nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

fixing typo

Browse source
This commit is contained in:
Lars Brubaker 2022-06-13 09:16:50 -07:00
parent d2d0c3e880
commit ae80f25b83
3 changed files with 80 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

2
MatterControlLib/ConfigurationPage/PrintLeveling/WizardPages/CalibrateProbeRemovePaperInstructions.cs
View file

@ -122,7 +122,7 @@ namespace MatterHackers.MatterControl.ConfigurationPage.PrintLeveling
completedText += "\n\n • " + "Remove the bed from the printer so the nozzle can get low enough to touch the pad".Localize();
}
completedText += "\n • " + "Ensure the nozzle is clear of any debri or filament".Localize();
completedText += "\n • " + "Ensure the nozzle is clear of any debris or filament".Localize();
completedText += "\n\n" + "Click 'Next' to continue.".Localize();
contentRow.AddChild(this.CreateTextField(completedText));

78
StaticData/Translations/Master.txt
View file

@ -31,6 +31,15 @@ Translated:%
English:(Press 'Skip' to setup connection later)
Translated:(Press 'Skip' to setup connection later)
English:\"{0}\" already exists.\nDo you want to replace it?
Translated:\"{0}\" already exists.\nDo you want to replace it?
English:\nBelow you can find a list of each setting that has changed.
Translated:\nBelow you can find a list of each setting that has changed.
English:\nUpdating a default setting will not change any override that you have applied.
Translated:\nUpdating a default setting will not change any override that you have applied.
English:{0} (Update Available)
Translated:{0} (Update Available)
@ -391,6 +400,9 @@ Translated:Are you sure you want to delete printer '{0}'?
English:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
Translated:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
English:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
Translated:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
English:Are you sure you want to remove the currently selected items?
Translated:Are you sure you want to remove the currently selected items?
@ -1579,6 +1591,9 @@ Translated:Error: Could not create file for saving. Original error
English:Error: Could not read file from disk. Original error:
Translated:Error: Could not read file from disk. Original error:
English:Error: Could not read file from disk. Original error:
Translated:Error: Could not read file from disk. Original error:
English:Estimated Cost
Translated:Estimated Cost
@ -1597,6 +1612,9 @@ Translated:Exit while printing
English:Expand
Translated:Expand
English:Expand All
Translated:Expand All
English:Expand Distance
Translated:Expand Distance
@ -1951,6 +1969,9 @@ Translated:Forums
English:Found a line that is {0} characters long.\n{1}...
Translated:Found a line that is {0} characters long.\n{1}...
English:Found a line that is {0} characters long.\n{1}...
Translated:Found a line that is {0} characters long.\n{1}...
English:Furthest Back
Translated:Furthest Back
@ -2074,6 +2095,9 @@ Translated:GRID
English:Group
Translated:Group
English:Group Setings
Translated:Group Setings
English:Guides and Articles
Translated:Guides and Articles
@ -2173,6 +2197,9 @@ Translated:HEXAGON
English:Hide
Translated:Hide
English:Hide All
Translated:Hide All
English:High Precision
Translated:High Precision
@ -2437,6 +2464,9 @@ Translated:IP Finder
English:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
Translated:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
English:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
Translated:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
English:It is currently set to {0}.
Translated:It is currently set to {0}.
@ -3868,6 +3898,9 @@ Translated:Quality
English:Quality Setting
Translated:Quality Setting
English:Queue
Translated:Queue
English:Radial Array
Translated:Radial Array
@ -4075,6 +4108,9 @@ Translated:Reset View
English:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
Translated:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
English:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
Translated:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
English:Reshape
Translated:Reshape
@ -4369,6 +4405,9 @@ Translated:Select a new Destination
English:Select a printer to continue
Translated:Select a printer to continue
English:Select all
Translated:Select all
English:Select All
Translated:Select All
@ -4909,6 +4948,12 @@ Translated:Success!\n\nYour filament should now be loaded
English:Success!\n\nYour filament should now be unloaded
Translated:Success!\n\nYour filament should now be unloaded
English:Success!\n\nYour filament should now be loaded
Translated:Success!\n\nYour filament should now be loaded
English:Success!\n\nYour filament should now be unloaded
Translated:Success!\n\nYour filament should now be unloaded
English:Support
Translated:Support
@ -5134,6 +5179,9 @@ Translated:The extra distance the raft will extend around the edge of the part.
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
English:The extruder to use for support material. Default will use whichever extruder active at the time.
Translated:The extruder to use for support material. Default will use whichever extruder active at the time.
@ -5149,6 +5197,9 @@ Translated:The extruder to use to print the raft. Default will use extruder 1.
English:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
English:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nIt is recommended that you only print Gcode files known to match your printer's configuration.\n\nAre you sure you want to print this GCode file?
English:The firmware being used by the printer. Allows for improvements based on firmware such as optimized G-Code output.
Translated:The firmware being used by the printer. Allows for improvements based on firmware such as optimized G-Code output.
@ -5170,6 +5221,9 @@ Translated:The ideal resistance is when the paper first begins to bend, but can
English:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
Translated:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
English:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
Translated:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
English:The inset amount for nozzle 1 from the bed (Left, Front, Right, Back).
Translated:The inset amount for nozzle 1 from the bed (Left, Front, Right, Back).
@ -5188,6 +5242,9 @@ Translated:The layer(s) at which the print will pause, allowing for a change in
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\".
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\".
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\". Rafts layers are not considered. The 1st pause layer is the first above the raft.
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: \"16; 37\". Rafts layers are not considered. The 1st pause layer is the first above the raft.
English:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
Translated:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
@ -5416,6 +5473,9 @@ Translated:The serial port communication speed of the printers firmware.
English:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
Translated:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
English:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
Translated:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
English:The serial port to use while connecting to this printer.
Translated:The serial port to use while connecting to this printer.
@ -5575,6 +5635,9 @@ Translated:The temperature to which the nozzle will be heated before printing th
English:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
Translated:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
English:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
Translated:The term 'Baud Rate' roughly means the speed at which\ndata is transmitted. Baud rates may differ from printer to\nprinter. Refer to your printer manual for more info.\n\nTip: If you are uncertain - try 250000.
English:The thickness of each layer of the print, except the base layers. A smaller number will create more layers and more vertical accuracy but also a slower print.
Translated:The thickness of each layer of the print, except the base layers. A smaller number will create more layers and more vertical accuracy but also a slower print.
@ -6175,6 +6238,12 @@ Translated:Warning, very short print
English:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
Translated:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
English:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
Translated:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
English:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
Translated:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
English:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
Translated:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
@ -6328,6 +6397,9 @@ Translated:You are connected to the Emulator not an actual printer.
English:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
Translated:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
English:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
Translated:You are switching to a different thumbnail rendering mode. If you want, your current thumbnails can be removed and recreated in the new style. You can switch back and forth at any time. There will be some processing overhead while the new thumbnails are created.\n\nDo you want to rebuild your existing thumbnails now?
English:You can also
Translated:You can also
@ -6379,6 +6451,12 @@ Translated:You should select the 'Material' your are printing with under the 'Ho
English:Your 3D print has been auto-paused.\n\nLayer {0} reached.
Translated:Your 3D print has been auto-paused.\n\nLayer {0} reached.
English:Your 3D print has been auto-paused.\n\nLayer {0} reached.
Translated:Your 3D print has been auto-paused.\n\nLayer {0} reached.
English:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.
Translated:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.
English:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.
Translated:Your 3D print has been paused.\n\nOut of filament, or jam, detected. Please load more filament or clear the jam.

2
Submodules/agg-sharp

@ -1 +1 @@
Subproject commit 65fbb95b6db2b3c219fee177c7c45b22b36b9f24
Subproject commit 27c7b679c14a5f96ccd7f1684d4b45d9791d0834