52:10 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Top Solid Infill
Translated:Top Solid Infill
Add background color to 2D layer view
2017-06-28 18:45:09 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Top Solid Layers
Translated:Top Solid Layers
Add background color to 2D layer view
2017-06-28 18:45:09 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Top/Bottom Fill Pattern
Translated:Top/Bottom Fill Pattern
Latest MatterSlice
2017-06-30 23:38:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Torus
Translated:Torus
Replace emulator with experimental implementation
2017-07-01 18:25:53 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Touch Screen Mode
Translated:Touch Screen Mode
Replace emulator with experimental implementation
2017-07-01 18:25:53 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Transform Wrapper
Translated:Transform Wrapper
English:Translate
Translated:Translate
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Transparent
Translated:Transparent
Replace emulator with experimental implementation
2017-07-01 18:25:53 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Travel
Translated:Travel
Fix spelling errors, add 2D term exception
2017-07-06 18:17:11 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Trim Filament
Translated:Trim Filament
Update localization
2018-08-06 15:33:00 -07:00
English:Trim Filament Page
Translated:Trim Filament Page
Fix spelling errors, add 2D term exception
2017-07-06 18:17:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Try to connect mesh edges when the actual mesh data is not all the way connected.
Translated:Try to connect mesh edges when the actual mesh data is not all the way connected.
Put in the ability to ramp the extra extrusion after move Made the change islands retract always occur if requested.
2017-07-07 08:40:54 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Tuning Adjustment
Translated:Tuning Adjustment
Put in the ability to ramp the extra extrusion after move Made the change islands retract always occur if requested.
2017-07-07 08:40:54 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Turn auto leveling on
Translated:Turn auto leveling on
Put in the ability to ramp the extra extrusion after move Made the change islands retract always occur if requested.
2017-07-07 08:40:54 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Turn off motor current at end of print or after cancel print.
Translated:Turn off motor current at end of print or after cancel print.
Moving to a dynamic Vertex data type
2017-07-18 18:20:04 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Turn on if Below
Translated:Turn on if Below
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Turn retractions on and off.
Translated:Turn retractions on and off.
Moving to a dynamic Vertex data type
2017-07-18 18:20:04 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Turn the fan on and off regardless of settings.
Translated:Turn the fan on and off regardless of settings.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Turns on and off all cooling settings (all settings below this one).
Translated:Turns on and off all cooling settings (all settings below this one).
Moving to a dynamic Vertex data type
2017-07-18 18:20:04 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Uh oh! Passwords do not match.
Translated:Uh oh! Passwords do not match.
Working with auto generated parts
2017-07-28 11:14:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Uh-oh! Could not connect to printer.
Translated:Uh-oh! Could not connect to printer.
Working with auto generated parts
2017-07-28 11:14:25 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unable to Connect
Translated:Unable to Connect
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unable to connect to server
Translated:Unable to connect to server
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unable to Import
Translated:Unable to Import
new localizations
2017-08-04 13:48:24 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Undo
Translated:Undo
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unexpected response
Translated:Unexpected response
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Ungroup
Translated:Ungroup
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unknown
Translated:Unknown
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unknown Reason
Translated:Unknown Reason
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unload
Translated:Unload
new localizations
2017-08-04 13:48:24 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Unload filament
Translated:Unload filament
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unload Filament Length
Translated:Unload Filament Length
new localizations
2017-08-04 13:48:24 -07:00
Update localization
2018-08-06 15:33:00 -07:00
English:Unload Filament Time
Translated:Unload Filament Time
Latest translations
2018-12-27 17:17:38 -08:00
English:Unload Filament Wizard
Translated:Unload Filament Wizard
English:Unload Material
Translated:Unload Material
English:Unloading Filament
Translated:Unloading Filament
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unlock
Translated:Unlock
new localizations
2017-08-04 13:48:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Unsupported Baud Rate
Translated:Unsupported Baud Rate
Localize mouse terms - Issue MatterHackers/MCCentral#3559
2018-06-11 13:11:38 -07:00
English:Up
Translated:Up
Update master.txt
2018-06-08 14:15:29 -07:00
English:Up Arrow
Translated:Up Arrow
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Up one folder
Translated:Up one folder
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Update
Translated:Update
Refactoring VAnchor and HAnchore names Making more debug info for show bounds
2017-08-07 15:47:27 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Update Available
Translated:Update Available
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Update Channel
Translated:Update Channel
Refactoring VAnchor and HAnchore names Making more debug info for show bounds
2017-08-07 15:47:27 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Update In Progress: {0}
Translated:Update In Progress: {0}
Brought in the changes to set temp before leveling.
2017-08-08 17:49:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Update my password
Translated:Update my password
Brought in the changes to set temp before leveling.
2017-08-08 17:49:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Updating firmware...
Translated:Updating firmware...
English:Upload
Translated:Upload
English:Uploading...
Translated:Uploading...
English:Use Automatic Z Probe
Translated:Use Automatic Z Probe
Update master.txt
2018-06-08 14:15:29 -07:00
English:Use cursor keys for axis movements
Translated:Use cursor keys for axis movements
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Use Firmware Retraction
Translated:Use Firmware Retraction
English:Use G0
Translated:Use G0
Brought in the changes to set temp before leveling.
2017-08-08 17:49:26 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Use G0 for moves rather than G1.
Translated:Use G0 for moves rather than G1.
Improving material control.
2017-08-10 12:55:24 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Use Relative E Distances
Translated:Use Relative E Distances
Fixed text size on side tabs
2017-08-14 19:09:37 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
Translated:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
Group command does boolean
2017-08-16 15:36:54 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Used to specify if more than one extruder share a common heater cartridge.
Translated:Used to specify if more than one extruder share a common heater cartridge.
Align tool is working
2017-08-17 15:21:29 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Username
Translated:Username
Make sure we can ungroup meshes Better colors on align pop up
2017-08-17 17:18:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Username or Email
Translated:Username or Email
Make sure we can ungroup meshes Better colors on align pop up
2017-08-17 17:18:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
Translated:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
Make sure we can ungroup meshes Better colors on align pop up
2017-08-17 17:18:33 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Using the above controls
Translated:Using the above controls
Make sure we can ungroup meshes Better colors on align pop up
2017-08-17 17:18:33 -07:00
Put in validate layer height made right button not do design tools check starting bed temp
2017-08-21 15:45:43 -07:00
English:Validate Layer Height
Translated:Validate Layer Height
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Value
Translated:Value
Removing debug info
2017-08-24 15:41:30 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Velocity Paint
Translated:Velocity Paint
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Version
Translated:Version
Removing debug info
2017-08-24 15:41:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Vibration Limit
Translated:Vibration Limit
Improved back to front transparent rendering.
2017-08-25 12:39:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:View Icons
Translated:View Icons
Improved back to front transparent rendering.
2017-08-25 12:39:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:View Just My Settings
Translated:View Just My Settings
Improved back to front transparent rendering.
2017-08-25 12:39:52 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:View Large Icons
Translated:View Large Icons
Made more tests pass deleted unused print status row Made printer connection only have one status message output Made sure the ApplicationTemDataPath is right for tests Refactoring
2017-08-30 10:37:44 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:View List
Translated:View List
Getting more tests passing
2017-08-30 13:41:49 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:View Small Icons
Translated:View Small Icons
Getting more tests passing
2017-08-30 13:41:49 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:View XSmall Icons
Translated:View XSmall Icons
Getting more tests passing
2017-08-30 13:41:49 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Wait For Running Clean
Translated:Wait For Running Clean
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Waiting For Bed To Heat
Translated:Waiting For Bed To Heat
English:Waiting for Bed to Heat to
Translated:Waiting for Bed to Heat to
English:Waiting For Extruder To Heat
Translated:Waiting For Extruder To Heat
English:Waiting for Extruder to Heat to
Translated:Waiting for Extruder to Heat to
Make leveling with probe wizard auto advance when possible cache bsp bed results
2017-09-01 11:48:43 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Waiting For Printer To Heat
Translated:Waiting For Printer To Heat
English:Waiting for the bed to heat to
Translated:Waiting for the bed to heat to
English:Waiting for the hotend to heat to
Translated:Waiting for the hotend to heat to
Make leveling with probe wizard auto advance when possible cache bsp bed results
2017-09-01 11:48:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Warning - GCode file
Translated:Warning - GCode file
Make leveling with probe wizard auto advance when possible cache bsp bed results
2017-09-01 11:48:43 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Warning - No EEProm Mapping
Translated:Warning - No EEProm Mapping
More making printerConnection passed to classes.
2017-09-02 08:36:54 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Warning! The tip of the nozzle will be HOT!
Translated:Warning! The tip of the nozzle will be HOT!
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Warning, very short print
Translated:Warning, very short print
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
Translated:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
Made the update available text show up when available Made the check for update text wrap
2017-09-05 15:44:22 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
Translated:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
Made the update available text show up when available Made the check for update text wrap
2017-09-05 15:44:22 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:WARNING: Write Failed!
Translated:WARNING: Write Failed!
Made the update available text show up when available Made the check for update text wrap
2017-09-05 15:44:22 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:We should be done in approximately {0} minutes.
Translated:We should be done in approximately {0} minutes.
English:We should be done in less than five minutes.
Translated:We should be done in less than five minutes.
Made the update available text show up when available Made the check for update text wrap
2017-09-05 15:44:22 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:We will now finalize our measurement of the extruder height at this position.
Translated:We will now finalize our measurement of the extruder height at this position.
Wrote test for Hotend drop down Theme the folders check box Make sure we reset the macros when we start them (made clear by unload -> cancel -> unload) Made fan controls more consistent with actual data model of printer improved edit number display to be more consistent with 3d number edits
2017-09-07 16:24:11 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:We will now refine our measurement of the extruder height at this position.
Translated:We will now refine our measurement of the extruder height at this position.
Wrote test for Hotend drop down Theme the folders check box Make sure we reset the macros when we start them (made clear by unload -> cancel -> unload) Made fan controls more consistent with actual data model of printer improved edit number display to be more consistent with 3d number edits
2017-09-07 16:24:11 -07:00
Latest translations
2018-12-27 17:17:38 -08:00
English:We will use this paper to measure the distance between the nozzle and the bed.
Translated:We will use this paper to measure the distance between the nozzle and the bed.
Update master.txt
2018-06-08 14:15:29 -07:00
Update translations
2018-07-13 09:02:22 -07:00
English:Website
Translated:Website
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Wedge
Translated:Wedge
Complete rename to UIField
2017-09-13 06:59:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.
Translated:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.
Complete rename to UIField
2017-09-13 06:59:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Welcome to the probe calibration wizard. Here is a quick overview on what we are going to do.
Translated:Welcome to the probe calibration wizard. Here is a quick overview on what we are going to do.
Complete rename to UIField
2017-09-13 06:59:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:What was my password again?
Translated:What was my password again?
agg revert
2017-09-14 16:54:21 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:What's this?
Translated:What's this?
Proof of concept for pinch and bend
2017-09-18 10:08:26 -07:00
Localize mouse terms - Issue MatterHackers/MCCentral#3559
2018-06-11 13:11:38 -07:00
English:wheel
Translated:wheel
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:When this is checked MatterControl will attempt to recover a print in the event of a failure, such as lost connection or lost power.
Translated:When this is checked MatterControl will attempt to recover a print in the event of a failure, such as lost connection or lost power.
Got align for dual extrusion working
2017-09-19 14:01:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:When upgrading to new firmware, first save a backup of the current firmware.
Translated:When upgrading to new firmware, first save a backup of the current firmware.
Got align for dual extrusion working
2017-09-19 14:01:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
Translated:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
Got align for dual extrusion working
2017-09-19 14:01:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Width
Translated:Width
Got align for dual extrusion working
2017-09-19 14:01:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Wifi Setup
Translated:Wifi Setup
Got align for dual extrusion working
2017-09-19 14:01:32 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:wipe
Translated:wipe
More name changes
2017-09-20 16:40:57 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Wipe Shield Distance
Translated:Wipe Shield Distance
Working on new Difference action Modify 3DView tree on UiThread
2017-10-17 09:40:56 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Wipe Tower Size
Translated:Wipe Tower Size
Put in intersection and paint material
2017-10-18 18:03:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Would you like to setup Wifi?
Translated:Would you like to setup Wifi?
Put in intersection and paint material
2017-10-18 18:03:30 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Would you like to switch to the new G-Code? Before you switch, check that your are seeing the changes you expect.
Translated:Would you like to switch to the new G-Code? Before you switch, check that your are seeing the changes you expect.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Write Filter
Translated:Write Filter
Put in intersection and paint material
2017-10-18 18:03:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:X and Y Distance
Translated:X and Y Distance
Put in intersection and paint material
2017-10-18 18:03:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:XY Homing Position
Translated:XY Homing Position
Put in intersection and paint material
2017-10-18 18:03:30 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Yes
Translated:Yes
Made FanControls values go from 0-100 Made all values round trip without changing Made sure we can't get into an update fan loop Made printer connection hold the speed as a double but send as an int Made sure the starting display value of EditableNumberDisplay is correct
2017-11-02 12:26:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
Translated:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
Made FanControls values go from 0-100 Made all values round trip without changing Made sure we can't get into an update fan loop Made printer connection hold the speed as a double but send as an int Made sure the starting display value of EditableNumberDisplay is correct
2017-11-02 12:26:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:You can also
Translated:You can also
Made FanControls values go from 0-100 Made all values round trip without changing Made sure we can't get into an update fan loop Made printer connection hold the speed as a double but send as an int Made sure the starting display value of EditableNumberDisplay is correct
2017-11-02 12:26:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:You can only connect when not currently connected.
Translated:You can only connect when not currently connected.
Made FanControls values go from 0-100 Made all values round trip without changing Made sure we can't get into an update fan loop Made printer connection hold the speed as a double but send as an int Made sure the starting display value of EditableNumberDisplay is correct
2017-11-02 12:26:14 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:You have successfully imported a new {0} setting. You can find '{1}' in your list of {0} settings.
Translated:You have successfully imported a new {0} setting. You can find '{1}' in your list of {0} settings.
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:You have successfully imported a new printer profile. You can find '{0}' in your list of available printers.
Translated:You have successfully imported a new printer profile. You can find '{0}' in your list of available printers.
Made FanControls values go from 0-100 Made all values round trip without changing Made sure we can't get into an update fan loop Made printer connection hold the speed as a double but send as an int Made sure the starting display value of EditableNumberDisplay is correct
2017-11-02 12:26:14 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:You may need to wait a minute for your printer to finish initializing.
Translated:You may need to wait a minute for your printer to finish initializing.
Made FanControls values go from 0-100 Made all values round trip without changing Made sure we can't get into an update fan loop Made printer connection hold the speed as a double but send as an int Made sure the starting display value of EditableNumberDisplay is correct
2017-11-02 12:26:14 -07:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Your 3D print has been auto-paused.\n\nLayer{0} reached.
Translated:Your 3D print has been auto-paused.\n\nLayer{0} reached.
English:Your 3D print has been paused.\n\nOut of filament detected.
Translated:Your 3D print has been paused.\n\nOut of filament detected.
Fix typos
2017-11-04 21:11:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Your application is up-to-date
Translated:Your application is up-to-date
Fix typos
2017-11-04 21:11:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Your code has been redeemed. Please check the Library.
Translated:Your code has been redeemed. Please check the Library.
Fix typos
2017-11-04 21:11:00 -07:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Your Email Address
Translated:Your Email Address
Fix typos
2017-11-04 21:11:00 -07:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Your invite has been sent!
Translated:Your invite has been sent!
improved path planning
2017-11-29 07:24:26 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Your Phone Number
Translated:Your Phone Number
improved path planning
2017-11-29 07:24:26 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Your printer is reporting a HARDWARE ERROR and has been paused. Check the error and cancel the print if required.
Translated:Your printer is reporting a HARDWARE ERROR and has been paused. Check the error and cancel the print if required.
improved path planning
2017-11-29 07:24:26 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Your Probe is now calibrated.
Translated:Your Probe is now calibrated.
improved path planning
2017-11-29 07:24:26 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Your Share Code
Translated:Your Share Code
Set touchscreen mode when creating interface
2017-11-29 21:16:01 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
Translated:Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
Improving ray tracing so we can click tumble widget Fixing warnings
2017-12-04 21:00:39 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Your Start G-Code should not contain a G29 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
Translated:Your Start G-Code should not contain a G29 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
Improving ray tracing so we can click tumble widget Fixing warnings
2017-12-04 21:00:39 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Your Start G-Code should not contain a G30 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
Translated:Your Start G-Code should not contain a G30 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
Improving ray tracing so we can click tumble widget Fixing warnings
2017-12-04 21:00:39 -08:00
Rebuild master.txt - Issue MatterHackers/MCCentral#4472 update localizations
2018-11-02 22:56:04 -07:00
English:Your Start G-Code should not contain a G30 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
Translated:Your Start G-Code should not contain a G30 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
Improving ray tracing so we can click tumble widget Fixing warnings
2017-12-04 21:00:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Z Lift
Translated:Z Lift
Improving ray tracing so we can click tumble widget Fixing warnings
2017-12-04 21:00:39 -08:00
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Z Offset
Translated:Z Offset
English:Z Offset is too large.
Translated:Z Offset is too large.
English:ZIP File
Translated:ZIP File
Update master.txt
2018-06-08 14:15:29 -07:00
English:Zoom
Translated:Zoom
Switch to sorted, active content only for master.txt file
2018-03-21 18:46:25 -07:00
English:Zoom (Ctrl + Left Mouse)
Translated:Zoom (Ctrl + Left Mouse)
Improving ray tracing so we can click tumble widget Fixing warnings
2017-12-04 21:00:39 -08:00
Update master.txt
2018-06-08 14:15:29 -07:00
English:Zoom in
Translated:Zoom in
English:Zoom out
Translated:Zoom out
English:Zoom to window
Translated:Zoom to window
Reference in a new issue Copy permalink