English:No macros are currently setup for this printer.
Translated:No macros are currently setup for this printer.
English:Tuning Adjustment (while printing)
Translated:Tuning Adjustment (while printing)
English:Speed Multiplier
Translated:Speed Multiplier
English:Set
Translated:Set
English:Extrusion Multiplier
Translated:Extrusion Multiplier
English:Controls
Translated:Controls
English:Slice Settings
Translated:Slice Settings
English:Show Help
Translated:Show Help
English:Show All Settings
Translated:Show All Settings
English:Active Settings
Translated:Active Settings
English:unsaved changes
Translated:unsaved changes
English:Revert
Translated:Revert
English:Options
Translated:Options
English:Slice Engine
Translated:Slice Engine
English:No Printer Selected
Translated:No Printer Selected
English:No printer is currently selected. Select printer to edit slice settings.
Translated:No printer is currently selected. Select printer to edit slice settings.
English:Attempts to minimize the number of perimeter crossing. This can help with oozing or strings.
Translated:Attempts to minimize the number of perimeter crossing. This can help with oozing or strings.
English:The shape of the physical print bed.
Translated:The shape of the physical print bed.
English:The size of the print bed.
Translated:The size of the print bed.
English:The temperature to set the bed to after the first layer has been printed. Set to 0 to eliminate bed temperature commands.
Translated:The temperature to set the bed to after the first layer has been printed. Set to 0 to eliminate bed temperature commands.
English:How many layers will be solid filled on the bottom surfaces of the object.
Translated:How many layers will be solid filled on the bottom surfaces of the object.
English:Acceleration to during bridging. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to during bridging. Set to 0 to disable changing the printer's acceleration.
English:The fan speed to use during bridging.
Translated:The fan speed to use during bridging.
English:This controls the ratio of material extruder during bridging. Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
Translated:This controls the ratio of material extruder during bridging. Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
English:The speed to move when bridging between walls.
Translated:The speed to move when bridging between walls.
English:The amount of brim that will be drawn around each object. This is useful to ensure that parts stay affixed to the bed.
Translated:The amount of brim that will be drawn around each object. This is useful to ensure that parts stay affixed to the bed.
English:The height of the printable area. If set to 0 the parts height will not be validated.
Translated:The height of the printable area. If set to 0 the parts height will not be validated.
English:Each individual part is printed to completion then the extruder is lowered back to the bed and the next part is printed.
Translated:Each individual part is printed to completion then the extruder is lowered back to the bed and the next part is printed.
English:Moves the extruder up off the part to allow cooling.
Translated:Moves the extruder up off the part to allow cooling.
English:Turns on and off all cooling settings (all settings below this one).
Translated:Turns on and off all cooling settings (all settings below this one).
English:Acceleration to use on all moves not defined above. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to use on all moves not defined above. Set to 0 to disable changing the printer's acceleration.
English:The number of layers for which the fan will be forced to remain off.
Translated:The number of layers for which the fan will be forced to remain off.
English:This gcode will be inserted at the end of all automatic output (the very end of the gcode commands).
Translated:This gcode will be inserted at the end of all automatic output (the very end of the gcode commands).
English:The speed to print the visible outside edges. This can be set explicitly or as a percentage of the Perimeters speed.
Translated:The speed to print the visible outside edges. This can be set explicitly or as a percentage of the Perimeters speed.
English:Normally external perimeters are printed last, this makes them go first.
Translated:Normally external perimeters are printed last, this makes them go first.
English:Allow slicer to generate extra perimeters when needed for sloping walls.
Translated:Allow slicer to generate extra perimeters when needed for sloping walls.
English:This is used to figure out how far apart individual parts must be printed to allow them to be completed before printing the next part.
Translated:This is used to figure out how far apart individual parts must be printed to allow them to be completed before printing the next part.
English:This is the offset of each extruder relative to the first extruder. Only useful for multiple extruder machines.
Translated:This is the offset of each extruder relative to the first extruder. Only useful for multiple extruder machines.
English:This is the identifier used in the gcode to specify the extruder.
Translated:This is the identifier used in the gcode to specify the extruder.
English:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good min value) will decrease the amount being extruded.
Translated:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good min value) will decrease the amount being extruded.
English:Leave this as 0 to allow automatic calculation of extrusion width.
Translated:Leave this as 0 to allow automatic calculation of extrusion width.
English:This will force the fan to remain on throughout the print. In general you should have this off and just enable auto cooling.
Translated:This will force the fan to remain on throughout the print. In general you should have this off and just enable auto cooling.
English:If a layer is estimated to take less than this to print, the fan will be turned on.
Translated:If a layer is estimated to take less than this to print, the fan will be turned on.
English:This should be set to the actual diameter of the filament you are using on your printer. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
Translated:This should be set to the actual diameter of the filament you are using on your printer. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
English:Sets the starting angle of the infill. Not used when bridging.
Translated:Sets the starting angle of the infill. Not used when bridging.
English:The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
Translated:The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
English:The pattern used on the inside portions of the print.
Translated:The pattern used on the inside portions of the print.
English:Acceleration to use while printing the first layer. Set to 0 to the default first layer acceleration.
Translated:Acceleration to use while printing the first layer. Set to 0 to the default first layer acceleration.
English:The temperature to set the bed to before printing the first layer. The printer will wait until this temperature has been reached before printing. Set to 0 to eliminate bed temperature commands.
Translated:The temperature to set the bed to before printing the first layer. The printer will wait until this temperature has been reached before printing. Set to 0 to eliminate bed temperature commands.
English:Setting this to greater than 100% can often help the first layer have better adhesion to the print bed.
Translated:Setting this to greater than 100% can often help the first layer have better adhesion to the print bed.
English:Sets the height of the first layer. It is often desirable to print a taller first layer to ensure a good solid adhesion to the build plate.
Translated:Sets the height of the first layer. It is often desirable to print a taller first layer to ensure a good solid adhesion to the build plate.
English:The speed to move while printing the first layer. If expressed as a percentage it will modify the corresponding speed set above.
Translated:The speed to move while printing the first layer. If expressed as a percentage it will modify the corresponding speed set above.
English:The temperature to set the extruder to before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
Translated:The temperature to set the extruder to before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
English:Use G0 for moves rather than G1.
Translated:Use G0 for moves rather than G1.
English:Speed to fill small gaps. Keep low to avoid vibration. Set to 0 to skip filling small gaps.
Translated:Speed to fill small gaps. Keep low to avoid vibration. Set to 0 to skip filling small gaps.
English:Use firmware arcs rather than multiple segments for curves.
Translated:Use firmware arcs rather than multiple segments for curves.
English:Include detailed comments in the gcode.
Translated:Include detailed comments in the gcode.
English:Some firmware use different g and m codes. Setting this ensures that the output gcode will use the correct commands.
Translated:Some firmware use different g and m codes. Setting this ensures that the output gcode will use the correct commands.
English:Acceleration to use while infilling. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to use while infilling. Set to 0 to disable changing the printer's acceleration.
English:Sets which layers will receive infill. This should normally stay set to 1 to make strong parts.
Translated:Sets which layers will receive infill. This should normally stay set to 1 to make strong parts.
English:The index of the extruder to use for infill.
Translated:The index of the extruder to use for infill.
English:Sets infill to happen before perimeters are created.
Translated:Sets infill to happen before perimeters are created.
English:Creates infill only where it will be used as internal support.
Translated:Creates infill only where it will be used as internal support.
English:The speed to print infill.
Translated:The speed to print infill.
English:This gcode will be inserted right after the change in z height for the next layer.
Translated:This gcode will be inserted right after the change in z height for the next layer.
English:Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.
Translated:Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.
English:This is the maximum speed that your fan can run at.
Translated:This is the maximum speed that your fan can run at.
English:This is the minimum amount of filament that must be extruded before a rectarction can occure.
Translated:This is the minimum amount of filament that must be extruded before a rectarction can occure.
English:This is the minimum fan speed that your fan can run at.
Translated:This is the minimum fan speed that your fan can run at.
English:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the min layer time.
Translated:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the min layer time.
English:Sets the minimum amount of filament to use drawing the skirt loops. This will cause at least enough skirt loops to be drawn to use this amount of filament.
Translated:Sets the minimum amount of filament to use drawing the skirt loops. This will cause at least enough skirt loops to be drawn to use this amount of filament.
English:These notes will be added as comments in the header of the output gcode.
Translated:These notes will be added as comments in the header of the output gcode.
English:This is the diameter of your extruder nozle.
Translated:This is the diameter of your extruder nozle.
English:Prevents retraction while within a printing perimeter.
Translated:Prevents retraction while within a printing perimeter.
English:This will lower the temperature of the non-printing extruder to help prevent oozing.
Translated:This will lower the temperature of the non-printing extruder to help prevent oozing.
English:Experimental feature that attempts to improve overhangs using the fan and bridge settings.
Translated:Experimental feature that attempts to improve overhangs using the fan and bridge settings.
English:Sets the way that slicer creates file names (this is not used by MatterControl).
Translated:Sets the way that slicer creates file names (this is not used by MatterControl).
English:Acceleration to use on perimeters. Set to 0 to disable changing the printer's acceleration.
Translated:Acceleration to use on perimeters. Set to 0 to disable changing the printer's acceleration.
English:The index of the extruder to use for perimeters.
Translated:The index of the extruder to use for perimeters.
English:Sets the default movement speed while printing perimeters.
Translated:Sets the default movement speed while printing perimeters.
English:The number of external layers or shells to create.
Translated:The number of external layers or shells to create.
English:You can include additional programs to process the gcode after slicer is finished. The complete path of the program to run should be included here.
Translated:You can include additional programs to process the gcode after slicer is finished. The complete path of the program to run should be included here.
English:The position (coordinates) of the center of the print bed.
Translated:The position (coordinates) of the center of the print bed.
English:Number of layers to print before printing any parts.
Translated:Number of layers to print before printing any parts.
English:Start each new layer from a different vertex to reduce seams.
Translated:Start each new layer from a different vertex to reduce seams.
English:The minimum distance of a non-printing move that will result in a retraction.
Translated:The minimum distance of a non-printing move that will result in a retraction.
English:If set, a retraction will occur prior to changing the layer height.
Translated:If set, a retraction will occur prior to changing the layer height.
English:The amount that the filament will be reversed after each qualifying non-printing move.
Translated:The amount that the filament will be reversed after each qualifying non-printing move.
English:The amount that the filament will be reversed before changing to a new tool.
Translated:The amount that the filament will be reversed before changing to a new tool.
English:The amount the extruder head will be lifted after each retraction.
Translated:The amount the extruder head will be lifted after each retraction.
English:The amount the filament will be retracted when changing to a different extruder.
Translated:The amount the filament will be retracted when changing to a different extruder.
English:No updates are currently available.
Translated:No updates are currently available.
English:Additional amount of filament that will be extruded after a retraction.
Translated:Additional amount of filament that will be extruded after a retraction.
English:The amount of extra extrusion that will occur when an extruder is selected.
Translated:The amount of extra extrusion that will occur when an extruder is selected.
English:The speed that the filament will be retracted (and re-extruded).
Translated:The speed that the filament will be retracted (and re-extruded).
English:The minimum feature size to consider from the model. Leave at 0 to use all the model detail.
Translated:The minimum feature size to consider from the model. Leave at 0 to use all the model detail.
English:The distance to start drawing the first skirt loop.
Translated:The distance to start drawing the first skirt loop.
English:The number of layers to draw the skirt.
Translated:The number of layers to draw the skirt.
English:The number of loops to draw around all the parts on the bed.
Translated:The number of loops to draw around all the parts on the bed.
English:If a layer is estimated to take less than this to print, the movement speed will be reduced to try and make the layer take this long to print.
Translated:If a layer is estimated to take less than this to print, the movement speed will be reduced to try and make the layer take this long to print.
English:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
Translated:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
English:The pattern used on the bottom and top layers of the print.
Translated:The pattern used on the bottom and top layers of the print.
English:Forces solid infill for any area less than this amount.
Translated:Forces solid infill for any area less than this amount.
English:Sets how often a layer will be forced to be solid infilled. Zero will result in normal infill throughout.
Translated:Sets how often a layer will be forced to be solid infilled. Zero will result in normal infill throughout.
English:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
Translated:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
English:Force the print to have only one layer and gradually increase the extruder height during the print. Only one part can be printed at a time with this feature.
Translated:Force the print to have only one layer and gradually increase the extruder height during the print. Only one part can be printed at a time with this feature.
English:This is the amount to lower the temperature of an extruder that is not currently printing.
Translated:This is the amount to lower the temperature of an extruder that is not currently printing.
English:This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [first_layer_temperature].
Translated:This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [first_layer_temperature].
English:Make sure the first point on a perimeter is a concave point.
Translated:Make sure the first point on a perimeter is a concave point.
English:Make sure the first point on a perimeter is not an overhang.
Translated:Make sure the first point on a perimeter is not an overhang.
English:The starting angle of the supports.
Translated:The starting angle of the supports.
English:Create support where needed on internal features.
Translated:Create support where needed on internal features.
English:Generate support material everywhere not touching the bed for n layers, regardless of angle.
Translated:Generate support material everywhere not touching the bed for n layers, regardless of angle.
English:The index of the extruder to use for support material.
Translated:The index of the extruder to use for support material.
English:The index of the extruder to use for support material interface layers.
Translated:The index of the extruder to use for support material interface layers.
English:The number of layers to print between the supports and the part.
Translated:The number of layers to print between the supports and the part.
English:The space between lines of the interface layers (0 is solid).
Translated:The space between lines of the interface layers (0 is solid).
English:The pattern used while generating support material.
Translated:The pattern used while generating support material.
English:The space between the lines of he support material.
Translated:The space between the lines of he support material.
English:The speed to print support material structures.
Translated:The speed to print support material structures.
English:The last angle at which support material will be generated. Larger numbers will result in more support. Set to 0 to enable automatic settings.
Translated:The last angle at which support material will be generated. Larger numbers will result in more support. Set to 0 to enable automatic settings.
English:The distance the support material will be from the object in the x and y direction.
Translated:The distance the support material will be from the object in the x and y direction.
English:The distance the support material will be from the object in the z direction.
Translated:The distance the support material will be from the object in the z direction.
English:This turns on and off the generation of support material.
Translated:This turns on and off the generation of support material.
English:The temperature to set the extruder to after the first layer has been printed.
Translated:The temperature to set the extruder to after the first layer has been printed.
English:Detect when walls are too close together and need to be extruded as just one wall.
Translated:Detect when walls are too close together and need to be extruded as just one wall.
English:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
Translated:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
English:This gcode will be inserted after every tool change.
Translated:This gcode will be inserted after every tool change.
English:The speed to print the top infill. This can be set explicitly or as a percentage of the Infill speed.
Translated:The speed to print the top infill. This can be set explicitly or as a percentage of the Infill speed.
English:How many layers will be solid filled on the top surfaces of the object.
Translated:How many layers will be solid filled on the top surfaces of the object.
English:Speed to move when not extruding material.
Translated:Speed to move when not extruding material.
English:Request the firmware to do retractions rather than specify the extruder movements directly.
Translated:Request the firmware to do retractions rather than specify the extruder movements directly.
English:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
Translated:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
English:This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.
Translated:This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.
English:This will cause the extruder to move while retracting to minimize blobs.
Translated:This will cause the extruder to move while retracting to minimize blobs.
English:This value will be added to all of the z positions of the created gcode.
Translated:This value will be added to all of the z positions of the created gcode.
English:Print
Translated:Print
English:Layers/Perimeters
Translated:Layers/Perimeters
English:Layer Height
Translated:Layer Height
English:Perimeters (minimum)
Translated:Perimeters (minimum)
English:Vertical Shells
Translated:Vertical Shells
English:Infill
Translated:Infill
English:Fill Density
Translated:Fill Density
English:Fill Pattern
Translated:Fill Pattern
English:Support Material
Translated:Support Material
English:Generate Support Material
Translated:Generate Support Material
English:Filament
Translated:Filament
English:Diameter
Translated:Diameter
English:Extrude First Layer
Translated:Extrude First Layer
English:Extruder Other Layers
Translated:Extruder Other Layers
English:Bed First Layer
Translated:Bed First Layer
English:Bed Other Layers
Translated:Bed Other Layers
English:Temperature (<28>C)
Translated:Temperature (<28>C)
English:Cooling
Translated:Cooling
English:Enable Auto Cooling
Translated:Enable Auto Cooling
English:Enable
Translated:Enable
English:Printer
Translated:Printer
English:General
Translated:General
English:Bed Size
Translated:Bed Size
English:Print Center
Translated:Print Center
English:Build Height
Translated:Build Height
English:Size and Coordinates
Translated:Size and Coordinates
English:Extruder 1
Translated:Extruder 1
English:Nozzle Diameter
Translated:Nozzle Diameter
English:Size
Translated:Size
English:Configuration
Translated:Configuration
English:EEProm Settings
Translated:EEProm Settings
English:CONFIGURE
Translated:CONFIGURE
English:Automatic Calibration
Translated:Automatic Calibration
English:ENABLE
Translated:ENABLE
English:DISABLE
Translated:DISABLE
English:Enable Automatic Print Leveling
Translated:Enable Automatic Print Leveling
English:Automatic Print Leveling (disabled)
Translated:Automatic Print Leveling (disabled)
English:Extruder Temperature
Translated:Extruder Temperature
English:View Manual Printer Controls and Slicing Settings
Translated:View Manual Printer Controls and Slicing Settings
English:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and my not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and my not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
English:Cannot find\n'{0}'.\nWould you like to remove it from the queue?
Translated:Cannot find\n'{0}'.\nWould you like to remove it from the queue?
English:Item not found
Translated:Item not found
English:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.
Translated:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.
English:'Home' the printer
Translated:'Home' the printer
English:Sample the bed at three points
Translated:Sample the bed at three points
English:Turn auto leveling on
Translated:Turn auto leveling on
English:You should be done in about 3 minutes.
Translated:You should be done in about 3 minutes.
English:Click 'Next' to continue.
Translated:Click 'Next' to continue.
English:The printer should now be 'homing'. Once it is finished homing we will move it to the first point to sample.\n\nTo complete the next few steps you will need
Translated:The printer should now be 'homing'. Once it is finished homing we will move it to the first point to sample.\n\nTo complete the next few steps you will need
English:A standard sheet of paper
Translated:A standard sheet of paper
English:We will use this paper to measure the distance between the extruder and the bed.\n\nClick 'Next' to continue.
Translated:We will use this paper to measure the distance between the extruder and the bed.\n\nClick 'Next' to continue.
English:Congratulations!\n\nAuto Print Leveling is now configured and enabled.
Translated:Congratulations!\n\nAuto Print Leveling is now configured and enabled.
English:Remove the paper
Translated:Remove the paper
English:If in the future you wish to turn Auto Print Leveling off, you can uncheck the 'Enabled' button found in 'Advanced Settings'->'Printer Controls'.\n\nClick 'Done' to close this window.
Translated:If in the future you wish to turn Auto Print Leveling off, you can uncheck the 'Enabled' button found in 'Advanced Settings'->'Printer Controls'.\n\nClick 'Done' to close this window.
English:Step
Translated:Step
English:of
Translated:of
English:Print Leveling Wizard
Translated:Print Leveling Wizard
English:Back
Translated:Back
English:Next
Translated:Next
English:Low Precision
Translated:Low Precision
English:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
Translated:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
English:Place the paper under the extruder
Translated:Place the paper under the extruder
English:Using the above contols
Translated:Using the above contols
English:Press [Z-] until there is resistance to moving the paper
Translated:Press [Z-] until there is resistance to moving the paper
English:Press [Z+] once to release the paper
Translated:Press [Z+] once to release the paper
English:Finally click 'Next' to continue.
Translated:Finally click 'Next' to continue.
English:This part of your bed is too low for the extruder to reach it. You need to raise your bed, or lower your limit, for print leveling to work.
Translated:This part of your bed is too low for the extruder to reach it. You need to raise your bed, or lower your limit, for print leveling to work.
English:Waring Moving Too Low
Translated:Waring Moving Too Low
English:Medium Precision
Translated:Medium Precision
English:We will now refine our measurement of the extruder height at this position.
Translated:We will now refine our measurement of the extruder height at this position.
English:High Precision
Translated:High Precision
English:We will now finalize our measurement of the extruder height at this position.
Translated:We will now finalize our measurement of the extruder height at this position.
English:Press [Z-] one click PAST the first hint of resistance
Translated:Press [Z-] one click PAST the first hint of resistance
English:No printer selected. Press 'Connect' to choose a printer
Translated:No printer selected. Press 'Connect' to choose a printer
English:About
Translated:About
English:This controls the ratio of material extruder during bridging.Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
Translated:This controls the ratio of material extruder during bridging.Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
English:You cannot move any lower. This position on your bed is too low for the extruder to reach. You need to raise your bed, or adjust your limits to allow the extruder to go lower.
Translated:You cannot move any lower. This position on your bed is too low for the extruder to reach. You need to raise your bed, or adjust your limits to allow the extruder to go lower.
English:The 'Serial Port' identifies which connected device is\nyour printer. Changing which usb plug you use may\nchange the associated serial port.\n\nTip: If you are uncertain, plug-in in your printer and hit\nrefresh. The new port that appears should be your\nprinter.
Translated:The 'Serial Port' identifies which connected device is\nyour printer. Changing which usb plug you use may\nchange the associated serial port.\n\nTip: If you are uncertain, plug-in in your printer and hit\nrefresh. The new port that appears should be your\nprinter.
English:The extra distance the raft will extend around the part.
Translated:The extra distance the raft will extend around the part.
English:The percent of the 'Nozzle Diameter' that is the gap between the raft and the first layer. A smaller percent will make the part stick more. A larger percent will make it stick less.
Translated:The percent of the 'Nozzle Diameter' that is the gap between the raft and the first layer. A smaller percent will make the part stick more. A larger percent will make it stick less.
English:Try to connect mesh edges when the actual mesh data is not all the way connected.
Translated:Try to connect mesh edges when the actual mesh data is not all the way connected.
English:Sometime a mesh will not have closed a perimeters. When this is checked these non-closed perimeters while be closed.
Translated:Sometime a mesh will not have closed a perimeters. When this is checked these non-closed perimeters while be closed.
English:Reverse the orientation of overlaps. This can make some unintended holes go away.
Translated:Reverse the orientation of overlaps. This can make some unintended holes go away.
English:Make all overlap areas into one big area. This can make some unintended holes go away..
Translated:Make all overlap areas into one big area. This can make some unintended holes go away..
English:Repair
Translated:Repair
English:Connect Bad Edges
Translated:Connect Bad Edges
English:Close Polygons
Translated:Close Polygons
English:Reverse Orientation
Translated:Reverse Orientation
English:Merge All
Translated:Merge All
English:Overlaps
Translated:Overlaps
English:The distance between the first layer and the top of the raft. A good value is typically about 1/2 your extrusion diameter. So, between 0.0 and .2 for a .4 nozzle.
Translated:The distance between the first layer and the top of the raft. A good value is typically about 1/2 your extrusion diameter. So, between 0.0 and .2 for a .4 nozzle.
English:If in the future you need to re-calibrate your printer, or you wish to turn Auto Print Leveling off, you can find the print leveling controls in 'Advanced Settings'->'Configuration'.\n\nClick 'Done' to close this window.
Translated:If in the future you need to re-calibrate your printer, or you wish to turn Auto Print Leveling off, you can find the print leveling controls in 'Advanced Settings'->'Configuration'.\n\nClick 'Done' to close this window.
English:Print Leveling Overview
Translated:Print Leveling Overview
English:Note: Be sure the tip of the extrude is clean.
Translated:Note: Be sure the tip of the extrude is clean.
English:Oops! You cannot exit while a print is active.
Translated:Oops! You cannot exit while a print is active.
English:Unable to Exit
Translated:Unable to Exit
English:You are currently saving a parts sheet, are you sure you want to exit?
Translated:You are currently saving a parts sheet, are you sure you want to exit?
English:Confirm Exit
Translated:Confirm Exit
English:Disconnect and cancel the current print?
Translated:Disconnect and cancel the current print?
English:WARNING: Disconnecting will cancel the current print.\n\nDo you want to disconnect?
Translated:WARNING: Disconnecting will cancel the current print.\n\nDo you want to disconnect?
English:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
Translated:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
English:Waiting For Extruder To Heat
Translated:Waiting For Extruder To Heat
English:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Translated:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
English:Waiting For Bed To Heat
Translated:Waiting For Bed To Heat
English:Cancel the current print?
Translated:Cancel the current print?
English:Cancel Print?
Translated:Cancel Print?
English:There is a recommended update avalible for MatterControl. Would you like to download it now?
Translated:There is a recommended update avalible for MatterControl. Would you like to download it now?
English:Recommended Update Available
Translated:Recommended Update Available
English:Download Now
Translated:Download Now
English:Remind Me Later
Translated:Remind Me Later
English:Oops! There is no eeprom mapping for your printer's firmware.
Translated:Oops! There is no eeprom mapping for your printer's firmware.
English:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
Translated:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
English:This is the minimum amount of filament that must be extruded before a retraction can occur.
Translated:This is the minimum amount of filament that must be extruded before a retraction can occur.
English:Support Options
Translated:Support Options
English:If this is checked support will be allowed starting on top of internal surfaces. If it is not checked support will only be created starting at the bed.
Translated:If this is checked support will be allowed starting on top of internal surfaces. If it is not checked support will only be created starting at the bed.
English:Support Everywhere
Translated:Support Everywhere
English:The angle the support infill will be drawn.
Translated:The angle the support infill will be drawn.
English:Lets the bed leveling code know if the printer can support the z axis going below 0. A printer with min z endstops or software end stops may not be able to.
Translated:Lets the bed leveling code know if the printer can support the z axis going below 0. A printer with min z endstops or software end stops may not be able to.
Translated:The number of extruders this machine has.
English:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good minimum value) will decrease the amount being extruded.
Translated:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good minimum value) will decrease the amount being extruded.
English:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the minimum layer time.
Translated:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the minimum layer time.
English:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and may not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do. They are not modified by SliceSettings and may not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
English:The file you are attempting to print is a GCode file.\n\nIt is recommendended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommendended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
English:Cannot find this file\nWould you like to remove it from the queue?
Translated:Cannot find this file\nWould you like to remove it from the queue?
