nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge pull request #301 from gregory-diaz/1.2.3

Browse source 
Added new printer profiles for 3D Stuffmaker
This commit is contained in:
Lars Brubaker 2015-06-16 18:11:52 -07:00
commit 4eca25cc54
62 changed files with 466 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

1
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/calibration.ini Normal file
View file

@ -0,0 +1 @@
Calibration - Box.stl

152
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/config.ini Normal file
View file

@ -0,0 +1,152 @@
avoid_crossing_perimeters = 1
bed_shape = rectangular
bed_size = 310,310
bed_temperature = 0
bottom_clip_amount = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 0.8
bridge_speed = 27
brim_width = 0.5
build_height = 260
cancel_gcode = G91 ; Set distance mode to relative value mode\nG1 Z5 F5000 ; lift nozzle\nG1 E-10 F500 ; Retract Extruder\nG90;\nG28 X0; Home X axis\nG1 Y225 F3000; bring plate to front\nM84;
center_part_on_bed = 1
complete_objects = 1
cool_extruder_lift = 0
cooling = 1
create_raft = 1
default_acceleration = 0
disable_fan_first_layers = 1
end_gcode = M104 S0 ; turn off temperature\nG91 ; Set distance mode to relative value mode\nG1 Z5 F5000 ; lift nozzle\nG1 E-10 F500 ; Retract Extruder\nG90;\nG28 X0 ; home X axis\nG1 Y225 F3000; bring plate to front\nM84;
external_perimeter_speed = 40
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 35
extruder_clearance_radius = 40
extruder_count = 1
extruder_offset = 0x0
extruders_share_temperature = 0
extrusion_axis = E
extrusion_multiplier = 1.0
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.74
fill_angle = 45
fill_density = 0.2
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_extrusion_width = 100%
first_layer_height = 0.25
first_layer_speed = 25
first_layer_temperature = 205
g0 = 0
gap_fill_speed = 15
gcode_arcs = 0
gcode_comments = 1
gcode_flavor = reprap
gcode_output_type = REPRAP
has_fan = 1
has_hardware_leveling = 0
has_heated_bed = 0
has_sd_card_reader = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 1
infill_overlap_perimeter = .06
infill_speed = 40
infill_type = LINES
layer_gcode =
layer_height = 0.25
max_fan_speed = 100
min_extrusion_before_retract = 0.1
min_fan_speed = 50
min_print_speed = 10
min_skirt_length = 2
notes =
nozzle_diameter = 0.7
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
pause_gcode = G1 X0 Y0 F3000; home all axes\nM84 S0
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 40
perimeters = 2
post_process =
print_center = 150,150
raft_air_gap = 0.3
raft_extruder = 0
raft_extra_distance_around_part = 3
raft_fan_speed_percent = 50
raft_layers = 0
raft_print_speed = 25
randomize_start = 1
repair_outlines_extensive_stitching = 1
repair_outlines_keep_open = 0
resolution = 0
resume_gcode =
retract_before_travel = 3
retract_layer_change = 0
retract_length = 1
retract_length_tool_change = 10
retract_lift = 0.0125
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 25
skirt_distance = 0.7
skirt_height = 2
skirts = 3
slowdown_below_layer_time = 10
small_perimeter_speed = 10
solid_fill_pattern = concentric
solid_infill_below_area = 70
solid_infill_every_layers = 20
solid_infill_extrusion_width = 0
solid_infill_speed = 90%
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 X0 Y0 ; home all axes\nM109 S[temperature]\nG28 Y0 Z0\nG91
start_perimeters_at_concave_points = 1
start_perimeters_at_non_overhang = 1
support_material = 0
support_material_angle = 45
support_material_create_internal_support = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_infill_angle = 45
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_spacing = 0
support_material_pattern = honeycomb
support_material_spacing = 2.5
support_material_speed = 25
support_material_threshold = 25
support_material_xy_distance = 0.8
support_material_z_distance = 0.15
support_material_z_gap_layers = 4
support_type = LINES
temperature = 205
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 35
top_solid_layers = 4
travel_speed = 90
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 1
wipe_shield_distance = 0
wipe_tower_size = 0
z_can_be_negative = 0
z_offset = 0

2
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Black.slice Normal file
View file

@ -0,0 +1,2 @@
temperature = 205
first_layer_temperature = 205

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Blue.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 205
temperature = 205
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Clear.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 205
temperature = 205
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Green.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.74
first_layer_temperature = 200
temperature = 200

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Ivory.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Orange.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Pink.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Purple.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Red.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Silver.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-White.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 210
temperature = 210
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Basic-Yellow.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Crystal-Trans. Blue.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.72
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Crystal-Trans. Orange.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.8
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Crystal-Trans. Red.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.78
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Crystal-Trans. Yellow.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.75
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Max-Black.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.79

3
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/PLA Max-White.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.79

8
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/material/Timber-Wood.slice Normal file
View file

@ -0,0 +1,8 @@
first_layer_temperature = 200
temperature = 200
retract_length = 2
retract_speed = 55
infill_speed = 50
perimeter_speed = 50
external_perimeter_speed = 45
support_material_speed = 50

1
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/High [Default].slice Normal file
View file

@ -0,0 +1 @@
layer_height = 0.15

2
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/High [no infill-hollow].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.15
fill_density = 0

2
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/High [with support structure].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.15
support_material = 1

1
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/Standard [Default].slice Normal file
View file

@ -0,0 +1 @@
layer_height = 0.25

2
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/Standard [no infill-hollow].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.25
fill_density = 0

2
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/Standard [with support structure].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.25
support_material = 1

1
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/Super High [Default].slice Normal file
View file

@ -0,0 +1 @@
layer_height = 0.09

2
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/Super High [no infill-hollow].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.09
fill_density = 0

2
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/quality/Super High [with support structure].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.09
support_material = 1

4
StaticData/PrinterSettings/3D Stuffmaker/Mega i3/setup.ini Normal file
View file

@ -0,0 +1,4 @@
baud_rate = 250000
default_slice_engine = MatterSlice
default_material_presets = PLA Basic-Clear
windows_driver = MHSerial.inf

1
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/calibration.ini Normal file
View file

@ -0,0 +1 @@
Calibration - Box.stl

152
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/config.ini Normal file
View file

@ -0,0 +1,152 @@
avoid_crossing_perimeters = 1
bed_shape = rectangular
bed_size = 210,210
bed_temperature = 0
bottom_clip_amount = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 20
brim_width = 0
build_height = 200
cancel_gcode =
center_part_on_bed = 1
complete_objects = 0
cool_extruder_lift = 0
cooling = 1
create_raft = 1
default_acceleration = 0
disable_fan_first_layers = 1
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors
external_perimeter_speed = 45
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_count = 1
extruder_offset = 0x0,0x0,0x0,0x0
extruders_share_temperature = 0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
fill_angle = 45
fill_density = 0.2
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 75
first_layer_extrusion_width = 100%
first_layer_height = 0.3
first_layer_speed = 30%
first_layer_temperature = 205
g0 = 0
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
gcode_output_type = REPRAP
has_fan = 1
has_hardware_leveling = 0
has_heated_bed = 0
has_sd_card_reader = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap_perimeter = .06
infill_speed = 45
infill_type = TRIANGLES
layer_gcode =
layer_height = 0.25
max_fan_speed = 100
min_extrusion_before_retract = .1
min_fan_speed = 50
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.7
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
pause_gcode =
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 3
post_process =
print_center = 100,100
raft_air_gap = 0.35
raft_extruder = 0
raft_extra_distance_around_part = 5
raft_fan_speed_percent = 50
raft_layers = 0
raft_print_speed = 100%
randomize_start = 0
repair_outlines_extensive_stitching = 0
repair_outlines_keep_open = 0
resolution = 0
resume_gcode =
retract_before_travel = 20
retract_layer_change = 1
retract_length = 1
retract_length_tool_change = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 X0 Y0 ; home all axes\nM109 S[temperature]\nG28 Y0 Z0\nG91\n\n
start_perimeters_at_concave_points = 0
start_perimeters_at_non_overhang = 0
support_material = 0
support_material_angle = 45
support_material_create_internal_support = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_infill_angle = 45
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_pattern = honeycomb
support_material_spacing = 2.5
support_material_speed = 40
support_material_threshold = 0
support_material_xy_distance = 0.7
support_material_z_distance = 0.15
support_material_z_gap_layers = 1
support_type = LINES
temperature = 200
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 90
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
wipe_shield_distance = 0
wipe_tower_size = 0
z_can_be_negative = 0
z_offset = 0

2
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Black.slice Normal file
View file

@ -0,0 +1,2 @@
temperature = 205
first_layer_temperature = 205

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Blue.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 205
temperature = 205
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Clear.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 205
temperature = 205
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Green.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.74
first_layer_temperature = 200
temperature = 200

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Ivory.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Orange.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Pink.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Purple.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Red.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Silver.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-White.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 210
temperature = 210
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Basic-Yellow.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.74

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Crystal-Trans. Blue.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.72
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Crystal-Trans. Orange.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.8
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Crystal-Trans. Red.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.78
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Crystal-Trans. Yellow.slice Normal file
View file

@ -0,0 +1,3 @@
filament_diameter = 1.75
first_layer_temperature = 220
temperature = 220

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Max-Black.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.79

3
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/PLA Max-White.slice Normal file
View file

@ -0,0 +1,3 @@
first_layer_temperature = 200
temperature = 200
filament_diameter = 1.79

8
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/material/Timber-Wood.slice Normal file
View file

@ -0,0 +1,8 @@
first_layer_temperature = 200
temperature = 200
retract_length = 2
retract_speed = 55
infill_speed = 50
perimeter_speed = 50
external_perimeter_speed = 45
support_material_speed = 50

1
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/High [Default].slice Normal file
View file

@ -0,0 +1 @@
layer_height = 0.15

2
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/High [no infill-hollow].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.15
fill_density = 0

2
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/High [with support structure].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.15
support_material = 1

1
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/Standard [Default].slice Normal file
View file

@ -0,0 +1 @@
layer_height = 0.25

2
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/Standard [no infill-hollow].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.25
fill_density = 0

2
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/Standard [with support structure].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.25
support_material = 1

1
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/Super High [Default].slice Normal file
View file

@ -0,0 +1 @@
layer_height = 0.09

2
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/Super High [no infill-hollow].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.09
fill_density = 0

2
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/quality/Super High [with support structure].slice Normal file
View file

@ -0,0 +1,2 @@
layer_height = 0.09
support_material = 1

4
StaticData/PrinterSettings/3D Stuffmaker/i3 Plus+/setup.ini Normal file
View file

@ -0,0 +1,4 @@
baud_rate = 250000
default_slice_engine = MatterSlice
default_material_presets = PLA Basic-Clear
windows_driver = MHSerial.inf