6564 lines
195 KiB
Text
6564 lines
195 KiB
Text
English:
|
||
Translated:
|
||
|
||
English: • Remove the paper
|
||
Translated: • Remove the paper
|
||
|
||
English: is reporting a Hardware Error
|
||
Translated: is reporting a Hardware Error
|
||
|
||
English:- none -
|
||
Translated:- none -
|
||
|
||
English: Once it is finished homing we will heat the bed.
|
||
Translated: Once it is finished homing we will heat the bed.
|
||
|
||
English:\nBelow you can find a list of each setting that has changed.
|
||
Translated:\nBelow you can find a list of each setting that has changed.
|
||
|
||
English:\nUpdating a default setting will not change any override that you have applied.
|
||
Translated:\nUpdating a default setting will not change any override that you have applied.
|
||
|
||
English:"{0}" already exists.\nDo you want to replace it?
|
||
Translated:"{0}" already exists.\nDo you want to replace it?
|
||
|
||
English:$/kg
|
||
Translated:$/kg
|
||
|
||
English:%
|
||
Translated:%
|
||
|
||
English:(Press 'Skip' to setup connection later)
|
||
Translated:(Press 'Skip' to setup connection later)
|
||
|
||
English:\"{0}\" already exists.\nDo you want to replace it?
|
||
Translated:\"{0}\" already exists.\nDo you want to replace it?
|
||
|
||
English:\nBelow you can find a list of each setting that has changed.
|
||
Translated:\nBelow you can find a list of each setting that has changed.
|
||
|
||
English:\nUpdating a default setting will not change any override that you have applied.
|
||
Translated:\nUpdating a default setting will not change any override that you have applied.
|
||
|
||
English:{0} (Update Available)
|
||
Translated:{0} (Update Available)
|
||
|
||
English:{0} must be greater than 0 and less than your nozzle diameter. You may be missing a '%'.
|
||
Translated:{0} must be greater than 0 and less than your nozzle diameter. You may be missing a '%'.
|
||
|
||
English:{0} must be greater than 0.
|
||
Translated:{0} must be greater than 0.
|
||
|
||
English:{0} must be less than or equal to the {1} * 4.
|
||
Translated:{0} must be less than or equal to the {1} * 4.
|
||
|
||
English:{0} must be less than or equal to the {1}.
|
||
Translated:{0} must be less than or equal to the {1}.
|
||
|
||
English:{0} Overview
|
||
Translated:{0} Overview
|
||
|
||
English:{0} should be greater than 0.
|
||
Translated:{0} should be greater than 0.
|
||
|
||
English:{0} should be greater than 2.
|
||
Translated:{0} should be greater than 2.
|
||
|
||
English:{0} should be greater than or equal to 1/2 the {1}.
|
||
Translated:{0} should be greater than or equal to 1/2 the {1}.
|
||
|
||
English:<< Back
|
||
Translated:<< Back
|
||
|
||
English:°
|
||
Translated:°
|
||
|
||
English:°C
|
||
Translated:°C
|
||
|
||
English:1. Power on your 3D Printer.
|
||
Translated:1. Power on your 3D Printer.
|
||
|
||
English:100 Point Disk
|
||
Translated:100 Point Disk
|
||
|
||
English:10x10 Mesh
|
||
Translated:10x10 Mesh
|
||
|
||
English:13 Point Disk
|
||
Translated:13 Point Disk
|
||
|
||
English:2. Attach your 3D Printer via USB.
|
||
Translated:2. Attach your 3D Printer via USB.
|
||
|
||
English:2D Layer View
|
||
Translated:2D Layer View
|
||
|
||
English:2D Shapes
|
||
Translated:2D Shapes
|
||
|
||
English:3 Point Plane
|
||
Translated:3 Point Plane
|
||
|
||
English:3. Press 'Connect'.
|
||
Translated:3. Press 'Connect'.
|
||
|
||
English:3D
|
||
Translated:3D
|
||
|
||
English:3D Layer View
|
||
Translated:3D Layer View
|
||
|
||
English:3x3 Mesh
|
||
Translated:3x3 Mesh
|
||
|
||
English:5x5 Mesh
|
||
Translated:5x5 Mesh
|
||
|
||
English:7 Point Disk
|
||
Translated:7 Point Disk
|
||
|
||
English:A comma separated list of bed names and temperatures (e.g. "Glass,70,PEI,65,Kapton,55"). When selected the bed temperature will be set to the chosen value.
|
||
Translated:A comma separated list of bed names and temperatures (e.g. "Glass,70,PEI,65,Kapton,55"). When selected the bed temperature will be set to the chosen value.
|
||
|
||
English:A comma separated list of sample points to probe the bed at. You must specify an x and y position for each point. For example: '20,20,100,180,180,20' will sample the bad at 3 points.
|
||
Translated:A comma separated list of sample points to probe the bed at. You must specify an x and y position for each point. For example: '20,20,100,180,180,20' will sample the bad at 3 points.
|
||
|
||
English:A component must be selected
|
||
Translated:A component must be selected
|
||
|
||
English:A device attached to the system is not functioning.
|
||
Translated:A device attached to the system is not functioning.
|
||
|
||
English:A Material Should be Selected
|
||
Translated:A Material Should be Selected
|
||
|
||
English:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
|
||
Translated:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
|
||
|
||
English:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
|
||
Translated:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
|
||
|
||
English:A password reset code will be sent to your email.
|
||
Translated:A password reset code will be sent to your email.
|
||
|
||
English:A path must be selected
|
||
Translated:A path must be selected
|
||
|
||
English:A raft is not needed for the calibration object. It is recommended that you turn it off.
|
||
Translated:A raft is not needed for the calibration object. It is recommended that you turn it off.
|
||
|
||
English:A sheet of paper
|
||
Translated:A sheet of paper
|
||
|
||
English:A single part must be selected
|
||
Translated:A single part must be selected
|
||
|
||
English:A six-digit code - sent to your email account
|
||
Translated:A six-digit code - sent to your email account
|
||
|
||
English:A U.S. or Canadian mobile phone number
|
||
Translated:A U.S. or Canadian mobile phone number
|
||
|
||
English:A valid email address
|
||
Translated:A valid email address
|
||
|
||
English:Abort Calibration
|
||
Translated:Abort Calibration
|
||
|
||
English:Abort Print
|
||
Translated:Abort Print
|
||
|
||
English:About
|
||
Translated:About
|
||
|
||
English:About Braille
|
||
Translated:About Braille
|
||
|
||
English:ABS Temperature Tower
|
||
Translated:ABS Temperature Tower
|
||
|
||
English:Acceleration Printing
|
||
Translated:Acceleration Printing
|
||
|
||
English:Acceleration Travel
|
||
Translated:Acceleration Travel
|
||
|
||
English:Accept
|
||
Translated:Accept
|
||
|
||
English:Accept command
|
||
Translated:Accept command
|
||
|
||
English:Account created
|
||
Translated:Account created
|
||
|
||
English:Action
|
||
Translated:Action
|
||
|
||
English:Action Recommended
|
||
Translated:Action Recommended
|
||
|
||
English:Action Required
|
||
Translated:Action Required
|
||
|
||
English:Add
|
||
Translated:Add
|
||
|
||
English:Add a new Macro
|
||
Translated:Add a new Macro
|
||
|
||
English:Add all the items on the bed to the print queue.
|
||
Translated:Add all the items on the bed to the print queue.
|
||
|
||
English:Add an.stl, .obj, .3mf, .amf, .gcode or.zip file to the Library
|
||
Translated:Add an.stl, .obj, .3mf, .amf, .gcode or.zip file to the Library
|
||
|
||
English:Add an.stl, .obj, .amf, .gcode or.zip file to the Library
|
||
Translated:Add an.stl, .obj, .amf, .gcode or.zip file to the Library
|
||
|
||
English:Add Base
|
||
Translated:Add Base
|
||
|
||
English:Add File to Bed
|
||
Translated:Add File to Bed
|
||
|
||
English:Add Hook
|
||
Translated:Add Hook
|
||
|
||
English:Add Image
|
||
Translated:Add Image
|
||
|
||
English:Add Material
|
||
Translated:Add Material
|
||
|
||
English:Add New Setting
|
||
Translated:Add New Setting
|
||
|
||
English:Add Note
|
||
Translated:Add Note
|
||
|
||
English:Add Note...
|
||
Translated:Add Note...
|
||
|
||
English:Add Slice Settings
|
||
Translated:Add Slice Settings
|
||
|
||
English:Add System File to Bed
|
||
Translated:Add System File to Bed
|
||
|
||
English:Add to Bed
|
||
Translated:Add to Bed
|
||
|
||
English:Add to Queue
|
||
Translated:Add to Queue
|
||
|
||
English:Add to Selection
|
||
Translated:Add to Selection
|
||
|
||
English:Add User Overrides
|
||
Translated:Add User Overrides
|
||
|
||
English:Additional Printing Errors
|
||
Translated:Additional Printing Errors
|
||
|
||
English:Adhesion
|
||
Translated:Adhesion
|
||
|
||
English:Adjust this to correct differences between expected printing speeds and actual printing speeds.
|
||
Translated:Adjust this to correct differences between expected printing speeds and actual printing speeds.
|
||
|
||
English:Advanced
|
||
Translated:Advanced
|
||
|
||
English:Advanced Array
|
||
Translated:Advanced Array
|
||
|
||
English:After cleaning the nozzle, run the wizard again.
|
||
Translated:After cleaning the nozzle, run the wizard again.
|
||
|
||
English:After Tool Change G-Code
|
||
Translated:After Tool Change G-Code
|
||
|
||
English:After Tool Change G-Code 2
|
||
Translated:After Tool Change G-Code 2
|
||
|
||
English:After Tool Change G-Code 3
|
||
Translated:After Tool Change G-Code 3
|
||
|
||
English:After Tool Change G-Code 4
|
||
Translated:After Tool Change G-Code 4
|
||
|
||
English:Air Gap
|
||
Translated:Air Gap
|
||
|
||
English:Air Gapped Layer
|
||
Translated:Air Gapped Layer
|
||
|
||
English:Alert
|
||
Translated:Alert
|
||
|
||
English:Align
|
||
Translated:Align
|
||
|
||
English:Aligning Z Axis
|
||
Translated:Aligning Z Axis
|
||
|
||
English:Alignment
|
||
Translated:Alignment
|
||
|
||
English:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
|
||
Translated:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
|
||
|
||
English:All G-Code lines mush be shorter than 100 characters (excluding comments).
|
||
Translated:All G-Code lines mush be shorter than 100 characters (excluding comments).
|
||
|
||
English:All Heaters
|
||
Translated:All Heaters
|
||
|
||
English:Allow M300 commands (play sound) to be sent to the firmware. Disable to turn off sounds.
|
||
Translated:Allow M300 commands (play sound) to be sent to the firmware. Disable to turn off sounds.
|
||
|
||
English:Allow MatterControl to split long lines to improve leveling and print canceling. Critical for printers that are significantly out of level.
|
||
Translated:Allow MatterControl to split long lines to improve leveling and print canceling. Critical for printers that are significantly out of level.
|
||
|
||
English:Alpha
|
||
Translated:Alpha
|
||
|
||
English:Alpha: The in development version of MatterControl
|
||
Translated:Alpha: The in development version of MatterControl
|
||
|
||
English:Already Calibrated
|
||
Translated:Already Calibrated
|
||
|
||
English:Already Loaded
|
||
Translated:Already Loaded
|
||
|
||
English:Alternate Centering
|
||
Translated:Alternate Centering
|
||
|
||
English:Always Centered In Back
|
||
Translated:Always Centered In Back
|
||
|
||
English:AMF File
|
||
Translated:AMF File
|
||
|
||
English:An image must be selected
|
||
Translated:An image must be selected
|
||
|
||
English:An unexpected error occurred during reload
|
||
Translated:An unexpected error occurred during reload
|
||
|
||
English:Anchor
|
||
Translated:Anchor
|
||
|
||
English:and ensure that no filament is stuck to your nozzle.
|
||
Translated:and ensure that no filament is stuck to your nozzle.
|
||
|
||
English:and the hotend to heat to
|
||
Translated:and the hotend to heat to
|
||
|
||
English:Angle
|
||
Translated:Angle
|
||
|
||
English:Anyone with this code will have access
|
||
Translated:Anyone with this code will have access
|
||
|
||
English:Application Cache
|
||
Translated:Application Cache
|
||
|
||
English:Application Storage
|
||
Translated:Application Storage
|
||
|
||
English:Apply
|
||
Translated:Apply
|
||
|
||
English:Apply changes to this print
|
||
Translated:Apply changes to this print
|
||
|
||
English:Apply leveling to G-Code during export
|
||
Translated:Apply leveling to G-Code during export
|
||
|
||
English:Are you sure you want to abort calibration?
|
||
Translated:Are you sure you want to abort calibration?
|
||
|
||
English:Are you sure you want to abort the current print and close MatterControl?
|
||
Translated:Are you sure you want to abort the current print and close MatterControl?
|
||
|
||
English:Are you sure you want to abort the current print(s) and close MatterControl?
|
||
Translated:Are you sure you want to abort the current print(s) and close MatterControl?
|
||
|
||
English:Are you sure you want to add this part ({0}) to the Queue?\nThe 3D part you are trying to load may be too complicated and cause performance or stability problems.\n\nConsider reducing the geometry before proceeding.
|
||
Translated:Are you sure you want to add this part ({0}) to the Queue?\nThe 3D part you are trying to load may be too complicated and cause performance or stability problems.\n\nConsider reducing the geometry before proceeding.
|
||
|
||
English:Are you sure you want to clear your print history?
|
||
Translated:Are you sure you want to clear your print history?
|
||
|
||
English:Are you sure you want to delete printer '{0}'?
|
||
Translated:Are you sure you want to delete printer '{0}'?
|
||
|
||
English:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
|
||
Translated:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
|
||
|
||
English:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
|
||
Translated:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
|
||
|
||
English:Are you sure you want to remove the currently selected items?
|
||
Translated:Are you sure you want to remove the currently selected items?
|
||
|
||
English:Are you sure you want to sign out? You will not have access to your printer profiles or cloud library.
|
||
Translated:Are you sure you want to sign out? You will not have access to your printer profiles or cloud library.
|
||
|
||
English:Arrange All Parts
|
||
Translated:Arrange All Parts
|
||
|
||
English:As the time to print a layer decreases to this, the fan speed will be increased up to its maximum speed.
|
||
Translated:As the time to print a layer decreases to this, the fan speed will be increased up to its maximum speed.
|
||
|
||
English:Ascending
|
||
Translated:Ascending
|
||
|
||
English:At least 1 part must be selected
|
||
Translated:At least 1 part must be selected
|
||
|
||
English:At least 2 parts must be selected
|
||
Translated:At least 2 parts must be selected
|
||
|
||
English:Attempting to connect
|
||
Translated:Attempting to connect
|
||
|
||
English:Attempting to connect again may address the issue.
|
||
Translated:Attempting to connect again may address the issue.
|
||
|
||
English:Attempting to connect to {0}
|
||
Translated:Attempting to connect to {0}
|
||
|
||
English:ATX Power Control
|
||
Translated:ATX Power Control
|
||
|
||
English:Auto Connect
|
||
Translated:Auto Connect
|
||
|
||
English:Auto Release Motors
|
||
Translated:Auto Release Motors
|
||
|
||
English:Auto Support
|
||
Translated:Auto Support
|
||
|
||
English:Auto Uppercase
|
||
Translated:Auto Uppercase
|
||
|
||
English:Automatic
|
||
Translated:Automatic
|
||
|
||
English:Automatic Heater Shutdown in
|
||
Translated:Automatic Heater Shutdown in
|
||
|
||
English:Autopilot
|
||
Translated:Autopilot
|
||
|
||
English:Autopilot is part of MatterControl Pro.
|
||
Translated:Autopilot is part of MatterControl Pro.
|
||
|
||
English:Autopilot Multi
|
||
Translated:Autopilot Multi
|
||
|
||
English:Avoid contact with your skin.
|
||
Translated:Avoid contact with your skin.
|
||
|
||
English:Avoid Crossing Perimeters
|
||
Translated:Avoid Crossing Perimeters
|
||
|
||
English:Axis
|
||
Translated:Axis
|
||
|
||
English:Axis movement speeds
|
||
Translated:Axis movement speeds
|
||
|
||
English:Axis Position
|
||
Translated:Axis Position
|
||
|
||
English:Baby Step Offset
|
||
Translated:Baby Step Offset
|
||
|
||
English:Back
|
||
Translated:Back
|
||
|
||
English:Back Ratio
|
||
Translated:Back Ratio
|
||
|
||
English:Backing Depth
|
||
Translated:Backing Depth
|
||
|
||
English:Backlash
|
||
Translated:Backlash
|
||
|
||
English:Backup Firmware Before Update
|
||
Translated:Backup Firmware Before Update
|
||
|
||
English:Bad
|
||
Translated:Bad
|
||
|
||
English:Bad Thermistor
|
||
Translated:Bad Thermistor
|
||
|
||
English:Base
|
||
Translated:Base
|
||
|
||
English:Base Exposure Time
|
||
Translated:Base Exposure Time
|
||
|
||
English:Base Height
|
||
Translated:Base Height
|
||
|
||
English:Base Layers
|
||
Translated:Base Layers
|
||
|
||
English:Base Lift Distance
|
||
Translated:Base Lift Distance
|
||
|
||
English:Base Lift Speed
|
||
Translated:Base Lift Speed
|
||
|
||
English:Base Min Off Time
|
||
Translated:Base Min Off Time
|
||
|
||
English:Baud Rate
|
||
Translated:Baud Rate
|
||
|
||
English:Be sure you are not pressing down on the bed while moving the paper.
|
||
Translated:Be sure you are not pressing down on the bed while moving the paper.
|
||
|
||
English:Bed
|
||
Translated:Bed
|
||
|
||
English:Bed Dislodged
|
||
Translated:Bed Dislodged
|
||
|
||
English:Bed Leveling data created at {0}°C versus current {1}°C
|
||
Translated:Bed Leveling data created at {0}°C versus current {1}°C
|
||
|
||
English:Bed Leveling Temperature
|
||
Translated:Bed Leveling Temperature
|
||
|
||
English:Bed PID Settings
|
||
Translated:Bed PID Settings
|
||
|
||
English:Bed Remove Part Temperature
|
||
Translated:Bed Remove Part Temperature
|
||
|
||
English:Bed Settings
|
||
Translated:Bed Settings
|
||
|
||
English:Bed Shape
|
||
Translated:Bed Shape
|
||
|
||
English:Bed Size
|
||
Translated:Bed Size
|
||
|
||
English:Bed Surface
|
||
Translated:Bed Surface
|
||
|
||
English:Bed Surface Needs to be Selected
|
||
Translated:Bed Surface Needs to be Selected
|
||
|
||
English:Bed Surface Should be Selected
|
||
Translated:Bed Surface Should be Selected
|
||
|
||
English:Bed Surface Temperatures
|
||
Translated:Bed Surface Temperatures
|
||
|
||
English:Bed Temperature
|
||
Translated:Bed Temperature
|
||
|
||
English:Bed Temperature Set to 0
|
||
Translated:Bed Temperature Set to 0
|
||
|
||
English:Bed Temperature:
|
||
Translated:Bed Temperature:
|
||
|
||
English:Bed Wipe Temperature
|
||
Translated:Bed Wipe Temperature
|
||
|
||
English:Before exporting evaluate and add automatic support material. NOTE: If there is already support, no additional support will be added.
|
||
Translated:Before exporting evaluate and add automatic support material. NOTE: If there is already support, no additional support will be added.
|
||
|
||
English:Before Tool Change G-Code
|
||
Translated:Before Tool Change G-Code
|
||
|
||
English:Before Tool Change G-Code 2
|
||
Translated:Before Tool Change G-Code 2
|
||
|
||
English:Before Tool Change G-Code 3
|
||
Translated:Before Tool Change G-Code 3
|
||
|
||
English:Before Tool Change G-Code 4
|
||
Translated:Before Tool Change G-Code 4
|
||
|
||
English:Before Z-Calibration can begin you need to:
|
||
Translated:Before Z-Calibration can begin you need to:
|
||
|
||
English:Behavior
|
||
Translated:Behavior
|
||
|
||
English:Bend Direction
|
||
Translated:Bend Direction
|
||
|
||
English:Beta
|
||
Translated:Beta
|
||
|
||
English:Beta: The release candidate version of MatterControl
|
||
Translated:Beta: The release candidate version of MatterControl
|
||
|
||
English:Bevel Inset
|
||
Translated:Bevel Inset
|
||
|
||
English:Bevel Start
|
||
Translated:Bevel Start
|
||
|
||
English:Bevel Steps
|
||
Translated:Bevel Steps
|
||
|
||
English:Bevel Top
|
||
Translated:Bevel Top
|
||
|
||
English:Blue Tape
|
||
Translated:Blue Tape
|
||
|
||
English:Blue Tape Bed Temperature
|
||
Translated:Blue Tape Bed Temperature
|
||
|
||
English:Bottom Inset
|
||
Translated:Bottom Inset
|
||
|
||
English:Bottom Solid Infill
|
||
Translated:Bottom Solid Infill
|
||
|
||
English:Bottom Solid Layers
|
||
Translated:Bottom Solid Layers
|
||
|
||
English:Bowden Tube Popped Out
|
||
Translated:Bowden Tube Popped Out
|
||
|
||
English:Box
|
||
Translated:Box
|
||
|
||
English:Braille
|
||
Translated:Braille
|
||
|
||
English:Braille Card
|
||
Translated:Braille Card
|
||
|
||
English:Bridge Over Infill
|
||
Translated:Bridge Over Infill
|
||
|
||
English:Bridges
|
||
Translated:Bridges
|
||
|
||
English:Bridging Fan Speed
|
||
Translated:Bridging Fan Speed
|
||
|
||
English:Brim
|
||
Translated:Brim
|
||
|
||
English:Brim Extruder
|
||
Translated:Brim Extruder
|
||
|
||
English:Build Height
|
||
Translated:Build Height
|
||
|
||
English:BuildTak
|
||
Translated:BuildTak
|
||
|
||
English:BuildTak Bed Temperature
|
||
Translated:BuildTak Bed Temperature
|
||
|
||
English:Calculate and transmit a standard rep-rap checksum for all commands.
|
||
Translated:Calculate and transmit a standard rep-rap checksum for all commands.
|
||
|
||
English:Calculate Path
|
||
Translated:Calculate Path
|
||
|
||
English:Calculation Height
|
||
Translated:Calculation Height
|
||
|
||
English:Calibrate Printer
|
||
Translated:Calibrate Printer
|
||
|
||
English:Calibration
|
||
Translated:Calibration
|
||
|
||
English:Calibration Face
|
||
Translated:Calibration Face
|
||
|
||
English:Calibration Faces
|
||
Translated:Calibration Faces
|
||
|
||
English:Calibration Files
|
||
Translated:Calibration Files
|
||
|
||
English:Calibration Mode
|
||
Translated:Calibration Mode
|
||
|
||
English:Calibration Parts
|
||
Translated:Calibration Parts
|
||
|
||
English:Calibration Print
|
||
Translated:Calibration Print
|
||
|
||
English:Calibration Tab
|
||
Translated:Calibration Tab
|
||
|
||
English:Cancel
|
||
Translated:Cancel
|
||
|
||
English:Cancel command
|
||
Translated:Cancel command
|
||
|
||
English:Cancel G-Code
|
||
Translated:Cancel G-Code
|
||
|
||
English:Cancel Print
|
||
Translated:Cancel Print
|
||
|
||
English:Cancel Print?
|
||
Translated:Cancel Print?
|
||
|
||
English:Cancel the current print?
|
||
Translated:Cancel the current print?
|
||
|
||
English:Can't access
|
||
Translated:Can't access
|
||
|
||
English:Can't log out while printing
|
||
Translated:Can't log out while printing
|
||
|
||
English:Can't sign in while printing
|
||
Translated:Can't sign in while printing
|
||
|
||
English:Categories
|
||
Translated:Categories
|
||
|
||
English:Center Hole Diameter
|
||
Translated:Center Hole Diameter
|
||
|
||
English:Center Parts Before Printing
|
||
Translated:Center Parts Before Printing
|
||
|
||
English:Centered In Back
|
||
Translated:Centered In Back
|
||
|
||
English:Centering
|
||
Translated:Centering
|
||
|
||
English:Change
|
||
Translated:Change
|
||
|
||
English:Change Amount
|
||
Translated:Change Amount
|
||
|
||
English:Change Password
|
||
Translated:Change Password
|
||
|
||
English:Changing Height
|
||
Translated:Changing Height
|
||
|
||
English:Changing your update channel will change the version of MatterControl that you receive when updating
|
||
Translated:Changing your update channel will change the version of MatterControl that you receive when updating
|
||
|
||
English:Check for Update
|
||
Translated:Check for Update
|
||
|
||
English:Check For Update
|
||
Translated:Check For Update
|
||
|
||
English:Check that the nozzle is clean and there is continuity with the pad.
|
||
Translated:Check that the nozzle is clean and there is continuity with the pad.
|
||
|
||
English:Checking Cloud Services
|
||
Translated:Checking Cloud Services
|
||
|
||
English:Checking for updates...
|
||
Translated:Checking for updates...
|
||
|
||
English:Checking with webservice
|
||
Translated:Checking with webservice
|
||
|
||
English:Checks before each print that the layer height is less than the nozzle diameter (important for filament adhesion)
|
||
Translated:Checks before each print that the layer height is less than the nozzle diameter (important for filament adhesion)
|
||
|
||
English:Choose the command for showing the print progress on the printer's LCD screen, if it has one.
|
||
Translated:Choose the command for showing the print progress on the printer's LCD screen, if it has one.
|
||
|
||
English:Circle
|
||
Translated:Circle
|
||
|
||
English:circular
|
||
Translated:circular
|
||
|
||
English:Circular Pitch
|
||
Translated:Circular Pitch
|
||
|
||
English:Clean Filament Page
|
||
Translated:Clean Filament Page
|
||
|
||
English:Clear
|
||
Translated:Clear
|
||
|
||
English:Clear any assigned color. This may allow component colors to be visible.
|
||
Translated:Clear any assigned color. This may allow component colors to be visible.
|
||
|
||
English:Clear Bed
|
||
Translated:Clear Bed
|
||
|
||
English:Clear Bed G-Code
|
||
Translated:Clear Bed G-Code
|
||
|
||
English:Clear Cache
|
||
Translated:Clear Cache
|
||
|
||
English:Clear Height
|
||
Translated:Clear Height
|
||
|
||
English:Clear History
|
||
Translated:Clear History
|
||
|
||
English:Clear History?
|
||
Translated:Clear History?
|
||
|
||
English:Clear Material Setting
|
||
Translated:Clear Material Setting
|
||
|
||
English:Clear Override
|
||
Translated:Clear Override
|
||
|
||
English:Clear Quality Setting
|
||
Translated:Clear Quality Setting
|
||
|
||
English:Clear selection
|
||
Translated:Clear selection
|
||
|
||
English:Clear ZOffset
|
||
Translated:Clear ZOffset
|
||
|
||
English:Clearance
|
||
Translated:Clearance
|
||
|
||
English:Click 'Done'
|
||
Translated:Click 'Done'
|
||
|
||
English:Click 'Next' to continue.
|
||
Translated:Click 'Next' to continue.
|
||
|
||
English:Click the 'Connect' button to retry the original connection attempt
|
||
Translated:Click the 'Connect' button to retry the original connection attempt
|
||
|
||
English:Click to edit values
|
||
Translated:Click to edit values
|
||
|
||
English:Click to go back
|
||
Translated:Click to go back
|
||
|
||
English:Close
|
||
Translated:Close
|
||
|
||
English:Close Polygons
|
||
Translated:Close Polygons
|
||
|
||
English:Cloud Library
|
||
Translated:Cloud Library
|
||
|
||
English:Coarse
|
||
Translated:Coarse
|
||
|
||
English:Coarse calibration complete, we will now do a normal calibration to improve accuracy.
|
||
Translated:Coarse calibration complete, we will now do a normal calibration to improve accuracy.
|
||
|
||
English:Coast At End
|
||
Translated:Coast At End
|
||
|
||
English:Collapse
|
||
Translated:Collapse
|
||
|
||
English:Color
|
||
Translated:Color
|
||
|
||
English:Color 2
|
||
Translated:Color 2
|
||
|
||
English:Color 3
|
||
Translated:Color 3
|
||
|
||
English:Color 4
|
||
Translated:Color 4
|
||
|
||
English:Color View
|
||
Translated:Color View
|
||
|
||
English:Combine
|
||
Translated:Combine
|
||
|
||
English:Community
|
||
Translated:Community
|
||
|
||
English:Compile model
|
||
Translated:Compile model
|
||
|
||
English:Complete Individual Objects
|
||
Translated:Complete Individual Objects
|
||
|
||
English:Completed
|
||
Translated:Completed
|
||
|
||
English:Computer
|
||
Translated:Computer
|
||
|
||
English:Computer / MatterControl
|
||
Translated:Computer / MatterControl
|
||
|
||
English:Computer Crashed
|
||
Translated:Computer Crashed
|
||
|
||
English:Computer Slow / Lagging
|
||
Translated:Computer Slow / Lagging
|
||
|
||
English:CONCENTRIC
|
||
Translated:CONCENTRIC
|
||
|
||
English:Conductive Pad Center
|
||
Translated:Conductive Pad Center
|
||
|
||
English:Conductive Probe Min Z
|
||
Translated:Conductive Probe Min Z
|
||
|
||
English:Conductive Probing
|
||
Translated:Conductive Probing
|
||
|
||
English:Conductive Z Calibration complete.
|
||
Translated:Conductive Z Calibration complete.
|
||
|
||
English:Cone
|
||
Translated:Cone
|
||
|
||
English:Configure
|
||
Translated:Configure
|
||
|
||
English:Configure EEProm
|
||
Translated:Configure EEProm
|
||
|
||
English:Configure Notifications
|
||
Translated:Configure Notifications
|
||
|
||
English:Configure Plugins
|
||
Translated:Configure Plugins
|
||
|
||
English:Configure Wifi
|
||
Translated:Configure Wifi
|
||
|
||
English:Confirm Save As
|
||
Translated:Confirm Save As
|
||
|
||
English:Confirm your new password
|
||
Translated:Confirm your new password
|
||
|
||
English:Confirm your Password
|
||
Translated:Confirm your Password
|
||
|
||
English:Congratulations! Print Leveling is now configured and enabled.
|
||
Translated:Congratulations! Print Leveling is now configured and enabled.
|
||
|
||
English:Connect
|
||
Translated:Connect
|
||
|
||
English:Connect Bad Edges
|
||
Translated:Connect Bad Edges
|
||
|
||
English:Connect to Printer
|
||
Translated:Connect to Printer
|
||
|
||
English:Connect to the currently selected printer
|
||
Translated:Connect to the currently selected printer
|
||
|
||
English:Connect to your printer to continue
|
||
Translated:Connect to your printer to continue
|
||
|
||
English:Connect Your Device
|
||
Translated:Connect Your Device
|
||
|
||
English:Connect your printer to check for firmware updates.
|
||
Translated:Connect your printer to check for firmware updates.
|
||
|
||
English:Connected
|
||
Translated:Connected
|
||
|
||
English:Connected to Emulator
|
||
Translated:Connected to Emulator
|
||
|
||
English:Connecting
|
||
Translated:Connecting
|
||
|
||
English:Connection Failed
|
||
Translated:Connection Failed
|
||
|
||
English:Connection Lost
|
||
Translated:Connection Lost
|
||
|
||
English:Connection succeeded
|
||
Translated:Connection succeeded
|
||
|
||
English:Connection succeeded (port {0}).
|
||
Translated:Connection succeeded (port {0}).
|
||
|
||
English:Connection timed out
|
||
Translated:Connection timed out
|
||
|
||
English:Connection Timeout
|
||
Translated:Connection Timeout
|
||
|
||
English:Connection Troubleshooting
|
||
Translated:Connection Troubleshooting
|
||
|
||
English:Continue
|
||
Translated:Continue
|
||
|
||
English:Continue Printing
|
||
Translated:Continue Printing
|
||
|
||
English:Controls
|
||
Translated:Controls
|
||
|
||
English:Controls the amount of extrusion
|
||
Translated:Controls the amount of extrusion
|
||
|
||
English:Controls the speed of printer moves
|
||
Translated:Controls the speed of printer moves
|
||
|
||
English:Convert to Fuzzy Region
|
||
Translated:Convert to Fuzzy Region
|
||
|
||
English:Convert to Hole
|
||
Translated:Convert to Hole
|
||
|
||
English:Convert to Support
|
||
Translated:Convert to Support
|
||
|
||
English:Convert to Wipe Tower
|
||
Translated:Convert to Wipe Tower
|
||
|
||
English:Cooling
|
||
Translated:Cooling
|
||
|
||
English:copy
|
||
Translated:copy
|
||
|
||
English:Copy
|
||
Translated:Copy
|
||
|
||
English:Copy all settings including hardware calibration
|
||
Translated:Copy all settings including hardware calibration
|
||
|
||
English:Copy and recalibrate
|
||
Translated:Copy and recalibrate
|
||
|
||
English:Copy everything but hardware specific calibration settings
|
||
Translated:Copy everything but hardware specific calibration settings
|
||
|
||
English:Copy extrusions data
|
||
Translated:Copy extrusions data
|
||
|
||
English:Copy in all current user overides
|
||
Translated:Copy in all current user overides
|
||
|
||
English:Copy Mesh
|
||
Translated:Copy Mesh
|
||
|
||
English:Copy Printers
|
||
Translated:Copy Printers
|
||
|
||
English:Copy Printers to Account
|
||
Translated:Copy Printers to Account
|
||
|
||
English:Cost
|
||
Translated:Cost
|
||
|
||
English:Could not find a selected button.
|
||
Translated:Could not find a selected button.
|
||
|
||
English:Couldn't load file
|
||
Translated:Couldn't load file
|
||
|
||
English:Couldn't Resume
|
||
Translated:Couldn't Resume
|
||
|
||
English:Couldn't save file
|
||
Translated:Couldn't save file
|
||
|
||
English:Count
|
||
Translated:Count
|
||
|
||
English:count or mm
|
||
Translated:count or mm
|
||
|
||
English:Create
|
||
Translated:Create
|
||
|
||
English:Create a printer to export G-Code
|
||
Translated:Create a printer to export G-Code
|
||
|
||
English:Create Account
|
||
Translated:Create Account
|
||
|
||
English:Create An Account
|
||
Translated:Create An Account
|
||
|
||
English:Create Brim
|
||
Translated:Create Brim
|
||
|
||
English:Create Folder
|
||
Translated:Create Folder
|
||
|
||
English:Create New Design
|
||
Translated:Create New Design
|
||
|
||
English:Create Part Sheet
|
||
Translated:Create Part Sheet
|
||
|
||
English:Create Perimeter
|
||
Translated:Create Perimeter
|
||
|
||
English:Create Printer
|
||
Translated:Create Printer
|
||
|
||
English:Create Pulse
|
||
Translated:Create Pulse
|
||
|
||
English:Create Raft
|
||
Translated:Create Raft
|
||
|
||
English:Create Skirt
|
||
Translated:Create Skirt
|
||
|
||
English:Create Support
|
||
Translated:Create Support
|
||
|
||
English:Create Supports
|
||
Translated:Create Supports
|
||
|
||
English:Creates a brim attached to the base of the print. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
||
Translated:Creates a brim attached to the base of the print. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
||
|
||
English:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
|
||
Translated:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
|
||
|
||
English:Creates a raft under the printed part. Useful to help parts stick to the build plate.
|
||
Translated:Creates a raft under the printed part. Useful to help parts stick to the build plate.
|
||
|
||
English:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
||
Translated:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
||
|
||
English:Creates an outline around the print, but not attached to it. This is useful for priming the nozzle to ensure the plastic is flowing when the print starts.
|
||
Translated:Creates an outline around the print, but not attached to it. This is useful for priming the nozzle to ensure the plastic is flowing when the print starts.
|
||
|
||
English:Creating firmware backup...
|
||
Translated:Creating firmware backup...
|
||
|
||
English:Creating Gear
|
||
Translated:Creating Gear
|
||
|
||
English:Creating Threads
|
||
Translated:Creating Threads
|
||
|
||
English:Creation Data
|
||
Translated:Creation Data
|
||
|
||
English:Ctrl + A = Select Alll, 'Space' = Clear Selection, 'ESC' = Cancel Drag
|
||
Translated:Ctrl + A = Select Alll, 'Space' = Clear Selection, 'ESC' = Cancel Drag
|
||
|
||
English:Ctrl + P
|
||
Translated:Ctrl + P
|
||
|
||
English:Ctrl + Y | Ctrl + Shift + Z
|
||
Translated:Ctrl + Y | Ctrl + Shift + Z
|
||
|
||
English:Ctrl + Y, Ctrl + Shift + Z
|
||
Translated:Ctrl + Y, Ctrl + Shift + Z
|
||
|
||
English:Ctrl + z
|
||
Translated:Ctrl + z
|
||
|
||
English:Cube
|
||
Translated:Cube
|
||
|
||
English:Current Build
|
||
Translated:Current Build
|
||
|
||
English:Current Default
|
||
Translated:Current Default
|
||
|
||
English:Currently available serial ports.
|
||
Translated:Currently available serial ports.
|
||
|
||
English:Curve
|
||
Translated:Curve
|
||
|
||
English:Custom Points
|
||
Translated:Custom Points
|
||
|
||
English:Custom Profile
|
||
Translated:Custom Profile
|
||
|
||
English:Cut
|
||
Translated:Cut
|
||
|
||
English:Cut Height
|
||
Translated:Cut Height
|
||
|
||
English:Cylinder
|
||
Translated:Cylinder
|
||
|
||
English:Date Created
|
||
Translated:Date Created
|
||
|
||
English:Date Modified
|
||
Translated:Date Modified
|
||
|
||
English:Debug Render Options
|
||
Translated:Debug Render Options
|
||
|
||
English:Decend Speed
|
||
Translated:Decend Speed
|
||
|
||
English:Default
|
||
Translated:Default
|
||
|
||
English:Default Acceleration
|
||
Translated:Default Acceleration
|
||
|
||
English:Define New
|
||
Translated:Define New
|
||
|
||
English:Delete
|
||
Translated:Delete
|
||
|
||
English:Delete Key
|
||
Translated:Delete Key
|
||
|
||
English:Delete Printer
|
||
Translated:Delete Printer
|
||
|
||
English:Delete Printer?
|
||
Translated:Delete Printer?
|
||
|
||
English:Delete selection
|
||
Translated:Delete selection
|
||
|
||
English:Demo Mode
|
||
Translated:Demo Mode
|
||
|
||
English:Density
|
||
Translated:Density
|
||
|
||
English:DEPRECATED: replaced with extruder_offset
|
||
Translated:DEPRECATED: replaced with extruder_offset
|
||
|
||
English:Depth
|
||
Translated:Depth
|
||
|
||
English:Depth Percent
|
||
Translated:Depth Percent
|
||
|
||
English:Descending
|
||
Translated:Descending
|
||
|
||
English:Description
|
||
Translated:Description
|
||
|
||
English:Description - Markdown Text
|
||
Translated:Description - Markdown Text
|
||
|
||
English:Design Apps
|
||
Translated:Design Apps
|
||
|
||
English:Design Name
|
||
Translated:Design Name
|
||
|
||
English:Desktop
|
||
Translated:Desktop
|
||
|
||
English:Details
|
||
Translated:Details
|
||
|
||
English:Detect gaps between perimeters that are too thin to fill with normal infill and attempt to fill them.
|
||
Translated:Detect gaps between perimeters that are too thin to fill with normal infill and attempt to fill them.
|
||
|
||
English:Detect perimeters that cross over themselves and combine them.
|
||
Translated:Detect perimeters that cross over themselves and combine them.
|
||
|
||
English:Detect when walls are too close together and need to be extruded as just one wall.
|
||
Translated:Detect when walls are too close together and need to be extruded as just one wall.
|
||
|
||
English:Detecting device firmware...
|
||
Translated:Detecting device firmware...
|
||
|
||
English:Detects sections of the model that would be too thin to print and expands them to make them printable.
|
||
Translated:Detects sections of the model that would be too thin to print and expands them to make them printable.
|
||
|
||
English:Developed By
|
||
Translated:Developed By
|
||
|
||
English:Diagnostics
|
||
Translated:Diagnostics
|
||
|
||
English:Diameter
|
||
Translated:Diameter
|
||
|
||
English:Diameter Top
|
||
Translated:Diameter Top
|
||
|
||
English:Direction
|
||
Translated:Direction
|
||
|
||
English:Disable Fan For The First
|
||
Translated:Disable Fan For The First
|
||
|
||
English:Disabled: {0}
|
||
Translated:Disabled: {0}
|
||
|
||
English:Discard Changes
|
||
Translated:Discard Changes
|
||
|
||
English:Discard Changes Editing
|
||
Translated:Discard Changes Editing
|
||
|
||
English:Disconnect
|
||
Translated:Disconnect
|
||
|
||
English:Disconnect and stop the current print?
|
||
Translated:Disconnect and stop the current print?
|
||
|
||
English:Disconnect from current printer
|
||
Translated:Disconnect from current printer
|
||
|
||
English:Disconnected
|
||
Translated:Disconnected
|
||
|
||
English:Disconnecting
|
||
Translated:Disconnecting
|
||
|
||
English:Disconnecting from printer...
|
||
Translated:Disconnecting from printer...
|
||
|
||
English:Dislodged From Bed
|
||
Translated:Dislodged From Bed
|
||
|
||
English:Dismiss
|
||
Translated:Dismiss
|
||
|
||
English:Distance
|
||
Translated:Distance
|
||
|
||
English:Distance From Object
|
||
Translated:Distance From Object
|
||
|
||
English:Distance or Loops
|
||
Translated:Distance or Loops
|
||
|
||
English:Documents
|
||
Translated:Documents
|
||
|
||
English:Done
|
||
Translated:Done
|
||
|
||
English:Don't remind me again
|
||
Translated:Don't remind me again
|
||
|
||
English:Down Arrow
|
||
Translated:Down Arrow
|
||
|
||
English:Download Now
|
||
Translated:Download Now
|
||
|
||
English:Download Update
|
||
Translated:Download Update
|
||
|
||
English:Downloading
|
||
Translated:Downloading
|
||
|
||
English:Downloading firmware update...
|
||
Translated:Downloading firmware update...
|
||
|
||
English:Downloading updates...
|
||
Translated:Downloading updates...
|
||
|
||
English:Downloads
|
||
Translated:Downloads
|
||
|
||
English:Dual Contouring
|
||
Translated:Dual Contouring
|
||
|
||
English:Dual Extrusion Align
|
||
Translated:Dual Extrusion Align
|
||
|
||
English:Duplicate
|
||
Translated:Duplicate
|
||
|
||
English:Duplication
|
||
Translated:Duplication
|
||
|
||
English:Each extruder has a separate part cooling fan that is controlled independently.
|
||
Translated:Each extruder has a separate part cooling fan that is controlled independently.
|
||
|
||
English:Each Extruder Has Fan
|
||
Translated:Each Extruder Has Fan
|
||
|
||
English:Each individual part is printed to completion then the nozzle is lowered back to the bed and the next part is printed.
|
||
Translated:Each individual part is printed to completion then the nozzle is lowered back to the bed and the next part is printed.
|
||
|
||
English:Easing Option
|
||
Translated:Easing Option
|
||
|
||
English:Easing Type
|
||
Translated:Easing Type
|
||
|
||
English:edit
|
||
Translated:edit
|
||
|
||
English:Edit
|
||
Translated:Edit
|
||
|
||
English:Edit Component
|
||
Translated:Edit Component
|
||
|
||
English:Edit Leveling Data
|
||
Translated:Edit Leveling Data
|
||
|
||
English:Edit Macro
|
||
Translated:Edit Macro
|
||
|
||
English:Edit Note...
|
||
Translated:Edit Note...
|
||
|
||
English:Edit OpenSCAD script
|
||
Translated:Edit OpenSCAD script
|
||
|
||
English:Edit Page
|
||
Translated:Edit Page
|
||
|
||
English:Edit Radius
|
||
Translated:Edit Radius
|
||
|
||
English:Edit Selected Setting
|
||
Translated:Edit Selected Setting
|
||
|
||
English:Editor Selector
|
||
Translated:Editor Selector
|
||
|
||
English:EEProm Settings
|
||
Translated:EEProm Settings
|
||
|
||
English:Elbow
|
||
Translated:Elbow
|
||
|
||
English:Email
|
||
Translated:Email
|
||
|
||
English:Email Address
|
||
Translated:Email Address
|
||
|
||
English:Empty
|
||
Translated:Empty
|
||
|
||
English:Empty Bed
|
||
Translated:Empty Bed
|
||
|
||
English:Emulate Endstops
|
||
Translated:Emulate Endstops
|
||
|
||
English:Enable Auto Cooling
|
||
Translated:Enable Auto Cooling
|
||
|
||
English:Enable Extruder Lift
|
||
Translated:Enable Extruder Lift
|
||
|
||
English:Enable Fan
|
||
Translated:Enable Fan
|
||
|
||
English:Enable Firmware Sounds
|
||
Translated:Enable Firmware Sounds
|
||
|
||
English:Enable Line Splitting
|
||
Translated:Enable Line Splitting
|
||
|
||
English:Enable Recovery
|
||
Translated:Enable Recovery
|
||
|
||
English:Enable Retractions
|
||
Translated:Enable Retractions
|
||
|
||
English:Enable Socketeer Client
|
||
Translated:Enable Socketeer Client
|
||
|
||
English:Enable Software Leveling
|
||
Translated:Enable Software Leveling
|
||
|
||
English:Enable this if your printer has an automatic Z Probe and you want to validate the leveling before every print. This will run immediately after M190 (print bed reaches temp).
|
||
Translated:Enable this if your printer has an automatic Z Probe and you want to validate the leveling before every print. This will run immediately after M190 (print bed reaches temp).
|
||
|
||
English:Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.
|
||
Translated:Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.
|
||
|
||
English:End
|
||
Translated:End
|
||
|
||
English:End G-Code
|
||
Translated:End G-Code
|
||
|
||
English:End Height Percent
|
||
Translated:End Height Percent
|
||
|
||
English:Ending Angle
|
||
Translated:Ending Angle
|
||
|
||
English:Ensure the nozzle is clear of any debri or filament
|
||
Translated:Ensure the nozzle is clear of any debri or filament
|
||
|
||
English:Enter a Design Name Here
|
||
Translated:Enter a Design Name Here
|
||
|
||
English:Enter a username
|
||
Translated:Enter a username
|
||
|
||
English:Enter New Name Here
|
||
Translated:Enter New Name Here
|
||
|
||
English:Enter Note Here
|
||
Translated:Enter Note Here
|
||
|
||
English:Enter Person Access Token
|
||
Translated:Enter Person Access Token
|
||
|
||
English:Enter reset code
|
||
Translated:Enter reset code
|
||
|
||
English:Enter Share Code
|
||
Translated:Enter Share Code
|
||
|
||
English:Enter your email address
|
||
Translated:Enter your email address
|
||
|
||
English:Enter your new password
|
||
Translated:Enter your new password
|
||
|
||
English:Enter your password
|
||
Translated:Enter your password
|
||
|
||
English:Enter your username or email address
|
||
Translated:Enter your username or email address
|
||
|
||
English:Error
|
||
Translated:Error
|
||
|
||
English:Error compiling OpenSCAD script
|
||
Translated:Error compiling OpenSCAD script
|
||
|
||
English:Error Creating File
|
||
Translated:Error Creating File
|
||
|
||
English:Error creating profile
|
||
Translated:Error creating profile
|
||
|
||
English:Error Loading Contents
|
||
Translated:Error Loading Contents
|
||
|
||
English:Error Loading Image
|
||
Translated:Error Loading Image
|
||
|
||
English:Error Reading File
|
||
Translated:Error Reading File
|
||
|
||
English:Error Reported
|
||
Translated:Error Reported
|
||
|
||
English:Error saving file
|
||
Translated:Error saving file
|
||
|
||
English:Error: Below Conductive Probe Min Z
|
||
Translated:Error: Below Conductive Probe Min Z
|
||
|
||
English:Error: Could not create file for saving. Original error
|
||
Translated:Error: Could not create file for saving. Original error
|
||
|
||
English:Error: Could not read file from disk. Original error:
|
||
Translated:Error: Could not read file from disk. Original error:
|
||
|
||
English:Error: Could not read file from disk. Original error:
|
||
Translated:Error: Could not read file from disk. Original error:
|
||
|
||
English:Estimated Cost
|
||
Translated:Estimated Cost
|
||
|
||
English:Estimated Mass
|
||
Translated:Estimated Mass
|
||
|
||
English:Evaluate every layer for support requirements. NOTE: If there are any support columns, this setting is ignored.
|
||
Translated:Evaluate every layer for support requirements. NOTE: If there are any support columns, this setting is ignored.
|
||
|
||
English:Exact clone
|
||
Translated:Exact clone
|
||
|
||
English:Exit while printing
|
||
Translated:Exit while printing
|
||
|
||
English:Expand
|
||
Translated:Expand
|
||
|
||
English:Expand All
|
||
Translated:Expand All
|
||
|
||
English:Expand Distance
|
||
Translated:Expand Distance
|
||
|
||
English:Expand Thin Walls
|
||
Translated:Expand Thin Walls
|
||
|
||
English:Expand Width
|
||
Translated:Expand Width
|
||
|
||
English:Experimental
|
||
Translated:Experimental
|
||
|
||
English:Export
|
||
Translated:Export
|
||
|
||
English:Export as .csv, .json or .stl
|
||
Translated:Export as .csv, .json or .stl
|
||
|
||
English:Export Bed Leveling Data
|
||
Translated:Export Bed Leveling Data
|
||
|
||
English:Export bed to
|
||
Translated:Export bed to
|
||
|
||
English:Export EEPROM
|
||
Translated:Export EEPROM
|
||
|
||
English:Export EEPROM Settings
|
||
Translated:Export EEPROM Settings
|
||
|
||
English:Export Error
|
||
Translated:Export Error
|
||
|
||
English:Export File
|
||
Translated:Export File
|
||
|
||
English:Export G-Code
|
||
Translated:Export G-Code
|
||
|
||
English:Export History
|
||
Translated:Export History
|
||
|
||
English:Export Part Sheet
|
||
Translated:Export Part Sheet
|
||
|
||
English:Export Photon File
|
||
Translated:Export Photon File
|
||
|
||
English:Export Print Log...
|
||
Translated:Export Print Log...
|
||
|
||
English:Export Printer
|
||
Translated:Export Printer
|
||
|
||
English:Export selection to
|
||
Translated:Export selection to
|
||
|
||
English:Export X3G
|
||
Translated:Export X3G
|
||
|
||
English:Exporting
|
||
Translated:Exporting
|
||
|
||
English:Exporting print history is a MatterControl Pro feature. Upgrade to Pro to unlock MatterControl Pro.
|
||
Translated:Exporting print history is a MatterControl Pro feature. Upgrade to Pro to unlock MatterControl Pro.
|
||
|
||
English:Exposure Time
|
||
Translated:Exposure Time
|
||
|
||
English:External Perimeters First
|
||
Translated:External Perimeters First
|
||
|
||
English:Extra Length After Tool Change
|
||
Translated:Extra Length After Tool Change
|
||
|
||
English:Extra Length On Restart
|
||
Translated:Extra Length On Restart
|
||
|
||
English:Extrude
|
||
Translated:Extrude
|
||
|
||
English:Extrude filament
|
||
Translated:Extrude filament
|
||
|
||
English:Extrude First Layer
|
||
Translated:Extrude First Layer
|
||
|
||
English:Extruder
|
||
Translated:Extruder
|
||
|
||
English:Extruder 2 Clean Page
|
||
Translated:Extruder 2 Clean Page
|
||
|
||
English:Extruder 2 Speed
|
||
Translated:Extruder 2 Speed
|
||
|
||
English:Extruder 2 Temperature
|
||
Translated:Extruder 2 Temperature
|
||
|
||
English:Extruder 3 Temperature
|
||
Translated:Extruder 3 Temperature
|
||
|
||
English:Extruder 4 Temperature
|
||
Translated:Extruder 4 Temperature
|
||
|
||
English:Extruder Change
|
||
Translated:Extruder Change
|
||
|
||
English:Extruder Count
|
||
Translated:Extruder Count
|
||
|
||
English:Extruder Slipping
|
||
Translated:Extruder Slipping
|
||
|
||
English:Extruder Temperature
|
||
Translated:Extruder Temperature
|
||
|
||
English:Extruder Wipe Temperature
|
||
Translated:Extruder Wipe Temperature
|
||
|
||
English:Extruders
|
||
Translated:Extruders
|
||
|
||
English:Extrusion
|
||
Translated:Extrusion
|
||
|
||
English:Extrusion Multiplier
|
||
Translated:Extrusion Multiplier
|
||
|
||
English:Extrusion Ratio
|
||
Translated:Extrusion Ratio
|
||
|
||
English:Face Orientation
|
||
Translated:Face Orientation
|
||
|
||
English:Failed
|
||
Translated:Failed
|
||
|
||
English:Failed to connect server
|
||
Translated:Failed to connect server
|
||
|
||
English:Failure Response A
|
||
Translated:Failure Response A
|
||
|
||
English:Failure Response B
|
||
Translated:Failure Response B
|
||
|
||
English:Fan
|
||
Translated:Fan
|
||
|
||
English:Fan Speed
|
||
Translated:Fan Speed
|
||
|
||
English:Fastest
|
||
Translated:Fastest
|
||
|
||
English:Feature Detector
|
||
Translated:Feature Detector
|
||
|
||
English:Features
|
||
Translated:Features
|
||
|
||
English:Feedrate Ratio
|
||
Translated:Feedrate Ratio
|
||
|
||
English:Filament
|
||
Translated:Filament
|
||
|
||
English:Filament 2 Has Been Loaded
|
||
Translated:Filament 2 Has Been Loaded
|
||
|
||
English:Filament Has Been Loaded
|
||
Translated:Filament Has Been Loaded
|
||
|
||
English:Filament Jam
|
||
Translated:Filament Jam
|
||
|
||
English:Filament Length
|
||
Translated:Filament Length
|
||
|
||
English:Filament Loaded
|
||
Translated:Filament Loaded
|
||
|
||
English:Filament Runout
|
||
Translated:Filament Runout
|
||
|
||
English:Filament Settings
|
||
Translated:Filament Settings
|
||
|
||
English:Filament Snapped
|
||
Translated:Filament Snapped
|
||
|
||
English:Filament Speed
|
||
Translated:Filament Speed
|
||
|
||
English:Filament Unloaded
|
||
Translated:Filament Unloaded
|
||
|
||
English:Filament Volume
|
||
Translated:Filament Volume
|
||
|
||
English:File May Cause Problems
|
||
Translated:File May Cause Problems
|
||
|
||
English:File Path
|
||
Translated:File Path
|
||
|
||
English:Fill Density
|
||
Translated:Fill Density
|
||
|
||
English:Fill Holes
|
||
Translated:Fill Holes
|
||
|
||
English:Fill Thin Gaps
|
||
Translated:Fill Thin Gaps
|
||
|
||
English:Filters
|
||
Translated:Filters
|
||
|
||
English:Final Count
|
||
Translated:Final Count
|
||
|
||
English:Final Faces
|
||
Translated:Final Faces
|
||
|
||
English:Final Vertices
|
||
Translated:Final Vertices
|
||
|
||
English:Finalized
|
||
Translated:Finalized
|
||
|
||
English:Finally click 'Next' to continue.
|
||
Translated:Finally click 'Next' to continue.
|
||
|
||
English:Find and create supports where needed
|
||
Translated:Find and create supports where needed
|
||
|
||
English:Find Slice
|
||
Translated:Find Slice
|
||
|
||
English:Fine
|
||
Translated:Fine
|
||
|
||
English:Finish
|
||
Translated:Finish
|
||
|
||
English:Finished Print
|
||
Translated:Finished Print
|
||
|
||
English:Finished Print: {0}
|
||
Translated:Finished Print: {0}
|
||
|
||
English:Finishing Startup
|
||
Translated:Finishing Startup
|
||
|
||
English:Firmware download failed
|
||
Translated:Firmware download failed
|
||
|
||
English:Firmware EEPROM Settings
|
||
Translated:Firmware EEPROM Settings
|
||
|
||
English:Firmware restored successfully. Please reconnect.
|
||
Translated:Firmware restored successfully. Please reconnect.
|
||
|
||
English:Firmware Type
|
||
Translated:Firmware Type
|
||
|
||
English:Firmware updated successfully. Please reconnect.
|
||
Translated:Firmware updated successfully. Please reconnect.
|
||
|
||
English:Firmware Updates
|
||
Translated:Firmware Updates
|
||
|
||
English:Firmware Version: {0}
|
||
Translated:Firmware Version: {0}
|
||
|
||
English:First Layer
|
||
Translated:First Layer
|
||
|
||
English:First Layer Bad Quality
|
||
Translated:First Layer Bad Quality
|
||
|
||
English:First Layer Bed Temperature
|
||
Translated:First Layer Bed Temperature
|
||
|
||
English:First layer only
|
||
Translated:First layer only
|
||
|
||
English:First Layer Only
|
||
Translated:First Layer Only
|
||
|
||
English:First Layer Thickness
|
||
Translated:First Layer Thickness
|
||
|
||
English:Fit to Bounds
|
||
Translated:Fit to Bounds
|
||
|
||
English:Fit to Cylinder
|
||
Translated:Fit to Cylinder
|
||
|
||
English:Flag for the state of our filament loaded on extruder 2.
|
||
Translated:Flag for the state of our filament loaded on extruder 2.
|
||
|
||
English:Flag for the state of our filament loaded.
|
||
Translated:Flag for the state of our filament loaded.
|
||
|
||
English:Flag keeping track if probe calibration wizard has been run.
|
||
Translated:Flag keeping track if probe calibration wizard has been run.
|
||
|
||
English:Flag keeping track if xy calibration wizard has been run.
|
||
Translated:Flag keeping track if xy calibration wizard has been run.
|
||
|
||
English:Flat
|
||
Translated:Flat
|
||
|
||
English:Flattened
|
||
Translated:Flattened
|
||
|
||
English:Flooded Hot End
|
||
Translated:Flooded Hot End
|
||
|
||
English:Folder Name
|
||
Translated:Folder Name
|
||
|
||
English:Font
|
||
Translated:Font
|
||
|
||
English:Force a retraction when moving between islands (distinct parts on the layer).
|
||
Translated:Force a retraction when moving between islands (distinct parts on the layer).
|
||
|
||
English:Forces external perimeters to be printed first. By default, they will print last.
|
||
Translated:Forces external perimeters to be printed first. By default, they will print last.
|
||
|
||
English:Forces external perimeters to be printed first. By default, they will print last. Using 3 or more perimeters will result in better quality.
|
||
Translated:Forces external perimeters to be printed first. By default, they will print last. Using 3 or more perimeters will result in better quality.
|
||
|
||
English:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
|
||
Translated:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
|
||
|
||
English:Forces the printer to heat the nozzle before homing.
|
||
Translated:Forces the printer to heat the nozzle before homing.
|
||
|
||
English:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
|
||
Translated:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
|
||
|
||
English:Forgot Password
|
||
Translated:Forgot Password
|
||
|
||
English:Forums
|
||
Translated:Forums
|
||
|
||
English:Found a line that is {0} characters long.\n{1}...
|
||
Translated:Found a line that is {0} characters long.\n{1}...
|
||
|
||
English:Found a line that is {0} characters long.\n{1}...
|
||
Translated:Found a line that is {0} characters long.\n{1}...
|
||
|
||
English:Furthest Back
|
||
Translated:Furthest Back
|
||
|
||
English:Fuzzy
|
||
Translated:Fuzzy
|
||
|
||
English:Fuzzy Frequency
|
||
Translated:Fuzzy Frequency
|
||
|
||
English:Fuzzy Thickness
|
||
Translated:Fuzzy Thickness
|
||
|
||
English:G Key
|
||
Translated:G Key
|
||
|
||
English:g/cm³
|
||
Translated:g/cm³
|
||
|
||
English:Garolite
|
||
Translated:Garolite
|
||
|
||
English:Garolite Bed Temperature
|
||
Translated:Garolite Bed Temperature
|
||
|
||
English:G-Code
|
||
Translated:G-Code
|
||
|
||
English:G-Code Line
|
||
Translated:G-Code Line
|
||
|
||
English:G-Code to be run after every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
Translated:G-Code to be run after every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
|
||
English:G-Code to be run after switching to extruder 2. Will use standard after G-Code if not set. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
Translated:G-Code to be run after switching to extruder 2. Will use standard after G-Code if not set. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
|
||
English:G-Code to be run after switching to extruder 3. Will use standard after G-Code if not set. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
Translated:G-Code to be run after switching to extruder 3. Will use standard after G-Code if not set. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
|
||
English:G-Code to be run after the change in Z height for the next layer.
|
||
Translated:G-Code to be run after the change in Z height for the next layer.
|
||
|
||
English:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
|
||
Translated:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
|
||
|
||
English:G-Code to be run before every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
Translated:G-Code to be run before every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
|
||
English:G-Code to be run before switching to extruder 2. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
Translated:G-Code to be run before switching to extruder 2. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
|
||
English:G-Code to be run before switching to extruder 3. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
Translated:G-Code to be run before switching to extruder 3. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
||
|
||
English:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
|
||
Translated:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
|
||
|
||
English:G-Code to be run when the print resumes after a pause.
|
||
Translated:G-Code to be run when the print resumes after a pause.
|
||
|
||
English:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
|
||
Translated:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
|
||
|
||
English:G-Code to run when a print is canceled.
|
||
Translated:G-Code to run when a print is canceled.
|
||
|
||
English:G-Code to run when the printer is paused.
|
||
Translated:G-Code to run when the printer is paused.
|
||
|
||
English:G-Code used by Autopilot to clear the bed after a print completes. This is only useful on a printer designed to clear the bed.
|
||
Translated:G-Code used by Autopilot to clear the bed after a print completes. This is only useful on a printer designed to clear the bed.
|
||
|
||
English:Gear
|
||
Translated:Gear
|
||
|
||
English:General
|
||
Translated:General
|
||
|
||
English:General Quality
|
||
Translated:General Quality
|
||
|
||
English:Generate
|
||
Translated:Generate
|
||
|
||
English:Generate Everywhere
|
||
Translated:Generate Everywhere
|
||
|
||
English:Generate Support
|
||
Translated:Generate Support
|
||
|
||
English:Generate Supports
|
||
Translated:Generate Supports
|
||
|
||
English:Generates an outline around the support material to improve strength and hold up interface layers.
|
||
Translated:Generates an outline around the support material to improve strength and hold up interface layers.
|
||
|
||
English:Generating Lithophane
|
||
Translated:Generating Lithophane
|
||
|
||
English:GitHub Personal Access Token
|
||
Translated:GitHub Personal Access Token
|
||
|
||
English:Give the macro a name
|
||
Translated:Give the macro a name
|
||
|
||
English:Glass
|
||
Translated:Glass
|
||
|
||
English:Glass Bed Temperature
|
||
Translated:Glass Bed Temperature
|
||
|
||
English:Good
|
||
Translated:Good
|
||
|
||
English:Great
|
||
Translated:Great
|
||
|
||
English:GRID
|
||
Translated:GRID
|
||
|
||
English:Group
|
||
Translated:Group
|
||
|
||
English:Group Setings
|
||
Translated:Group Setings
|
||
|
||
English:Guides and Articles
|
||
Translated:Guides and Articles
|
||
|
||
English:GYROID
|
||
Translated:GYROID
|
||
|
||
English:Half Cylinder
|
||
Translated:Half Cylinder
|
||
|
||
English:Half Sphere
|
||
Translated:Half Sphere
|
||
|
||
English:Half Wedge
|
||
Translated:Half Wedge
|
||
|
||
English:Hardware
|
||
Translated:Hardware
|
||
|
||
English:Hardware Error
|
||
Translated:Hardware Error
|
||
|
||
English:Has C Axis
|
||
Translated:Has C Axis
|
||
|
||
English:Has Conductive Nozzle
|
||
Translated:Has Conductive Nozzle
|
||
|
||
English:Has Fan
|
||
Translated:Has Fan
|
||
|
||
English:Has Filament Runout Sensor
|
||
Translated:Has Filament Runout Sensor
|
||
|
||
English:Has Hardware Leveling
|
||
Translated:Has Hardware Leveling
|
||
|
||
English:Has Heated Bed
|
||
Translated:Has Heated Bed
|
||
|
||
English:Has Independent Z Motors
|
||
Translated:Has Independent Z Motors
|
||
|
||
English:Has Power Control
|
||
Translated:Has Power Control
|
||
|
||
English:Has SD Card Reader
|
||
Translated:Has SD Card Reader
|
||
|
||
English:Has Swappable Bed
|
||
Translated:Has Swappable Bed
|
||
|
||
English:Has Z Probe
|
||
Translated:Has Z Probe
|
||
|
||
English:Has Z Servo
|
||
Translated:Has Z Servo
|
||
|
||
English:Have MatterControl send you email messages about your print
|
||
Translated:Have MatterControl send you email messages about your print
|
||
|
||
English:Have MatterControl send you text messages about your print
|
||
Translated:Have MatterControl send you text messages about your print
|
||
|
||
English:Heat Before Homing
|
||
Translated:Heat Before Homing
|
||
|
||
English:Heated Bed
|
||
Translated:Heated Bed
|
||
|
||
English:Heating
|
||
Translated:Heating
|
||
|
||
English:Heating Bed
|
||
Translated:Heating Bed
|
||
|
||
English:Heating Nozzle
|
||
Translated:Heating Nozzle
|
||
|
||
English:Heating the printer
|
||
Translated:Heating the printer
|
||
|
||
English:Height
|
||
Translated:Height
|
||
|
||
English:Height Percent
|
||
Translated:Height Percent
|
||
|
||
English:Help
|
||
Translated:Help
|
||
|
||
English:Here you can find the collection of libraries you can use
|
||
Translated:Here you can find the collection of libraries you can use
|
||
|
||
English:HEXAGON
|
||
Translated:HEXAGON
|
||
|
||
English:Hide
|
||
Translated:Hide
|
||
|
||
English:Hide All
|
||
Translated:Hide All
|
||
|
||
English:High Precision
|
||
Translated:High Precision
|
||
|
||
English:Histogram
|
||
Translated:Histogram
|
||
|
||
English:History
|
||
Translated:History
|
||
|
||
English:Hold 'Shift' to scale proportionally, Type 'Esc' to cancel
|
||
Translated:Hold 'Shift' to scale proportionally, Type 'Esc' to cancel
|
||
|
||
English:Holding Temperature
|
||
Translated:Holding Temperature
|
||
|
||
English:Hole
|
||
Translated:Hole
|
||
|
||
English:Hollow
|
||
Translated:Hollow
|
||
|
||
English:Hollow Out
|
||
Translated:Hollow Out
|
||
|
||
English:Home
|
||
Translated:Home
|
||
|
||
English:Home C
|
||
Translated:Home C
|
||
|
||
English:Home X
|
||
Translated:Home X
|
||
|
||
English:Home X, Y and Z
|
||
Translated:Home X, Y and Z
|
||
|
||
English:Home Y
|
||
Translated:Home Y
|
||
|
||
English:Home Z
|
||
Translated:Home Z
|
||
|
||
English:Home Z Max
|
||
Translated:Home Z Max
|
||
|
||
English:Homing
|
||
Translated:Homing
|
||
|
||
English:Homing Offset
|
||
Translated:Homing Offset
|
||
|
||
English:Homing the printer
|
||
Translated:Homing the printer
|
||
|
||
English:Hotend
|
||
Translated:Hotend
|
||
|
||
English:Hotend {0}
|
||
Translated:Hotend {0}
|
||
|
||
English:Hotend {0} Temperature
|
||
Translated:Hotend {0} Temperature
|
||
|
||
English:Hotend {0} Temperature:
|
||
Translated:Hotend {0} Temperature:
|
||
|
||
English:Hotend Temperature
|
||
Translated:Hotend Temperature
|
||
|
||
English:Hotend Temperature:
|
||
Translated:Hotend Temperature:
|
||
|
||
English:Ideal for cloning settings across different physical printers
|
||
Translated:Ideal for cloning settings across different physical printers
|
||
|
||
English:if connected
|
||
Translated:if connected
|
||
|
||
English:If set, the printer will automatically attempt to connect when selected.
|
||
Translated:If set, the printer will automatically attempt to connect when selected.
|
||
|
||
English:If the extruder has been running for a long time, it may be reporting values that are too large, this will periodically reset it.
|
||
Translated:If the extruder has been running for a long time, it may be reporting values that are too large, this will periodically reset it.
|
||
|
||
English:If the printer has a physically touching z probe (like a BLTouch) this will enable automatic validation of the distance between the nozzle and the z probe.
|
||
Translated:If the printer has a physically touching z probe (like a BLTouch) this will enable automatic validation of the distance between the nozzle and the z probe.
|
||
|
||
English:If the printer has both a conductive nozzle and a z probe this will enable automatic validation of the distance between their readings. Expected output is 'conductive: TRIGGERED' on M119.
|
||
Translated:If the printer has both a conductive nozzle and a z probe this will enable automatic validation of the distance between their readings. Expected output is 'conductive: TRIGGERED' on M119.
|
||
|
||
English:If the time to print a layer is less than this, the fan will turn on at its minimum speed. It will then ramp up to its maximum speed as the layer time decreases.
|
||
Translated:If the time to print a layer is less than this, the fan will turn on at its minimum speed. It will then ramp up to its maximum speed as the layer time decreases.
|
||
|
||
English:Image
|
||
Translated:Image
|
||
|
||
English:Image Converter
|
||
Translated:Image Converter
|
||
|
||
English:Image Missing
|
||
Translated:Image Missing
|
||
|
||
English:Image to Path
|
||
Translated:Image to Path
|
||
|
||
English:Immediately turn off heaters
|
||
Translated:Immediately turn off heaters
|
||
|
||
English:Import
|
||
Translated:Import
|
||
|
||
English:Import EEPROM
|
||
Translated:Import EEPROM
|
||
|
||
English:Import EEPROM Settings
|
||
Translated:Import EEPROM Settings
|
||
|
||
English:Import Presets
|
||
Translated:Import Presets
|
||
|
||
English:Import Printer
|
||
Translated:Import Printer
|
||
|
||
English:Import Successful
|
||
Translated:Import Successful
|
||
|
||
English:Import Wizard
|
||
Translated:Import Wizard
|
||
|
||
English:In / Out Indicators
|
||
Translated:In / Out Indicators
|
||
|
||
English:In addition to the normal firmware errors, these comma separated strings will cause MatterControl to stop and show an error message.
|
||
Translated:In addition to the normal firmware errors, these comma separated strings will cause MatterControl to stop and show an error message.
|
||
|
||
English:Inactive Cool Down
|
||
Translated:Inactive Cool Down
|
||
|
||
English:Include a picture of my print
|
||
Translated:Include a picture of my print
|
||
|
||
English:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
|
||
Translated:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
|
||
|
||
English:Infill
|
||
Translated:Infill
|
||
|
||
English:Infill Amount
|
||
Translated:Infill Amount
|
||
|
||
English:Infill Angle
|
||
Translated:Infill Angle
|
||
|
||
English:Infill Overlap
|
||
Translated:Infill Overlap
|
||
|
||
English:Infill Speeds
|
||
Translated:Infill Speeds
|
||
|
||
English:Infill Type
|
||
Translated:Infill Type
|
||
|
||
English:Inflate
|
||
Translated:Inflate
|
||
|
||
English:Inflate Path
|
||
Translated:Inflate Path
|
||
|
||
English:Initial (Recommended)
|
||
Translated:Initial (Recommended)
|
||
|
||
English:Initial Faces
|
||
Translated:Initial Faces
|
||
|
||
English:Initial Layer Speed
|
||
Translated:Initial Layer Speed
|
||
|
||
English:Initial Layers
|
||
Translated:Initial Layers
|
||
|
||
English:Initial Vertices
|
||
Translated:Initial Vertices
|
||
|
||
English:Initial Z Height Incorrect
|
||
Translated:Initial Z Height Incorrect
|
||
|
||
English:Initializing hardware...
|
||
Translated:Initializing hardware...
|
||
|
||
English:Initializing Library
|
||
Translated:Initializing Library
|
||
|
||
English:Inner Diameter
|
||
Translated:Inner Diameter
|
||
|
||
English:Inner Gear Tooth Count
|
||
Translated:Inner Gear Tooth Count
|
||
|
||
English:Inner Style
|
||
Translated:Inner Style
|
||
|
||
English:Input Resolution
|
||
Translated:Input Resolution
|
||
|
||
English:Insert Filament
|
||
Translated:Insert Filament
|
||
|
||
English:Insert Filament 2 Page
|
||
Translated:Insert Filament 2 Page
|
||
|
||
English:Insert Filament Page
|
||
Translated:Insert Filament Page
|
||
|
||
English:Inside Perimeters
|
||
Translated:Inside Perimeters
|
||
|
||
English:Install Update
|
||
Translated:Install Update
|
||
|
||
English:Instructions
|
||
Translated:Instructions
|
||
|
||
English:Interface Layer
|
||
Translated:Interface Layer
|
||
|
||
English:Interface Layers
|
||
Translated:Interface Layers
|
||
|
||
English:Interface Tour
|
||
Translated:Interface Tour
|
||
|
||
English:Intermediate
|
||
Translated:Intermediate
|
||
|
||
English:Intersect
|
||
Translated:Intersect
|
||
|
||
English:Intersection
|
||
Translated:Intersection
|
||
|
||
English:Invalid Client Token
|
||
Translated:Invalid Client Token
|
||
|
||
English:Invalid printer selection
|
||
Translated:Invalid printer selection
|
||
|
||
English:Inventory
|
||
Translated:Inventory
|
||
|
||
English:Invert
|
||
Translated:Invert
|
||
|
||
English:IP Address
|
||
Translated:IP Address
|
||
|
||
English:IP Address of printer/printer controller
|
||
Translated:IP Address of printer/printer controller
|
||
|
||
English:IP Finder
|
||
Translated:IP Finder
|
||
|
||
English:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
|
||
Translated:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
|
||
|
||
English:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
|
||
Translated:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
|
||
|
||
English:It is currently set to {0}.
|
||
Translated:It is currently set to {0}.
|
||
|
||
English:Item cannot be exported
|
||
Translated:Item cannot be exported
|
||
|
||
English:Item cannot be exported as AMF
|
||
Translated:Item cannot be exported as AMF
|
||
|
||
English:Item cannot be exported as MCX
|
||
Translated:Item cannot be exported as MCX
|
||
|
||
English:Item not Found
|
||
Translated:Item not Found
|
||
|
||
English:Items To Subtract
|
||
Translated:Items To Subtract
|
||
|
||
English:Iterations
|
||
Translated:Iterations
|
||
|
||
English:Jerk Velocity
|
||
Translated:Jerk Velocity
|
||
|
||
English:Junction Deviation [mm/s]
|
||
Translated:Junction Deviation [mm/s]
|
||
|
||
English:Kapton
|
||
Translated:Kapton
|
||
|
||
English:Kapton Bed Temperature
|
||
Translated:Kapton Bed Temperature
|
||
|
||
English:Keys
|
||
Translated:Keys
|
||
|
||
English:Language
|
||
Translated:Language
|
||
|
||
English:Laser Speed
|
||
Translated:Laser Speed
|
||
|
||
English:Latitude Sides
|
||
Translated:Latitude Sides
|
||
|
||
English:Lay Flat
|
||
Translated:Lay Flat
|
||
|
||
English:Layer
|
||
Translated:Layer
|
||
|
||
English:Layer Change G-Code
|
||
Translated:Layer Change G-Code
|
||
|
||
English:Layer Shift
|
||
Translated:Layer Shift
|
||
|
||
English:Layer Thickness
|
||
Translated:Layer Thickness
|
||
|
||
English:Layer Top
|
||
Translated:Layer Top
|
||
|
||
English:Layer(s) To Pause
|
||
Translated:Layer(s) To Pause
|
||
|
||
English:layers
|
||
Translated:layers
|
||
|
||
English:Layers
|
||
Translated:Layers
|
||
|
||
English:Layers / Surface
|
||
Translated:Layers / Surface
|
||
|
||
English:layers or mm
|
||
Translated:layers or mm
|
||
|
||
English:Leave this as 0 to allow automatic calculation of extrusion width.
|
||
Translated:Leave this as 0 to allow automatic calculation of extrusion width.
|
||
|
||
English:left click
|
||
Translated:left click
|
||
|
||
English:left drag
|
||
Translated:left drag
|
||
|
||
English:Left Inset
|
||
Translated:Left Inset
|
||
|
||
English:Length
|
||
Translated:Length
|
||
|
||
English:Length of extra filament to extrude after a complete tool change (in addition to the re-extrusion of the tool change retraction distance).
|
||
Translated:Length of extra filament to extrude after a complete tool change (in addition to the re-extrusion of the tool change retraction distance).
|
||
|
||
English:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
|
||
Translated:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
|
||
|
||
English:Length on Tool Change
|
||
Translated:Length on Tool Change
|
||
|
||
English:Let's show you around before you get started.
|
||
Translated:Let's show you around before you get started.
|
||
|
||
English:Letter
|
||
Translated:Letter
|
||
|
||
English:Leveling
|
||
Translated:Leveling
|
||
|
||
English:Leveling Data Visualizer
|
||
Translated:Leveling Data Visualizer
|
||
|
||
English:Leveling Data Warning
|
||
Translated:Leveling Data Warning
|
||
|
||
English:Leveling Insets
|
||
Translated:Leveling Insets
|
||
|
||
English:Leveling Settings
|
||
Translated:Leveling Settings
|
||
|
||
English:Leveling Solution
|
||
Translated:Leveling Solution
|
||
|
||
English:Library
|
||
Translated:Library
|
||
|
||
English:Library - Enter Share Code
|
||
Translated:Library - Enter Share Code
|
||
|
||
English:Lift Distance
|
||
Translated:Lift Distance
|
||
|
||
English:Lift Speed
|
||
Translated:Lift Speed
|
||
|
||
English:Limited Connectivity
|
||
Translated:Limited Connectivity
|
||
|
||
English:Line {0}
|
||
Translated:Line {0}
|
||
|
||
English:Line Checksums
|
||
Translated:Line Checksums
|
||
|
||
English:Line Inspector
|
||
Translated:Line Inspector
|
||
|
||
English:Line Support Overlap
|
||
Translated:Line Support Overlap
|
||
|
||
English:Linear Array
|
||
Translated:Linear Array
|
||
|
||
English:Linear Extrude
|
||
Translated:Linear Extrude
|
||
|
||
English:LINES
|
||
Translated:LINES
|
||
|
||
English:List of IP's discovered on the network
|
||
Translated:List of IP's discovered on the network
|
||
|
||
English:Lithophane
|
||
Translated:Lithophane
|
||
|
||
English:Load
|
||
Translated:Load
|
||
|
||
English:Load Extruder
|
||
Translated:Load Extruder
|
||
|
||
English:Load Extruder {0}
|
||
Translated:Load Extruder {0}
|
||
|
||
English:Load filament
|
||
Translated:Load filament
|
||
|
||
English:Load Filament
|
||
Translated:Load Filament
|
||
|
||
English:Load Filament Length
|
||
Translated:Load Filament Length
|
||
|
||
English:Load Filament to continue
|
||
Translated:Load Filament to continue
|
||
|
||
English:Load Material
|
||
Translated:Load Material
|
||
|
||
English:Loading
|
||
Translated:Loading
|
||
|
||
English:Loading Filament
|
||
Translated:Loading Filament
|
||
|
||
English:Loading GCode
|
||
Translated:Loading GCode
|
||
|
||
English:Loading G-Code
|
||
Translated:Loading G-Code
|
||
|
||
English:Loading Help
|
||
Translated:Loading Help
|
||
|
||
English:Local Library
|
||
Translated:Local Library
|
||
|
||
English:Location
|
||
Translated:Location
|
||
|
||
English:Location of the '{0}' setting
|
||
Translated:Location of the '{0}' setting
|
||
|
||
English:Lock Proportion
|
||
Translated:Lock Proportion
|
||
|
||
English:Longitude Sides
|
||
Translated:Longitude Sides
|
||
|
||
English:Low Precision
|
||
Translated:Low Precision
|
||
|
||
English:Lower / Deploy
|
||
Translated:Lower / Deploy
|
||
|
||
English:Lower extruder
|
||
Translated:Lower extruder
|
||
|
||
English:M117
|
||
Translated:M117
|
||
|
||
English:M73
|
||
Translated:M73
|
||
|
||
English:Machine File (G-Code)
|
||
Translated:Machine File (G-Code)
|
||
|
||
English:Macro Commands
|
||
Translated:Macro Commands
|
||
|
||
English:Macro Editor
|
||
Translated:Macro Editor
|
||
|
||
English:Macro Name
|
||
Translated:Macro Name
|
||
|
||
English:Macro Presets
|
||
Translated:Macro Presets
|
||
|
||
English:Macros
|
||
Translated:Macros
|
||
|
||
English:Maintain Proportions
|
||
Translated:Maintain Proportions
|
||
|
||
English:Maintain Ratio
|
||
Translated:Maintain Ratio
|
||
|
||
English:Maintain Surface
|
||
Translated:Maintain Surface
|
||
|
||
English:Make
|
||
Translated:Make
|
||
|
||
English:Make Component
|
||
Translated:Make Component
|
||
|
||
English:Make MatterControl emulate bed limits and endstops in software and prevent the printer from moving to invalid locations.
|
||
Translated:Make MatterControl emulate bed limits and endstops in software and prevent the printer from moving to invalid locations.
|
||
|
||
English:Make Selection
|
||
Translated:Make Selection
|
||
|
||
English:Make sure the first point on a perimeter is a concave point.
|
||
Translated:Make sure the first point on a perimeter is a concave point.
|
||
|
||
English:Make sure the first point on a perimeter is not an overhang.
|
||
Translated:Make sure the first point on a perimeter is not an overhang.
|
||
|
||
English:Make the first layer on top of partial infill use the speed and fan for bridging.
|
||
Translated:Make the first layer on top of partial infill use the speed and fan for bridging.
|
||
|
||
English:Manual Movement Speeds
|
||
Translated:Manual Movement Speeds
|
||
|
||
English:Manual Z Calibration complete.
|
||
Translated:Manual Z Calibration complete.
|
||
|
||
English:Manually Configure Connection
|
||
Translated:Manually Configure Connection
|
||
|
||
English:MarchingSquares
|
||
Translated:MarchingSquares
|
||
|
||
English:Markdown Edit
|
||
Translated:Markdown Edit
|
||
|
||
English:Markdown Help
|
||
Translated:Markdown Help
|
||
|
||
English:Marlin
|
||
Translated:Marlin
|
||
|
||
English:Marlin Firmware EEPROM Settings
|
||
Translated:Marlin Firmware EEPROM Settings
|
||
|
||
English:Material
|
||
Translated:Material
|
||
|
||
English:Material density. Only used for estimating mass in the Layer View.
|
||
Translated:Material density. Only used for estimating mass in the Layer View.
|
||
|
||
English:Material Setting
|
||
Translated:Material Setting
|
||
|
||
English:Material Settings
|
||
Translated:Material Settings
|
||
|
||
English:Material Setup
|
||
Translated:Material Setup
|
||
|
||
English:Materials
|
||
Translated:Materials
|
||
|
||
English:MatterControl
|
||
Translated:MatterControl
|
||
|
||
English:MatterControl cannot connect to your printer because another program on your computer is already connected. Close or disconnect any other 3D printing programs or other programs which access serial ports and try again.
|
||
Translated:MatterControl cannot connect to your printer because another program on your computer is already connected. Close or disconnect any other 3D printing programs or other programs which access serial ports and try again.
|
||
|
||
English:MatterControl Help
|
||
Translated:MatterControl Help
|
||
|
||
English:MatterControl is made possible by the team at MatterHackers and other open source software
|
||
Translated:MatterControl is made possible by the team at MatterHackers and other open source software
|
||
|
||
English:MatterControl Plugins
|
||
Translated:MatterControl Plugins
|
||
|
||
English:MatterControl Pro Only
|
||
Translated:MatterControl Pro Only
|
||
|
||
English:MatterControl was unable to connect to the Internet. Please check your Wifi connection and try again
|
||
Translated:MatterControl was unable to connect to the Internet. Please check your Wifi connection and try again
|
||
|
||
English:MatterControl will now attempt to auto-detect your printer.
|
||
Translated:MatterControl will now attempt to auto-detect your printer.
|
||
|
||
English:MatterControl: Select Firmware File
|
||
Translated:MatterControl: Select Firmware File
|
||
|
||
English:Max Acceleration
|
||
Translated:Max Acceleration
|
||
|
||
English:Max Ratio
|
||
Translated:Max Ratio
|
||
|
||
English:Max Temperature
|
||
Translated:Max Temperature
|
||
|
||
English:Max Velocity
|
||
Translated:Max Velocity
|
||
|
||
English:Maximum Acceleration [mm/s²]
|
||
Translated:Maximum Acceleration [mm/s²]
|
||
|
||
English:Maximum E jerk [mm/s]
|
||
Translated:Maximum E jerk [mm/s]
|
||
|
||
English:Maximum feedrates [mm/s]
|
||
Translated:Maximum feedrates [mm/s]
|
||
|
||
English:Maximum Print Speed
|
||
Translated:Maximum Print Speed
|
||
|
||
English:Maximum Speed
|
||
Translated:Maximum Speed
|
||
|
||
English:Maximum X-Y jerk [mm/s]
|
||
Translated:Maximum X-Y jerk [mm/s]
|
||
|
||
English:Maximum Z jerk [mm/s]
|
||
Translated:Maximum Z jerk [mm/s]
|
||
|
||
English:MCX File
|
||
Translated:MCX File
|
||
|
||
English:Measure Probe Offset Conductively
|
||
Translated:Measure Probe Offset Conductively
|
||
|
||
English:Measure the nozzle offset
|
||
Translated:Measure the nozzle offset
|
||
|
||
English:Measure the nozzle to probe offset using the conductive pad.
|
||
Translated:Measure the nozzle to probe offset using the conductive pad.
|
||
|
||
English:Measure Tool
|
||
Translated:Measure Tool
|
||
|
||
English:Measuring the nozzle to probe offset using the conductive pad.
|
||
Translated:Measuring the nozzle to probe offset using the conductive pad.
|
||
|
||
English:Mechanical
|
||
Translated:Mechanical
|
||
|
||
English:Medium Precision
|
||
Translated:Medium Precision
|
||
|
||
English:Merge
|
||
Translated:Merge
|
||
|
||
English:Merge Overlapping Lines
|
||
Translated:Merge Overlapping Lines
|
||
|
||
English:Merge Vertices
|
||
Translated:Merge Vertices
|
||
|
||
English:Mesh
|
||
Translated:Mesh
|
||
|
||
English:Mesh Analysis
|
||
Translated:Mesh Analysis
|
||
|
||
English:middle drag
|
||
Translated:middle drag
|
||
|
||
English:Min feedrate [mm/s]
|
||
Translated:Min feedrate [mm/s]
|
||
|
||
English:Min Sides Per Rotation
|
||
Translated:Min Sides Per Rotation
|
||
|
||
English:Min Surface Area
|
||
Translated:Min Surface Area
|
||
|
||
English:Min travel feedrate [mm/s]
|
||
Translated:Min travel feedrate [mm/s]
|
||
|
||
English:Minimum Avoid Travel Requiring Retraction
|
||
Translated:Minimum Avoid Travel Requiring Retraction
|
||
|
||
English:Minimum Extrusion Length
|
||
Translated:Minimum Extrusion Length
|
||
|
||
English:Minimum Extrusion Requiring Retraction
|
||
Translated:Minimum Extrusion Requiring Retraction
|
||
|
||
English:Minimum Print Speed
|
||
Translated:Minimum Print Speed
|
||
|
||
English:Minimum segment time [ms]
|
||
Translated:Minimum segment time [ms]
|
||
|
||
English:Minimum Speed
|
||
Translated:Minimum Speed
|
||
|
||
English:Minimum Speed Always
|
||
Translated:Minimum Speed Always
|
||
|
||
English:Minimum Travel Requiring Retraction
|
||
Translated:Minimum Travel Requiring Retraction
|
||
|
||
English:Mirror
|
||
Translated:Mirror
|
||
|
||
English:Mirror Mode
|
||
Translated:Mirror Mode
|
||
|
||
English:Mirror On
|
||
Translated:Mirror On
|
||
|
||
English:Mirror X
|
||
Translated:Mirror X
|
||
|
||
English:Mirror Y
|
||
Translated:Mirror Y
|
||
|
||
English:Missing
|
||
Translated:Missing
|
||
|
||
English:mm
|
||
Translated:mm
|
||
|
||
English:mm or %
|
||
Translated:mm or %
|
||
|
||
English:mm zero to disable
|
||
Translated:mm zero to disable
|
||
|
||
English:mm/min
|
||
Translated:mm/min
|
||
|
||
English:mm/s
|
||
Translated:mm/s
|
||
|
||
English:mm/s or %
|
||
Translated:mm/s or %
|
||
|
||
English:mm/s^2
|
||
Translated:mm/s^2
|
||
|
||
English:mm/s²
|
||
Translated:mm/s²
|
||
|
||
English:Mode
|
||
Translated:Mode
|
||
|
||
English:Model
|
||
Translated:Model
|
||
|
||
English:Model View
|
||
Translated:Model View
|
||
|
||
English:Modify
|
||
Translated:Modify
|
||
|
||
English:Modify T1 speeds during extrusion moves by the ratio or percent.
|
||
Translated:Modify T1 speeds during extrusion moves by the ratio or percent.
|
||
|
||
English:Monotonic Solid Infill
|
||
Translated:Monotonic Solid Infill
|
||
|
||
English:More
|
||
Translated:More
|
||
|
||
English:More Export Options
|
||
Translated:More Export Options
|
||
|
||
English:Mouse
|
||
Translated:Mouse
|
||
|
||
English:Move
|
||
Translated:Move
|
||
|
||
English:Move Direction
|
||
Translated:Move Direction
|
||
|
||
English:Move Item
|
||
Translated:Move Item
|
||
|
||
English:Move Part
|
||
Translated:Move Part
|
||
|
||
English:Move Part Constrained
|
||
Translated:Move Part Constrained
|
||
|
||
English:Move View
|
||
Translated:Move View
|
||
|
||
English:Move X negative
|
||
Translated:Move X negative
|
||
|
||
English:Move X positive
|
||
Translated:Move X positive
|
||
|
||
English:Move Y negative
|
||
Translated:Move Y negative
|
||
|
||
English:Move Y positive
|
||
Translated:Move Y positive
|
||
|
||
English:Move Z negative
|
||
Translated:Move Z negative
|
||
|
||
English:Move Z positive
|
||
Translated:Move Z positive
|
||
|
||
English:Move: Middle Mouse Button | Ctrl + Shift + Left Mouse Button
|
||
Translated:Move: Middle Mouse Button | Ctrl + Shift + Left Mouse Button
|
||
|
||
English:Move: Middle Mouse Button | Ctrl + Shift + Left Mouse Button | Shift Arrow Keys
|
||
Translated:Move: Middle Mouse Button | Ctrl + Shift + Left Mouse Button | Shift Arrow Keys
|
||
|
||
English:Move: Middle Mouse Button, Ctrl + Shift + Left Mouse Button, Shift Arrow Keys
|
||
Translated:Move: Middle Mouse Button, Ctrl + Shift + Left Mouse Button, Shift Arrow Keys
|
||
|
||
English:Movement
|
||
Translated:Movement
|
||
|
||
English:Movement Requests
|
||
Translated:Movement Requests
|
||
|
||
English:Movement Speed
|
||
Translated:Movement Speed
|
||
|
||
English:Movement Speeds
|
||
Translated:Movement Speeds
|
||
|
||
English:Movement Speeds Presets
|
||
Translated:Movement Speeds Presets
|
||
|
||
English:Moves
|
||
Translated:Moves
|
||
|
||
English:Moves the nozzle up and off the part to allow cooling.
|
||
Translated:Moves the nozzle up and off the part to allow cooling.
|
||
|
||
English:Multi Line
|
||
Translated:Multi Line
|
||
|
||
English:Multi-Extruder
|
||
Translated:Multi-Extruder
|
||
|
||
English:My Modified Settings
|
||
Translated:My Modified Settings
|
||
|
||
English:My Modified Settings (Printer)
|
||
Translated:My Modified Settings (Printer)
|
||
|
||
English:MyDocuments
|
||
Translated:MyDocuments
|
||
|
||
English:name
|
||
Translated:name
|
||
|
||
English:Name
|
||
Translated:Name
|
||
|
||
English:Name To Write
|
||
Translated:Name To Write
|
||
|
||
English:Networked Printing
|
||
Translated:Networked Printing
|
||
|
||
English:New Design
|
||
Translated:New Design
|
||
|
||
English:New Material
|
||
Translated:New Material
|
||
|
||
English:New Password
|
||
Translated:New Password
|
||
|
||
English:New Printer Name
|
||
Translated:New Printer Name
|
||
|
||
English:New Quality Setting
|
||
Translated:New Quality Setting
|
||
|
||
English:New updates are ready to install
|
||
Translated:New updates are ready to install
|
||
|
||
English:New updates may be available
|
||
Translated:New updates may be available
|
||
|
||
English:New User?
|
||
Translated:New User?
|
||
|
||
English:Next
|
||
Translated:Next
|
||
|
||
English:No
|
||
Translated:No
|
||
|
||
English:No Color
|
||
Translated:No Color
|
||
|
||
English:No items to Export
|
||
Translated:No items to Export
|
||
|
||
English:No Items to Export
|
||
Translated:No Items to Export
|
||
|
||
English:No macros are currently set up for this printer.
|
||
Translated:No macros are currently set up for this printer.
|
||
|
||
English:No part to arrange
|
||
Translated:No part to arrange
|
||
|
||
English:No printable parts exists within the bounds of the printer bed. Add content to continue
|
||
Translated:No printable parts exists within the bounds of the printer bed. Add content to continue
|
||
|
||
English:No Printer Selected
|
||
Translated:No Printer Selected
|
||
|
||
English:No results found
|
||
Translated:No results found
|
||
|
||
English:No setting currently need to be updated.
|
||
Translated:No setting currently need to be updated.
|
||
|
||
English:None
|
||
Translated:None
|
||
|
||
English:Non-Manifold
|
||
Translated:Non-Manifold
|
||
|
||
English:Normal
|
||
Translated:Normal
|
||
|
||
English:Normal (Recommended)
|
||
Translated:Normal (Recommended)
|
||
|
||
English:Normal Layers
|
||
Translated:Normal Layers
|
||
|
||
English:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
|
||
Translated:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
|
||
|
||
English:Not Connected
|
||
Translated:Not Connected
|
||
|
||
English:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
|
||
Translated:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
|
||
|
||
English:NOTE: Standard messaging rates may apply.
|
||
Translated:NOTE: Standard messaging rates may apply.
|
||
|
||
English:Notifications
|
||
Translated:Notifications
|
||
|
||
English:Nozzle
|
||
Translated:Nozzle
|
||
|
||
English:Nozzle 1 Inset
|
||
Translated:Nozzle 1 Inset
|
||
|
||
English:Nozzle 1 should have offsets set to 0.
|
||
Translated:Nozzle 1 should have offsets set to 0.
|
||
|
||
English:Nozzle 2 Inset
|
||
Translated:Nozzle 2 Inset
|
||
|
||
English:Nozzle Alignment
|
||
Translated:Nozzle Alignment
|
||
|
||
English:Nozzle Alignment measures the distance between hotends.
|
||
Translated:Nozzle Alignment measures the distance between hotends.
|
||
|
||
English:Nozzle Diameter
|
||
Translated:Nozzle Diameter
|
||
|
||
English:Nozzle Offset Calibration
|
||
Translated:Nozzle Offset Calibration
|
||
|
||
English:Nozzle Offset Calibration Wizard
|
||
Translated:Nozzle Offset Calibration Wizard
|
||
|
||
English:Nozzle Offsets
|
||
Translated:Nozzle Offsets
|
||
|
||
English:Nozzle Width
|
||
Translated:Nozzle Width
|
||
|
||
English:Num Cells
|
||
Translated:Num Cells
|
||
|
||
English:Number
|
||
Translated:Number
|
||
|
||
English:Number of layers to print before printing any parts.
|
||
Translated:Number of layers to print before printing any parts.
|
||
|
||
English:Number of Samples
|
||
Translated:Number of Samples
|
||
|
||
English:Number Printed
|
||
Translated:Number Printed
|
||
|
||
English:of
|
||
Translated:of
|
||
|
||
English:Off
|
||
Translated:Off
|
||
|
||
English:Offset
|
||
Translated:Offset
|
||
|
||
English:Offset Calibration complete.
|
||
Translated:Offset Calibration complete.
|
||
|
||
English:Offset For Next Push
|
||
Translated:Offset For Next Push
|
||
|
||
English:Ok
|
||
Translated:Ok
|
||
|
||
English:OK
|
||
Translated:OK
|
||
|
||
English:'Ok' Responses
|
||
Translated:'Ok' Responses
|
||
|
||
English:On Connect G-Code
|
||
Translated:On Connect G-Code
|
||
|
||
English:One or more items cannot be exported as STL
|
||
Translated:One or more items cannot be exported as STL
|
||
|
||
English:Oops! Baud Rate must be an integer.
|
||
Translated:Oops! Baud Rate must be an integer.
|
||
|
||
English:Oops! Could not complete update.
|
||
Translated:Oops! Could not complete update.
|
||
|
||
English:Oops! Could not find this file
|
||
Translated:Oops! Could not find this file
|
||
|
||
English:Oops! Field cannot be left blank
|
||
Translated:Oops! Field cannot be left blank
|
||
|
||
English:Oops! Field cannot have special characters
|
||
Translated:Oops! Field cannot have special characters
|
||
|
||
English:Oops! Invalid code.
|
||
Translated:Oops! Invalid code.
|
||
|
||
English:Oops! Invalid username, email or password.
|
||
Translated:Oops! Invalid username, email or password.
|
||
|
||
English:Oops! Please select a baud rate.
|
||
Translated:Oops! Please select a baud rate.
|
||
|
||
English:Oops! Please select a device to continue.
|
||
Translated:Oops! Please select a device to continue.
|
||
|
||
English:Oops! Please select a serial port.
|
||
Translated:Oops! Please select a serial port.
|
||
|
||
English:Oops! Please sign in to enable this feature.
|
||
Translated:Oops! Please sign in to enable this feature.
|
||
|
||
English:Oops! Printer could not be detected
|
||
Translated:Oops! Printer could not be detected
|
||
|
||
English:Oops! Settings file '{0}' did not contain any settings we could import.
|
||
Translated:Oops! Settings file '{0}' did not contain any settings we could import.
|
||
|
||
English:Oops! There is no eeprom mapping for your printer's firmware.
|
||
Translated:Oops! There is no eeprom mapping for your printer's firmware.
|
||
|
||
English:Oops! There was a problem creating your account.
|
||
Translated:Oops! There was a problem creating your account.
|
||
|
||
English:Oops! There was a problem processing your request.
|
||
Translated:Oops! There was a problem processing your request.
|
||
|
||
English:Oops! There was a problem resetting your password.
|
||
Translated:Oops! There was a problem resetting your password.
|
||
|
||
English:Oops! Unable to connect to server
|
||
Translated:Oops! Unable to connect to server
|
||
|
||
English:Oops! Unable to initialize device.
|
||
Translated:Oops! Unable to initialize device.
|
||
|
||
English:Oops! Unable to install update.
|
||
Translated:Oops! Unable to install update.
|
||
|
||
English:Oops! Unable to recognize settings file '{0}'.
|
||
Translated:Oops! Unable to recognize settings file '{0}'.
|
||
|
||
English:Oops! You cannot share this item.
|
||
Translated:Oops! You cannot share this item.
|
||
|
||
English:Oops! Your session has expired. Please sign-in again to continue.
|
||
Translated:Oops! Your session has expired. Please sign-in again to continue.
|
||
|
||
English:Open
|
||
Translated:Open
|
||
|
||
English:Open a copy
|
||
Translated:Open a copy
|
||
|
||
English:Open File
|
||
Translated:Open File
|
||
|
||
English:Open Folder
|
||
Translated:Open Folder
|
||
|
||
English:Open Package
|
||
Translated:Open Package
|
||
|
||
English:Open Recent
|
||
Translated:Open Recent
|
||
|
||
English:Open Settings View Options
|
||
Translated:Open Settings View Options
|
||
|
||
English:OpenSCAD not installed
|
||
Translated:OpenSCAD not installed
|
||
|
||
English:Operation
|
||
Translated:Operation
|
||
|
||
English:Optional
|
||
Translated:Optional
|
||
|
||
English:Options
|
||
Translated:Options
|
||
|
||
English:or
|
||
Translated:or
|
||
|
||
English:Other
|
||
Translated:Other
|
||
|
||
English:Other Speeds
|
||
Translated:Other Speeds
|
||
|
||
English:Outer Diameter
|
||
Translated:Outer Diameter
|
||
|
||
English:Outer Edge Width
|
||
Translated:Outer Edge Width
|
||
|
||
English:Outer Style
|
||
Translated:Outer Style
|
||
|
||
English:Outline Path
|
||
Translated:Outline Path
|
||
|
||
English:Outline Width
|
||
Translated:Outline Width
|
||
|
||
English:Outlines (default)
|
||
Translated:Outlines (default)
|
||
|
||
English:Output
|
||
Translated:Output
|
||
|
||
English:Output only the first layer of the print. Especially useful for outputting gcode data for applications like engraving or cutting.
|
||
Translated:Output only the first layer of the print. Especially useful for outputting gcode data for applications like engraving or cutting.
|
||
|
||
English:Output Resolution
|
||
Translated:Output Resolution
|
||
|
||
English:Outside Perimeter
|
||
Translated:Outside Perimeter
|
||
|
||
English:Outside Perimeters
|
||
Translated:Outside Perimeters
|
||
|
||
English:Oval
|
||
Translated:Oval
|
||
|
||
English:Overhang
|
||
Translated:Overhang
|
||
|
||
English:Overhang Angle
|
||
Translated:Overhang Angle
|
||
|
||
English:Override Radius
|
||
Translated:Override Radius
|
||
|
||
English:Overview
|
||
Translated:Overview
|
||
|
||
English:Pan
|
||
Translated:Pan
|
||
|
||
English:Pan View
|
||
Translated:Pan View
|
||
|
||
English:Part Cooling Fan
|
||
Translated:Part Cooling Fan
|
||
|
||
English:Part Cooling Fan {i}
|
||
Translated:Part Cooling Fan {i}
|
||
|
||
English:Part Settings
|
||
Translated:Part Settings
|
||
|
||
English:Part(s) to Subtract
|
||
Translated:Part(s) to Subtract
|
||
|
||
English:Part(s) to Subtract and Replace
|
||
Translated:Part(s) to Subtract and Replace
|
||
|
||
English:Parts
|
||
Translated:Parts
|
||
|
||
English:Password
|
||
Translated:Password
|
||
|
||
English:Password Reset Code
|
||
Translated:Password Reset Code
|
||
|
||
English:Password update complete
|
||
Translated:Password update complete
|
||
|
||
English:Paste
|
||
Translated:Paste
|
||
|
||
English:Paste Into
|
||
Translated:Paste Into
|
||
|
||
English:Path
|
||
Translated:Path
|
||
|
||
English:Pattern Spacing
|
||
Translated:Pattern Spacing
|
||
|
||
English:Pause
|
||
Translated:Pause
|
||
|
||
English:Pause automatic heater shutdown
|
||
Translated:Pause automatic heater shutdown
|
||
|
||
English:Pause G-Code
|
||
Translated:Pause G-Code
|
||
|
||
English:Pause Print
|
||
Translated:Pause Print
|
||
|
||
English:Paused
|
||
Translated:Paused
|
||
|
||
English:PEI
|
||
Translated:PEI
|
||
|
||
English:PEI Bed Temperature
|
||
Translated:PEI Bed Temperature
|
||
|
||
English:Percentage of
|
||
Translated:Percentage of
|
||
|
||
English:Perimeter Acceleration
|
||
Translated:Perimeter Acceleration
|
||
|
||
English:Perimeter Speeds
|
||
Translated:Perimeter Speeds
|
||
|
||
English:Perimeters
|
||
Translated:Perimeters
|
||
|
||
English:Perimeters Per Extruder
|
||
Translated:Perimeters Per Extruder
|
||
|
||
English:Permission denied
|
||
Translated:Permission denied
|
||
|
||
English:Permission Denied
|
||
Translated:Permission Denied
|
||
|
||
English:Perspective Mode
|
||
Translated:Perspective Mode
|
||
|
||
English:PETG Temperature Tower
|
||
Translated:PETG Temperature Tower
|
||
|
||
English:Pick the pad that is the most aligned with the base, the pad that is the most balance and centered.
|
||
Translated:Pick the pad that is the most aligned with the base, the pad that is the most balance and centered.
|
||
|
||
English:PID Settings
|
||
Translated:PID Settings
|
||
|
||
English:Pillar Size
|
||
Translated:Pillar Size
|
||
|
||
English:Pin
|
||
Translated:Pin
|
||
|
||
English:Pinch
|
||
Translated:Pinch
|
||
|
||
English:Pipe Works
|
||
Translated:Pipe Works
|
||
|
||
English:Pitch
|
||
Translated:Pitch
|
||
|
||
English:Pitch Radius
|
||
Translated:Pitch Radius
|
||
|
||
English:Pixels Per mm
|
||
Translated:Pixels Per mm
|
||
|
||
English:PLA Temperature Tower
|
||
Translated:PLA Temperature Tower
|
||
|
||
English:Place the bed back on the printer
|
||
Translated:Place the bed back on the printer
|
||
|
||
English:Place the paper under the extruder
|
||
Translated:Place the paper under the extruder
|
||
|
||
English:Placement
|
||
Translated:Placement
|
||
|
||
English:Plane Cut
|
||
Translated:Plane Cut
|
||
|
||
English:Plating and settings changes can be applied
|
||
Translated:Plating and settings changes can be applied
|
||
|
||
English:Plating History
|
||
Translated:Plating History
|
||
|
||
English:Play a Sound
|
||
Translated:Play a Sound
|
||
|
||
English:Play a sound for notifications
|
||
Translated:Play a sound for notifications
|
||
|
||
English:Please Confirm
|
||
Translated:Please Confirm
|
||
|
||
English:Please select a writable folder
|
||
Translated:Please select a writable folder
|
||
|
||
English:Please select the material you want to load into extruder {0}.
|
||
Translated:Please select the material you want to load into extruder {0}.
|
||
|
||
English:Please select the material you want to load.
|
||
Translated:Please select the material you want to load.
|
||
|
||
English:Please select the material you want to unload from extruder {0}.
|
||
Translated:Please select the material you want to unload from extruder {0}.
|
||
|
||
English:Please select the material you want to unload.
|
||
Translated:Please select the material you want to unload.
|
||
|
||
English:Please sign in to continue.
|
||
Translated:Please sign in to continue.
|
||
|
||
English:Please wait until the print has finished and try again.
|
||
Translated:Please wait until the print has finished and try again.
|
||
|
||
English:Please wait while we create your account...
|
||
Translated:Please wait while we create your account...
|
||
|
||
English:Please wait while we update your password...
|
||
Translated:Please wait while we update your password...
|
||
|
||
English:Please wait. Emailing reset code...
|
||
Translated:Please wait. Emailing reset code...
|
||
|
||
English:Please wait. Redeeming code...
|
||
Translated:Please wait. Redeeming code...
|
||
|
||
English:Please wait. Retrieving share code...
|
||
Translated:Please wait. Retrieving share code...
|
||
|
||
English:Please wait. Sending invite...
|
||
Translated:Please wait. Sending invite...
|
||
|
||
English:Please wait. Signing in...
|
||
Translated:Please wait. Signing in...
|
||
|
||
English:Plug in printer USB cable and turn printer on
|
||
Translated:Plug in printer USB cable and turn printer on
|
||
|
||
English:Plugins
|
||
Translated:Plugins
|
||
|
||
English:Point Size
|
||
Translated:Point Size
|
||
|
||
English:Polygons
|
||
Translated:Polygons
|
||
|
||
English:Polypropylene
|
||
Translated:Polypropylene
|
||
|
||
English:Polypropylene Bed Temperature
|
||
Translated:Polypropylene Bed Temperature
|
||
|
||
English:Port
|
||
Translated:Port
|
||
|
||
English:Port In Use
|
||
Translated:Port In Use
|
||
|
||
English:Port not available
|
||
Translated:Port not available
|
||
|
||
English:Port not found
|
||
Translated:Port not found
|
||
|
||
English:Port number to be used with IP Address to connect to printer over the network
|
||
Translated:Port number to be used with IP Address to connect to printer over the network
|
||
|
||
English:Port Wizard
|
||
Translated:Port Wizard
|
||
|
||
English:Position
|
||
Translated:Position
|
||
|
||
English:Possible Unsupported Parts Detected
|
||
Translated:Possible Unsupported Parts Detected
|
||
|
||
English:Power Control
|
||
Translated:Power Control
|
||
|
||
English:Power Outage
|
||
Translated:Power Outage
|
||
|
||
English:Precise probe calibration complete.
|
||
Translated:Precise probe calibration complete.
|
||
|
||
English:Prefered Radius
|
||
Translated:Prefered Radius
|
||
|
||
English:Preheat
|
||
Translated:Preheat
|
||
|
||
English:Preparing help
|
||
Translated:Preparing help
|
||
|
||
English:Preparing help index
|
||
Translated:Preparing help index
|
||
|
||
English:Preparing To Print
|
||
Translated:Preparing To Print
|
||
|
||
English:Press
|
||
Translated:Press
|
||
|
||
English:Press [Z-] until there is resistance to moving the paper
|
||
Translated:Press [Z-] until there is resistance to moving the paper
|
||
|
||
English:Press [Z+] once to release the paper
|
||
Translated:Press [Z+] once to release the paper
|
||
|
||
English:Pressure Angle
|
||
Translated:Pressure Angle
|
||
|
||
English:Prev
|
||
Translated:Prev
|
||
|
||
English:Preview
|
||
Translated:Preview
|
||
|
||
English:Priming Height
|
||
Translated:Priming Height
|
||
|
||
English:Priming Width
|
||
Translated:Priming Width
|
||
|
||
English:Primitive Shapes
|
||
Translated:Primitive Shapes
|
||
|
||
English:Primitives
|
||
Translated:Primitives
|
||
|
||
English:Primitives 2D
|
||
Translated:Primitives 2D
|
||
|
||
English:Print
|
||
Translated:Print
|
||
|
||
English:Print Canceled
|
||
Translated:Print Canceled
|
||
|
||
English:Print Center
|
||
Translated:Print Center
|
||
|
||
English:Print Complete
|
||
Translated:Print Complete
|
||
|
||
English:Print Delay
|
||
Translated:Print Delay
|
||
|
||
English:Print History
|
||
Translated:Print History
|
||
|
||
English:Print History Note
|
||
Translated:Print History Note
|
||
|
||
English:Print Leveling
|
||
Translated:Print Leveling
|
||
|
||
English:Print Leveling is an optional feature for this printer that can help improve print quality. If the bed is uneven or cannot be mechanically leveled.
|
||
Translated:Print Leveling is an optional feature for this printer that can help improve print quality. If the bed is uneven or cannot be mechanically leveled.
|
||
|
||
English:Print Leveling measures the plane of the bed.
|
||
Translated:Print Leveling measures the plane of the bed.
|
||
|
||
English:Print Leveling will run automatically at the start of each print.
|
||
Translated:Print Leveling will run automatically at the start of each print.
|
||
|
||
English:Print Leveling Wizard
|
||
Translated:Print Leveling Wizard
|
||
|
||
English:Print Notification Settings
|
||
Translated:Print Notification Settings
|
||
|
||
English:Print Priming Object
|
||
Translated:Print Priming Object
|
||
|
||
English:Print Quality
|
||
Translated:Print Quality
|
||
|
||
English:Print Queue
|
||
Translated:Print Queue
|
||
|
||
English:Print Recovery
|
||
Translated:Print Recovery
|
||
|
||
English:Print Time
|
||
Translated:Print Time
|
||
|
||
English:Print Ultra Fine Calibration
|
||
Translated:Print Ultra Fine Calibration
|
||
|
||
English:Printable Area Inset
|
||
Translated:Printable Area Inset
|
||
|
||
English:Printed Files
|
||
Translated:Printed Files
|
||
|
||
English:Printer
|
||
Translated:Printer
|
||
|
||
English:Printer Advanced
|
||
Translated:Printer Advanced
|
||
|
||
English:Printer Calibration
|
||
Translated:Printer Calibration
|
||
|
||
English:Printer Control
|
||
Translated:Printer Control
|
||
|
||
English:Printer Default
|
||
Translated:Printer Default
|
||
|
||
English:Printer Disconnected
|
||
Translated:Printer Disconnected
|
||
|
||
English:Printer Help
|
||
Translated:Printer Help
|
||
|
||
English:Printer Name
|
||
Translated:Printer Name
|
||
|
||
English:Printer name already exists
|
||
Translated:Printer name already exists
|
||
|
||
English:Printer name cannot be blank
|
||
Translated:Printer name cannot be blank
|
||
|
||
English:Printer Options
|
||
Translated:Printer Options
|
||
|
||
English:Printer Paused
|
||
Translated:Printer Paused
|
||
|
||
English:Printer Setup
|
||
Translated:Printer Setup
|
||
|
||
English:Printer Setup & Calibration
|
||
Translated:Printer Setup & Calibration
|
||
|
||
English:Printer Setup must be run before printing
|
||
Translated:Printer Setup must be run before printing
|
||
|
||
English:Printer Setup Required
|
||
Translated:Printer Setup Required
|
||
|
||
English:Printer SKU
|
||
Translated:Printer SKU
|
||
|
||
English:Printers
|
||
Translated:Printers
|
||
|
||
English:Printers to Copy
|
||
Translated:Printers to Copy
|
||
|
||
English:Printing
|
||
Translated:Printing
|
||
|
||
English:Printing From SD Card
|
||
Translated:Printing From SD Card
|
||
|
||
English:Printing: {0}
|
||
Translated:Printing: {0}
|
||
|
||
English:Prints To Run
|
||
Translated:Prints To Run
|
||
|
||
English:Pro Only
|
||
Translated:Pro Only
|
||
|
||
English:Pro Tools
|
||
Translated:Pro Tools
|
||
|
||
English:Probe
|
||
Translated:Probe
|
||
|
||
English:Probe at bed center
|
||
Translated:Probe at bed center
|
||
|
||
English:Probe Has Been Calibrated
|
||
Translated:Probe Has Been Calibrated
|
||
|
||
English:Probe Offset
|
||
Translated:Probe Offset
|
||
|
||
English:Probe on conductive pad
|
||
Translated:Probe on conductive pad
|
||
|
||
English:Processing
|
||
Translated:Processing
|
||
|
||
English:Progress Reporting
|
||
Translated:Progress Reporting
|
||
|
||
English:Properties
|
||
Translated:Properties
|
||
|
||
English:Provide this code to grant someone read-only access.
|
||
Translated:Provide this code to grant someone read-only access.
|
||
|
||
English:Purchased
|
||
Translated:Purchased
|
||
|
||
English:Push Direction
|
||
Translated:Push Direction
|
||
|
||
English:Push Speed
|
||
Translated:Push Speed
|
||
|
||
English:Push With Hotend
|
||
Translated:Push With Hotend
|
||
|
||
English:px
|
||
Translated:px
|
||
|
||
English:Pyramid
|
||
Translated:Pyramid
|
||
|
||
English:Quality
|
||
Translated:Quality
|
||
|
||
English:Quality Setting
|
||
Translated:Quality Setting
|
||
|
||
English:Queue
|
||
Translated:Queue
|
||
|
||
English:Radial Array
|
||
Translated:Radial Array
|
||
|
||
English:Radius
|
||
Translated:Radius
|
||
|
||
English:Raft
|
||
Translated:Raft
|
||
|
||
English:Raft Extruder
|
||
Translated:Raft Extruder
|
||
|
||
English:Raft Layers
|
||
Translated:Raft Layers
|
||
|
||
English:Raise / Stow
|
||
Translated:Raise / Stow
|
||
|
||
English:Raise extruder
|
||
Translated:Raise extruder
|
||
|
||
English:Randomized
|
||
Translated:Randomized
|
||
|
||
English:Range End
|
||
Translated:Range End
|
||
|
||
English:Range Start
|
||
Translated:Range Start
|
||
|
||
English:Ratio
|
||
Translated:Ratio
|
||
|
||
English:Ratio or %
|
||
Translated:Ratio or %
|
||
|
||
English:Read Filter
|
||
Translated:Read Filter
|
||
|
||
English:ReadFromPrinter thread created.
|
||
Translated:ReadFromPrinter thread created.
|
||
|
||
English:Reboots the firmware on the controller
|
||
Translated:Reboots the firmware on the controller
|
||
|
||
English:Rebuild
|
||
Translated:Rebuild
|
||
|
||
English:Rebuild Thumbnails Now
|
||
Translated:Rebuild Thumbnails Now
|
||
|
||
English:Recommended Settings Changes
|
||
Translated:Recommended Settings Changes
|
||
|
||
English:Recommended Update Available
|
||
Translated:Recommended Update Available
|
||
|
||
English:Recover Last Print
|
||
Translated:Recover Last Print
|
||
|
||
English:Recover Layer Speed
|
||
Translated:Recover Layer Speed
|
||
|
||
English:Recover Print
|
||
Translated:Recover Print
|
||
|
||
English:recovered once
|
||
Translated:recovered once
|
||
|
||
English:Recovered printer profile
|
||
Translated:Recovered printer profile
|
||
|
||
English:rectangular
|
||
Translated:rectangular
|
||
|
||
English:Redeem Code
|
||
Translated:Redeem Code
|
||
|
||
English:Redo
|
||
Translated:Redo
|
||
|
||
English:Reduce
|
||
Translated:Reduce
|
||
|
||
English:Reduced Width
|
||
Translated:Reduced Width
|
||
|
||
English:Re-enter New Password
|
||
Translated:Re-enter New Password
|
||
|
||
English:Re-enter Password
|
||
Translated:Re-enter Password
|
||
|
||
English:Refresh
|
||
Translated:Refresh
|
||
|
||
English:Refresh Folder
|
||
Translated:Refresh Folder
|
||
|
||
English:Release
|
||
Translated:Release
|
||
|
||
English:Release Notes
|
||
Translated:Release Notes
|
||
|
||
English:Reload Failed
|
||
Translated:Reload Failed
|
||
|
||
English:Reloading
|
||
Translated:Reloading
|
||
|
||
English:Remind Me Later
|
||
Translated:Remind Me Later
|
||
|
||
English:remove
|
||
Translated:remove
|
||
|
||
English:Remove
|
||
Translated:Remove
|
||
|
||
English:Remove all auto generated supports
|
||
Translated:Remove all auto generated supports
|
||
|
||
English:Remove Items?
|
||
Translated:Remove Items?
|
||
|
||
English:Remove Mode
|
||
Translated:Remove Mode
|
||
|
||
English:Remove Subtract Objects
|
||
Translated:Remove Subtract Objects
|
||
|
||
English:Remove the bed from the printer so the nozzle can get low enough to touch the pad
|
||
Translated:Remove the bed from the printer so the nozzle can get low enough to touch the pad
|
||
|
||
English:Remove the calibration part from the bed and compare the sides of the pads in each axis.
|
||
Translated:Remove the calibration part from the bed and compare the sides of the pads in each axis.
|
||
|
||
English:Remove the paper
|
||
Translated:Remove the paper
|
||
|
||
English:Rename
|
||
Translated:Rename
|
||
|
||
English:Rename Item
|
||
Translated:Rename Item
|
||
|
||
English:Render As Braille
|
||
Translated:Render As Braille
|
||
|
||
English:Render Leveling Data on the bed
|
||
Translated:Render Leveling Data on the bed
|
||
|
||
English:Repair
|
||
Translated:Repair
|
||
|
||
English:Replace
|
||
Translated:Replace
|
||
|
||
English:Replacing
|
||
Translated:Replacing
|
||
|
||
English:Report a Bug
|
||
Translated:Report a Bug
|
||
|
||
English:Report Filament Runout Sensor Data
|
||
Translated:Report Filament Runout Sensor Data
|
||
|
||
English:Report the data analysis of the run out sensor data each time it is read.
|
||
Translated:Report the data analysis of the run out sensor data each time it is read.
|
||
|
||
English:Request the firmware to do retractions rather than specify the extruder movements directly.
|
||
Translated:Request the firmware to do retractions rather than specify the extruder movements directly.
|
||
|
||
English:Require Leveling To Print
|
||
Translated:Require Leveling To Print
|
||
|
||
English:Required
|
||
Translated:Required
|
||
|
||
English:Reset
|
||
Translated:Reset
|
||
|
||
English:Reset Long Extrusion
|
||
Translated:Reset Long Extrusion
|
||
|
||
English:Reset Password
|
||
Translated:Reset Password
|
||
|
||
English:Reset the line ends back to their starting positions
|
||
Translated:Reset the line ends back to their starting positions
|
||
|
||
English:Reset the position
|
||
Translated:Reset the position
|
||
|
||
English:Reset to Defaults...
|
||
Translated:Reset to Defaults...
|
||
|
||
English:Reset to Factory Defaults
|
||
Translated:Reset to Factory Defaults
|
||
|
||
English:Reset View
|
||
Translated:Reset View
|
||
|
||
English:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
|
||
Translated:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
|
||
|
||
English:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
|
||
Translated:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
|
||
|
||
English:Reshape
|
||
Translated:Reshape
|
||
|
||
English:Resin
|
||
Translated:Resin
|
||
|
||
English:Resin density. Only used for estimating mass in the Layer View.
|
||
Translated:Resin density. Only used for estimating mass in the Layer View.
|
||
|
||
English:Resolution
|
||
Translated:Resolution
|
||
|
||
English:Resources
|
||
Translated:Resources
|
||
|
||
English:Restart Required
|
||
Translated:Restart Required
|
||
|
||
English:Restore
|
||
Translated:Restore
|
||
|
||
English:Restore Default
|
||
Translated:Restore Default
|
||
|
||
English:Restore Settings
|
||
Translated:Restore Settings
|
||
|
||
English:Restore Settings...
|
||
Translated:Restore Settings...
|
||
|
||
English:Restoring
|
||
Translated:Restoring
|
||
|
||
English:Result
|
||
Translated:Result
|
||
|
||
English:Resume
|
||
Translated:Resume
|
||
|
||
English:Resume automatic heater shutdown
|
||
Translated:Resume automatic heater shutdown
|
||
|
||
English:Resume G-Code
|
||
Translated:Resume G-Code
|
||
|
||
English:Resume Print
|
||
Translated:Resume Print
|
||
|
||
English:Resume Printing
|
||
Translated:Resume Printing
|
||
|
||
English:Retract
|
||
Translated:Retract
|
||
|
||
English:Retract Acceleration
|
||
Translated:Retract Acceleration
|
||
|
||
English:Retract filament
|
||
Translated:Retract filament
|
||
|
||
English:Retract Length
|
||
Translated:Retract Length
|
||
|
||
English:Retract When Changing Islands
|
||
Translated:Retract When Changing Islands
|
||
|
||
English:Retraction
|
||
Translated:Retraction
|
||
|
||
English:Retractions
|
||
Translated:Retractions
|
||
|
||
English:Retrieving download info...
|
||
Translated:Retrieving download info...
|
||
|
||
English:Retrieving sync information...
|
||
Translated:Retrieving sync information...
|
||
|
||
English:Retry
|
||
Translated:Retry
|
||
|
||
English:Retry Login
|
||
Translated:Retry Login
|
||
|
||
English:Revert
|
||
Translated:Revert
|
||
|
||
English:Revert Settings
|
||
Translated:Revert Settings
|
||
|
||
English:Reverting firmware to previous version...
|
||
Translated:Reverting firmware to previous version...
|
||
|
||
English:Revolve
|
||
Translated:Revolve
|
||
|
||
English:Right
|
||
Translated:Right
|
||
|
||
English:Right Arrow
|
||
Translated:Right Arrow
|
||
|
||
English:right drag
|
||
Translated:right drag
|
||
|
||
English:Right Inset
|
||
Translated:Right Inset
|
||
|
||
English:Ring
|
||
Translated:Ring
|
||
|
||
English:Ring Phase Angle
|
||
Translated:Ring Phase Angle
|
||
|
||
English:Ring Sides
|
||
Translated:Ring Sides
|
||
|
||
English:Rotate
|
||
Translated:Rotate
|
||
|
||
English:Rotate About
|
||
Translated:Rotate About
|
||
|
||
English:Rotate Part
|
||
Translated:Rotate Part
|
||
|
||
English:Rotate View
|
||
Translated:Rotate View
|
||
|
||
English:Rotate: Right Mouse Button | Ctrl + Left Mouse Button
|
||
Translated:Rotate: Right Mouse Button | Ctrl + Left Mouse Button
|
||
|
||
English:Rotate: Right Mouse Button | Ctrl + Left Mouse Button | Arrow Keys
|
||
Translated:Rotate: Right Mouse Button | Ctrl + Left Mouse Button | Arrow Keys
|
||
|
||
English:Rotate: Right Mouse Button, Ctrl + Left Mouse Button, Arrow Keys
|
||
Translated:Rotate: Right Mouse Button, Ctrl + Left Mouse Button, Arrow Keys
|
||
|
||
English:Rotation Distance
|
||
Translated:Rotation Distance
|
||
|
||
English:Rotation Offset
|
||
Translated:Rotation Offset
|
||
|
||
English:Rotation Slices
|
||
Translated:Rotation Slices
|
||
|
||
English:Rotations
|
||
Translated:Rotations
|
||
|
||
English:Rough Overhangs
|
||
Translated:Rough Overhangs
|
||
|
||
English:Round
|
||
Translated:Round
|
||
|
||
English:Round Segments
|
||
Translated:Round Segments
|
||
|
||
English:Rubber Band Selection
|
||
Translated:Rubber Band Selection
|
||
|
||
English:Run Calibration
|
||
Translated:Run Calibration
|
||
|
||
English:Run Max if Below
|
||
Translated:Run Max if Below
|
||
|
||
English:Run Nozzle Alignment
|
||
Translated:Run Nozzle Alignment
|
||
|
||
English:Run Print Leveling
|
||
Translated:Run Print Leveling
|
||
|
||
English:Run Z Calibration
|
||
Translated:Run Z Calibration
|
||
|
||
English:Runout Check Distance
|
||
Translated:Runout Check Distance
|
||
|
||
English:Runout Trigger Ratio
|
||
Translated:Runout Trigger Ratio
|
||
|
||
English:s
|
||
Translated:s
|
||
|
||
English:Sailfish Communication
|
||
Translated:Sailfish Communication
|
||
|
||
English:Sample Points
|
||
Translated:Sample Points
|
||
|
||
English:Sample the bed center position to determine the probe distance to the bed
|
||
Translated:Sample the bed center position to determine the probe distance to the bed
|
||
|
||
English:Sampled Positions
|
||
Translated:Sampled Positions
|
||
|
||
English:Sampling the conductive pad position to determine the probe distance to the bed
|
||
Translated:Sampling the conductive pad position to determine the probe distance to the bed
|
||
|
||
English:Save
|
||
Translated:Save
|
||
|
||
English:Save As
|
||
Translated:Save As
|
||
|
||
English:Save Changes
|
||
Translated:Save Changes
|
||
|
||
English:Save changes ?
|
||
Translated:Save changes ?
|
||
|
||
English:Save Changes?
|
||
Translated:Save Changes?
|
||
|
||
English:Save file:
|
||
Translated:Save file:
|
||
|
||
English:Save New Design
|
||
Translated:Save New Design
|
||
|
||
English:Save Parts Sheet
|
||
Translated:Save Parts Sheet
|
||
|
||
English:Save to EEProm
|
||
Translated:Save to EEProm
|
||
|
||
English:Save To EEPROM
|
||
Translated:Save To EEPROM
|
||
|
||
English:Saving
|
||
Translated:Saving
|
||
|
||
English:Saving Asset
|
||
Translated:Saving Asset
|
||
|
||
English:Saving changes
|
||
Translated:Saving changes
|
||
|
||
English:Saving Changes
|
||
Translated:Saving Changes
|
||
|
||
English:SCAD Script
|
||
Translated:SCAD Script
|
||
|
||
English:Scale
|
||
Translated:Scale
|
||
|
||
English:Scale About
|
||
Translated:Scale About
|
||
|
||
English:Scale Offset
|
||
Translated:Scale Offset
|
||
|
||
English:Scale Type
|
||
Translated:Scale Type
|
||
|
||
English:SD Card
|
||
Translated:SD Card
|
||
|
||
English:Seam Placement
|
||
Translated:Seam Placement
|
||
|
||
English:Search
|
||
Translated:Search
|
||
|
||
English:Search Results
|
||
Translated:Search Results
|
||
|
||
English:Searching
|
||
Translated:Searching
|
||
|
||
English:seconds
|
||
Translated:seconds
|
||
|
||
English:Sections
|
||
Translated:Sections
|
||
|
||
English:Select
|
||
Translated:Select
|
||
|
||
English:Select a File:
|
||
Translated:Select a File:
|
||
|
||
English:Select A Folder
|
||
Translated:Select A Folder
|
||
|
||
English:Select a new Destination
|
||
Translated:Select a new Destination
|
||
|
||
English:Select a printer to continue
|
||
Translated:Select a printer to continue
|
||
|
||
English:Select all
|
||
Translated:Select all
|
||
|
||
English:Select All
|
||
Translated:Select All
|
||
|
||
English:Select an object to copy its color
|
||
Translated:Select an object to copy its color
|
||
|
||
English:Select cell to edit
|
||
Translated:Select cell to edit
|
||
|
||
English:Select Parts
|
||
Translated:Select Parts
|
||
|
||
English:Select Printer
|
||
Translated:Select Printer
|
||
|
||
English:Select Range
|
||
Translated:Select Range
|
||
|
||
English:Select the baud rate.
|
||
Translated:Select the baud rate.
|
||
|
||
English:Select this option if your material does not appear in the list
|
||
Translated:Select this option if your material does not appear in the list
|
||
|
||
English:Select this option only if your printer does not appear in the list
|
||
Translated:Select this option only if your printer does not appear in the list
|
||
|
||
English:Select What to Import
|
||
Translated:Select What to Import
|
||
|
||
English:Selected Children
|
||
Translated:Selected Children
|
||
|
||
English:Selected Material and Bed Surface are Incompatable
|
||
Translated:Selected Material and Bed Surface are Incompatable
|
||
|
||
English:Selected Material and Bed Surface are Incompatible
|
||
Translated:Selected Material and Bed Surface are Incompatible
|
||
|
||
English:Selected Object Options
|
||
Translated:Selected Object Options
|
||
|
||
English:Selection
|
||
Translated:Selection
|
||
|
||
English:Send
|
||
Translated:Send
|
||
|
||
English:Send email notifications
|
||
Translated:Send email notifications
|
||
|
||
English:Send SMS notifications
|
||
Translated:Send SMS notifications
|
||
|
||
English:Send With Checksum
|
||
Translated:Send With Checksum
|
||
|
||
English:Serial Port
|
||
Translated:Serial Port
|
||
|
||
English:Serial port in use
|
||
Translated:Serial port in use
|
||
|
||
English:Services
|
||
Translated:Services
|
||
|
||
English:Session Cleared
|
||
Translated:Session Cleared
|
||
|
||
English:Session Expired
|
||
Translated:Session Expired
|
||
|
||
English:Set how the printed output should be altered to compensate for the printers mirror.
|
||
Translated:Set how the printed output should be altered to compensate for the printers mirror.
|
||
|
||
English:Set Temperature
|
||
Translated:Set Temperature
|
||
|
||
English:Set the information below to configure your printer. After completing this step, you can customize additional settings under the 'Settings' and 'Printer' options for this printer.
|
||
Translated:Set the information below to configure your printer. After completing this step, you can customize additional settings under the 'Settings' and 'Printer' options for this printer.
|
||
|
||
English:Set the rendering for the object to be transparent
|
||
Translated:Set the rendering for the object to be transparent
|
||
|
||
English:Sets MatterControl to attempt to connect to a printer over the network. (You must disconnect and reconnect for this to take effect)
|
||
Translated:Sets MatterControl to attempt to connect to a printer over the network. (You must disconnect and reconnect for this to take effect)
|
||
|
||
English:Sets MatterControl to use s3g communication method. (You must disconnect and reconnect for this to take effect)
|
||
Translated:Sets MatterControl to use s3g communication method. (You must disconnect and reconnect for this to take effect)
|
||
|
||
English:Sets the models that will be added to the queue when a new printer is created.
|
||
Translated:Sets the models that will be added to the queue when a new printer is created.
|
||
|
||
English:Sets the size of the outer solid surface (perimeter) for the entire print.
|
||
Translated:Sets the size of the outer solid surface (perimeter) for the entire print.
|
||
|
||
English:Setting Name
|
||
Translated:Setting Name
|
||
|
||
English:Settings
|
||
Translated:Settings
|
||
|
||
English:Settings Update Available
|
||
Translated:Settings Update Available
|
||
|
||
English:Settings View Options
|
||
Translated:Settings View Options
|
||
|
||
English:Setup
|
||
Translated:Setup
|
||
|
||
English:Setup Needs to be Run
|
||
Translated:Setup Needs to be Run
|
||
|
||
English:Setup New Printer
|
||
Translated:Setup New Printer
|
||
|
||
English:Setup New Pulse
|
||
Translated:Setup New Pulse
|
||
|
||
English:Setup Printer
|
||
Translated:Setup Printer
|
||
|
||
English:Setup Pulse
|
||
Translated:Setup Pulse
|
||
|
||
English:Setup Wizard
|
||
Translated:Setup Wizard
|
||
|
||
English:Shaded
|
||
Translated:Shaded
|
||
|
||
English:Shape
|
||
Translated:Shape
|
||
|
||
English:Share
|
||
Translated:Share
|
||
|
||
English:Share Code
|
||
Translated:Share Code
|
||
|
||
English:Share Library Item
|
||
Translated:Share Library Item
|
||
|
||
English:Share Options
|
||
Translated:Share Options
|
||
|
||
English:Share Temperature
|
||
Translated:Share Temperature
|
||
|
||
English:Share with someone
|
||
Translated:Share with someone
|
||
|
||
English:Shared with Me
|
||
Translated:Shared with Me
|
||
|
||
English:Shift + G
|
||
Translated:Shift + G
|
||
|
||
English:Shop
|
||
Translated:Shop
|
||
|
||
English:Shop Filament at MatterHackers
|
||
Translated:Shop Filament at MatterHackers
|
||
|
||
English:Show all settings that are not the printer default
|
||
Translated:Show all settings that are not the printer default
|
||
|
||
English:Show Controls
|
||
Translated:Show Controls
|
||
|
||
English:Show file in folder after save
|
||
Translated:Show file in folder after save
|
||
|
||
English:Show Firmware Updater
|
||
Translated:Show Firmware Updater
|
||
|
||
English:Show Folders
|
||
Translated:Show Folders
|
||
|
||
English:Show Help
|
||
Translated:Show Help
|
||
|
||
English:Show in Explorer
|
||
Translated:Show in Explorer
|
||
|
||
English:Show Materials
|
||
Translated:Show Materials
|
||
|
||
English:Show Password
|
||
Translated:Show Password
|
||
|
||
English:Show Print Area
|
||
Translated:Show Print Area
|
||
|
||
English:Show Print Bed
|
||
Translated:Show Print Bed
|
||
|
||
English:Show Printer
|
||
Translated:Show Printer
|
||
|
||
English:Show Ratings Dialog After Print
|
||
Translated:Show Ratings Dialog After Print
|
||
|
||
English:Show Reset Connection
|
||
Translated:Show Reset Connection
|
||
|
||
English:Show Speeds
|
||
Translated:Show Speeds
|
||
|
||
English:Show Terminal
|
||
Translated:Show Terminal
|
||
|
||
English:Show Welcome Message
|
||
Translated:Show Welcome Message
|
||
|
||
English:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
|
||
Translated:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
|
||
|
||
English:Sides
|
||
Translated:Sides
|
||
|
||
English:sign in
|
||
Translated:sign in
|
||
|
||
English:Sign in
|
||
Translated:Sign in
|
||
|
||
English:Sign in Required
|
||
Translated:Sign in Required
|
||
|
||
English:Sign in to access your existing printers
|
||
Translated:Sign in to access your existing printers
|
||
|
||
English:Sign in to my account
|
||
Translated:Sign in to my account
|
||
|
||
English:Sign in to your MatterControl account
|
||
Translated:Sign in to your MatterControl account
|
||
|
||
English:Sign Out
|
||
Translated:Sign Out
|
||
|
||
English:Sign Out?
|
||
Translated:Sign Out?
|
||
|
||
English:Sign Up for an Account
|
||
Translated:Sign Up for an Account
|
||
|
||
English:Simple
|
||
Translated:Simple
|
||
|
||
English:Simple Arduino
|
||
Translated:Simple Arduino
|
||
|
||
English:Size
|
||
Translated:Size
|
||
|
||
English:Skip
|
||
Translated:Skip
|
||
|
||
English:Skip Connection Setup
|
||
Translated:Skip Connection Setup
|
||
|
||
English:Skipped Layers
|
||
Translated:Skipped Layers
|
||
|
||
English:Skirt
|
||
Translated:Skirt
|
||
|
||
English:Skirt Height
|
||
Translated:Skirt Height
|
||
|
||
English:Slice
|
||
Translated:Slice
|
||
|
||
English:Slice Advanced
|
||
Translated:Slice Advanced
|
||
|
||
English:Slice Engine
|
||
Translated:Slice Engine
|
||
|
||
English:Slice Height
|
||
Translated:Slice Height
|
||
|
||
English:Slice Presets Editor
|
||
Translated:Slice Presets Editor
|
||
|
||
English:Slice Settings
|
||
Translated:Slice Settings
|
||
|
||
English:Slicing
|
||
Translated:Slicing
|
||
|
||
English:Slicing Error
|
||
Translated:Slicing Error
|
||
|
||
English:Slicing Item
|
||
Translated:Slicing Item
|
||
|
||
English:Slope
|
||
Translated:Slope
|
||
|
||
English:Slow Down If Layer Print Time Is Below
|
||
Translated:Slow Down If Layer Print Time Is Below
|
||
|
||
English:Small Perimeters
|
||
Translated:Small Perimeters
|
||
|
||
English:Smooth Distance
|
||
Translated:Smooth Distance
|
||
|
||
English:Smooth Path
|
||
Translated:Smooth Path
|
||
|
||
English:Smoothie
|
||
Translated:Smoothie
|
||
|
||
English:Snap Grid
|
||
Translated:Snap Grid
|
||
|
||
English:Snapping Turned Off
|
||
Translated:Snapping Turned Off
|
||
|
||
English:Software License Agreement
|
||
Translated:Software License Agreement
|
||
|
||
English:Solid
|
||
Translated:Solid
|
||
|
||
English:Solid Infill
|
||
Translated:Solid Infill
|
||
|
||
English:Some features may require an internet connection.
|
||
Translated:Some features may require an internet connection.
|
||
|
||
English:Some Parts Lifted
|
||
Translated:Some Parts Lifted
|
||
|
||
English:Some parts may require support structures to print correctly
|
||
Translated:Some parts may require support structures to print correctly
|
||
|
||
English:Some parts may require support structures to print correctly. Check that your parts are on the bed and overhangs are printable.
|
||
Translated:Some parts may require support structures to print correctly. Check that your parts are on the bed and overhangs are printable.
|
||
|
||
English:Some parts may require support structures to print correctly. Check that your parts are on the bed and overhangs can be printed.
|
||
Translated:Some parts may require support structures to print correctly. Check that your parts are on the bed and overhangs can be printed.
|
||
|
||
English:Sometime a mesh will not have closed a perimeter. When this is checked these non-closed perimeters while be closed.
|
||
Translated:Sometime a mesh will not have closed a perimeter. When this is checked these non-closed perimeters while be closed.
|
||
|
||
English:Sorry! Must be a valid email address.
|
||
Translated:Sorry! Must be a valid email address.
|
||
|
||
English:Sorry! Must be a valid U.S. or Canadian phone number.
|
||
Translated:Sorry! Must be a valid U.S. or Canadian phone number.
|
||
|
||
English:Sorry! Looks like an account already exists for that email address.
|
||
Translated:Sorry! Looks like an account already exists for that email address.
|
||
|
||
English:Sorry! Looks like an account already exists for that username.
|
||
Translated:Sorry! Looks like an account already exists for that username.
|
||
|
||
English:Sorry! Looks like that reset code has expired.
|
||
Translated:Sorry! Looks like that reset code has expired.
|
||
|
||
English:Sorry! Looks like that reset code is invalid.
|
||
Translated:Sorry! Looks like that reset code is invalid.
|
||
|
||
English:Sorry! Too many sign in attempts. Please try again later.
|
||
Translated:Sorry! Too many sign in attempts. Please try again later.
|
||
|
||
English:Sorry! Unable to connect to server. Please try again later.
|
||
Translated:Sorry! Unable to connect to server. Please try again later.
|
||
|
||
English:Sorry! We couldn't find that account.
|
||
Translated:Sorry! We couldn't find that account.
|
||
|
||
English:Sorting
|
||
Translated:Sorting
|
||
|
||
English:Source
|
||
Translated:Source
|
||
|
||
English:Source Polygon Count
|
||
Translated:Source Polygon Count
|
||
|
||
English:Specifies that the firmware has support for ros_0 endstop reporting on M119. TRIGGERED state defines filament has runout. If runout is detected the printers pause G-Code is run.
|
||
Translated:Specifies that the firmware has support for ros_0 endstop reporting on M119. TRIGGERED state defines filament has runout. If runout is detected the printers pause G-Code is run.
|
||
|
||
English:Speed
|
||
Translated:Speed
|
||
|
||
English:Speed Multiplier
|
||
Translated:Speed Multiplier
|
||
|
||
English:Speed Overrides
|
||
Translated:Speed Overrides
|
||
|
||
English:Speeds
|
||
Translated:Speeds
|
||
|
||
English:Sphere
|
||
Translated:Sphere
|
||
|
||
English:Spiral Vase
|
||
Translated:Spiral Vase
|
||
|
||
English:Split
|
||
Translated:Split
|
||
|
||
English:Split Mesh
|
||
Translated:Split Mesh
|
||
|
||
English:Stable
|
||
Translated:Stable
|
||
|
||
English:Stable: The current release version of MatterControl (recommended)
|
||
Translated:Stable: The current release version of MatterControl (recommended)
|
||
|
||
English:Star
|
||
Translated:Star
|
||
|
||
English:Start
|
||
Translated:Start
|
||
|
||
English:Start At Concave Points
|
||
Translated:Start At Concave Points
|
||
|
||
English:Start At Non Overhang
|
||
Translated:Start At Non Overhang
|
||
|
||
English:Start End Overlap
|
||
Translated:Start End Overlap
|
||
|
||
English:Start G-Code
|
||
Translated:Start G-Code
|
||
|
||
English:Start G-Code cannot contain G29 if Print Leveling is enabled.
|
||
Translated:Start G-Code cannot contain G29 if Print Leveling is enabled.
|
||
|
||
English:Start G-Code cannot contain G29 if Print Recovery is enabled.
|
||
Translated:Start G-Code cannot contain G29 if Print Recovery is enabled.
|
||
|
||
English:Start G-Code cannot contain G30 if Print Leveling is enabled.
|
||
Translated:Start G-Code cannot contain G30 if Print Leveling is enabled.
|
||
|
||
English:Start Height
|
||
Translated:Start Height
|
||
|
||
English:Start Height Percent
|
||
Translated:Start Height Percent
|
||
|
||
English:Start New Design
|
||
Translated:Start New Design
|
||
|
||
English:Start Percent
|
||
Translated:Start Percent
|
||
|
||
English:Start Print
|
||
Translated:Start Print
|
||
|
||
English:Start Printing
|
||
Translated:Start Printing
|
||
|
||
English:Start printing the current bed.
|
||
Translated:Start printing the current bed.
|
||
|
||
English:Start the printer(s) that are ready to print.
|
||
Translated:Start the printer(s) that are ready to print.
|
||
|
||
English:Starting Angle
|
||
Translated:Starting Angle
|
||
|
||
English:Starting firmware update...
|
||
Translated:Starting firmware update...
|
||
|
||
English:Starting Sync
|
||
Translated:Starting Sync
|
||
|
||
English:Startup Failure
|
||
Translated:Startup Failure
|
||
|
||
English:Stay Connected
|
||
Translated:Stay Connected
|
||
|
||
English:Step
|
||
Translated:Step
|
||
|
||
English:Steps per mm
|
||
Translated:Steps per mm
|
||
|
||
English:STL File
|
||
Translated:STL File
|
||
|
||
English:Stop
|
||
Translated:Stop
|
||
|
||
English:Stop trying to connect to the printer.
|
||
Translated:Stop trying to connect to the printer.
|
||
|
||
English:Stretch X
|
||
Translated:Stretch X
|
||
|
||
English:Stretch Y
|
||
Translated:Stretch Y
|
||
|
||
English:Stretch Z
|
||
Translated:Stretch Z
|
||
|
||
English:Stringing / Poor retractions
|
||
Translated:Stringing / Poor retractions
|
||
|
||
English:Style
|
||
Translated:Style
|
||
|
||
English:SubAlign
|
||
Translated:SubAlign
|
||
|
||
English:Subtract
|
||
Translated:Subtract
|
||
|
||
English:Subtract & Replace
|
||
Translated:Subtract & Replace
|
||
|
||
English:Success! Please check your email for the reset code.
|
||
Translated:Success! Please check your email for the reset code.
|
||
|
||
English:Success! Your account has been created.
|
||
Translated:Success! Your account has been created.
|
||
|
||
English:Success! Your password has been updated.
|
||
Translated:Success! Your password has been updated.
|
||
|
||
English:Success!\n\nYour filament should now be loaded
|
||
Translated:Success!\n\nYour filament should now be loaded
|
||
|
||
English:Success!\n\nYour filament should now be unloaded
|
||
Translated:Success!\n\nYour filament should now be unloaded
|
||
|
||
English:Success!\n\nYour filament should now be loaded
|
||
Translated:Success!\n\nYour filament should now be loaded
|
||
|
||
English:Success!\n\nYour filament should now be unloaded
|
||
Translated:Success!\n\nYour filament should now be unloaded
|
||
|
||
English:Support
|
||
Translated:Support
|
||
|
||
English:Support Expand Distance
|
||
Translated:Support Expand Distance
|
||
|
||
English:Support Interface Extruder
|
||
Translated:Support Interface Extruder
|
||
|
||
English:Support Material
|
||
Translated:Support Material
|
||
|
||
English:Support Material Extruder
|
||
Translated:Support Material Extruder
|
||
|
||
English:Support Type
|
||
Translated:Support Type
|
||
|
||
English:Surfaced Editor
|
||
Translated:Surfaced Editor
|
||
|
||
English:Surfaced Editors
|
||
Translated:Surfaced Editors
|
||
|
||
English:Switch
|
||
Translated:Switch
|
||
|
||
English:Switch to new G-Code on next layer?
|
||
Translated:Switch to new G-Code on next layer?
|
||
|
||
English:Switch to new G-Code?\n\nBefore you switch, check that you are seeing the changes you expect.
|
||
Translated:Switch to new G-Code?\n\nBefore you switch, check that you are seeing the changes you expect.
|
||
|
||
English:Sync Complete
|
||
Translated:Sync Complete
|
||
|
||
English:Sync Dashboard
|
||
Translated:Sync Dashboard
|
||
|
||
English:Sync Printers
|
||
Translated:Sync Printers
|
||
|
||
English:Sync To Print
|
||
Translated:Sync To Print
|
||
|
||
English:Syncing Printer Profiles...
|
||
Translated:Syncing Printer Profiles...
|
||
|
||
English:Target Count
|
||
Translated:Target Count
|
||
|
||
English:Target Percent
|
||
Translated:Target Percent
|
||
|
||
English:Tee
|
||
Translated:Tee
|
||
|
||
English:Temp Lower Amount
|
||
Translated:Temp Lower Amount
|
||
|
||
English:Temperature
|
||
Translated:Temperature
|
||
|
||
English:Temperature Requests
|
||
Translated:Temperature Requests
|
||
|
||
English:Temperature Responses
|
||
Translated:Temperature Responses
|
||
|
||
English:Temperature Tower
|
||
Translated:Temperature Tower
|
||
|
||
English:Terminal
|
||
Translated:Terminal
|
||
|
||
English:Terrible
|
||
Translated:Terrible
|
||
|
||
English:Test Print
|
||
Translated:Test Print
|
||
|
||
English:Text
|
||
Translated:Text
|
||
|
||
English:Text Size
|
||
Translated:Text Size
|
||
|
||
English:Text2
|
||
Translated:Text2
|
||
|
||
English:The {0} can only go as high as 100%.
|
||
Translated:The {0} can only go as high as 100%.
|
||
|
||
English:The {0} must be at least 1.
|
||
Translated:The {0} must be at least 1.
|
||
|
||
English:The {0} must be between 0 and 1.
|
||
Translated:The {0} must be between 0 and 1.
|
||
|
||
English:The {0} must be greater than 0.
|
||
Translated:The {0} must be greater than 0.
|
||
|
||
English:The acceleration that the printer will be set to by default, will not be changed if set to 0. A typical default acceleration is 1500.
|
||
Translated:The acceleration that the printer will be set to by default, will not be changed if set to 0. A typical default acceleration is 1500.
|
||
|
||
English:The acceleration that the printer will be set to for perimeters, will not be changed if set to 0. A typical perimeter acceleration is 800.
|
||
Translated:The acceleration that the printer will be set to for perimeters, will not be changed if set to 0. A typical perimeter acceleration is 800.
|
||
|
||
English:The actual diameter of the filament used for printing.
|
||
Translated:The actual diameter of the filament used for printing.
|
||
|
||
English:The amount of filament to insert into the printer when loading.
|
||
Translated:The amount of filament to insert into the printer when loading.
|
||
|
||
English:The amount of filament to remove from the printer while unloading.
|
||
Translated:The amount of filament to remove from the printer while unloading.
|
||
|
||
English:The amount of infill material to generate, expressed as a ratio or a percentage.
|
||
Translated:The amount of infill material to generate, expressed as a ratio or a percentage.
|
||
|
||
English:The amount the infill edge will push into the perimeter. Helps ensure the infill is connected to the edge. This can be expressed as a percentage of the Nozzle Diameter.
|
||
Translated:The amount the infill edge will push into the perimeter. Helps ensure the infill is connected to the edge. This can be expressed as a percentage of the Nozzle Diameter.
|
||
|
||
English:The amount to expand the support so it is easy to grab.
|
||
Translated:The amount to expand the support so it is easy to grab.
|
||
|
||
English:The amount to lower the temperature when the hotend is inactive.
|
||
Translated:The amount to lower the temperature when the hotend is inactive.
|
||
|
||
English:The angle at which the support material lines will be drawn.
|
||
Translated:The angle at which the support material lines will be drawn.
|
||
|
||
English:The angle of the infill, measured from the X axis. Not used when bridging.
|
||
Translated:The angle of the infill, measured from the X axis. Not used when bridging.
|
||
|
||
English:The angle to generate support for
|
||
Translated:The angle to generate support for
|
||
|
||
English:The average distance along the perimeter to change the depth of the fuzzy pattern. You can think of this as the smoothness of the pattern.\n\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the area you want to make Fuzzy
|
||
Translated:The average distance along the perimeter to change the depth of the fuzzy pattern. You can think of this as the smoothness of the pattern.\n\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the area you want to make Fuzzy
|
||
|
||
English:The average distance along the perimeter to change the depth of the fuzzy pattern. You can think of this as the smoothness of the pattern.\n\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the arrears you want to make Fuzzy
|
||
Translated:The average distance along the perimeter to change the depth of the fuzzy pattern. You can think of this as the smoothness of the pattern.\n\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the arrears you want to make Fuzzy
|
||
|
||
English:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
|
||
Translated:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
|
||
|
||
English:The calibration object will printer better if the layer hight is set to a larger value. It is recommended that your increase it.
|
||
Translated:The calibration object will printer better if the layer hight is set to a larger value. It is recommended that your increase it.
|
||
|
||
English:The center of the conductive pad used for nozzle probing.
|
||
Translated:The center of the conductive pad used for nozzle probing.
|
||
|
||
English:The chosen baud rate is not supported by your operating system. Use a different baud rate, if possible.
|
||
Translated:The chosen baud rate is not supported by your operating system. Use a different baud rate, if possible.
|
||
|
||
English:The color of the first material.
|
||
Translated:The color of the first material.
|
||
|
||
English:The color of the forth material (extruder 4).
|
||
Translated:The color of the forth material (extruder 4).
|
||
|
||
English:The color of the second material (extruder 2).
|
||
Translated:The color of the second material (extruder 2).
|
||
|
||
English:The color of the third material (extruder 3).
|
||
Translated:The color of the third material (extruder 3).
|
||
|
||
English:The current bed surfaces that the printer is using. This is used to set the correct bed temperature for a given material.
|
||
Translated:The current bed surfaces that the printer is using. This is used to set the correct bed temperature for a given material.
|
||
|
||
English:The date this file was originally created.
|
||
Translated:The date this file was originally created.
|
||
|
||
English:The default settings for this printer have changed and can be updated
|
||
Translated:The default settings for this printer have changed and can be updated
|
||
|
||
English:The deviation from the last measured value allowed without re-calculating the leveling solution.
|
||
Translated:The deviation from the last measured value allowed without re-calculating the leveling solution.
|
||
|
||
English:The diameter of the extruder's nozzle.
|
||
Translated:The diameter of the extruder's nozzle.
|
||
|
||
English:The distance between support material lines.
|
||
Translated:The distance between support material lines.
|
||
|
||
English:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
|
||
Translated:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
|
||
|
||
English:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
|
||
Translated:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
|
||
|
||
English:The distance filament will reverse before each qualifying non-print move
|
||
Translated:The distance filament will reverse before each qualifying non-print move
|
||
|
||
English:The distance from the model at which the first skirt loop is drawn.
|
||
Translated:The distance from the model at which the first skirt loop is drawn.
|
||
|
||
English:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
|
||
Translated:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
|
||
|
||
English:The distance that the filament has to extrude before we check the measured distance.
|
||
Translated:The distance that the filament has to extrude before we check the measured distance.
|
||
|
||
English:The distance the nozzle will lift after each retraction.
|
||
Translated:The distance the nozzle will lift after each retraction.
|
||
|
||
English:The distance the support material will be from the object in the X and Y directions.
|
||
Translated:The distance the support material will be from the object in the X and Y directions.
|
||
|
||
English:The distance to move the build plate after each base layer prints.
|
||
Translated:The distance to move the build plate after each base layer prints.
|
||
|
||
English:The distance to move the build plate after each layer prints.
|
||
Translated:The distance to move the build plate after each layer prints.
|
||
|
||
English:The distance to travel after completing a perimeter to improve seams.
|
||
Translated:The distance to travel after completing a perimeter to improve seams.
|
||
|
||
English:The extra distance the raft will extend around the edge of the part.
|
||
Translated:The extra distance the raft will extend around the edge of the part.
|
||
|
||
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
|
||
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
|
||
|
||
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
|
||
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
|
||
|
||
English:The extruder to use for support material. Default will use whichever extruder active at the time.
|
||
Translated:The extruder to use for support material. Default will use whichever extruder active at the time.
|
||
|
||
English:The extruder to use for the brim. Default will use the first extruder of the print.
|
||
Translated:The extruder to use for the brim. Default will use the first extruder of the print.
|
||
|
||
English:The extruder to use to for support material interface layers. Default will use whichever extruder active at the time.
|
||
Translated:The extruder to use to for support material interface layers. Default will use whichever extruder active at the time.
|
||
|
||
English:The extruder to use to print the raft. Default will use extruder 1.
|
||
Translated:The extruder to use to print the raft. Default will use extruder 1.
|
||
|
||
English:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
|
||
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
|
||
|
||
English:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
|
||
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
|
||
|
||
English:The firmware being used by the printer. Allows for improvements based on firmware such as optimized G-Code output.
|
||
Translated:The firmware being used by the printer. Allows for improvements based on firmware such as optimized G-Code output.
|
||
|
||
English:The geometric shape of the support structure for the inside of parts.
|
||
Translated:The geometric shape of the support structure for the inside of parts.
|
||
|
||
English:The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.
|
||
Translated:The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.
|
||
|
||
English:The ideal resistance is when the paper first begins to bend
|
||
Translated:The ideal resistance is when the paper first begins to bend
|
||
|
||
English:The ideal resistance is when the paper first begins to bend, but can still be moved\n
|
||
Translated:The ideal resistance is when the paper first begins to bend, but can still be moved\n
|
||
|
||
English:The ideal resistance is when the paper first begins to bend, but can still be moved.
|
||
Translated:The ideal resistance is when the paper first begins to bend, but can still be moved.
|
||
|
||
English:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
|
||
Translated:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
|
||
|
||
English:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
|
||
Translated:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
|
||
|
||
English:The inset amount for nozzle 1 from the bed (Left, Front, Right, Back).
|
||
Translated:The inset amount for nozzle 1 from the bed (Left, Front, Right, Back).
|
||
|
||
English:The inset amount for nozzle 2 from the bed (Left, Front, Right, Back).
|
||
Translated:The inset amount for nozzle 2 from the bed (Left, Front, Right, Back).
|
||
|
||
English:The inset amount from the edges of the bed. Defines the printable area of the bed. Leave as 0s if the entire bed can be printed to (Left, Front, Right, Back).
|
||
Translated:The inset amount from the edges of the bed. Defines the printable area of the bed. Leave as 0s if the entire bed can be printed to (Left, Front, Right, Back).
|
||
|
||
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
|
||
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
|
||
|
||
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37". Rafts layers are not considered. The 1st pause layer is the first above the raft.
|
||
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37". Rafts layers are not considered. The 1st pause layer is the first above the raft.
|
||
|
||
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\".
|
||
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\".
|
||
|
||
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\". Rafts layers are not considered. The 1st pause layer is the first above the raft.
|
||
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\". Rafts layers are not considered. The 1st pause layer is the first above the raft.
|
||
|
||
English:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
|
||
Translated:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
|
||
|
||
English:The leveling data might be invalid. It changes by as much as {0:0.##}mm. Leveling calibration should be re-run
|
||
Translated:The leveling data might be invalid. It changes by as much as {0:0.##}mm. Leveling calibration should be re-run
|
||
|
||
English:The Markdown that will be shown on the Clean Filament page.
|
||
Translated:The Markdown that will be shown on the Clean Filament page.
|
||
|
||
English:The Markdown that will be shown on the Insert Filament page.
|
||
Translated:The Markdown that will be shown on the Insert Filament page.
|
||
|
||
English:The Markdown that will be shown on the second extruders Clean Filament page.
|
||
Translated:The Markdown that will be shown on the second extruders Clean Filament page.
|
||
|
||
English:The Markdown that will be shown on the second extruders Insert Filament page.
|
||
Translated:The Markdown that will be shown on the second extruders Insert Filament page.
|
||
|
||
English:The Markdown that will be shown on the Trim Filament page.
|
||
Translated:The Markdown that will be shown on the Trim Filament page.
|
||
|
||
English:The Material you have selected is incompatible with the Bed Surface you have selected. You may get poor bed adhesion or printing results. Changing the bed is recommended.
|
||
Translated:The Material you have selected is incompatible with the Bed Surface you have selected. You may get poor bed adhesion or printing results. Changing the bed is recommended.
|
||
|
||
English:The 'Material' you have selected is incompatible with the 'Bed Surface' you have selected. You may get poor bed adhesion or printing results. Changing the 'Bed Surface' is recommended. You can change it in the 'Bed Temperature' menu on the top right of your screen.
|
||
Translated:The 'Material' you have selected is incompatible with the 'Bed Surface' you have selected. You may get poor bed adhesion or printing results. Changing the 'Bed Surface' is recommended. You can change it in the 'Bed Temperature' menu on the top right of your screen.
|
||
|
||
English:The maximum amount that an avoid crossing travel can exceed the direct distance. If the avoid travel is too long, a direct move will be executed.
|
||
Translated:The maximum amount that an avoid crossing travel can exceed the direct distance. If the avoid travel is too long, a direct move will be executed.
|
||
|
||
English:The maximum amount the printer can accelerate on a G-Code move. Used for print time estimation.
|
||
Translated:The maximum amount the printer can accelerate on a G-Code move. Used for print time estimation.
|
||
|
||
English:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
||
Translated:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
||
|
||
English:The maximum speed that the printer treats as 0 and changes direction instantly. Used for print time estimation.
|
||
Translated:The maximum speed that the printer treats as 0 and changes direction instantly. Used for print time estimation.
|
||
|
||
English:The maximum speed the printer can move. Uused for print time estimation.
|
||
Translated:The maximum speed the printer can move. Uused for print time estimation.
|
||
|
||
English:The maximum speed the printer will extrude filament. All extrusion speeds will be clamped to this amount. Set to 0 to have no effect.
|
||
Translated:The maximum speed the printer will extrude filament. All extrusion speeds will be clamped to this amount. Set to 0 to have no effect.
|
||
|
||
English:The maximum thickness the fuzz will be from the surface.\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the area you want to make Fuzzy
|
||
Translated:The maximum thickness the fuzz will be from the surface.\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the area you want to make Fuzzy
|
||
|
||
English:The maximum thickness the fuzz will be from the surface.\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the area you want to make Fuzzy
|
||
Translated:The maximum thickness the fuzz will be from the surface.\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the area you want to make Fuzzy
|
||
|
||
English:The maximum thickness the fuzz will be from the surface.\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the arrears you want to make Fuzzy
|
||
Translated:The maximum thickness the fuzz will be from the surface.\nTo Create:\n- Right Click a part\n - Modify\n - Printing\n - Convert to Fuzzy Region\n- Place over the arrears you want to make Fuzzy
|
||
|
||
English:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
|
||
Translated:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
|
||
|
||
English:The minimum amount of time the light must be off between exposures.
|
||
Translated:The minimum amount of time the light must be off between exposures.
|
||
|
||
English:The minimum distance of a non-print move which will trigger a retraction.
|
||
Translated:The minimum distance of a non-print move which will trigger a retraction.
|
||
|
||
English:The minimum distance with, avoid crossing perimeters turned on, of a non-print move which will trigger a retraction.
|
||
Translated:The minimum distance with, avoid crossing perimeters turned on, of a non-print move which will trigger a retraction.
|
||
|
||
English:The minimum length of filament that must be extruded before a retraction can occur.
|
||
Translated:The minimum length of filament that must be extruded before a retraction can occur.
|
||
|
||
English:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value. NOTE: This is measure as input into the extruder not mm on the bed.
|
||
Translated:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value. NOTE: This is measure as input into the extruder not mm on the bed.
|
||
|
||
English:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power, regardless of layer time.
|
||
Translated:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power, regardless of layer time.
|
||
|
||
English:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
||
Translated:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
||
|
||
English:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
|
||
Translated:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
|
||
|
||
English:The minimum z to allow the probe to go to before the test is stopped and marked as failing. This is used to ensure the printer is not damaged.
|
||
Translated:The minimum z to allow the probe to go to before the test is stopped and marked as failing. This is used to ensure the printer is not damaged.
|
||
|
||
English:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
|
||
Translated:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
|
||
|
||
English:The number of degrees Centigrade to lower the temperature of a nozzle while it is not active.
|
||
Translated:The number of degrees Centigrade to lower the temperature of a nozzle while it is not active.
|
||
|
||
English:The number of extruders the printer has.
|
||
Translated:The number of extruders the printer has.
|
||
|
||
English:The number of layers for which the layer cooling fan will be forced off at the start of the print.
|
||
Translated:The number of layers for which the layer cooling fan will be forced off at the start of the print.
|
||
|
||
English:The number of layers or the distance in millimeters to print bottom layers. Bottom layers help adhere parts to the build plate. Add mm to the end of the number to specify distance in millimeters.
|
||
Translated:The number of layers or the distance in millimeters to print bottom layers. Bottom layers help adhere parts to the build plate. Add mm to the end of the number to specify distance in millimeters.
|
||
|
||
English:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
||
Translated:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
||
|
||
English:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
|
||
Translated:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
|
||
|
||
English:The number of layers to consider as the beginning of the print. These will print at initial layer speed.
|
||
Translated:The number of layers to consider as the beginning of the print. These will print at initial layer speed.
|
||
|
||
English:The number of layers to create the brims. This can make the brim stronger when needed.
|
||
Translated:The number of layers to create the brims. This can make the brim stronger when needed.
|
||
|
||
English:The number of layers to draw the skirt.
|
||
Translated:The number of layers to draw the skirt.
|
||
|
||
English:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
||
Translated:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
||
|
||
English:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
|
||
Translated:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
|
||
|
||
English:The number of loops to draw around parts. Used to provide additional bed adhesion
|
||
Translated:The number of loops to draw around parts. Used to provide additional bed adhesion
|
||
|
||
English:The number of perimeters will be this number times the number of active extruders. Make this a smaller number to make the wipe more hollow or bigger to fill it.
|
||
Translated:The number of perimeters will be this number times the number of active extruders. Make this a smaller number to make the wipe more hollow or bigger to fill it.
|
||
|
||
English:The number of seconds to expose the base layers. This can increase the bonding to the build plate.
|
||
Translated:The number of seconds to expose the base layers. This can increase the bonding to the build plate.
|
||
|
||
English:The number of times to sample each probe position (results will be averaged).
|
||
Translated:The number of times to sample each probe position (results will be averaged).
|
||
|
||
English:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
|
||
Translated:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
|
||
|
||
English:The offset from T0 to the probe.
|
||
Translated:The offset from T0 to the probe.
|
||
|
||
English:The offset of each nozzle relative to the first nozzle. Only useful for multiple extruder machines.
|
||
Translated:The offset of each nozzle relative to the first nozzle. Only useful for multiple extruder machines.
|
||
|
||
English:The pattern to draw for the generation of support material.
|
||
Translated:The pattern to draw for the generation of support material.
|
||
|
||
English:The percentage overlap a given printed line must have over the layer below to be supported.
|
||
Translated:The percentage overlap a given printed line must have over the layer below to be supported.
|
||
|
||
English:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
|
||
Translated:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
|
||
|
||
English:The price of one kilogram of filament. Used for estimating the cost of a print in the Layer View.
|
||
Translated:The price of one kilogram of filament. Used for estimating the cost of a print in the Layer View.
|
||
|
||
English:The price of one kilogram of resin. Used for estimating the cost of a print in the Layer View.
|
||
Translated:The price of one kilogram of resin. Used for estimating the cost of a print in the Layer View.
|
||
|
||
English:The print leveling algorithm to use.
|
||
Translated:The print leveling algorithm to use.
|
||
|
||
English:The printer has a c axis used by a tool changer (e3d quad extruder).
|
||
Translated:The printer has a c axis used by a tool changer (e3d quad extruder).
|
||
|
||
English:The printer has a heated bed.
|
||
Translated:The printer has a heated bed.
|
||
|
||
English:The printer has a layer-cooling fan.
|
||
Translated:The printer has a layer-cooling fan.
|
||
|
||
English:The printer has a SD card reader.
|
||
Translated:The printer has a SD card reader.
|
||
|
||
English:The printer has a servo for lowering and raising the z probe.
|
||
Translated:The printer has a servo for lowering and raising the z probe.
|
||
|
||
English:The printer has a z probe for measuring bed level.
|
||
Translated:The printer has a z probe for measuring bed level.
|
||
|
||
English:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
|
||
Translated:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
|
||
|
||
English:The printer has the ability to check for continuity on the nozzle.
|
||
Translated:The printer has the ability to check for continuity on the nozzle.
|
||
|
||
English:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
|
||
Translated:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
|
||
|
||
English:The printer has the ability to move each motor independently and the firmware has G34 enabled.
|
||
Translated:The printer has the ability to move each motor independently and the firmware has G34 enabled.
|
||
|
||
English:The printer has the ability to move each z motor independently and the firmware has [G34](https://reprap.org/wiki/G-code#G34:_Z_Stepper_Auto-Align) enabled.
|
||
Translated:The printer has the ability to move each z motor independently and the firmware has [G34](https://reprap.org/wiki/G-code#G34:_Z_Stepper_Auto-Align) enabled.
|
||
|
||
English:The printer has the ability to move each z motor independently and the firmware has G34 enabled.
|
||
Translated:The printer has the ability to move each z motor independently and the firmware has G34 enabled.
|
||
|
||
English:The printer is now aliging the z-axis. It will do the following:
|
||
Translated:The printer is now aliging the z-axis. It will do the following:
|
||
|
||
English:The printer moved below the minimum height set for conductive probing.
|
||
Translated:The printer moved below the minimum height set for conductive probing.
|
||
|
||
English:The printer moved below the minimum height set for conductive probing. Check that the nozzle is clean and there is continuity with the pad.
|
||
Translated:The printer moved below the minimum height set for conductive probing. Check that the nozzle is clean and there is continuity with the pad.
|
||
|
||
English:The printer requires print leveling to run correctly.
|
||
Translated:The printer requires print leveling to run correctly.
|
||
|
||
English:The printer should now be 'homing'.
|
||
Translated:The printer should now be 'homing'.
|
||
|
||
English:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
|
||
Translated:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
|
||
|
||
English:The ratio between the requested extrusion and the sensors measured extrusion that will trigger an error.
|
||
Translated:The ratio between the requested extrusion and the sensors measured extrusion that will trigger an error.
|
||
|
||
English:The semaphore timeout period has expired.
|
||
Translated:The semaphore timeout period has expired.
|
||
|
||
English:The serial driver to use
|
||
Translated:The serial driver to use
|
||
|
||
English:The serial port communication speed of the printers firmware.
|
||
Translated:The serial port communication speed of the printers firmware.
|
||
|
||
English:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
|
||
Translated:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
|
||
|
||
English:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
|
||
Translated:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
|
||
|
||
English:The serial port to use while connecting to this printer.
|
||
Translated:The serial port to use while connecting to this printer.
|
||
|
||
English:The shape of the physical print bed.
|
||
Translated:The shape of the physical print bed.
|
||
|
||
English:The slicer to use.
|
||
Translated:The slicer to use.
|
||
|
||
English:The speed at which bridging between walls will print.
|
||
Translated:The speed at which bridging between walls will print.
|
||
|
||
English:The speed at which filament will retract and re-extrude.
|
||
Translated:The speed at which filament will retract and re-extrude.
|
||
|
||
English:The speed at which infill will print.
|
||
Translated:The speed at which infill will print.
|
||
|
||
English:The speed at which inside perimeters will print.
|
||
Translated:The speed at which inside perimeters will print.
|
||
|
||
English:The speed at which interface layers will print.
|
||
Translated:The speed at which interface layers will print.
|
||
|
||
English:The speed at which outside, external, or the otherwise visible perimeters will print.
|
||
Translated:The speed at which outside, external, or the otherwise visible perimeters will print.
|
||
|
||
English:The speed at which support material structures will print.
|
||
Translated:The speed at which support material structures will print.
|
||
|
||
English:The speed at which the bottom solid layers will print. Can be set explicitly or as a percentage of the Infill speed. Use 0 to match infill speed.
|
||
Translated:The speed at which the bottom solid layers will print. Can be set explicitly or as a percentage of the Infill speed. Use 0 to match infill speed.
|
||
|
||
English:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
|
||
Translated:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
|
||
|
||
English:The speed at which the layer on top of the air gap will print.
|
||
Translated:The speed at which the layer on top of the air gap will print.
|
||
|
||
English:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
|
||
Translated:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
|
||
|
||
English:The speed at which the nozzle will move when not extruding material.
|
||
Translated:The speed at which the nozzle will move when not extruding material.
|
||
|
||
English:The speed at which the nozzle will move when printing the initial layers. If expressed as a percentage the Infill speed is modified.
|
||
Translated:The speed at which the nozzle will move when printing the initial layers. If expressed as a percentage the Infill speed is modified.
|
||
|
||
English:The speed at which the nozzle will move when recovering a failed print, for 1 layer.
|
||
Translated:The speed at which the nozzle will move when recovering a failed print, for 1 layer.
|
||
|
||
English:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
|
||
Translated:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
|
||
|
||
English:The speed to move the build plate after each base layer prints.
|
||
Translated:The speed to move the build plate after each base layer prints.
|
||
|
||
English:The speed to move the build plate after each layer prints.
|
||
Translated:The speed to move the build plate after each layer prints.
|
||
|
||
English:The speed to move the build plate back down after lifting.
|
||
Translated:The speed to move the build plate back down after lifting.
|
||
|
||
English:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
|
||
Translated:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
|
||
|
||
English:The speed to run filament into and out of the printer.
|
||
Translated:The speed to run filament into and out of the printer.
|
||
|
||
English:The starting height (z) of the print head before probing each print level position.
|
||
Translated:The starting height (z) of the print head before probing each print level position.
|
||
|
||
English:The target temperature the bed will attempt to reach during the first layer of the print.
|
||
Translated:The target temperature the bed will attempt to reach during the first layer of the print.
|
||
|
||
English:The target temperature the extruder will attempt to reach during the print.
|
||
Translated:The target temperature the extruder will attempt to reach during the print.
|
||
|
||
English:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
|
||
Translated:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
|
||
|
||
English:The temperature for the 'Bed Surface' you have selected is set to 0. You may get poor bed adhesion or printing results. You can change the temperature in the 'Bed Temperature' menu on the top right of your screen.
|
||
Translated:The temperature for the 'Bed Surface' you have selected is set to 0. You may get poor bed adhesion or printing results. You can change the temperature in the 'Bed Temperature' menu on the top right of your screen.
|
||
|
||
English:The temperature to print when the bed is coverd in kapton tape. Set to 0 to disable or 'NC' if Not Compatible.
|
||
Translated:The temperature to print when the bed is coverd in kapton tape. Set to 0 to disable or 'NC' if Not Compatible.
|
||
|
||
English:The temperature to print when the bed is coverd in kapton tape. Set to 0 to disable.
|
||
Translated:The temperature to print when the bed is coverd in kapton tape. Set to 0 to disable.
|
||
|
||
English:The temperature to print when the bed is coverd in kapton tape. Set to 0 to use default.
|
||
Translated:The temperature to print when the bed is coverd in kapton tape. Set to 0 to use default.
|
||
|
||
English:The temperature to print when the bed is coverd with blue tape. Set to 0 to disable or 'NC' if Not Compatible.
|
||
Translated:The temperature to print when the bed is coverd with blue tape. Set to 0 to disable or 'NC' if Not Compatible.
|
||
|
||
English:The temperature to print when the bed is coverd with blue tape. Set to 0 to disable.
|
||
Translated:The temperature to print when the bed is coverd with blue tape. Set to 0 to disable.
|
||
|
||
English:The temperature to print when the bed is coverd with blue tape. Set to 0 to use default.
|
||
Translated:The temperature to print when the bed is coverd with blue tape. Set to 0 to use default.
|
||
|
||
English:The temperature to print when the bed is polypropylene. Set to 0 to disable or 'NC' if Not Compatible.
|
||
Translated:The temperature to print when the bed is polypropylene. Set to 0 to disable or 'NC' if Not Compatible.
|
||
|
||
English:The temperature to print when the bed is polypropylene. Set to 0 to disable.
|
||
Translated:The temperature to print when the bed is polypropylene. Set to 0 to disable.
|
||
|
||
English:The temperature to print when the bed is polypropylene. Set to 0 to use default.
|
||
Translated:The temperature to print when the bed is polypropylene. Set to 0 to use default.
|
||
|
||
English:The temperature to print when the bed is using BuildTak. Set to 0 to disable or 'NC' if Not Compatible.
|
||
Translated:The temperature to print when the bed is using BuildTak. Set to 0 to disable or 'NC' if Not Compatible.
|
||
|
||
English:The temperature to print when the bed is using BuildTak. Set to 0 to disable.
|
||
Translated:The temperature to print when the bed is using BuildTak. Set to 0 to disable.
|
||
|
||
English:The temperature to print when the bed is using BuildTak. Set to 0 to use default.
|
||
Translated:The temperature to print when the bed is using BuildTak. Set to 0 to use default.
|
||
|
||
English:The temperature to print when the bed is using garolite. Set to 0 to disable or 'NC' if Not Compatible.
|
||
Translated:The temperature to print when the bed is using garolite. Set to 0 to disable or 'NC' if Not Compatible.
|
||
|
||
English:The temperature to print when the bed is using garolite. Set to 0 to disable.
|
||
Translated:The temperature to print when the bed is using garolite. Set to 0 to disable.
|
||
|
||
English:The temperature to print when the bed is using garolite. Set to 0 to use default.
|
||
Translated:The temperature to print when the bed is using garolite. Set to 0 to use default.
|
||
|
||
English:The temperature to print when the bed is using glass. Set to 0 to disable or 'NC' if Not Compatible.
|
||
Translated:The temperature to print when the bed is using glass. Set to 0 to disable or 'NC' if Not Compatible.
|
||
|
||
English:The temperature to print when the bed is using glass. Set to 0 to disable.
|
||
Translated:The temperature to print when the bed is using glass. Set to 0 to disable.
|
||
|
||
English:The temperature to print when the bed is using glass. Set to 0 to use default.
|
||
Translated:The temperature to print when the bed is using glass. Set to 0 to use default.
|
||
|
||
English:The temperature to print when the bed is using PEI. Set to 0 to disable or 'NC' if Not Compatible.
|
||
Translated:The temperature to print when the bed is using PEI. Set to 0 to disable or 'NC' if Not Compatible.
|
||
|
||
English:The temperature to print when the bed is using PEI. Set to 0 to disable.
|
||
Translated:The temperature to print when the bed is using PEI. Set to 0 to disable.
|
||
|
||
English:The temperature to print when the bed is using PEI. Set to 0 to use default.
|
||
Translated:The temperature to print when the bed is using PEI. Set to 0 to use default.
|
||
|
||
English:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
|
||
Translated:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
|
||
|
||
English:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
|
||
Translated:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
|
||
|
||
English:The temperature to which the nozzle will be heated before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
|
||
Translated:The temperature to which the nozzle will be heated before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
|
||
|
||
English:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
|
||
Translated:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
|
||
|
||
English:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
|
||
Translated:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
|
||
|
||
English:The thickness of each layer of the print, except the base layers. A smaller number will create more layers and more vertical accuracy but also a slower print.
|
||
Translated:The thickness of each layer of the print, except the base layers. A smaller number will create more layers and more vertical accuracy but also a slower print.
|
||
|
||
English:The thickness of each layer of the print, except the first layer. A smaller number will create more layers and more vertical accuracy but also a slower print.
|
||
Translated:The thickness of each layer of the print, except the first layer. A smaller number will create more layers and more vertical accuracy but also a slower print.
|
||
|
||
English:The thickness of the first layer. A first layer taller than the default layer thickness can ensure good adhesion to the build plate.
|
||
Translated:The thickness of the first layer. A first layer taller than the default layer thickness can ensure good adhesion to the build plate.
|
||
|
||
English:The time in seconds to expose the normal layers of the print.
|
||
Translated:The time in seconds to expose the normal layers of the print.
|
||
|
||
English:The time it takes to heat back up from a cool down.
|
||
Translated:The time it takes to heat back up from a cool down.
|
||
|
||
English:The time over which to increase the Extra Length On Restart to its maximum value. Below this time only a portion of the extra length will be applied. Leave 0 to apply the entire amount all the time.
|
||
Translated:The time over which to increase the Extra Length On Restart to its maximum value. Below this time only a portion of the extra length will be applied. Leave 0 to apply the entire amount all the time.
|
||
|
||
English:The time to print this G-Code is estimated to be {0} seconds.\n\nPlease check your part for errors if this is unexpected.
|
||
Translated:The time to print this G-Code is estimated to be {0} seconds.\n\nPlease check your part for errors if this is unexpected.
|
||
|
||
English:The Validation Threshold mush be greater than 0 and less than .5mm.
|
||
Translated:The Validation Threshold mush be greater than 0 and less than .5mm.
|
||
|
||
English:The width and depth of the support pillars
|
||
Translated:The width and depth of the support pillars
|
||
|
||
English:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
|
||
Translated:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
|
||
|
||
English:The X and Y resolution of the print bed in pixels.
|
||
Translated:The X and Y resolution of the print bed in pixels.
|
||
|
||
English:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
|
||
Translated:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
|
||
|
||
English:The Z Offset for your printer, sometimes called Baby Stepping, is greater than 2mm and invalid. Clear the value and re-level the bed.
|
||
Translated:The Z Offset for your printer, sometimes called Baby Stepping, is greater than 2mm and invalid. Clear the value and re-level the bed.
|
||
|
||
English:The z offset to apply to improve the first layer adhesion.
|
||
Translated:The z offset to apply to improve the first layer adhesion.
|
||
|
||
English:Theme
|
||
Translated:Theme
|
||
|
||
English:There is a new update available for download
|
||
Translated:There is a new update available for download
|
||
|
||
English:There is a recommended update available
|
||
Translated:There is a recommended update available
|
||
|
||
English:There is a recommended update available for MatterControl. Would you like to download it now?
|
||
Translated:There is a recommended update available for MatterControl. Would you like to download it now?
|
||
|
||
English:There is a required update available
|
||
Translated:There is a required update available
|
||
|
||
English:Thermal Runaway - Bed
|
||
Translated:Thermal Runaway - Bed
|
||
|
||
English:Thermal Runaway - Hot End
|
||
Translated:Thermal Runaway - Hot End
|
||
|
||
English:Thin Walls
|
||
Translated:Thin Walls
|
||
|
||
English:This code to will provide read-only access.
|
||
Translated:This code to will provide read-only access.
|
||
|
||
English:This data compensates for machine misalignment and bed distortion, and ensures good first layer adhesion.
|
||
Translated:This data compensates for machine misalignment and bed distortion, and ensures good first layer adhesion.
|
||
|
||
English:This data improves the alignment of dual extrusion prints.
|
||
Translated:This data improves the alignment of dual extrusion prints.
|
||
|
||
English:This data is required for print leveling and ensures good first layer adhesion.
|
||
Translated:This data is required for print leveling and ensures good first layer adhesion.
|
||
|
||
English:This data is required for software print leveling and ensures good first layer adhesion.
|
||
Translated:This data is required for software print leveling and ensures good first layer adhesion.
|
||
|
||
English:This is a set of regular expressions to apply to lines after they are received from the printer. They will be applied in order to each line received.
|
||
Translated:This is a set of regular expressions to apply to lines after they are received from the printer. They will be applied in order to each line received.
|
||
|
||
English:This is a set of regular expressions to apply to lines prior to sending to a printer. They will be applied in the order listed before sending. To return more than one instruction separate them with comma.
|
||
Translated:This is a set of regular expressions to apply to lines prior to sending to a printer. They will be applied in the order listed before sending. To return more than one instruction separate them with comma.
|
||
|
||
English:This is the angle that lowers or deploys the z probe.
|
||
Translated:This is the angle that lowers or deploys the z probe.
|
||
|
||
English:This is the angle that raises or stows the z probe.
|
||
Translated:This is the angle that raises or stows the z probe.
|
||
|
||
English:This is the make (often the manufacturer) of printer this profile is targeting.
|
||
Translated:This is the make (often the manufacturer) of printer this profile is targeting.
|
||
|
||
English:This is the MatterHackers sku representing this printer. If the printer is not offered on MatterHackers this can be set to a collection key.
|
||
Translated:This is the MatterHackers sku representing this printer. If the printer is not offered on MatterHackers this can be set to a collection key.
|
||
|
||
English:This is the model of printer this profile is targeting.
|
||
Translated:This is the model of printer this profile is targeting.
|
||
|
||
English:This is the name of your printer that will be displayed in the choose printer menu.
|
||
Translated:This is the name of your printer that will be displayed in the choose printer menu.
|
||
|
||
English:This is used to increase the number of downloads allowed when browsing GitHub repositories
|
||
Translated:This is used to increase the number of downloads allowed when browsing GitHub repositories
|
||
|
||
English:This should be checked if the printer supports multiple bed surfaces and the bed temperature for the different surfaces needs to vary.
|
||
Translated:This should be checked if the printer supports multiple bed surfaces and the bed temperature for the different surfaces needs to vary.
|
||
|
||
English:This should be in 'G-Code'
|
||
Translated:This should be in 'G-Code'
|
||
|
||
English:This should be set to the current bed surfaces of the printer. It is used to select the correct bed temperature for a given material and bed surface combination.
|
||
Translated:This should be set to the current bed surfaces of the printer. It is used to select the correct bed temperature for a given material and bed surface combination.
|
||
|
||
English:This will ensure that filament is able to flow through the nozzle.
|
||
Translated:This will ensure that filament is able to flow through the nozzle.
|
||
|
||
English:This will ensure that no filament is stuck to your nozzle.
|
||
Translated:This will ensure that no filament is stuck to your nozzle.
|
||
|
||
English:This will improve the accuracy of print leveling
|
||
Translated:This will improve the accuracy of print leveling
|
||
|
||
English:This will improve the accuracy of print leveling.
|
||
Translated:This will improve the accuracy of print leveling.
|
||
|
||
English:This will only work on specific hardware. Do not use unless you are sure your printer controller supports this feature
|
||
Translated:This will only work on specific hardware. Do not use unless you are sure your printer controller supports this feature
|
||
|
||
English:This wizard will close to print a calibration part and resume after the print completes.
|
||
Translated:This wizard will close to print a calibration part and resume after the print completes.
|
||
|
||
English:Thread Scale
|
||
Translated:Thread Scale
|
||
|
||
English:Threads
|
||
Translated:Threads
|
||
|
||
English:Threshold
|
||
Translated:Threshold
|
||
|
||
English:Thumbnails
|
||
Translated:Thumbnails
|
||
|
||
English:Time
|
||
Translated:Time
|
||
|
||
English:Time For Extra Length
|
||
Translated:Time For Extra Length
|
||
|
||
English:Time From Start
|
||
Translated:Time From Start
|
||
|
||
English:Time Multiplier
|
||
Translated:Time Multiplier
|
||
|
||
English:Time to End
|
||
Translated:Time to End
|
||
|
||
English:Time to Tool Change
|
||
Translated:Time to Tool Change
|
||
|
||
English:Tip Scale
|
||
Translated:Tip Scale
|
||
|
||
English:Tip Segments
|
||
Translated:Tip Segments
|
||
|
||
English:TM
|
||
Translated:TM
|
||
|
||
English:To apply settings changes you need to restart MatterControl.
|
||
Translated:To apply settings changes you need to restart MatterControl.
|
||
|
||
English:To complete the next few steps you will need
|
||
Translated:To complete the next few steps you will need
|
||
|
||
English:To finish changing your monitor settings you need to restart MatterControl. If after changing your fonts are too small you can adjust Text Size.
|
||
Translated:To finish changing your monitor settings you need to restart MatterControl. If after changing your fonts are too small you can adjust Text Size.
|
||
|
||
English:To Folder
|
||
Translated:To Folder
|
||
|
||
English:Toggle Selection
|
||
Translated:Toggle Selection
|
||
|
||
English:Took Too Long To Heat
|
||
Translated:Took Too Long To Heat
|
||
|
||
English:Tool
|
||
Translated:Tool
|
||
|
||
English:Tool Bar Options
|
||
Translated:Tool Bar Options
|
||
|
||
English:Tools
|
||
Translated:Tools
|
||
|
||
English:Tooth Count
|
||
Translated:Tooth Count
|
||
|
||
English:Top Inset
|
||
Translated:Top Inset
|
||
|
||
English:Top Solid Infill
|
||
Translated:Top Solid Infill
|
||
|
||
English:Top Solid Layers
|
||
Translated:Top Solid Layers
|
||
|
||
English:Torus
|
||
Translated:Torus
|
||
|
||
English:Total Time Printed
|
||
Translated:Total Time Printed
|
||
|
||
English:Touch Screen Mode
|
||
Translated:Touch Screen Mode
|
||
|
||
English:Transform
|
||
Translated:Transform
|
||
|
||
English:Transform Wrapper
|
||
Translated:Transform Wrapper
|
||
|
||
English:Translate
|
||
Translated:Translate
|
||
|
||
English:Translation
|
||
Translated:Translation
|
||
|
||
English:Transparent
|
||
Translated:Transparent
|
||
|
||
English:Trapezoid
|
||
Translated:Trapezoid
|
||
|
||
English:Travel
|
||
Translated:Travel
|
||
|
||
English:Triangle
|
||
Translated:Triangle
|
||
|
||
English:TRIANGLES
|
||
Translated:TRIANGLES
|
||
|
||
English:Trim Filament
|
||
Translated:Trim Filament
|
||
|
||
English:Trim Filament Page
|
||
Translated:Trim Filament Page
|
||
|
||
English:Troubleshoot
|
||
Translated:Troubleshoot
|
||
|
||
English:Troubleshooting
|
||
Translated:Troubleshooting
|
||
|
||
English:Try to connect mesh edges when the actual mesh data is not all the way connected.
|
||
Translated:Try to connect mesh edges when the actual mesh data is not all the way connected.
|
||
|
||
English:Tuning Adjustment
|
||
Translated:Tuning Adjustment
|
||
|
||
English:Turn off motor current at end of print or after cancel print.
|
||
Translated:Turn off motor current at end of print or after cancel print.
|
||
|
||
English:Turn on if Below
|
||
Translated:Turn on if Below
|
||
|
||
English:Turn retractions on and off.
|
||
Translated:Turn retractions on and off.
|
||
|
||
English:Turn the fan on and off regardless of settings.
|
||
Translated:Turn the fan on and off regardless of settings.
|
||
|
||
English:Turns on and off all cooling settings (all settings below this one).
|
||
Translated:Turns on and off all cooling settings (all settings below this one).
|
||
|
||
English:Turntable Mode
|
||
Translated:Turntable Mode
|
||
|
||
English:Twist
|
||
Translated:Twist
|
||
|
||
English:Twist Right
|
||
Translated:Twist Right
|
||
|
||
English:Type 'Esc' to cancel
|
||
Translated:Type 'Esc' to cancel
|
||
|
||
English:Uh oh! Passwords do not match.
|
||
Translated:Uh oh! Passwords do not match.
|
||
|
||
English:Uh-oh! Could not connect to printer.
|
||
Translated:Uh-oh! Could not connect to printer.
|
||
|
||
English:Unable due to hardware leveling
|
||
Translated:Unable due to hardware leveling
|
||
|
||
English:Unable to Connect
|
||
Translated:Unable to Connect
|
||
|
||
English:Unable to connect to server
|
||
Translated:Unable to connect to server
|
||
|
||
English:Unable to Import
|
||
Translated:Unable to Import
|
||
|
||
English:Undo
|
||
Translated:Undo
|
||
|
||
English:Unexpected error validating settings
|
||
Translated:Unexpected error validating settings
|
||
|
||
English:Unexpected response
|
||
Translated:Unexpected response
|
||
|
||
English:Ungroup
|
||
Translated:Ungroup
|
||
|
||
English:Unknown
|
||
Translated:Unknown
|
||
|
||
English:Unknown Reason
|
||
Translated:Unknown Reason
|
||
|
||
English:Unload
|
||
Translated:Unload
|
||
|
||
English:Unload filament
|
||
Translated:Unload filament
|
||
|
||
English:Unload Filament
|
||
Translated:Unload Filament
|
||
|
||
English:Unload Filament Length
|
||
Translated:Unload Filament Length
|
||
|
||
English:Unload Material
|
||
Translated:Unload Material
|
||
|
||
English:Unloading Filament
|
||
Translated:Unloading Filament
|
||
|
||
English:Unlock
|
||
Translated:Unlock
|
||
|
||
English:Unpin
|
||
Translated:Unpin
|
||
|
||
English:Unplug printer USB cable from computer
|
||
Translated:Unplug printer USB cable from computer
|
||
|
||
English:Unsupported Baud Rate
|
||
Translated:Unsupported Baud Rate
|
||
|
||
English:Up
|
||
Translated:Up
|
||
|
||
English:Up Arrow
|
||
Translated:Up Arrow
|
||
|
||
English:Update
|
||
Translated:Update
|
||
|
||
English:Update Available
|
||
Translated:Update Available
|
||
|
||
English:Update Channel
|
||
Translated:Update Channel
|
||
|
||
English:Update In Progress: {0}
|
||
Translated:Update In Progress: {0}
|
||
|
||
English:Update my password
|
||
Translated:Update my password
|
||
|
||
English:Update Setting
|
||
Translated:Update Setting
|
||
|
||
English:Update Settings
|
||
Translated:Update Settings
|
||
|
||
English:Update Settings...
|
||
Translated:Update Settings...
|
||
|
||
English:Updating firmware...
|
||
Translated:Updating firmware...
|
||
|
||
English:Upgrade
|
||
Translated:Upgrade
|
||
|
||
English:Upgrade to Pro
|
||
Translated:Upgrade to Pro
|
||
|
||
English:Upload
|
||
Translated:Upload
|
||
|
||
English:Uploading
|
||
Translated:Uploading
|
||
|
||
English:Uploading...
|
||
Translated:Uploading...
|
||
|
||
English:Use Automatic Z Probe
|
||
Translated:Use Automatic Z Probe
|
||
|
||
English:Use cursor keys for axis movements
|
||
Translated:Use cursor keys for axis movements
|
||
|
||
English:Use Firmware Retraction
|
||
Translated:Use Firmware Retraction
|
||
|
||
English:Use G0
|
||
Translated:Use G0
|
||
|
||
English:Use G0 for moves rather than G1.
|
||
Translated:Use G0 for moves rather than G1.
|
||
|
||
English:Use Grade 2
|
||
Translated:Use Grade 2
|
||
|
||
English:Use Percentage
|
||
Translated:Use Percentage
|
||
|
||
English:Use Relative E Distances
|
||
Translated:Use Relative E Distances
|
||
|
||
English:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
|
||
Translated:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
|
||
|
||
English:Used to specify if more than one extruder share a common heater cartridge.
|
||
Translated:Used to specify if more than one extruder share a common heater cartridge.
|
||
|
||
English:User Control
|
||
Translated:User Control
|
||
|
||
English:User Error
|
||
Translated:User Error
|
||
|
||
English:Username
|
||
Translated:Username
|
||
|
||
English:Username or Email
|
||
Translated:Username or Email
|
||
|
||
English:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
|
||
Translated:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
|
||
|
||
English:Using the above controls
|
||
Translated:Using the above controls
|
||
|
||
English:Utilize High Res Monitors
|
||
Translated:Utilize High Res Monitors
|
||
|
||
English:Validate After Clear
|
||
Translated:Validate After Clear
|
||
|
||
English:Validate Calibration Before Printing
|
||
Translated:Validate Calibration Before Printing
|
||
|
||
English:Validate G Code
|
||
Translated:Validate G Code
|
||
|
||
English:Validate Layer Height
|
||
Translated:Validate Layer Height
|
||
|
||
English:Validate Probe Offset Automatically
|
||
Translated:Validate Probe Offset Automatically
|
||
|
||
English:Validating Z Offset
|
||
Translated:Validating Z Offset
|
||
|
||
English:Validation Error
|
||
Translated:Validation Error
|
||
|
||
English:Validation Threshold
|
||
Translated:Validation Threshold
|
||
|
||
English:Value
|
||
Translated:Value
|
||
|
||
English:Variable Sheet
|
||
Translated:Variable Sheet
|
||
|
||
English:Velocity Paint
|
||
Translated:Velocity Paint
|
||
|
||
English:Version
|
||
Translated:Version
|
||
|
||
English:View Icons
|
||
Translated:View Icons
|
||
|
||
English:View Just My Settings
|
||
Translated:View Just My Settings
|
||
|
||
English:View Large Icons
|
||
Translated:View Large Icons
|
||
|
||
English:View List
|
||
Translated:View List
|
||
|
||
English:View Mode = Materials
|
||
Translated:View Mode = Materials
|
||
|
||
English:View Mode = Non-Manifold
|
||
Translated:View Mode = Non-Manifold
|
||
|
||
English:View Mode = Outlines
|
||
Translated:View Mode = Outlines
|
||
|
||
English:View Mode = Overhangs
|
||
Translated:View Mode = Overhangs
|
||
|
||
English:View Mode = Polygons
|
||
Translated:View Mode = Polygons
|
||
|
||
English:View Mode = Shaded
|
||
Translated:View Mode = Shaded
|
||
|
||
English:View Settings
|
||
Translated:View Settings
|
||
|
||
English:View Small Icons
|
||
Translated:View Small Icons
|
||
|
||
English:View XSmall Icons
|
||
Translated:View XSmall Icons
|
||
|
||
English:Visit MatterHackers.com to Purchase
|
||
Translated:Visit MatterHackers.com to Purchase
|
||
|
||
English:Wait For Running Clean
|
||
Translated:Wait For Running Clean
|
||
|
||
English:'Wait' Responses
|
||
Translated:'Wait' Responses
|
||
|
||
English:Waiting For Bed To Heat
|
||
Translated:Waiting For Bed To Heat
|
||
|
||
English:Waiting for Bed to Heat to
|
||
Translated:Waiting for Bed to Heat to
|
||
|
||
English:Waiting for Extruder 1 to Heat to
|
||
Translated:Waiting for Extruder 1 to Heat to
|
||
|
||
English:Waiting for Extruder 2 to Heat to
|
||
Translated:Waiting for Extruder 2 to Heat to
|
||
|
||
English:Waiting for hotend {0} to heat to
|
||
Translated:Waiting for hotend {0} to heat to
|
||
|
||
English:Waiting For Printer To Heat
|
||
Translated:Waiting For Printer To Heat
|
||
|
||
English:Waiting for the bed to heat to
|
||
Translated:Waiting for the bed to heat to
|
||
|
||
English:Waiting for the bed to heat to {0} °C\nand the hotend to heat to {1} °C.\n\nThis will improve the accuracy of print leveling\nand ensure that no filament is stuck to your nozzle.\n\nWarning! The tip of the nozzle will be HOT!\nAvoid contact with your skin.
|
||
Translated:Waiting for the bed to heat to {0} °C\nand the hotend to heat to {1} °C.\n\nThis will improve the accuracy of print leveling\nand ensure that no filament is stuck to your nozzle.\n\nWarning! The tip of the nozzle will be HOT!\nAvoid contact with your skin.
|
||
|
||
English:Waiting for the bed to heat to {0} °C.\nThis will improve the accuracy of print leveling.
|
||
Translated:Waiting for the bed to heat to {0} °C.\nThis will improve the accuracy of print leveling.
|
||
|
||
English:Waiting for the hotend to heat to
|
||
Translated:Waiting for the hotend to heat to
|
||
|
||
English:Waiting for the hotend to heat to {0} °C.\nThis will ensure that no filament is stuck to your nozzle.\n\nWarning! The tip of the nozzle will be HOT!\nAvoid contact with your skin.
|
||
Translated:Waiting for the hotend to heat to {0} °C.\nThis will ensure that no filament is stuck to your nozzle.\n\nWarning! The tip of the nozzle will be HOT!\nAvoid contact with your skin.
|
||
|
||
English:Waiting for the hotends to heat up.
|
||
Translated:Waiting for the hotends to heat up.
|
||
|
||
English:Warm up Time
|
||
Translated:Warm up Time
|
||
|
||
English:Warning
|
||
Translated:Warning
|
||
|
||
English:Warning - GCode file
|
||
Translated:Warning - GCode file
|
||
|
||
English:Warning - No EEProm Mapping
|
||
Translated:Warning - No EEProm Mapping
|
||
|
||
English:Warning! The tip of the nozzle will be HOT!
|
||
Translated:Warning! The tip of the nozzle will be HOT!
|
||
|
||
English:Warning, very short print
|
||
Translated:Warning, very short print
|
||
|
||
English:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
|
||
Translated:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
|
||
|
||
English:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
|
||
Translated:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
|
||
|
||
English:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
|
||
Translated:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
|
||
|
||
English:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
|
||
Translated:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
|
||
|
||
English:WARNING: Write Failed!
|
||
Translated:WARNING: Write Failed!
|
||
|
||
English:Warping
|
||
Translated:Warping
|
||
|
||
English:We will now finalize our measurement of the extruder height at this position.
|
||
Translated:We will now finalize our measurement of the extruder height at this position.
|
||
|
||
English:We will now measure the probe offset from the top of a printed calibration object.
|
||
Translated:We will now measure the probe offset from the top of a printed calibration object.
|
||
|
||
English:We will now refine our measurement of the extruder height at this position.
|
||
Translated:We will now refine our measurement of the extruder height at this position.
|
||
|
||
English:We will now sample the top of the part.
|
||
Translated:We will now sample the top of the part.
|
||
|
||
English:We will use this paper to measure the distance between the nozzle and the bed.
|
||
Translated:We will use this paper to measure the distance between the nozzle and the bed.
|
||
|
||
English:Wedge
|
||
Translated:Wedge
|
||
|
||
English:Welcome to MatterControl
|
||
Translated:Welcome to MatterControl
|
||
|
||
English:Welcome to MatterControl! What would you like to do today?
|
||
Translated:Welcome to MatterControl! What would you like to do today?
|
||
|
||
English:Weld Edges
|
||
Translated:Weld Edges
|
||
|
||
English:Weld Tolerance
|
||
Translated:Weld Tolerance
|
||
|
||
English:Weld Vertices
|
||
Translated:Weld Vertices
|
||
|
||
English:What to do when there is not a good place to hide the seam.
|
||
Translated:What to do when there is not a good place to hide the seam.
|
||
|
||
English:What was my password again?
|
||
Translated:What was my password again?
|
||
|
||
English:What went wrong?
|
||
Translated:What went wrong?
|
||
|
||
English:What's this?
|
||
Translated:What's this?
|
||
|
||
English:wheel
|
||
Translated:wheel
|
||
|
||
English:When filling bottom and top solid layers always create them so that each new print segment side is touching a previous segment on the same side.
|
||
Translated:When filling bottom and top solid layers always create them so that each new print segment side is touching a previous segment on the same side.
|
||
|
||
English:When generating per layer support, evaluate all surfaces rather than only those above the bed.
|
||
Translated:When generating per layer support, evaluate all surfaces rather than only those above the bed.
|
||
|
||
English:When this is checked MatterControl will attempt to recover a print in the event of a failure, such as lost connection or lost power.
|
||
Translated:When this is checked MatterControl will attempt to recover a print in the event of a failure, such as lost connection or lost power.
|
||
|
||
English:When upgrading to new firmware, first save a backup of the current firmware.
|
||
Translated:When upgrading to new firmware, first save a backup of the current firmware.
|
||
|
||
English:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
|
||
Translated:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
|
||
|
||
English:Width
|
||
Translated:Width
|
||
|
||
English:Width Percent
|
||
Translated:Width Percent
|
||
|
||
English:Wifi Setup
|
||
Translated:Wifi Setup
|
||
|
||
English:Will be updated to:
|
||
Translated:Will be updated to:
|
||
|
||
English:Wipe Shield Distance
|
||
Translated:Wipe Shield Distance
|
||
|
||
English:Wipe Tower
|
||
Translated:Wipe Tower
|
||
|
||
English:Wipe Tower Size
|
||
Translated:Wipe Tower Size
|
||
|
||
English:Wizard
|
||
Translated:Wizard
|
||
|
||
English:Wolud you like to save changes before closing?
|
||
Translated:Wolud you like to save changes before closing?
|
||
|
||
English:Would you like to save changes before closing?
|
||
Translated:Would you like to save changes before closing?
|
||
|
||
English:Would you like to setup Wifi?
|
||
Translated:Would you like to setup Wifi?
|
||
|
||
English:Wouldn’t Slice Correctly
|
||
Translated:Wouldn’t Slice Correctly
|
||
|
||
English:Write Filter
|
||
Translated:Write Filter
|
||
|
||
English:Writing G-Code
|
||
Translated:Writing G-Code
|
||
|
||
English:X and Y Distance
|
||
Translated:X and Y Distance
|
||
|
||
English:X Intercept
|
||
Translated:X Intercept
|
||
|
||
English:X Offset
|
||
Translated:X Offset
|
||
|
||
English:X Options
|
||
Translated:X Options
|
||
|
||
English:X Y Nozzle Offsets Have Been Calibrated
|
||
Translated:X Y Nozzle Offsets Have Been Calibrated
|
||
|
||
English:XY Calibration
|
||
Translated:XY Calibration
|
||
|
||
English:XY Homing Position
|
||
Translated:XY Homing Position
|
||
|
||
English:Y Intercept
|
||
Translated:Y Intercept
|
||
|
||
English:Y Offset
|
||
Translated:Y Offset
|
||
|
||
English:Y Options
|
||
Translated:Y Options
|
||
|
||
English:Yes
|
||
Translated:Yes
|
||
|
||
English:You are connected to the Emulator not an actual printer.
|
||
Translated:You are connected to the Emulator not an actual printer.
|
||
|
||
English:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
|
||
Translated:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
|
||
|
||
English:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
|
||
Translated:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
|
||
|
||
English:You can also
|
||
Translated:You can also
|
||
|
||
English:You can also share items with friends, navigate to your Cloud Library Folder and select 'Share' on items you have added.
|
||
Translated:You can also share items with friends, navigate to your Cloud Library Folder and select 'Share' on items you have added.
|
||
|
||
English:You can continue to ultra fine calibration, but for most uses this is not necessary.
|
||
Translated:You can continue to ultra fine calibration, but for most uses this is not necessary.
|
||
|
||
English:You can only connect when not currently connected
|
||
Translated:You can only connect when not currently connected
|
||
|
||
English:You have {0} unsave design(s). Wolud you like to save changes before closing?
|
||
Translated:You have {0} unsave design(s). Wolud you like to save changes before closing?
|
||
|
||
English:You have {0} unsave designs. Wolud you like to save changes before closing?
|
||
Translated:You have {0} unsave designs. Wolud you like to save changes before closing?
|
||
|
||
English:You have one unsave design ({0}). Wolud you like to save changes before closing?
|
||
Translated:You have one unsave design ({0}). Wolud you like to save changes before closing?
|
||
|
||
English:You have successfully imported a new {0} setting. You can find '{1}' in your list of {0} settings.
|
||
Translated:You have successfully imported a new {0} setting. You can find '{1}' in your list of {0} settings.
|
||
|
||
English:You have successfully imported a new printer profile. You can find '{0}' in your list of available printers.
|
||
Translated:You have successfully imported a new printer profile. You can find '{0}' in your list of available printers.
|
||
|
||
English:You may need to wait a minute for your printer to finish initializing.
|
||
Translated:You may need to wait a minute for your printer to finish initializing.
|
||
|
||
English:You need to select your printer's 'Bed Surface' under the bed setting menu on the top right of your screen
|
||
Translated:You need to select your printer's 'Bed Surface' under the bed setting menu on the top right of your screen
|
||
|
||
English:You need to select your printer's 'Bed Surface' under the 'Bed Temperature' menu on the top right of your screen
|
||
Translated:You need to select your printer's 'Bed Surface' under the 'Bed Temperature' menu on the top right of your screen
|
||
|
||
English:You need to select your printer's 'Bed Surface' under the 'Bed Temperature' menu on the top right of your screen.
|
||
Translated:You need to select your printer's 'Bed Surface' under the 'Bed Temperature' menu on the top right of your screen.
|
||
|
||
English:You should have at least 3 top layers for this calibration to measure off of.
|
||
Translated:You should have at least 3 top layers for this calibration to measure off of.
|
||
|
||
English:You should select the 'Material' your are printing with under the 'Hotend Temperature' menu on the top right of your screen
|
||
Translated:You should select the 'Material' your are printing with under the 'Hotend Temperature' menu on the top right of your screen
|
||
|
||
English:You should select the 'Material' your are printing with under the 'Hotend Temperature' menu on the top right of your screen.
|
||
Translated:You should select the 'Material' your are printing with under the 'Hotend Temperature' menu on the top right of your screen.
|
||
|
||
English:Your 3D print has been auto-paused.\n\nLayer {0} reached.
|
||
Translated:Your 3D print has been auto-paused.\n\nLayer {0} reached.
|
||
|
||
English:Your 3D print has been auto-paused.\n\nLayer {0} reached.
|
||
Translated:Your 3D print has been auto-paused.\n\nLayer {0} reached.
|
||
|
||
English:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.
|
||
Translated:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.
|
||
|
||
English:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.
|
||
Translated:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.
|
||
|
||
English:Your application is up-to-date
|
||
Translated:Your application is up-to-date
|
||
|
||
English:Your code has been redeemed. Please check your 'Shared With Me' folder in your Library.
|
||
Translated:Your code has been redeemed. Please check your 'Shared With Me' folder in your Library.
|
||
|
||
English:Your Email Address
|
||
Translated:Your Email Address
|
||
|
||
English:Your invite has been sent!
|
||
Translated:Your invite has been sent!
|
||
|
||
English:Your nozzles should now be calibrated.
|
||
Translated:Your nozzles should now be calibrated.
|
||
|
||
English:Your Phone Number
|
||
Translated:Your Phone Number
|
||
|
||
English:Your printer has been adjusted but we should run calibrating again to improve accuracy.
|
||
Translated:Your printer has been adjusted but we should run calibrating again to improve accuracy.
|
||
|
||
English:Your printer is reporting a HARDWARE ERROR and has been paused. Check the error and cancel the print if required.
|
||
Translated:Your printer is reporting a HARDWARE ERROR and has been paused. Check the error and cancel the print if required.
|
||
|
||
English:Your printer's 'Bed Surface' should be selected under the bed setting menu on the top right of your screen
|
||
Translated:Your printer's 'Bed Surface' should be selected under the bed setting menu on the top right of your screen
|
||
|
||
English:Your probe is now finely calibrated and should produce excellent first layer results
|
||
Translated:Your probe is now finely calibrated and should produce excellent first layer results
|
||
|
||
English:Your Share Code
|
||
Translated:Your Share Code
|
||
|
||
English:Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
|
||
Translated:Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
|
||
|
||
English:Your Start G-Code should not contain a G29 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
|
||
Translated:Your Start G-Code should not contain a G29 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
|
||
|
||
English:Your Start G-Code should not contain a G30 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
|
||
Translated:Your Start G-Code should not contain a G30 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.
|
||
|
||
English:Your Start G-Code should not contain a G30 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
|
||
Translated:Your Start G-Code should not contain a G30 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.
|
||
|
||
English:Z Calibration
|
||
Translated:Z Calibration
|
||
|
||
English:Z Calibration measures the z position of the nozzle.
|
||
Translated:Z Calibration measures the z position of the nozzle.
|
||
|
||
English:Z Calibration measures the z position of the nozzles.
|
||
Translated:Z Calibration measures the z position of the nozzles.
|
||
|
||
English:Z Lift
|
||
Translated:Z Lift
|
||
|
||
English:Z Offset
|
||
Translated:Z Offset
|
||
|
||
English:Z Offset is too large.
|
||
Translated:Z Offset is too large.
|
||
|
||
English:Z Options
|
||
Translated:Z Options
|
||
|
||
English:ZIP File
|
||
Translated:ZIP File
|
||
|
||
English:Zoom
|
||
Translated:Zoom
|
||
|
||
English:Zoom in
|
||
Translated:Zoom in
|
||
|
||
English:Zoom out
|
||
Translated:Zoom out
|
||
|
||
English:Zoom to fit
|
||
Translated:Zoom to fit
|
||
|
||
English:Zoom to selection
|
||
Translated:Zoom to selection
|
||
|
||
English:Zoom to Selection
|
||
Translated:Zoom to Selection
|
||
|
||
English:Zoom to window
|
||
Translated:Zoom to window
|
||
|
||
English:Zoom View
|
||
Translated:Zoom View
|
||
|
||
English:Zoom: Mouse Wheel | Ctrl + Alt + Left Mouse Button
|
||
Translated:Zoom: Mouse Wheel | Ctrl + Alt + Left Mouse Button
|
||
|
||
English:Zoom: Mouse Wheel | Ctrl + Alt + Left Mouse Button | Ctrl + '+' & Ctrl + '-'
|
||
Translated:Zoom: Mouse Wheel | Ctrl + Alt + Left Mouse Button | Ctrl + '+' & Ctrl + '-'
|
||
|
||
English:Zoom: Mouse Wheel, Ctrl + Alt + Left Mouse Button, Ctrl + '+' & Ctrl + '-'
|
||
Translated:Zoom: Mouse Wheel, Ctrl + Alt + Left Mouse Button, Ctrl + '+' & Ctrl + '-'
|
||
|