4407 lines
117 KiB
Text
4407 lines
117 KiB
Text
English:
|
|
Translated:
|
|
|
|
English: • Remove the paper
|
|
Translated: • Remove the paper
|
|
|
|
English:- none -
|
|
Translated:- none -
|
|
|
|
English: Once it is finished homing we will heat the bed.
|
|
Translated: Once it is finished homing we will heat the bed.
|
|
|
|
English:\nBelow you can find a list of each setting that has changed.
|
|
Translated:\nBelow you can find a list of each setting that has changed.
|
|
|
|
English:\nUpdating a default setting will not change any override that you have applied.
|
|
Translated:\nUpdating a default setting will not change any override that you have applied.
|
|
|
|
English:$/kg
|
|
Translated:$/kg
|
|
|
|
English:%
|
|
Translated:%
|
|
|
|
English:{0} (Update Available)
|
|
Translated:{0} (Update Available)
|
|
|
|
English:{0} must be less than or equal to the {1}.
|
|
Translated:{0} must be less than or equal to the {1}.
|
|
|
|
English:{0} should be greater than 0.
|
|
Translated:{0} should be greater than 0.
|
|
|
|
English:{0} should be greater than or equal to 1/2 the {1}.
|
|
Translated:{0} should be greater than or equal to 1/2 the {1}.
|
|
|
|
English:<< Back
|
|
Translated:<< Back
|
|
|
|
English:°
|
|
Translated:°
|
|
|
|
English:°C
|
|
Translated:°C
|
|
|
|
English:100 Point Disk
|
|
Translated:100 Point Disk
|
|
|
|
English:10x10 Mesh
|
|
Translated:10x10 Mesh
|
|
|
|
English:13 Point Disk
|
|
Translated:13 Point Disk
|
|
|
|
English:2D Layer View
|
|
Translated:2D Layer View
|
|
|
|
English:3 Point Plane
|
|
Translated:3 Point Plane
|
|
|
|
English:3D
|
|
Translated:3D
|
|
|
|
English:3D Layer View
|
|
Translated:3D Layer View
|
|
|
|
English:3x3 Mesh
|
|
Translated:3x3 Mesh
|
|
|
|
English:5x5 Mesh
|
|
Translated:5x5 Mesh
|
|
|
|
English:7 Point Disk
|
|
Translated:7 Point Disk
|
|
|
|
English:A comma separated list of bed names and temperatures (e.g. "Glass,70,PEI,65,Kapton,55"). When selected the bed temperature will be set to the chosen value.
|
|
Translated:A comma separated list of bed names and temperatures (e.g. "Glass,70,PEI,65,Kapton,55"). When selected the bed temperature will be set to the chosen value.
|
|
|
|
English:A component must be selected
|
|
Translated:A component must be selected
|
|
|
|
English:A device attached to the system is not functioning.
|
|
Translated:A device attached to the system is not functioning.
|
|
|
|
English:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
|
|
Translated:A modifier of the width of the extrusion for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.
|
|
|
|
English:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
|
|
Translated:A modifier of the width of the extrusion when printing outside perimeters. Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
|
|
|
|
English:A path must be selected
|
|
Translated:A path must be selected
|
|
|
|
English:A sheet of paper
|
|
Translated:A sheet of paper
|
|
|
|
English:A single part must be selected
|
|
Translated:A single part must be selected
|
|
|
|
English:A U.S. or Canadian mobile phone number
|
|
Translated:A U.S. or Canadian mobile phone number
|
|
|
|
English:A valid email address
|
|
Translated:A valid email address
|
|
|
|
English:Abort Calibration
|
|
Translated:Abort Calibration
|
|
|
|
English:Abort Print
|
|
Translated:Abort Print
|
|
|
|
English:About
|
|
Translated:About
|
|
|
|
English:About Braille
|
|
Translated:About Braille
|
|
|
|
English:ABS Temperature Tower
|
|
Translated:ABS Temperature Tower
|
|
|
|
English:Account created
|
|
Translated:Account created
|
|
|
|
English:Action
|
|
Translated:Action
|
|
|
|
English:Action Recommended
|
|
Translated:Action Recommended
|
|
|
|
English:Action Required
|
|
Translated:Action Required
|
|
|
|
English:Add
|
|
Translated:Add
|
|
|
|
English:Add all the items on the bed to the print queue.
|
|
Translated:Add all the items on the bed to the print queue.
|
|
|
|
English:Add an.stl, .obj, .3mf, .amf, .gcode or.zip file to the Library
|
|
Translated:Add an.stl, .obj, .3mf, .amf, .gcode or.zip file to the Library
|
|
|
|
English:Add an.stl, .obj, .amf, .gcode or.zip file to the Library
|
|
Translated:Add an.stl, .obj, .amf, .gcode or.zip file to the Library
|
|
|
|
English:Add Base
|
|
Translated:Add Base
|
|
|
|
English:Add Hook
|
|
Translated:Add Hook
|
|
|
|
English:Add Image
|
|
Translated:Add Image
|
|
|
|
English:Add New Setting
|
|
Translated:Add New Setting
|
|
|
|
English:Add to Bed
|
|
Translated:Add to Bed
|
|
|
|
English:Add to Queue
|
|
Translated:Add to Queue
|
|
|
|
English:Add to Selection
|
|
Translated:Add to Selection
|
|
|
|
English:Additional Printing Errors
|
|
Translated:Additional Printing Errors
|
|
|
|
English:Adhesion
|
|
Translated:Adhesion
|
|
|
|
English:Adjust this to correct differences between expected printing speeds and actual printing speeds.
|
|
Translated:Adjust this to correct differences between expected printing speeds and actual printing speeds.
|
|
|
|
English:Advanced
|
|
Translated:Advanced
|
|
|
|
English:Advanced Array
|
|
Translated:Advanced Array
|
|
|
|
English:After Tool Change G-Code
|
|
Translated:After Tool Change G-Code
|
|
|
|
English:After Tool Change G-Code 2
|
|
Translated:After Tool Change G-Code 2
|
|
|
|
English:Air Gap
|
|
Translated:Air Gap
|
|
|
|
English:Air Gapped Layer
|
|
Translated:Air Gapped Layer
|
|
|
|
English:Alert
|
|
Translated:Alert
|
|
|
|
English:Align
|
|
Translated:Align
|
|
|
|
English:Alignment
|
|
Translated:Alignment
|
|
|
|
English:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
|
|
Translated:All extrusions are multiplied by this value. Increasing it above 1 will increase the amount of filament being extruded (1.1 is a good max value); decreasing it will decrease the amount being extruded (.9 is a good minimum value).
|
|
|
|
English:All Heaters
|
|
Translated:All Heaters
|
|
|
|
English:Allow M300 commands (play sound) to be sent to the firmware. Disable to turn off sounds.
|
|
Translated:Allow M300 commands (play sound) to be sent to the firmware. Disable to turn off sounds.
|
|
|
|
English:Already Loaded
|
|
Translated:Already Loaded
|
|
|
|
English:Alternate Centering
|
|
Translated:Alternate Centering
|
|
|
|
English:Always Centered In Back
|
|
Translated:Always Centered In Back
|
|
|
|
English:AMF File
|
|
Translated:AMF File
|
|
|
|
English:An image must be selected
|
|
Translated:An image must be selected
|
|
|
|
English:Anchor
|
|
Translated:Anchor
|
|
|
|
English:Angle
|
|
Translated:Angle
|
|
|
|
English:Anyone with this code will have access
|
|
Translated:Anyone with this code will have access
|
|
|
|
English:Application Cache
|
|
Translated:Application Cache
|
|
|
|
English:Application Storage
|
|
Translated:Application Storage
|
|
|
|
English:Apply
|
|
Translated:Apply
|
|
|
|
English:Apply changes to this print
|
|
Translated:Apply changes to this print
|
|
|
|
English:Apply leveling to G-Code during export
|
|
Translated:Apply leveling to G-Code during export
|
|
|
|
English:Are you sure you want to abort calibration?
|
|
Translated:Are you sure you want to abort calibration?
|
|
|
|
English:Are you sure you want to abort the current print and close MatterControl?
|
|
Translated:Are you sure you want to abort the current print and close MatterControl?
|
|
|
|
English:Are you sure you want to delete printer '{0}'?
|
|
Translated:Are you sure you want to delete printer '{0}'?
|
|
|
|
English:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
|
|
Translated:Are you sure you want to exit while a print is running from SD Card?\n\nNote: If you exit, it is recommended you wait until the print is completed before running MatterControl again.
|
|
|
|
English:Are you sure you want to remove the currently selected items?
|
|
Translated:Are you sure you want to remove the currently selected items?
|
|
|
|
English:Are you sure you want to sign out? You will not have access to your printer profiles or cloud library.
|
|
Translated:Are you sure you want to sign out? You will not have access to your printer profiles or cloud library.
|
|
|
|
English:Arrange All Parts
|
|
Translated:Arrange All Parts
|
|
|
|
English:As the time to print a layer decreases to this, the fan speed will be increased up to its maximum speed.
|
|
Translated:As the time to print a layer decreases to this, the fan speed will be increased up to its maximum speed.
|
|
|
|
English:At least 1 part must be selected
|
|
Translated:At least 1 part must be selected
|
|
|
|
English:At least 2 parts must be selected
|
|
Translated:At least 2 parts must be selected
|
|
|
|
English:Attempting to connect
|
|
Translated:Attempting to connect
|
|
|
|
English:Attempting to connect again may address the issue.
|
|
Translated:Attempting to connect again may address the issue.
|
|
|
|
English:Attempting to connect to {0}
|
|
Translated:Attempting to connect to {0}
|
|
|
|
English:Auto Connect
|
|
Translated:Auto Connect
|
|
|
|
English:Auto Release Motors
|
|
Translated:Auto Release Motors
|
|
|
|
English:Auto Uppercase
|
|
Translated:Auto Uppercase
|
|
|
|
English:Automatic
|
|
Translated:Automatic
|
|
|
|
English:Automatic Heater Shutdown in
|
|
Translated:Automatic Heater Shutdown in
|
|
|
|
English:Autopilot
|
|
Translated:Autopilot
|
|
|
|
English:Autopilot Multi
|
|
Translated:Autopilot Multi
|
|
|
|
English:Avoid contact with your skin.
|
|
Translated:Avoid contact with your skin.
|
|
|
|
English:Avoid Crossing Perimeters
|
|
Translated:Avoid Crossing Perimeters
|
|
|
|
English:Axis
|
|
Translated:Axis
|
|
|
|
English:Axis Position
|
|
Translated:Axis Position
|
|
|
|
English:Back
|
|
Translated:Back
|
|
|
|
English:Back Ratio
|
|
Translated:Back Ratio
|
|
|
|
English:Backing Depth
|
|
Translated:Backing Depth
|
|
|
|
English:Backlash
|
|
Translated:Backlash
|
|
|
|
English:Backup Firmware Before Update
|
|
Translated:Backup Firmware Before Update
|
|
|
|
English:Bad
|
|
Translated:Bad
|
|
|
|
English:Base
|
|
Translated:Base
|
|
|
|
English:Base Height
|
|
Translated:Base Height
|
|
|
|
English:Base Layers
|
|
Translated:Base Layers
|
|
|
|
English:Baud Rate
|
|
Translated:Baud Rate
|
|
|
|
English:Bed
|
|
Translated:Bed
|
|
|
|
English:Bed Remove Part Temperature
|
|
Translated:Bed Remove Part Temperature
|
|
|
|
English:Bed Settings
|
|
Translated:Bed Settings
|
|
|
|
English:Bed Shape
|
|
Translated:Bed Shape
|
|
|
|
English:Bed Size
|
|
Translated:Bed Size
|
|
|
|
English:Bed Surface
|
|
Translated:Bed Surface
|
|
|
|
English:Bed Surface Temperatures
|
|
Translated:Bed Surface Temperatures
|
|
|
|
English:Bed Temperature
|
|
Translated:Bed Temperature
|
|
|
|
English:Bed Wipe Temperature
|
|
Translated:Bed Wipe Temperature
|
|
|
|
English:Before Tool Change G-Code
|
|
Translated:Before Tool Change G-Code
|
|
|
|
English:Before Tool Change G-Code 2
|
|
Translated:Before Tool Change G-Code 2
|
|
|
|
English:Behavior
|
|
Translated:Behavior
|
|
|
|
English:Bend Direction
|
|
Translated:Bend Direction
|
|
|
|
English:Bevel Inset
|
|
Translated:Bevel Inset
|
|
|
|
English:Bevel Start
|
|
Translated:Bevel Start
|
|
|
|
English:Bevel Steps
|
|
Translated:Bevel Steps
|
|
|
|
English:Bevel Top
|
|
Translated:Bevel Top
|
|
|
|
English:Blue Tape
|
|
Translated:Blue Tape
|
|
|
|
English:Blue Tape Bed Temperature
|
|
Translated:Blue Tape Bed Temperature
|
|
|
|
English:Bottom Inset
|
|
Translated:Bottom Inset
|
|
|
|
English:Bottom Solid Layers
|
|
Translated:Bottom Solid Layers
|
|
|
|
English:Bridge Over Infill
|
|
Translated:Bridge Over Infill
|
|
|
|
English:Bridges
|
|
Translated:Bridges
|
|
|
|
English:Bridging Fan Speed
|
|
Translated:Bridging Fan Speed
|
|
|
|
English:Brim
|
|
Translated:Brim
|
|
|
|
English:Brim Extruder
|
|
Translated:Brim Extruder
|
|
|
|
English:Build Height
|
|
Translated:Build Height
|
|
|
|
English:BuildTak
|
|
Translated:BuildTak
|
|
|
|
English:BuildTak Bed Temperature
|
|
Translated:BuildTak Bed Temperature
|
|
|
|
English:Calculate and transmit a standard rep-rap checksum for all commands.
|
|
Translated:Calculate and transmit a standard rep-rap checksum for all commands.
|
|
|
|
English:Calculate Path
|
|
Translated:Calculate Path
|
|
|
|
English:Calculation Height
|
|
Translated:Calculation Height
|
|
|
|
English:Calibrate Printer
|
|
Translated:Calibrate Printer
|
|
|
|
English:Calibration
|
|
Translated:Calibration
|
|
|
|
English:Calibration Face
|
|
Translated:Calibration Face
|
|
|
|
English:Calibration Faces
|
|
Translated:Calibration Faces
|
|
|
|
English:Calibration Parts
|
|
Translated:Calibration Parts
|
|
|
|
English:Calibration Tab
|
|
Translated:Calibration Tab
|
|
|
|
English:Cancel
|
|
Translated:Cancel
|
|
|
|
English:Cancel command
|
|
Translated:Cancel command
|
|
|
|
English:Cancel G-Code
|
|
Translated:Cancel G-Code
|
|
|
|
English:Cancel Print
|
|
Translated:Cancel Print
|
|
|
|
English:Cancel Print?
|
|
Translated:Cancel Print?
|
|
|
|
English:Cancel the current print?
|
|
Translated:Cancel the current print?
|
|
|
|
English:Center Hole Diameter
|
|
Translated:Center Hole Diameter
|
|
|
|
English:Center Parts Before Printing
|
|
Translated:Center Parts Before Printing
|
|
|
|
English:Centered In Back
|
|
Translated:Centered In Back
|
|
|
|
English:Centering
|
|
Translated:Centering
|
|
|
|
English:Change
|
|
Translated:Change
|
|
|
|
English:Change Amount
|
|
Translated:Change Amount
|
|
|
|
English:Changing Height
|
|
Translated:Changing Height
|
|
|
|
English:Check For Update
|
|
Translated:Check For Update
|
|
|
|
English:Checking Cloud Services
|
|
Translated:Checking Cloud Services
|
|
|
|
English:Checking with webservice
|
|
Translated:Checking with webservice
|
|
|
|
English:Checks before each print that the layer height is less than the nozzle diameter (important for filament adhesion)
|
|
Translated:Checks before each print that the layer height is less than the nozzle diameter (important for filament adhesion)
|
|
|
|
English:Choose the command for showing the print progress on the printer's LCD screen, if it has one.
|
|
Translated:Choose the command for showing the print progress on the printer's LCD screen, if it has one.
|
|
|
|
English:circular
|
|
Translated:circular
|
|
|
|
English:Circular Pitch
|
|
Translated:Circular Pitch
|
|
|
|
English:Clean Filament Page
|
|
Translated:Clean Filament Page
|
|
|
|
English:Clear
|
|
Translated:Clear
|
|
|
|
English:Clear any assigned color. This may allow component colors to be visible.
|
|
Translated:Clear any assigned color. This may allow component colors to be visible.
|
|
|
|
English:Clear Bed
|
|
Translated:Clear Bed
|
|
|
|
English:Clear Bed G-Code
|
|
Translated:Clear Bed G-Code
|
|
|
|
English:Clear Cache
|
|
Translated:Clear Cache
|
|
|
|
English:Clear Height
|
|
Translated:Clear Height
|
|
|
|
English:Clear Material Setting
|
|
Translated:Clear Material Setting
|
|
|
|
English:Clear Override
|
|
Translated:Clear Override
|
|
|
|
English:Clear selection
|
|
Translated:Clear selection
|
|
|
|
English:Clear ZOffset
|
|
Translated:Clear ZOffset
|
|
|
|
English:Clearance
|
|
Translated:Clearance
|
|
|
|
English:Click 'Next' to continue.
|
|
Translated:Click 'Next' to continue.
|
|
|
|
English:Click to edit values
|
|
Translated:Click to edit values
|
|
|
|
English:Click to go back
|
|
Translated:Click to go back
|
|
|
|
English:Close
|
|
Translated:Close
|
|
|
|
English:Cloud Library
|
|
Translated:Cloud Library
|
|
|
|
English:Coast At End
|
|
Translated:Coast At End
|
|
|
|
English:Collapse
|
|
Translated:Collapse
|
|
|
|
English:Color
|
|
Translated:Color
|
|
|
|
English:Color 2
|
|
Translated:Color 2
|
|
|
|
English:Color View
|
|
Translated:Color View
|
|
|
|
English:Combine
|
|
Translated:Combine
|
|
|
|
English:Community
|
|
Translated:Community
|
|
|
|
English:Completed
|
|
Translated:Completed
|
|
|
|
English:CONCENTRIC
|
|
Translated:CONCENTRIC
|
|
|
|
English:Cone
|
|
Translated:Cone
|
|
|
|
English:Configure EEProm
|
|
Translated:Configure EEProm
|
|
|
|
English:Configure Notifications
|
|
Translated:Configure Notifications
|
|
|
|
English:Configure Plugins
|
|
Translated:Configure Plugins
|
|
|
|
English:Confirm your Password
|
|
Translated:Confirm your Password
|
|
|
|
English:Congratulations! Print Leveling is now configured and enabled.
|
|
Translated:Congratulations! Print Leveling is now configured and enabled.
|
|
|
|
English:Connect
|
|
Translated:Connect
|
|
|
|
English:Connect to the currently selected printer
|
|
Translated:Connect to the currently selected printer
|
|
|
|
English:Connect to your printer to continue
|
|
Translated:Connect to your printer to continue
|
|
|
|
English:Connect your printer to check for firmware updates.
|
|
Translated:Connect your printer to check for firmware updates.
|
|
|
|
English:Connected
|
|
Translated:Connected
|
|
|
|
English:Connected to Emulator
|
|
Translated:Connected to Emulator
|
|
|
|
English:Connection Failed
|
|
Translated:Connection Failed
|
|
|
|
English:Connection succeeded
|
|
Translated:Connection succeeded
|
|
|
|
English:Connection succeeded (port {0}).
|
|
Translated:Connection succeeded (port {0}).
|
|
|
|
English:Continue
|
|
Translated:Continue
|
|
|
|
English:Continue Printing
|
|
Translated:Continue Printing
|
|
|
|
English:Controls
|
|
Translated:Controls
|
|
|
|
English:Convert to Support
|
|
Translated:Convert to Support
|
|
|
|
English:Convert to Wipe Tower
|
|
Translated:Convert to Wipe Tower
|
|
|
|
English:Cooling
|
|
Translated:Cooling
|
|
|
|
English:copy
|
|
Translated:copy
|
|
|
|
English:Copy
|
|
Translated:Copy
|
|
|
|
English:Copy all settings including hardware calibration
|
|
Translated:Copy all settings including hardware calibration
|
|
|
|
English:Copy and recalibrate
|
|
Translated:Copy and recalibrate
|
|
|
|
English:Copy everything but hardware specific calibration settings
|
|
Translated:Copy everything but hardware specific calibration settings
|
|
|
|
English:Copy extrusions data
|
|
Translated:Copy extrusions data
|
|
|
|
English:Copy Mesh
|
|
Translated:Copy Mesh
|
|
|
|
English:Copy Printers
|
|
Translated:Copy Printers
|
|
|
|
English:Copy Printers to Account
|
|
Translated:Copy Printers to Account
|
|
|
|
English:Cost
|
|
Translated:Cost
|
|
|
|
English:Count
|
|
Translated:Count
|
|
|
|
English:count or mm
|
|
Translated:count or mm
|
|
|
|
English:Create
|
|
Translated:Create
|
|
|
|
English:Create a printer to export G-Code
|
|
Translated:Create a printer to export G-Code
|
|
|
|
English:Create Account
|
|
Translated:Create Account
|
|
|
|
English:Create An Account
|
|
Translated:Create An Account
|
|
|
|
English:Create Brim
|
|
Translated:Create Brim
|
|
|
|
English:Create Folder
|
|
Translated:Create Folder
|
|
|
|
English:Create New Design
|
|
Translated:Create New Design
|
|
|
|
English:Create Part Sheet
|
|
Translated:Create Part Sheet
|
|
|
|
English:Create Perimeter
|
|
Translated:Create Perimeter
|
|
|
|
English:Create Printer
|
|
Translated:Create Printer
|
|
|
|
English:Create Pulse
|
|
Translated:Create Pulse
|
|
|
|
English:Create Raft
|
|
Translated:Create Raft
|
|
|
|
English:Create Skirt
|
|
Translated:Create Skirt
|
|
|
|
English:Create Support
|
|
Translated:Create Support
|
|
|
|
English:Create Supports
|
|
Translated:Create Supports
|
|
|
|
English:Creates a brim attached to the base of the print. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
|
Translated:Creates a brim attached to the base of the print. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
|
|
|
English:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
|
|
Translated:Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
|
|
|
|
English:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
|
Translated:Creates a raft under the printed part. Useful to prevent warping when printing ABS (and other warping-prone plastics) as it helps parts adhere to the bed.
|
|
|
|
English:Creates an outline around the print, but not attached to it. This is useful for priming the nozzle to ensure the plastic is flowing when the print starts.
|
|
Translated:Creates an outline around the print, but not attached to it. This is useful for priming the nozzle to ensure the plastic is flowing when the print starts.
|
|
|
|
English:Creating Gear
|
|
Translated:Creating Gear
|
|
|
|
English:Creating Threads
|
|
Translated:Creating Threads
|
|
|
|
English:Creation Data
|
|
Translated:Creation Data
|
|
|
|
English:Cube
|
|
Translated:Cube
|
|
|
|
English:Current Default
|
|
Translated:Current Default
|
|
|
|
English:Currently available serial ports.
|
|
Translated:Currently available serial ports.
|
|
|
|
English:Curve
|
|
Translated:Curve
|
|
|
|
English:Custom Points
|
|
Translated:Custom Points
|
|
|
|
English:Cut
|
|
Translated:Cut
|
|
|
|
English:Cut Height
|
|
Translated:Cut Height
|
|
|
|
English:Cylinder
|
|
Translated:Cylinder
|
|
|
|
English:Debug Render Options
|
|
Translated:Debug Render Options
|
|
|
|
English:Default
|
|
Translated:Default
|
|
|
|
English:Default Acceleration
|
|
Translated:Default Acceleration
|
|
|
|
English:Define New
|
|
Translated:Define New
|
|
|
|
English:Delete
|
|
Translated:Delete
|
|
|
|
English:Delete Printer
|
|
Translated:Delete Printer
|
|
|
|
English:Delete Printer?
|
|
Translated:Delete Printer?
|
|
|
|
English:Delete selection
|
|
Translated:Delete selection
|
|
|
|
English:Density
|
|
Translated:Density
|
|
|
|
English:Depth
|
|
Translated:Depth
|
|
|
|
English:Depth Percent
|
|
Translated:Depth Percent
|
|
|
|
English:Description
|
|
Translated:Description
|
|
|
|
English:Description - Markdown Text
|
|
Translated:Description - Markdown Text
|
|
|
|
English:Design Apps
|
|
Translated:Design Apps
|
|
|
|
English:Design Name
|
|
Translated:Design Name
|
|
|
|
English:Details
|
|
Translated:Details
|
|
|
|
English:Detect gaps between perimeters that are too thin to fill with normal infill and attempt to fill them.
|
|
Translated:Detect gaps between perimeters that are too thin to fill with normal infill and attempt to fill them.
|
|
|
|
English:Detect perimeters that cross over themselves and combine them.
|
|
Translated:Detect perimeters that cross over themselves and combine them.
|
|
|
|
English:Detecting device firmware...
|
|
Translated:Detecting device firmware...
|
|
|
|
English:Detects sections of the model that would be too thin to print and expands them to make them printable.
|
|
Translated:Detects sections of the model that would be too thin to print and expands them to make them printable.
|
|
|
|
English:Developed By
|
|
Translated:Developed By
|
|
|
|
English:Diagnostics
|
|
Translated:Diagnostics
|
|
|
|
English:Diameter
|
|
Translated:Diameter
|
|
|
|
English:Diameter Top
|
|
Translated:Diameter Top
|
|
|
|
English:Direction
|
|
Translated:Direction
|
|
|
|
English:Disable Fan For The First
|
|
Translated:Disable Fan For The First
|
|
|
|
English:Disabled: {0}
|
|
Translated:Disabled: {0}
|
|
|
|
English:Discard Changes
|
|
Translated:Discard Changes
|
|
|
|
English:Discard Changes Editing
|
|
Translated:Discard Changes Editing
|
|
|
|
English:Disconnect
|
|
Translated:Disconnect
|
|
|
|
English:Disconnect and stop the current print?
|
|
Translated:Disconnect and stop the current print?
|
|
|
|
English:Disconnect from current printer
|
|
Translated:Disconnect from current printer
|
|
|
|
English:Disconnected
|
|
Translated:Disconnected
|
|
|
|
English:Dismiss
|
|
Translated:Dismiss
|
|
|
|
English:Distance
|
|
Translated:Distance
|
|
|
|
English:Distance From Object
|
|
Translated:Distance From Object
|
|
|
|
English:Distance or Loops
|
|
Translated:Distance or Loops
|
|
|
|
English:Done
|
|
Translated:Done
|
|
|
|
English:Don't remind me again
|
|
Translated:Don't remind me again
|
|
|
|
English:Down Arrow
|
|
Translated:Down Arrow
|
|
|
|
English:Downloading
|
|
Translated:Downloading
|
|
|
|
English:Downloads
|
|
Translated:Downloads
|
|
|
|
English:Dual Contouring
|
|
Translated:Dual Contouring
|
|
|
|
English:Dual Extrusion Align
|
|
Translated:Dual Extrusion Align
|
|
|
|
English:Duplicate
|
|
Translated:Duplicate
|
|
|
|
English:Duplication
|
|
Translated:Duplication
|
|
|
|
English:Each extruder has a separate part cooling fan that is controlled independently.
|
|
Translated:Each extruder has a separate part cooling fan that is controlled independently.
|
|
|
|
English:Each Extruder Has Fan
|
|
Translated:Each Extruder Has Fan
|
|
|
|
English:Easing Option
|
|
Translated:Easing Option
|
|
|
|
English:Easing Type
|
|
Translated:Easing Type
|
|
|
|
English:Edit
|
|
Translated:Edit
|
|
|
|
English:Edit Component
|
|
Translated:Edit Component
|
|
|
|
English:Edit Leveling Data
|
|
Translated:Edit Leveling Data
|
|
|
|
English:Edit Page
|
|
Translated:Edit Page
|
|
|
|
English:Edit Radius
|
|
Translated:Edit Radius
|
|
|
|
English:Edit Selected Setting
|
|
Translated:Edit Selected Setting
|
|
|
|
English:Elbow
|
|
Translated:Elbow
|
|
|
|
English:Email
|
|
Translated:Email
|
|
|
|
English:Empty
|
|
Translated:Empty
|
|
|
|
English:Empty Bed
|
|
Translated:Empty Bed
|
|
|
|
English:Emulate Endstops
|
|
Translated:Emulate Endstops
|
|
|
|
English:Enable Fan
|
|
Translated:Enable Fan
|
|
|
|
English:Enable Firmware Sounds
|
|
Translated:Enable Firmware Sounds
|
|
|
|
English:Enable Recovery
|
|
Translated:Enable Recovery
|
|
|
|
English:Enable Retractions
|
|
Translated:Enable Retractions
|
|
|
|
English:Enable Socketeer Client
|
|
Translated:Enable Socketeer Client
|
|
|
|
English:Enable this if your printer has an automatic Z Probe and you want to validate the leveling before every print. This will run immediately after M190 (print bed reaches temp).
|
|
Translated:Enable this if your printer has an automatic Z Probe and you want to validate the leveling before every print. This will run immediately after M190 (print bed reaches temp).
|
|
|
|
English:Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.
|
|
Translated:Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.
|
|
|
|
English:End
|
|
Translated:End
|
|
|
|
English:End G-Code
|
|
Translated:End G-Code
|
|
|
|
English:End Height Percent
|
|
Translated:End Height Percent
|
|
|
|
English:Ending Angle
|
|
Translated:Ending Angle
|
|
|
|
English:Enter a Design Name Here
|
|
Translated:Enter a Design Name Here
|
|
|
|
English:Enter a username
|
|
Translated:Enter a username
|
|
|
|
English:Enter New Name Here
|
|
Translated:Enter New Name Here
|
|
|
|
English:Enter Person Access Token
|
|
Translated:Enter Person Access Token
|
|
|
|
English:Enter Share Code
|
|
Translated:Enter Share Code
|
|
|
|
English:Enter your email address
|
|
Translated:Enter your email address
|
|
|
|
English:Enter your password
|
|
Translated:Enter your password
|
|
|
|
English:Enter your username or email address
|
|
Translated:Enter your username or email address
|
|
|
|
English:Error
|
|
Translated:Error
|
|
|
|
English:Estimated Cost
|
|
Translated:Estimated Cost
|
|
|
|
English:Estimated Mass
|
|
Translated:Estimated Mass
|
|
|
|
English:Evaluate every layer for support requirements. NOTE: If there are any support columns, this setting is ignored.
|
|
Translated:Evaluate every layer for support requirements. NOTE: If there are any support columns, this setting is ignored.
|
|
|
|
English:Exact clone
|
|
Translated:Exact clone
|
|
|
|
English:Exit while printing
|
|
Translated:Exit while printing
|
|
|
|
English:Expand
|
|
Translated:Expand
|
|
|
|
English:Expand Distance
|
|
Translated:Expand Distance
|
|
|
|
English:Expand Thin Walls
|
|
Translated:Expand Thin Walls
|
|
|
|
English:Expand Width
|
|
Translated:Expand Width
|
|
|
|
English:Experimental
|
|
Translated:Experimental
|
|
|
|
English:Export
|
|
Translated:Export
|
|
|
|
English:Export bed to
|
|
Translated:Export bed to
|
|
|
|
English:Export File
|
|
Translated:Export File
|
|
|
|
English:Export G-Code
|
|
Translated:Export G-Code
|
|
|
|
English:Export Printer
|
|
Translated:Export Printer
|
|
|
|
English:Export selection to
|
|
Translated:Export selection to
|
|
|
|
English:Exporting
|
|
Translated:Exporting
|
|
|
|
English:External Perimeters First
|
|
Translated:External Perimeters First
|
|
|
|
English:Extra Length After Tool Change
|
|
Translated:Extra Length After Tool Change
|
|
|
|
English:Extra Length On Restart
|
|
Translated:Extra Length On Restart
|
|
|
|
English:Extrude
|
|
Translated:Extrude
|
|
|
|
English:Extrude filament
|
|
Translated:Extrude filament
|
|
|
|
English:Extruder
|
|
Translated:Extruder
|
|
|
|
English:Extruder 2 Clean Page
|
|
Translated:Extruder 2 Clean Page
|
|
|
|
English:Extruder 2 Speed
|
|
Translated:Extruder 2 Speed
|
|
|
|
English:Extruder 2 Temperature
|
|
Translated:Extruder 2 Temperature
|
|
|
|
English:Extruder Change
|
|
Translated:Extruder Change
|
|
|
|
English:Extruder Count
|
|
Translated:Extruder Count
|
|
|
|
English:Extruder Temperature
|
|
Translated:Extruder Temperature
|
|
|
|
English:Extruder Wipe Temperature
|
|
Translated:Extruder Wipe Temperature
|
|
|
|
English:Extruders
|
|
Translated:Extruders
|
|
|
|
English:Extrusion
|
|
Translated:Extrusion
|
|
|
|
English:Extrusion Multiplier
|
|
Translated:Extrusion Multiplier
|
|
|
|
English:Face Orientation
|
|
Translated:Face Orientation
|
|
|
|
English:Failed
|
|
Translated:Failed
|
|
|
|
English:Failure Response A
|
|
Translated:Failure Response A
|
|
|
|
English:Failure Response B
|
|
Translated:Failure Response B
|
|
|
|
English:Fan
|
|
Translated:Fan
|
|
|
|
English:Fan Speed
|
|
Translated:Fan Speed
|
|
|
|
English:Fastest
|
|
Translated:Fastest
|
|
|
|
English:Features
|
|
Translated:Features
|
|
|
|
English:Filament
|
|
Translated:Filament
|
|
|
|
English:Filament Length
|
|
Translated:Filament Length
|
|
|
|
English:Filament Settings
|
|
Translated:Filament Settings
|
|
|
|
English:Filament Speed
|
|
Translated:Filament Speed
|
|
|
|
English:Filament Volume
|
|
Translated:Filament Volume
|
|
|
|
English:File Path
|
|
Translated:File Path
|
|
|
|
English:Fill Density
|
|
Translated:Fill Density
|
|
|
|
English:Fill Holes
|
|
Translated:Fill Holes
|
|
|
|
English:Fill Thin Gaps
|
|
Translated:Fill Thin Gaps
|
|
|
|
English:Filters
|
|
Translated:Filters
|
|
|
|
English:Final Count
|
|
Translated:Final Count
|
|
|
|
English:Final Faces
|
|
Translated:Final Faces
|
|
|
|
English:Final Vertices
|
|
Translated:Final Vertices
|
|
|
|
English:Finalized
|
|
Translated:Finalized
|
|
|
|
English:Finally click 'Next' to continue.
|
|
Translated:Finally click 'Next' to continue.
|
|
|
|
English:Find and create supports where needed
|
|
Translated:Find and create supports where needed
|
|
|
|
English:Find Slice
|
|
Translated:Find Slice
|
|
|
|
English:Finish
|
|
Translated:Finish
|
|
|
|
English:Finished Print: {0}
|
|
Translated:Finished Print: {0}
|
|
|
|
English:Finishing Startup
|
|
Translated:Finishing Startup
|
|
|
|
English:Firmware Type
|
|
Translated:Firmware Type
|
|
|
|
English:Firmware Updates
|
|
Translated:Firmware Updates
|
|
|
|
English:Firmware Version: {0}
|
|
Translated:Firmware Version: {0}
|
|
|
|
English:First Layer
|
|
Translated:First Layer
|
|
|
|
English:First layer only
|
|
Translated:First layer only
|
|
|
|
English:First Layer Only
|
|
Translated:First Layer Only
|
|
|
|
English:First Layer Thickness
|
|
Translated:First Layer Thickness
|
|
|
|
English:Fit to Bounds
|
|
Translated:Fit to Bounds
|
|
|
|
English:Fit to Cylinder
|
|
Translated:Fit to Cylinder
|
|
|
|
English:Flat
|
|
Translated:Flat
|
|
|
|
English:Flattened
|
|
Translated:Flattened
|
|
|
|
English:Folder Name
|
|
Translated:Folder Name
|
|
|
|
English:Font
|
|
Translated:Font
|
|
|
|
English:Force a retraction when moving between islands (distinct parts on the layer).
|
|
Translated:Force a retraction when moving between islands (distinct parts on the layer).
|
|
|
|
English:Forces external perimeters to be printed first. By default, they will print last.
|
|
Translated:Forces external perimeters to be printed first. By default, they will print last.
|
|
|
|
English:Forces external perimeters to be printed first. By default, they will print last. Using 3 or more perimeters will result in better quality.
|
|
Translated:Forces external perimeters to be printed first. By default, they will print last. Using 3 or more perimeters will result in better quality.
|
|
|
|
English:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
|
|
Translated:Forces the print to have only one extrusion and gradually increase the Z height during the print. Only one part will print at a time with this feature.
|
|
|
|
English:Forces the printer to heat the nozzle before homing.
|
|
Translated:Forces the printer to heat the nozzle before homing.
|
|
|
|
English:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
|
|
Translated:Forces the slicer to attempt to avoid having the perimeter line cross over existing perimeter lines. This can help with oozing or strings.
|
|
|
|
English:Forgot Password
|
|
Translated:Forgot Password
|
|
|
|
English:Forums
|
|
Translated:Forums
|
|
|
|
English:Furthest Back
|
|
Translated:Furthest Back
|
|
|
|
English:g/cm³
|
|
Translated:g/cm³
|
|
|
|
English:Garolite
|
|
Translated:Garolite
|
|
|
|
English:Garolite Bed Temperature
|
|
Translated:Garolite Bed Temperature
|
|
|
|
English:G-Code
|
|
Translated:G-Code
|
|
|
|
English:G-Code Line
|
|
Translated:G-Code Line
|
|
|
|
English:G-Code to be run after every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
Translated:G-Code to be run after every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
|
|
English:G-Code to be run after switching to extruder 2. Will use standard after G-Code if not set. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
Translated:G-Code to be run after switching to extruder 2. Will use standard after G-Code if not set. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
|
|
English:G-Code to be run after the change in Z height for the next layer.
|
|
Translated:G-Code to be run after the change in Z height for the next layer.
|
|
|
|
English:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
|
|
Translated:G-Code to be run at the end of all automatic output (the very end of the G-Code commands).
|
|
|
|
English:G-Code to be run before every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
Translated:G-Code to be run before every tool change. You can use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
|
|
English:G-Code to be run before switching to extruder 2. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
Translated:G-Code to be run before switching to extruder 2. Will use standard before G-Code if not set. You can use [wipe_tower_x] [wipe_tower_y] & [wipe_tower_z] to set the extruder position if needed. You can also use '; WRITE_RAW' to skip checksums or '; NO_PROCESSING' to skip position offsetting.
|
|
|
|
English:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
|
|
Translated:G-Code to be run immediately following the temperature setting commands. Including commands to set temperature in this section will cause them not be generated outside of this section. Will accept Custom G-Code variables.
|
|
|
|
English:G-Code to be run when the print resumes after a pause.
|
|
Translated:G-Code to be run when the print resumes after a pause.
|
|
|
|
English:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
|
|
Translated:G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.
|
|
|
|
English:G-Code to run when a print is canceled.
|
|
Translated:G-Code to run when a print is canceled.
|
|
|
|
English:G-Code to run when the printer is paused.
|
|
Translated:G-Code to run when the printer is paused.
|
|
|
|
English:G-Code used by Autopilot to clear the bed after a print completes. This is only useful on a printer designed to clear the bed.
|
|
Translated:G-Code used by Autopilot to clear the bed after a print completes. This is only useful on a printer designed to clear the bed.
|
|
|
|
English:Gear
|
|
Translated:Gear
|
|
|
|
English:General
|
|
Translated:General
|
|
|
|
English:Generate
|
|
Translated:Generate
|
|
|
|
English:Generate Support
|
|
Translated:Generate Support
|
|
|
|
English:Generate Supports
|
|
Translated:Generate Supports
|
|
|
|
English:Generates an outline around the support material to improve strength and hold up interface layers.
|
|
Translated:Generates an outline around the support material to improve strength and hold up interface layers.
|
|
|
|
English:Generating Lithophane
|
|
Translated:Generating Lithophane
|
|
|
|
English:GitHub Personal Access Token
|
|
Translated:GitHub Personal Access Token
|
|
|
|
English:Glass
|
|
Translated:Glass
|
|
|
|
English:Glass Bed Temperature
|
|
Translated:Glass Bed Temperature
|
|
|
|
English:Good
|
|
Translated:Good
|
|
|
|
English:Great
|
|
Translated:Great
|
|
|
|
English:GRID
|
|
Translated:GRID
|
|
|
|
English:Group
|
|
Translated:Group
|
|
|
|
English:Guides and Articles
|
|
Translated:Guides and Articles
|
|
|
|
English:GYROID
|
|
Translated:GYROID
|
|
|
|
English:Half Cylinder
|
|
Translated:Half Cylinder
|
|
|
|
English:Half Sphere
|
|
Translated:Half Sphere
|
|
|
|
English:Half Wedge
|
|
Translated:Half Wedge
|
|
|
|
English:Hardware
|
|
Translated:Hardware
|
|
|
|
English:Has C Axis
|
|
Translated:Has C Axis
|
|
|
|
English:Has Conductive Nozzle
|
|
Translated:Has Conductive Nozzle
|
|
|
|
English:Has Fan
|
|
Translated:Has Fan
|
|
|
|
English:Has Filament Runout Sensor
|
|
Translated:Has Filament Runout Sensor
|
|
|
|
English:Has Hardware Leveling
|
|
Translated:Has Hardware Leveling
|
|
|
|
English:Has Heated Bed
|
|
Translated:Has Heated Bed
|
|
|
|
English:Has Power Control
|
|
Translated:Has Power Control
|
|
|
|
English:Has SD Card Reader
|
|
Translated:Has SD Card Reader
|
|
|
|
English:Has Swappable Bed
|
|
Translated:Has Swappable Bed
|
|
|
|
English:Has Z Probe
|
|
Translated:Has Z Probe
|
|
|
|
English:Has Z Servo
|
|
Translated:Has Z Servo
|
|
|
|
English:Have MatterControl send you email messages about your print
|
|
Translated:Have MatterControl send you email messages about your print
|
|
|
|
English:Have MatterControl send you text messages about your print
|
|
Translated:Have MatterControl send you text messages about your print
|
|
|
|
English:Heat Before Homing
|
|
Translated:Heat Before Homing
|
|
|
|
English:Heated Bed
|
|
Translated:Heated Bed
|
|
|
|
English:Heating Bed
|
|
Translated:Heating Bed
|
|
|
|
English:Heating Nozzle
|
|
Translated:Heating Nozzle
|
|
|
|
English:Heating the printer
|
|
Translated:Heating the printer
|
|
|
|
English:Height
|
|
Translated:Height
|
|
|
|
English:Height Percent
|
|
Translated:Height Percent
|
|
|
|
English:Help
|
|
Translated:Help
|
|
|
|
English:HEXAGON
|
|
Translated:HEXAGON
|
|
|
|
English:Hide
|
|
Translated:Hide
|
|
|
|
English:High Precision
|
|
Translated:High Precision
|
|
|
|
English:History
|
|
Translated:History
|
|
|
|
English:Hold 'Shift' to scale proportionally, Type 'Esc' to cancel
|
|
Translated:Hold 'Shift' to scale proportionally, Type 'Esc' to cancel
|
|
|
|
English:Hollow
|
|
Translated:Hollow
|
|
|
|
English:Hollow Out
|
|
Translated:Hollow Out
|
|
|
|
English:Home
|
|
Translated:Home
|
|
|
|
English:Home C
|
|
Translated:Home C
|
|
|
|
English:Home X
|
|
Translated:Home X
|
|
|
|
English:Home X, Y and Z
|
|
Translated:Home X, Y and Z
|
|
|
|
English:Home Y
|
|
Translated:Home Y
|
|
|
|
English:Home Z
|
|
Translated:Home Z
|
|
|
|
English:Home Z Max
|
|
Translated:Home Z Max
|
|
|
|
English:Homing
|
|
Translated:Homing
|
|
|
|
English:Homing the printer
|
|
Translated:Homing the printer
|
|
|
|
English:Hotend
|
|
Translated:Hotend
|
|
|
|
English:Hotend {0}
|
|
Translated:Hotend {0}
|
|
|
|
English:Hotend {0} Temperature
|
|
Translated:Hotend {0} Temperature
|
|
|
|
English:Hotend Temperature
|
|
Translated:Hotend Temperature
|
|
|
|
English:Hotend Temperature:
|
|
Translated:Hotend Temperature:
|
|
|
|
English:Ideal for cloning settings across different physical printers
|
|
Translated:Ideal for cloning settings across different physical printers
|
|
|
|
English:if connected
|
|
Translated:if connected
|
|
|
|
English:If set, the printer will automatically attempt to connect when selected.
|
|
Translated:If set, the printer will automatically attempt to connect when selected.
|
|
|
|
English:If the extruder has been running for a long time, it may be reporting values that are too large, this will periodically reset it.
|
|
Translated:If the extruder has been running for a long time, it may be reporting values that are too large, this will periodically reset it.
|
|
|
|
English:If the printer has a physically touching z probe (like a BLTouch) this will enable automatic validation of the distance between the nozzle and the z probe.
|
|
Translated:If the printer has a physically touching z probe (like a BLTouch) this will enable automatic validation of the distance between the nozzle and the z probe.
|
|
|
|
English:If the time to print a layer is less than this, the fan will turn on at its minimum speed. It will then ramp up to its maximum speed as the layer time decreases.
|
|
Translated:If the time to print a layer is less than this, the fan will turn on at its minimum speed. It will then ramp up to its maximum speed as the layer time decreases.
|
|
|
|
English:Image
|
|
Translated:Image
|
|
|
|
English:Image Converter
|
|
Translated:Image Converter
|
|
|
|
English:Image Missing
|
|
Translated:Image Missing
|
|
|
|
English:Image to Path
|
|
Translated:Image to Path
|
|
|
|
English:Immediately turn off heaters
|
|
Translated:Immediately turn off heaters
|
|
|
|
English:Import
|
|
Translated:Import
|
|
|
|
English:Import Presets
|
|
Translated:Import Presets
|
|
|
|
English:Import Printer
|
|
Translated:Import Printer
|
|
|
|
English:Import Successful
|
|
Translated:Import Successful
|
|
|
|
English:Import Wizard
|
|
Translated:Import Wizard
|
|
|
|
English:In / Out Indicators
|
|
Translated:In / Out Indicators
|
|
|
|
English:In addition to the normal firmware errors, these comma separated strings will cause MatterControl to stop and show an error message.
|
|
Translated:In addition to the normal firmware errors, these comma separated strings will cause MatterControl to stop and show an error message.
|
|
|
|
English:Inactive Cool Down
|
|
Translated:Inactive Cool Down
|
|
|
|
English:Include a picture of my print
|
|
Translated:Include a picture of my print
|
|
|
|
English:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
|
|
Translated:Indicates that the Z axis homes the hot end away from the bed (z-max homing)
|
|
|
|
English:Infill
|
|
Translated:Infill
|
|
|
|
English:Infill Amount
|
|
Translated:Infill Amount
|
|
|
|
English:Infill Angle
|
|
Translated:Infill Angle
|
|
|
|
English:Infill Overlap
|
|
Translated:Infill Overlap
|
|
|
|
English:Infill Speeds
|
|
Translated:Infill Speeds
|
|
|
|
English:Infill Type
|
|
Translated:Infill Type
|
|
|
|
English:Inflate
|
|
Translated:Inflate
|
|
|
|
English:Inflate Path
|
|
Translated:Inflate Path
|
|
|
|
English:Initial Faces
|
|
Translated:Initial Faces
|
|
|
|
English:Initial Layer Speed
|
|
Translated:Initial Layer Speed
|
|
|
|
English:Initial Layers
|
|
Translated:Initial Layers
|
|
|
|
English:Initial Vertices
|
|
Translated:Initial Vertices
|
|
|
|
English:Initializing Library
|
|
Translated:Initializing Library
|
|
|
|
English:Inner Diameter
|
|
Translated:Inner Diameter
|
|
|
|
English:Inner Gear Tooth Count
|
|
Translated:Inner Gear Tooth Count
|
|
|
|
English:Inner Style
|
|
Translated:Inner Style
|
|
|
|
English:Input Resolution
|
|
Translated:Input Resolution
|
|
|
|
English:Insert Filament 2 Page
|
|
Translated:Insert Filament 2 Page
|
|
|
|
English:Insert Filament Page
|
|
Translated:Insert Filament Page
|
|
|
|
English:Inside Perimeters
|
|
Translated:Inside Perimeters
|
|
|
|
English:Interface Layer
|
|
Translated:Interface Layer
|
|
|
|
English:Interface Layers
|
|
Translated:Interface Layers
|
|
|
|
English:Interface Tour
|
|
Translated:Interface Tour
|
|
|
|
English:Intermediate
|
|
Translated:Intermediate
|
|
|
|
English:Intersect
|
|
Translated:Intersect
|
|
|
|
English:Intersection
|
|
Translated:Intersection
|
|
|
|
English:Inventory
|
|
Translated:Inventory
|
|
|
|
English:Invert
|
|
Translated:Invert
|
|
|
|
English:IP Finder
|
|
Translated:IP Finder
|
|
|
|
English:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
|
|
Translated:It appears your last print failed to complete.\n\nWould your like to attempt to recover from the last know position?
|
|
|
|
English:It is currently set to {0}.
|
|
Translated:It is currently set to {0}.
|
|
|
|
English:Iterations
|
|
Translated:Iterations
|
|
|
|
English:Jerk Velocity
|
|
Translated:Jerk Velocity
|
|
|
|
English:Kapton
|
|
Translated:Kapton
|
|
|
|
English:Kapton Bed Temperature
|
|
Translated:Kapton Bed Temperature
|
|
|
|
English:Keys
|
|
Translated:Keys
|
|
|
|
English:Language
|
|
Translated:Language
|
|
|
|
English:Laser Speed
|
|
Translated:Laser Speed
|
|
|
|
English:Latitude Sides
|
|
Translated:Latitude Sides
|
|
|
|
English:Lay Flat
|
|
Translated:Lay Flat
|
|
|
|
English:Layer
|
|
Translated:Layer
|
|
|
|
English:Layer Change G-Code
|
|
Translated:Layer Change G-Code
|
|
|
|
English:Layer Thickness
|
|
Translated:Layer Thickness
|
|
|
|
English:Layer Top
|
|
Translated:Layer Top
|
|
|
|
English:Layer(s) To Pause
|
|
Translated:Layer(s) To Pause
|
|
|
|
English:layers
|
|
Translated:layers
|
|
|
|
English:Layers
|
|
Translated:Layers
|
|
|
|
English:Layers / Surface
|
|
Translated:Layers / Surface
|
|
|
|
English:layers or mm
|
|
Translated:layers or mm
|
|
|
|
English:left click
|
|
Translated:left click
|
|
|
|
English:left drag
|
|
Translated:left drag
|
|
|
|
English:Left Inset
|
|
Translated:Left Inset
|
|
|
|
English:Length
|
|
Translated:Length
|
|
|
|
English:Length of extra filament to extrude after a complete tool change (in addition to the re-extrusion of the tool change retraction distance).
|
|
Translated:Length of extra filament to extrude after a complete tool change (in addition to the re-extrusion of the tool change retraction distance).
|
|
|
|
English:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
|
|
Translated:Length of filament to extrude after a complete retraction (in addition to the re-extrusion of the Length on Move distance).
|
|
|
|
English:Length on Tool Change
|
|
Translated:Length on Tool Change
|
|
|
|
English:Let's show you around before you get started.
|
|
Translated:Let's show you around before you get started.
|
|
|
|
English:Letter
|
|
Translated:Letter
|
|
|
|
English:Leveling
|
|
Translated:Leveling
|
|
|
|
English:Leveling Data Visualizer
|
|
Translated:Leveling Data Visualizer
|
|
|
|
English:Leveling Insets
|
|
Translated:Leveling Insets
|
|
|
|
English:Leveling Solution
|
|
Translated:Leveling Solution
|
|
|
|
English:Library
|
|
Translated:Library
|
|
|
|
English:Limited Connectivity
|
|
Translated:Limited Connectivity
|
|
|
|
English:Line {0}
|
|
Translated:Line {0}
|
|
|
|
English:Line Checksums
|
|
Translated:Line Checksums
|
|
|
|
English:Line Inspector
|
|
Translated:Line Inspector
|
|
|
|
English:Linear Array
|
|
Translated:Linear Array
|
|
|
|
English:Linear Extrude
|
|
Translated:Linear Extrude
|
|
|
|
English:LINES
|
|
Translated:LINES
|
|
|
|
English:List of IP's discovered on the network
|
|
Translated:List of IP's discovered on the network
|
|
|
|
English:Lithophane
|
|
Translated:Lithophane
|
|
|
|
English:Load
|
|
Translated:Load
|
|
|
|
English:Load Extruder
|
|
Translated:Load Extruder
|
|
|
|
English:Load Extruder {0}
|
|
Translated:Load Extruder {0}
|
|
|
|
English:Load filament
|
|
Translated:Load filament
|
|
|
|
English:Load Filament
|
|
Translated:Load Filament
|
|
|
|
English:Load Filament Length
|
|
Translated:Load Filament Length
|
|
|
|
English:Load Material
|
|
Translated:Load Material
|
|
|
|
English:Loading
|
|
Translated:Loading
|
|
|
|
English:Loading GCode
|
|
Translated:Loading GCode
|
|
|
|
English:Loading G-Code
|
|
Translated:Loading G-Code
|
|
|
|
English:Loading Help
|
|
Translated:Loading Help
|
|
|
|
English:Local Library
|
|
Translated:Local Library
|
|
|
|
English:Location of the '{0}' setting
|
|
Translated:Location of the '{0}' setting
|
|
|
|
English:Lock Proportion
|
|
Translated:Lock Proportion
|
|
|
|
English:Longitude Sides
|
|
Translated:Longitude Sides
|
|
|
|
English:Low Precision
|
|
Translated:Low Precision
|
|
|
|
English:Lower / Deploy
|
|
Translated:Lower / Deploy
|
|
|
|
English:Lower extruder
|
|
Translated:Lower extruder
|
|
|
|
English:M117
|
|
Translated:M117
|
|
|
|
English:M73
|
|
Translated:M73
|
|
|
|
English:Machine File (G-Code)
|
|
Translated:Machine File (G-Code)
|
|
|
|
English:Macros
|
|
Translated:Macros
|
|
|
|
English:Maintain Surface
|
|
Translated:Maintain Surface
|
|
|
|
English:Make
|
|
Translated:Make
|
|
|
|
English:Make Component
|
|
Translated:Make Component
|
|
|
|
English:Make MatterControl emulate bed limits and endstops in software and prevent the printer from moving to invalid locations.
|
|
Translated:Make MatterControl emulate bed limits and endstops in software and prevent the printer from moving to invalid locations.
|
|
|
|
English:Make Selection
|
|
Translated:Make Selection
|
|
|
|
English:Make the first layer on top of partial infill use the speed and fan for bridging.
|
|
Translated:Make the first layer on top of partial infill use the speed and fan for bridging.
|
|
|
|
English:Manual Z Calibration complete.
|
|
Translated:Manual Z Calibration complete.
|
|
|
|
English:Manually Configure Connection
|
|
Translated:Manually Configure Connection
|
|
|
|
English:MarchingSquares
|
|
Translated:MarchingSquares
|
|
|
|
English:Markdown Help
|
|
Translated:Markdown Help
|
|
|
|
English:Marlin
|
|
Translated:Marlin
|
|
|
|
English:Material
|
|
Translated:Material
|
|
|
|
English:Material density. Only used for estimating mass in the Layer View.
|
|
Translated:Material density. Only used for estimating mass in the Layer View.
|
|
|
|
English:Material Setting
|
|
Translated:Material Setting
|
|
|
|
English:Materials
|
|
Translated:Materials
|
|
|
|
English:MatterControl
|
|
Translated:MatterControl
|
|
|
|
English:MatterControl cannot connect to your printer because another program on your computer is already connected. Close or disconnect any other 3D printing programs or other programs which access serial ports and try again.
|
|
Translated:MatterControl cannot connect to your printer because another program on your computer is already connected. Close or disconnect any other 3D printing programs or other programs which access serial ports and try again.
|
|
|
|
English:MatterControl Help
|
|
Translated:MatterControl Help
|
|
|
|
English:MatterControl is made possible by the team at MatterHackers and other open source software
|
|
Translated:MatterControl is made possible by the team at MatterHackers and other open source software
|
|
|
|
English:MatterControl will now attempt to auto-detect your printer.
|
|
Translated:MatterControl will now attempt to auto-detect your printer.
|
|
|
|
English:Max Acceleration
|
|
Translated:Max Acceleration
|
|
|
|
English:Max Ratio
|
|
Translated:Max Ratio
|
|
|
|
English:Max Temperature
|
|
Translated:Max Temperature
|
|
|
|
English:Max Velocity
|
|
Translated:Max Velocity
|
|
|
|
English:Maximum Speed
|
|
Translated:Maximum Speed
|
|
|
|
English:Measure the nozzle offset
|
|
Translated:Measure the nozzle offset
|
|
|
|
English:Measure Tool
|
|
Translated:Measure Tool
|
|
|
|
English:Medium Precision
|
|
Translated:Medium Precision
|
|
|
|
English:Merge
|
|
Translated:Merge
|
|
|
|
English:Merge Overlapping Lines
|
|
Translated:Merge Overlapping Lines
|
|
|
|
English:Merge Vertices
|
|
Translated:Merge Vertices
|
|
|
|
English:Mesh
|
|
Translated:Mesh
|
|
|
|
English:Mesh Analysis
|
|
Translated:Mesh Analysis
|
|
|
|
English:middle drag
|
|
Translated:middle drag
|
|
|
|
English:Min Sides Per Rotation
|
|
Translated:Min Sides Per Rotation
|
|
|
|
English:Min Surface Area
|
|
Translated:Min Surface Area
|
|
|
|
English:Minimum Avoid Travel Requiring Retraction
|
|
Translated:Minimum Avoid Travel Requiring Retraction
|
|
|
|
English:Minimum Extrusion Length
|
|
Translated:Minimum Extrusion Length
|
|
|
|
English:Minimum Extrusion Requiring Retraction
|
|
Translated:Minimum Extrusion Requiring Retraction
|
|
|
|
English:Minimum Print Speed
|
|
Translated:Minimum Print Speed
|
|
|
|
English:Minimum Speed
|
|
Translated:Minimum Speed
|
|
|
|
English:Minimum Speed Always
|
|
Translated:Minimum Speed Always
|
|
|
|
English:Mirror
|
|
Translated:Mirror
|
|
|
|
English:Mirror On
|
|
Translated:Mirror On
|
|
|
|
English:Missing
|
|
Translated:Missing
|
|
|
|
English:mm
|
|
Translated:mm
|
|
|
|
English:mm or %
|
|
Translated:mm or %
|
|
|
|
English:mm zero to disable
|
|
Translated:mm zero to disable
|
|
|
|
English:mm/s
|
|
Translated:mm/s
|
|
|
|
English:mm/s or %
|
|
Translated:mm/s or %
|
|
|
|
English:mm/s^2
|
|
Translated:mm/s^2
|
|
|
|
English:mm/s²
|
|
Translated:mm/s²
|
|
|
|
English:Mode
|
|
Translated:Mode
|
|
|
|
English:Model
|
|
Translated:Model
|
|
|
|
English:Model View
|
|
Translated:Model View
|
|
|
|
English:Modify
|
|
Translated:Modify
|
|
|
|
English:Modify T1 speeds during extrusion moves by the ratio or percent.
|
|
Translated:Modify T1 speeds during extrusion moves by the ratio or percent.
|
|
|
|
English:Monotonic Solid Infill
|
|
Translated:Monotonic Solid Infill
|
|
|
|
English:More
|
|
Translated:More
|
|
|
|
English:More Export Options
|
|
Translated:More Export Options
|
|
|
|
English:Mouse
|
|
Translated:Mouse
|
|
|
|
English:Move
|
|
Translated:Move
|
|
|
|
English:Move Direction
|
|
Translated:Move Direction
|
|
|
|
English:Move Item
|
|
Translated:Move Item
|
|
|
|
English:Move Part
|
|
Translated:Move Part
|
|
|
|
English:Move Part Constrained
|
|
Translated:Move Part Constrained
|
|
|
|
English:Move View
|
|
Translated:Move View
|
|
|
|
English:Move X negative
|
|
Translated:Move X negative
|
|
|
|
English:Move X positive
|
|
Translated:Move X positive
|
|
|
|
English:Move Y negative
|
|
Translated:Move Y negative
|
|
|
|
English:Move Y positive
|
|
Translated:Move Y positive
|
|
|
|
English:Move Z negative
|
|
Translated:Move Z negative
|
|
|
|
English:Move Z positive
|
|
Translated:Move Z positive
|
|
|
|
English:Move: Middle Mouse Button | Ctrl + Shift + Left Mouse Button
|
|
Translated:Move: Middle Mouse Button | Ctrl + Shift + Left Mouse Button
|
|
|
|
English:Movement
|
|
Translated:Movement
|
|
|
|
English:Movement Requests
|
|
Translated:Movement Requests
|
|
|
|
English:Movement Speed
|
|
Translated:Movement Speed
|
|
|
|
English:Moves
|
|
Translated:Moves
|
|
|
|
English:Multi-Extruder
|
|
Translated:Multi-Extruder
|
|
|
|
English:My Modified Settings
|
|
Translated:My Modified Settings
|
|
|
|
English:My Modified Settings (Printer)
|
|
Translated:My Modified Settings (Printer)
|
|
|
|
English:name
|
|
Translated:name
|
|
|
|
English:Name
|
|
Translated:Name
|
|
|
|
English:Name To Write
|
|
Translated:Name To Write
|
|
|
|
English:Networked Printing
|
|
Translated:Networked Printing
|
|
|
|
English:New Design
|
|
Translated:New Design
|
|
|
|
English:New Printer Name
|
|
Translated:New Printer Name
|
|
|
|
English:New User?
|
|
Translated:New User?
|
|
|
|
English:Next
|
|
Translated:Next
|
|
|
|
English:No
|
|
Translated:No
|
|
|
|
English:No Color
|
|
Translated:No Color
|
|
|
|
English:No macros are currently set up for this printer.
|
|
Translated:No macros are currently set up for this printer.
|
|
|
|
English:No part to arrange
|
|
Translated:No part to arrange
|
|
|
|
English:No printable parts exists within the bounds of the printer bed. Add content to continue
|
|
Translated:No printable parts exists within the bounds of the printer bed. Add content to continue
|
|
|
|
English:No setting currently need to be updated.
|
|
Translated:No setting currently need to be updated.
|
|
|
|
English:None
|
|
Translated:None
|
|
|
|
English:Non-Manifold
|
|
Translated:Non-Manifold
|
|
|
|
English:Normal Layers
|
|
Translated:Normal Layers
|
|
|
|
English:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
|
|
Translated:Note: Slice Settings are applied before the print actually starts. Changes while printing will not effect the active print.
|
|
|
|
English:NOTE: Standard messaging rates may apply.
|
|
Translated:NOTE: Standard messaging rates may apply.
|
|
|
|
English:Notifications
|
|
Translated:Notifications
|
|
|
|
English:Nozzle
|
|
Translated:Nozzle
|
|
|
|
English:Nozzle 1 Inset
|
|
Translated:Nozzle 1 Inset
|
|
|
|
English:Nozzle 2 Inset
|
|
Translated:Nozzle 2 Inset
|
|
|
|
English:Nozzle Alignment
|
|
Translated:Nozzle Alignment
|
|
|
|
English:Nozzle Diameter
|
|
Translated:Nozzle Diameter
|
|
|
|
English:Nozzle Offsets
|
|
Translated:Nozzle Offsets
|
|
|
|
English:Nozzle Width
|
|
Translated:Nozzle Width
|
|
|
|
English:Num Cells
|
|
Translated:Num Cells
|
|
|
|
English:Number
|
|
Translated:Number
|
|
|
|
English:Number of Samples
|
|
Translated:Number of Samples
|
|
|
|
English:Number Printed
|
|
Translated:Number Printed
|
|
|
|
English:of
|
|
Translated:of
|
|
|
|
English:Off
|
|
Translated:Off
|
|
|
|
English:Offset
|
|
Translated:Offset
|
|
|
|
English:Offset For Next Push
|
|
Translated:Offset For Next Push
|
|
|
|
English:Ok
|
|
Translated:Ok
|
|
|
|
English:OK
|
|
Translated:OK
|
|
|
|
English:'Ok' Responses
|
|
Translated:'Ok' Responses
|
|
|
|
English:On Connect G-Code
|
|
Translated:On Connect G-Code
|
|
|
|
English:Oops! Could not complete update.
|
|
Translated:Oops! Could not complete update.
|
|
|
|
English:Oops! Field cannot be left blank
|
|
Translated:Oops! Field cannot be left blank
|
|
|
|
English:Open
|
|
Translated:Open
|
|
|
|
English:Open a copy
|
|
Translated:Open a copy
|
|
|
|
English:Open File
|
|
Translated:Open File
|
|
|
|
English:Open Folder
|
|
Translated:Open Folder
|
|
|
|
English:Open Package
|
|
Translated:Open Package
|
|
|
|
English:Open Recent
|
|
Translated:Open Recent
|
|
|
|
English:Open Settings View Options
|
|
Translated:Open Settings View Options
|
|
|
|
English:Optional
|
|
Translated:Optional
|
|
|
|
English:Options
|
|
Translated:Options
|
|
|
|
English:or
|
|
Translated:or
|
|
|
|
English:Other Speeds
|
|
Translated:Other Speeds
|
|
|
|
English:Outer Diameter
|
|
Translated:Outer Diameter
|
|
|
|
English:Outer Edge Width
|
|
Translated:Outer Edge Width
|
|
|
|
English:Outer Style
|
|
Translated:Outer Style
|
|
|
|
English:Outline Path
|
|
Translated:Outline Path
|
|
|
|
English:Outline Width
|
|
Translated:Outline Width
|
|
|
|
English:Outlines (default)
|
|
Translated:Outlines (default)
|
|
|
|
English:Output only the first layer of the print. Especially useful for outputting gcode data for applications like engraving or cutting.
|
|
Translated:Output only the first layer of the print. Especially useful for outputting gcode data for applications like engraving or cutting.
|
|
|
|
English:Output Resolution
|
|
Translated:Output Resolution
|
|
|
|
English:Outside Perimeter
|
|
Translated:Outside Perimeter
|
|
|
|
English:Outside Perimeters
|
|
Translated:Outside Perimeters
|
|
|
|
English:Overhang
|
|
Translated:Overhang
|
|
|
|
English:Overhang Angle
|
|
Translated:Overhang Angle
|
|
|
|
English:Override Radius
|
|
Translated:Override Radius
|
|
|
|
English:Overview
|
|
Translated:Overview
|
|
|
|
English:Pan
|
|
Translated:Pan
|
|
|
|
English:Pan View
|
|
Translated:Pan View
|
|
|
|
English:Part Cooling Fan
|
|
Translated:Part Cooling Fan
|
|
|
|
English:Part(s) to Subtract
|
|
Translated:Part(s) to Subtract
|
|
|
|
English:Part(s) to Subtract and Replace
|
|
Translated:Part(s) to Subtract and Replace
|
|
|
|
English:Parts
|
|
Translated:Parts
|
|
|
|
English:Password
|
|
Translated:Password
|
|
|
|
English:Paste
|
|
Translated:Paste
|
|
|
|
English:Path
|
|
Translated:Path
|
|
|
|
English:Pattern Spacing
|
|
Translated:Pattern Spacing
|
|
|
|
English:Pause
|
|
Translated:Pause
|
|
|
|
English:Pause automatic heater shutdown
|
|
Translated:Pause automatic heater shutdown
|
|
|
|
English:Pause G-Code
|
|
Translated:Pause G-Code
|
|
|
|
English:Pause Print
|
|
Translated:Pause Print
|
|
|
|
English:PEI
|
|
Translated:PEI
|
|
|
|
English:PEI Bed Temperature
|
|
Translated:PEI Bed Temperature
|
|
|
|
English:Percentage of
|
|
Translated:Percentage of
|
|
|
|
English:Perimeter Acceleration
|
|
Translated:Perimeter Acceleration
|
|
|
|
English:Perimeter Speeds
|
|
Translated:Perimeter Speeds
|
|
|
|
English:Perimeters
|
|
Translated:Perimeters
|
|
|
|
English:Perimeters Per Extruder
|
|
Translated:Perimeters Per Extruder
|
|
|
|
English:PETG Temperature Tower
|
|
Translated:PETG Temperature Tower
|
|
|
|
English:Pillar Size
|
|
Translated:Pillar Size
|
|
|
|
English:Pin
|
|
Translated:Pin
|
|
|
|
English:Pinch
|
|
Translated:Pinch
|
|
|
|
English:Pipe Works
|
|
Translated:Pipe Works
|
|
|
|
English:Pitch
|
|
Translated:Pitch
|
|
|
|
English:Pitch Radius
|
|
Translated:Pitch Radius
|
|
|
|
English:Pixels Per mm
|
|
Translated:Pixels Per mm
|
|
|
|
English:PLA Temperature Tower
|
|
Translated:PLA Temperature Tower
|
|
|
|
English:Place the paper under the extruder
|
|
Translated:Place the paper under the extruder
|
|
|
|
English:Placement
|
|
Translated:Placement
|
|
|
|
English:Plane Cut
|
|
Translated:Plane Cut
|
|
|
|
English:Plating and settings changes can be applied
|
|
Translated:Plating and settings changes can be applied
|
|
|
|
English:Plating History
|
|
Translated:Plating History
|
|
|
|
English:Play a Sound
|
|
Translated:Play a Sound
|
|
|
|
English:Play a sound for notifications
|
|
Translated:Play a sound for notifications
|
|
|
|
English:Please Confirm
|
|
Translated:Please Confirm
|
|
|
|
English:Please select a writable folder
|
|
Translated:Please select a writable folder
|
|
|
|
English:Please select the material you want to load into extruder {0}.
|
|
Translated:Please select the material you want to load into extruder {0}.
|
|
|
|
English:Please select the material you want to load.
|
|
Translated:Please select the material you want to load.
|
|
|
|
English:Please select the material you want to unload.
|
|
Translated:Please select the material you want to unload.
|
|
|
|
English:Please sign in to continue.
|
|
Translated:Please sign in to continue.
|
|
|
|
English:Please wait while we create your account...
|
|
Translated:Please wait while we create your account...
|
|
|
|
English:Please wait. Retrieving share code...
|
|
Translated:Please wait. Retrieving share code...
|
|
|
|
English:Please wait. Signing in...
|
|
Translated:Please wait. Signing in...
|
|
|
|
English:Plug in printer USB cable and turn printer on
|
|
Translated:Plug in printer USB cable and turn printer on
|
|
|
|
English:Plugins
|
|
Translated:Plugins
|
|
|
|
English:Point Size
|
|
Translated:Point Size
|
|
|
|
English:Polygons
|
|
Translated:Polygons
|
|
|
|
English:Polypropylene
|
|
Translated:Polypropylene
|
|
|
|
English:Polypropylene Bed Temperature
|
|
Translated:Polypropylene Bed Temperature
|
|
|
|
English:Port In Use
|
|
Translated:Port In Use
|
|
|
|
English:Port not available
|
|
Translated:Port not available
|
|
|
|
English:Port Wizard
|
|
Translated:Port Wizard
|
|
|
|
English:Position
|
|
Translated:Position
|
|
|
|
English:Possible Unsupported Parts Detected
|
|
Translated:Possible Unsupported Parts Detected
|
|
|
|
English:Prefered Radius
|
|
Translated:Prefered Radius
|
|
|
|
English:Preheat
|
|
Translated:Preheat
|
|
|
|
English:Preparing To Print
|
|
Translated:Preparing To Print
|
|
|
|
English:Press
|
|
Translated:Press
|
|
|
|
English:Press [Z-] until there is resistance to moving the paper
|
|
Translated:Press [Z-] until there is resistance to moving the paper
|
|
|
|
English:Press [Z+] once to release the paper
|
|
Translated:Press [Z+] once to release the paper
|
|
|
|
English:Pressure Angle
|
|
Translated:Pressure Angle
|
|
|
|
English:Prev
|
|
Translated:Prev
|
|
|
|
English:Primitive Shapes
|
|
Translated:Primitive Shapes
|
|
|
|
English:Primitives
|
|
Translated:Primitives
|
|
|
|
English:Primitives 2D
|
|
Translated:Primitives 2D
|
|
|
|
English:Print
|
|
Translated:Print
|
|
|
|
English:Print Canceled
|
|
Translated:Print Canceled
|
|
|
|
English:Print Center
|
|
Translated:Print Center
|
|
|
|
English:Print Complete
|
|
Translated:Print Complete
|
|
|
|
English:Print Delay
|
|
Translated:Print Delay
|
|
|
|
English:Print History
|
|
Translated:Print History
|
|
|
|
English:Print Leveling
|
|
Translated:Print Leveling
|
|
|
|
English:Print Leveling is an optional feature for this printer that can help improve print quality. If the bed is uneven or cannot be mechanically leveled.
|
|
Translated:Print Leveling is an optional feature for this printer that can help improve print quality. If the bed is uneven or cannot be mechanically leveled.
|
|
|
|
English:Print Leveling measures the plane of the bed.
|
|
Translated:Print Leveling measures the plane of the bed.
|
|
|
|
English:Print Leveling will run automatically at the start of each print.
|
|
Translated:Print Leveling will run automatically at the start of each print.
|
|
|
|
English:Print Leveling Wizard
|
|
Translated:Print Leveling Wizard
|
|
|
|
English:Print Notification Settings
|
|
Translated:Print Notification Settings
|
|
|
|
English:Print Priming Object
|
|
Translated:Print Priming Object
|
|
|
|
English:Print Quality
|
|
Translated:Print Quality
|
|
|
|
English:Print Queue
|
|
Translated:Print Queue
|
|
|
|
English:Print Recovery
|
|
Translated:Print Recovery
|
|
|
|
English:Print Time
|
|
Translated:Print Time
|
|
|
|
English:Printed Files
|
|
Translated:Printed Files
|
|
|
|
English:Printer
|
|
Translated:Printer
|
|
|
|
English:Printer Advanced
|
|
Translated:Printer Advanced
|
|
|
|
English:Printer Calibration
|
|
Translated:Printer Calibration
|
|
|
|
English:Printer Control
|
|
Translated:Printer Control
|
|
|
|
English:Printer Default
|
|
Translated:Printer Default
|
|
|
|
English:Printer Disconnected
|
|
Translated:Printer Disconnected
|
|
|
|
English:Printer Help
|
|
Translated:Printer Help
|
|
|
|
English:Printer Name
|
|
Translated:Printer Name
|
|
|
|
English:Printer Options
|
|
Translated:Printer Options
|
|
|
|
English:Printer Paused
|
|
Translated:Printer Paused
|
|
|
|
English:Printer Setup
|
|
Translated:Printer Setup
|
|
|
|
English:Printer Setup & Calibration
|
|
Translated:Printer Setup & Calibration
|
|
|
|
English:Printer Setup must be run before printing
|
|
Translated:Printer Setup must be run before printing
|
|
|
|
English:Printer Setup Required
|
|
Translated:Printer Setup Required
|
|
|
|
English:Printers
|
|
Translated:Printers
|
|
|
|
English:Printers to Copy
|
|
Translated:Printers to Copy
|
|
|
|
English:Printing
|
|
Translated:Printing
|
|
|
|
English:Printing: {0}
|
|
Translated:Printing: {0}
|
|
|
|
English:Prints To Run
|
|
Translated:Prints To Run
|
|
|
|
English:Pro Only
|
|
Translated:Pro Only
|
|
|
|
English:Pro Tools
|
|
Translated:Pro Tools
|
|
|
|
English:Probe
|
|
Translated:Probe
|
|
|
|
English:Probe at bed center
|
|
Translated:Probe at bed center
|
|
|
|
English:Probe Offset
|
|
Translated:Probe Offset
|
|
|
|
English:Processing
|
|
Translated:Processing
|
|
|
|
English:Progress Reporting
|
|
Translated:Progress Reporting
|
|
|
|
English:Properties
|
|
Translated:Properties
|
|
|
|
English:Provide this code to grant someone read-only access.
|
|
Translated:Provide this code to grant someone read-only access.
|
|
|
|
English:Purchased
|
|
Translated:Purchased
|
|
|
|
English:Push Direction
|
|
Translated:Push Direction
|
|
|
|
English:Push Speed
|
|
Translated:Push Speed
|
|
|
|
English:Push With Hotend
|
|
Translated:Push With Hotend
|
|
|
|
English:Pyramid
|
|
Translated:Pyramid
|
|
|
|
English:Quality
|
|
Translated:Quality
|
|
|
|
English:Quality Setting
|
|
Translated:Quality Setting
|
|
|
|
English:Radial Array
|
|
Translated:Radial Array
|
|
|
|
English:Radius
|
|
Translated:Radius
|
|
|
|
English:Raft
|
|
Translated:Raft
|
|
|
|
English:Raft Extruder
|
|
Translated:Raft Extruder
|
|
|
|
English:Raise / Stow
|
|
Translated:Raise / Stow
|
|
|
|
English:Raise extruder
|
|
Translated:Raise extruder
|
|
|
|
English:Randomized
|
|
Translated:Randomized
|
|
|
|
English:Ratio
|
|
Translated:Ratio
|
|
|
|
English:Ratio or %
|
|
Translated:Ratio or %
|
|
|
|
English:Read Filter
|
|
Translated:Read Filter
|
|
|
|
English:ReadFromPrinter thread created.
|
|
Translated:ReadFromPrinter thread created.
|
|
|
|
English:Reboots the firmware on the controller
|
|
Translated:Reboots the firmware on the controller
|
|
|
|
English:Recover Last Print
|
|
Translated:Recover Last Print
|
|
|
|
English:Recover Layer Speed
|
|
Translated:Recover Layer Speed
|
|
|
|
English:Recover Print
|
|
Translated:Recover Print
|
|
|
|
English:recovered once
|
|
Translated:recovered once
|
|
|
|
English:Recovered printer profile
|
|
Translated:Recovered printer profile
|
|
|
|
English:rectangular
|
|
Translated:rectangular
|
|
|
|
English:Redo
|
|
Translated:Redo
|
|
|
|
English:Reduce
|
|
Translated:Reduce
|
|
|
|
English:Reduced Width
|
|
Translated:Reduced Width
|
|
|
|
English:Re-enter Password
|
|
Translated:Re-enter Password
|
|
|
|
English:Refresh
|
|
Translated:Refresh
|
|
|
|
English:Refresh Folder
|
|
Translated:Refresh Folder
|
|
|
|
English:Release
|
|
Translated:Release
|
|
|
|
English:Release Notes
|
|
Translated:Release Notes
|
|
|
|
English:Reloading
|
|
Translated:Reloading
|
|
|
|
English:Remove
|
|
Translated:Remove
|
|
|
|
English:Remove all auto generated supports
|
|
Translated:Remove all auto generated supports
|
|
|
|
English:Remove Items?
|
|
Translated:Remove Items?
|
|
|
|
English:Remove Mode
|
|
Translated:Remove Mode
|
|
|
|
English:Remove Subtract Objects
|
|
Translated:Remove Subtract Objects
|
|
|
|
English:Remove the paper
|
|
Translated:Remove the paper
|
|
|
|
English:Rename
|
|
Translated:Rename
|
|
|
|
English:Rename Item
|
|
Translated:Rename Item
|
|
|
|
English:Render As Braille
|
|
Translated:Render As Braille
|
|
|
|
English:Render Leveling Data on the bed
|
|
Translated:Render Leveling Data on the bed
|
|
|
|
English:Repair
|
|
Translated:Repair
|
|
|
|
English:Replacing
|
|
Translated:Replacing
|
|
|
|
English:Report a Bug
|
|
Translated:Report a Bug
|
|
|
|
English:Require Leveling To Print
|
|
Translated:Require Leveling To Print
|
|
|
|
English:Required
|
|
Translated:Required
|
|
|
|
English:Reset
|
|
Translated:Reset
|
|
|
|
English:Reset Long Extrusion
|
|
Translated:Reset Long Extrusion
|
|
|
|
English:Reset the line ends back to their starting positions
|
|
Translated:Reset the line ends back to their starting positions
|
|
|
|
English:Reset the position
|
|
Translated:Reset the position
|
|
|
|
English:Reset to Defaults...
|
|
Translated:Reset to Defaults...
|
|
|
|
English:Reset View
|
|
Translated:Reset View
|
|
|
|
English:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
|
|
Translated:Resetting to default values will remove your current overrides and restore your original printer settings.\nAre you sure you want to continue?
|
|
|
|
English:Reshape
|
|
Translated:Reshape
|
|
|
|
English:Resources
|
|
Translated:Resources
|
|
|
|
English:Restore Default
|
|
Translated:Restore Default
|
|
|
|
English:Restore Settings...
|
|
Translated:Restore Settings...
|
|
|
|
English:Resume
|
|
Translated:Resume
|
|
|
|
English:Resume automatic heater shutdown
|
|
Translated:Resume automatic heater shutdown
|
|
|
|
English:Resume G-Code
|
|
Translated:Resume G-Code
|
|
|
|
English:Resume Print
|
|
Translated:Resume Print
|
|
|
|
English:Retract
|
|
Translated:Retract
|
|
|
|
English:Retract filament
|
|
Translated:Retract filament
|
|
|
|
English:Retract Length
|
|
Translated:Retract Length
|
|
|
|
English:Retract When Changing Islands
|
|
Translated:Retract When Changing Islands
|
|
|
|
English:Retraction
|
|
Translated:Retraction
|
|
|
|
English:Retractions
|
|
Translated:Retractions
|
|
|
|
English:Retrieving sync information...
|
|
Translated:Retrieving sync information...
|
|
|
|
English:Retry Login
|
|
Translated:Retry Login
|
|
|
|
English:Revert
|
|
Translated:Revert
|
|
|
|
English:Revert Settings
|
|
Translated:Revert Settings
|
|
|
|
English:Revolve
|
|
Translated:Revolve
|
|
|
|
English:Right
|
|
Translated:Right
|
|
|
|
English:Right Arrow
|
|
Translated:Right Arrow
|
|
|
|
English:right drag
|
|
Translated:right drag
|
|
|
|
English:Right Inset
|
|
Translated:Right Inset
|
|
|
|
English:Ring
|
|
Translated:Ring
|
|
|
|
English:Ring Phase Angle
|
|
Translated:Ring Phase Angle
|
|
|
|
English:Ring Sides
|
|
Translated:Ring Sides
|
|
|
|
English:Rotate
|
|
Translated:Rotate
|
|
|
|
English:Rotate About
|
|
Translated:Rotate About
|
|
|
|
English:Rotate Part
|
|
Translated:Rotate Part
|
|
|
|
English:Rotate View
|
|
Translated:Rotate View
|
|
|
|
English:Rotate: Right Mouse Button | Ctrl + Left Mouse Button
|
|
Translated:Rotate: Right Mouse Button | Ctrl + Left Mouse Button
|
|
|
|
English:Rotation Distance
|
|
Translated:Rotation Distance
|
|
|
|
English:Rotation Offset
|
|
Translated:Rotation Offset
|
|
|
|
English:Rotation Slices
|
|
Translated:Rotation Slices
|
|
|
|
English:Rotations
|
|
Translated:Rotations
|
|
|
|
English:Round
|
|
Translated:Round
|
|
|
|
English:Round Segments
|
|
Translated:Round Segments
|
|
|
|
English:Rubber Band Selection
|
|
Translated:Rubber Band Selection
|
|
|
|
English:Run Calibration
|
|
Translated:Run Calibration
|
|
|
|
English:Run Max if Below
|
|
Translated:Run Max if Below
|
|
|
|
English:Run Nozzle Alignment
|
|
Translated:Run Nozzle Alignment
|
|
|
|
English:Run Print Leveling
|
|
Translated:Run Print Leveling
|
|
|
|
English:Run Z Calibration
|
|
Translated:Run Z Calibration
|
|
|
|
English:Runout Check Distance
|
|
Translated:Runout Check Distance
|
|
|
|
English:Runout Trigger Ratio
|
|
Translated:Runout Trigger Ratio
|
|
|
|
English:s
|
|
Translated:s
|
|
|
|
English:Sailfish Communication
|
|
Translated:Sailfish Communication
|
|
|
|
English:Sample the bed center position to determine the probe distance to the bed
|
|
Translated:Sample the bed center position to determine the probe distance to the bed
|
|
|
|
English:Save
|
|
Translated:Save
|
|
|
|
English:Save As
|
|
Translated:Save As
|
|
|
|
English:Save Changes
|
|
Translated:Save Changes
|
|
|
|
English:Save changes ?
|
|
Translated:Save changes ?
|
|
|
|
English:Save Changes?
|
|
Translated:Save Changes?
|
|
|
|
English:Save New Design
|
|
Translated:Save New Design
|
|
|
|
English:Saving
|
|
Translated:Saving
|
|
|
|
English:Saving Asset
|
|
Translated:Saving Asset
|
|
|
|
English:Saving Changes
|
|
Translated:Saving Changes
|
|
|
|
English:SCAD Script
|
|
Translated:SCAD Script
|
|
|
|
English:Scale
|
|
Translated:Scale
|
|
|
|
English:Scale Offset
|
|
Translated:Scale Offset
|
|
|
|
English:Scale Type
|
|
Translated:Scale Type
|
|
|
|
English:SD Card
|
|
Translated:SD Card
|
|
|
|
English:Seam Placement
|
|
Translated:Seam Placement
|
|
|
|
English:Search
|
|
Translated:Search
|
|
|
|
English:Search Results
|
|
Translated:Search Results
|
|
|
|
English:seconds
|
|
Translated:seconds
|
|
|
|
English:Sections
|
|
Translated:Sections
|
|
|
|
English:Select
|
|
Translated:Select
|
|
|
|
English:Select a new Destination
|
|
Translated:Select a new Destination
|
|
|
|
English:Select a printer to continue
|
|
Translated:Select a printer to continue
|
|
|
|
English:Select cell to edit
|
|
Translated:Select cell to edit
|
|
|
|
English:Select Parts
|
|
Translated:Select Parts
|
|
|
|
English:Select Printer
|
|
Translated:Select Printer
|
|
|
|
English:Select Range
|
|
Translated:Select Range
|
|
|
|
English:Select this option only if your printer does not appear in the list
|
|
Translated:Select this option only if your printer does not appear in the list
|
|
|
|
English:Selected Object Options
|
|
Translated:Selected Object Options
|
|
|
|
English:Selection
|
|
Translated:Selection
|
|
|
|
English:Send
|
|
Translated:Send
|
|
|
|
English:Send email notifications
|
|
Translated:Send email notifications
|
|
|
|
English:Send SMS notifications
|
|
Translated:Send SMS notifications
|
|
|
|
English:Send With Checksum
|
|
Translated:Send With Checksum
|
|
|
|
English:Serial Port
|
|
Translated:Serial Port
|
|
|
|
English:Serial port in use
|
|
Translated:Serial port in use
|
|
|
|
English:Services
|
|
Translated:Services
|
|
|
|
English:Session Cleared
|
|
Translated:Session Cleared
|
|
|
|
English:Session Expired
|
|
Translated:Session Expired
|
|
|
|
English:Set Temperature
|
|
Translated:Set Temperature
|
|
|
|
English:Set the information below to configure your printer. After completing this step, you can customize additional settings under the 'Settings' and 'Printer' options for this printer.
|
|
Translated:Set the information below to configure your printer. After completing this step, you can customize additional settings under the 'Settings' and 'Printer' options for this printer.
|
|
|
|
English:Sets MatterControl to attempt to connect to a printer over the network. (You must disconnect and reconnect for this to take effect)
|
|
Translated:Sets MatterControl to attempt to connect to a printer over the network. (You must disconnect and reconnect for this to take effect)
|
|
|
|
English:Sets MatterControl to use s3g communication method. (You must disconnect and reconnect for this to take effect)
|
|
Translated:Sets MatterControl to use s3g communication method. (You must disconnect and reconnect for this to take effect)
|
|
|
|
English:Setting Name
|
|
Translated:Setting Name
|
|
|
|
English:Settings
|
|
Translated:Settings
|
|
|
|
English:Settings Update Available
|
|
Translated:Settings Update Available
|
|
|
|
English:Settings View Options
|
|
Translated:Settings View Options
|
|
|
|
English:Setup
|
|
Translated:Setup
|
|
|
|
English:Setup Needs to be Run
|
|
Translated:Setup Needs to be Run
|
|
|
|
English:Setup New Printer
|
|
Translated:Setup New Printer
|
|
|
|
English:Setup New Pulse
|
|
Translated:Setup New Pulse
|
|
|
|
English:Setup Printer
|
|
Translated:Setup Printer
|
|
|
|
English:Setup Pulse
|
|
Translated:Setup Pulse
|
|
|
|
English:Setup Wizard
|
|
Translated:Setup Wizard
|
|
|
|
English:Shaded
|
|
Translated:Shaded
|
|
|
|
English:Shape
|
|
Translated:Shape
|
|
|
|
English:Share
|
|
Translated:Share
|
|
|
|
English:Share Code
|
|
Translated:Share Code
|
|
|
|
English:Share Library Item
|
|
Translated:Share Library Item
|
|
|
|
English:Share Options
|
|
Translated:Share Options
|
|
|
|
English:Share Temperature
|
|
Translated:Share Temperature
|
|
|
|
English:Share with someone
|
|
Translated:Share with someone
|
|
|
|
English:Shared with Me
|
|
Translated:Shared with Me
|
|
|
|
English:Shop
|
|
Translated:Shop
|
|
|
|
English:Shop Filament at MatterHackers
|
|
Translated:Shop Filament at MatterHackers
|
|
|
|
English:Show all settings that are not the printer default
|
|
Translated:Show all settings that are not the printer default
|
|
|
|
English:Show Controls
|
|
Translated:Show Controls
|
|
|
|
English:Show file in folder after save
|
|
Translated:Show file in folder after save
|
|
|
|
English:Show Firmware Updater
|
|
Translated:Show Firmware Updater
|
|
|
|
English:Show Help
|
|
Translated:Show Help
|
|
|
|
English:Show in Explorer
|
|
Translated:Show in Explorer
|
|
|
|
English:Show Materials
|
|
Translated:Show Materials
|
|
|
|
English:Show Password
|
|
Translated:Show Password
|
|
|
|
English:Show Print Area
|
|
Translated:Show Print Area
|
|
|
|
English:Show Print Bed
|
|
Translated:Show Print Bed
|
|
|
|
English:Show Printer
|
|
Translated:Show Printer
|
|
|
|
English:Show Ratings Dialog After Print
|
|
Translated:Show Ratings Dialog After Print
|
|
|
|
English:Show Reset Connection
|
|
Translated:Show Reset Connection
|
|
|
|
English:Show Speeds
|
|
Translated:Show Speeds
|
|
|
|
English:Show Terminal
|
|
Translated:Show Terminal
|
|
|
|
English:Show Welcome Message
|
|
Translated:Show Welcome Message
|
|
|
|
English:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
|
|
Translated:Shows a button at the right side of the Printer Connection Bar used to reset the USB connection to the printer. This can be used on printers that support it as an emergency stop.
|
|
|
|
English:Sides
|
|
Translated:Sides
|
|
|
|
English:sign in
|
|
Translated:sign in
|
|
|
|
English:Sign in
|
|
Translated:Sign in
|
|
|
|
English:Sign in to access your existing printers
|
|
Translated:Sign in to access your existing printers
|
|
|
|
English:Sign in to my account
|
|
Translated:Sign in to my account
|
|
|
|
English:Sign in to your MatterControl account
|
|
Translated:Sign in to your MatterControl account
|
|
|
|
English:Sign Out
|
|
Translated:Sign Out
|
|
|
|
English:Sign Out?
|
|
Translated:Sign Out?
|
|
|
|
English:Sign Up for an Account
|
|
Translated:Sign Up for an Account
|
|
|
|
English:Simple
|
|
Translated:Simple
|
|
|
|
English:Simple Arduino
|
|
Translated:Simple Arduino
|
|
|
|
English:Size
|
|
Translated:Size
|
|
|
|
English:Skip
|
|
Translated:Skip
|
|
|
|
English:Skip Connection Setup
|
|
Translated:Skip Connection Setup
|
|
|
|
English:Skirt
|
|
Translated:Skirt
|
|
|
|
English:Slice
|
|
Translated:Slice
|
|
|
|
English:Slice Advanced
|
|
Translated:Slice Advanced
|
|
|
|
English:Slice Engine
|
|
Translated:Slice Engine
|
|
|
|
English:Slice Height
|
|
Translated:Slice Height
|
|
|
|
English:Slice Presets Editor
|
|
Translated:Slice Presets Editor
|
|
|
|
English:Slice Settings
|
|
Translated:Slice Settings
|
|
|
|
English:Slicing
|
|
Translated:Slicing
|
|
|
|
English:Slicing Item
|
|
Translated:Slicing Item
|
|
|
|
English:Slow Down If Layer Print Time Is Below
|
|
Translated:Slow Down If Layer Print Time Is Below
|
|
|
|
English:Smooth Distance
|
|
Translated:Smooth Distance
|
|
|
|
English:Smooth Path
|
|
Translated:Smooth Path
|
|
|
|
English:Smoothie
|
|
Translated:Smoothie
|
|
|
|
English:Snap Grid
|
|
Translated:Snap Grid
|
|
|
|
English:Snapping Turned Off
|
|
Translated:Snapping Turned Off
|
|
|
|
English:Some parts may require support structures to print correctly
|
|
Translated:Some parts may require support structures to print correctly
|
|
|
|
English:Sorting
|
|
Translated:Sorting
|
|
|
|
English:Source
|
|
Translated:Source
|
|
|
|
English:Source Polygon Count
|
|
Translated:Source Polygon Count
|
|
|
|
English:Specifies that the firmware has support for ros_0 endstop reporting on M119. TRIGGERED state defines filament has runout. If runout is detected the printers pause G-Code is run.
|
|
Translated:Specifies that the firmware has support for ros_0 endstop reporting on M119. TRIGGERED state defines filament has runout. If runout is detected the printers pause G-Code is run.
|
|
|
|
English:Speed
|
|
Translated:Speed
|
|
|
|
English:Speed Multiplier
|
|
Translated:Speed Multiplier
|
|
|
|
English:Speeds
|
|
Translated:Speeds
|
|
|
|
English:Sphere
|
|
Translated:Sphere
|
|
|
|
English:Spiral Vase
|
|
Translated:Spiral Vase
|
|
|
|
English:Split
|
|
Translated:Split
|
|
|
|
English:Split Mesh
|
|
Translated:Split Mesh
|
|
|
|
English:Start
|
|
Translated:Start
|
|
|
|
English:Start End Overlap
|
|
Translated:Start End Overlap
|
|
|
|
English:Start G-Code
|
|
Translated:Start G-Code
|
|
|
|
English:Start Height
|
|
Translated:Start Height
|
|
|
|
English:Start Height Percent
|
|
Translated:Start Height Percent
|
|
|
|
English:Start New Design
|
|
Translated:Start New Design
|
|
|
|
English:Start Percent
|
|
Translated:Start Percent
|
|
|
|
English:Start Print
|
|
Translated:Start Print
|
|
|
|
English:Start Printing
|
|
Translated:Start Printing
|
|
|
|
English:Start printing the current bed.
|
|
Translated:Start printing the current bed.
|
|
|
|
English:Start the printer(s) that are ready to print.
|
|
Translated:Start the printer(s) that are ready to print.
|
|
|
|
English:Starting Angle
|
|
Translated:Starting Angle
|
|
|
|
English:Starting Sync
|
|
Translated:Starting Sync
|
|
|
|
English:Stay Connected
|
|
Translated:Stay Connected
|
|
|
|
English:Step
|
|
Translated:Step
|
|
|
|
English:STL File
|
|
Translated:STL File
|
|
|
|
English:Stop
|
|
Translated:Stop
|
|
|
|
English:Stop trying to connect to the printer.
|
|
Translated:Stop trying to connect to the printer.
|
|
|
|
English:Stretch X
|
|
Translated:Stretch X
|
|
|
|
English:Stretch Y
|
|
Translated:Stretch Y
|
|
|
|
English:Stretch Z
|
|
Translated:Stretch Z
|
|
|
|
English:Style
|
|
Translated:Style
|
|
|
|
English:Subtract
|
|
Translated:Subtract
|
|
|
|
English:Subtract & Replace
|
|
Translated:Subtract & Replace
|
|
|
|
English:Success! Your account has been created.
|
|
Translated:Success! Your account has been created.
|
|
|
|
English:Support
|
|
Translated:Support
|
|
|
|
English:Support Interface Extruder
|
|
Translated:Support Interface Extruder
|
|
|
|
English:Support Material
|
|
Translated:Support Material
|
|
|
|
English:Support Material Extruder
|
|
Translated:Support Material Extruder
|
|
|
|
English:Support Type
|
|
Translated:Support Type
|
|
|
|
English:Surfaced Editors
|
|
Translated:Surfaced Editors
|
|
|
|
English:Switch
|
|
Translated:Switch
|
|
|
|
English:Switch to new G-Code on next layer?
|
|
Translated:Switch to new G-Code on next layer?
|
|
|
|
English:Switch to new G-Code?\n\nBefore you switch, check that you are seeing the changes you expect.
|
|
Translated:Switch to new G-Code?\n\nBefore you switch, check that you are seeing the changes you expect.
|
|
|
|
English:Sync Complete
|
|
Translated:Sync Complete
|
|
|
|
English:Sync Dashboard
|
|
Translated:Sync Dashboard
|
|
|
|
English:Sync Printers
|
|
Translated:Sync Printers
|
|
|
|
English:Sync To Print
|
|
Translated:Sync To Print
|
|
|
|
English:Syncing Printer Profiles...
|
|
Translated:Syncing Printer Profiles...
|
|
|
|
English:Target Count
|
|
Translated:Target Count
|
|
|
|
English:Target Percent
|
|
Translated:Target Percent
|
|
|
|
English:Tee
|
|
Translated:Tee
|
|
|
|
English:Temperature
|
|
Translated:Temperature
|
|
|
|
English:Temperature Requests
|
|
Translated:Temperature Requests
|
|
|
|
English:Temperature Responses
|
|
Translated:Temperature Responses
|
|
|
|
English:Temperature Tower
|
|
Translated:Temperature Tower
|
|
|
|
English:Terminal
|
|
Translated:Terminal
|
|
|
|
English:Terrible
|
|
Translated:Terrible
|
|
|
|
English:Text
|
|
Translated:Text
|
|
|
|
English:Text Size
|
|
Translated:Text Size
|
|
|
|
English:Text2
|
|
Translated:Text2
|
|
|
|
English:The {0} must be greater than 0.
|
|
Translated:The {0} must be greater than 0.
|
|
|
|
English:The acceleration that the printer will be set to by default, will not be changed if set to 0. A typical default acceleration is 1500.
|
|
Translated:The acceleration that the printer will be set to by default, will not be changed if set to 0. A typical default acceleration is 1500.
|
|
|
|
English:The acceleration that the printer will be set to for perimeters, will not be changed if set to 0. A typical perimeter acceleration is 800.
|
|
Translated:The acceleration that the printer will be set to for perimeters, will not be changed if set to 0. A typical perimeter acceleration is 800.
|
|
|
|
English:The actual diameter of the filament used for printing.
|
|
Translated:The actual diameter of the filament used for printing.
|
|
|
|
English:The amount of filament to insert into the printer when loading.
|
|
Translated:The amount of filament to insert into the printer when loading.
|
|
|
|
English:The amount of filament to remove from the printer while unloading.
|
|
Translated:The amount of filament to remove from the printer while unloading.
|
|
|
|
English:The amount of infill material to generate, expressed as a ratio or a percentage.
|
|
Translated:The amount of infill material to generate, expressed as a ratio or a percentage.
|
|
|
|
English:The amount the infill edge will push into the perimeter. Helps ensure the infill is connected to the edge. This can be expressed as a percentage of the Nozzle Diameter.
|
|
Translated:The amount the infill edge will push into the perimeter. Helps ensure the infill is connected to the edge. This can be expressed as a percentage of the Nozzle Diameter.
|
|
|
|
English:The amount to lower the temperature when the hotend is inactive.
|
|
Translated:The amount to lower the temperature when the hotend is inactive.
|
|
|
|
English:The angle at which the support material lines will be drawn.
|
|
Translated:The angle at which the support material lines will be drawn.
|
|
|
|
English:The angle of the infill, measured from the X axis. Not used when bridging.
|
|
Translated:The angle of the infill, measured from the X axis. Not used when bridging.
|
|
|
|
English:The angle to generate support for
|
|
Translated:The angle to generate support for
|
|
|
|
English:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
|
|
Translated:The bed is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting bed temperature in SETTINGS -> Filament -> Temperatures.\n\n{1}
|
|
|
|
English:The color of the first material.
|
|
Translated:The color of the first material.
|
|
|
|
English:The color of the second material (extruder 2).
|
|
Translated:The color of the second material (extruder 2).
|
|
|
|
English:The current bed surfaces that the printer is using. This is used to set the correct bed temperature for a given material.
|
|
Translated:The current bed surfaces that the printer is using. This is used to set the correct bed temperature for a given material.
|
|
|
|
English:The date this file was originally created.
|
|
Translated:The date this file was originally created.
|
|
|
|
English:The default settings for this printer have changed and can be updated
|
|
Translated:The default settings for this printer have changed and can be updated
|
|
|
|
English:The deviation from the last measured value allowed without re-calculating the leveling solution.
|
|
Translated:The deviation from the last measured value allowed without re-calculating the leveling solution.
|
|
|
|
English:The diameter of the extruder's nozzle.
|
|
Translated:The diameter of the extruder's nozzle.
|
|
|
|
English:The distance between support material lines.
|
|
Translated:The distance between support material lines.
|
|
|
|
English:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
|
|
Translated:The distance between the top of the raft and the bottom of the model. 0.6 mm is a good starting point for PLA and 0.4 mm is a good starting point for ABS. Lower values give a smoother surface, higher values make the print easier to remove.
|
|
|
|
English:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
|
|
Translated:The distance between the top of the support and the bottom of the model. A good value depends on the type of material. For ABS and PLA a value between 0.4 and 0.6 works well, respectively.
|
|
|
|
English:The distance filament will reverse before each qualifying non-print move
|
|
Translated:The distance filament will reverse before each qualifying non-print move
|
|
|
|
English:The distance from the model at which the first skirt loop is drawn.
|
|
Translated:The distance from the model at which the first skirt loop is drawn.
|
|
|
|
English:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
|
|
Translated:The distance that a perimeter will overlap itself when it completes its loop, expressed as a percentage of the Nozzle Diameter.
|
|
|
|
English:The distance that the filament has to extrude before we check the measured distance.
|
|
Translated:The distance that the filament has to extrude before we check the measured distance.
|
|
|
|
English:The distance the nozzle will lift after each retraction.
|
|
Translated:The distance the nozzle will lift after each retraction.
|
|
|
|
English:The distance the support material will be from the object in the X and Y directions.
|
|
Translated:The distance the support material will be from the object in the X and Y directions.
|
|
|
|
English:The distance to travel after completing a perimeter to improve seams.
|
|
Translated:The distance to travel after completing a perimeter to improve seams.
|
|
|
|
English:The extra distance the raft will extend around the edge of the part.
|
|
Translated:The extra distance the raft will extend around the edge of the part.
|
|
|
|
English:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
|
|
Translated:The extruder is currently heating and its target temperature cannot be changed until it reaches {0}°C.\n\nYou can set the starting extruder temperature in 'Slice Settings' -> 'Filament'.\n\n{1}
|
|
|
|
English:The extruder to use for support material. Default will use whichever extruder active at the time.
|
|
Translated:The extruder to use for support material. Default will use whichever extruder active at the time.
|
|
|
|
English:The extruder to use for the brim. Default will use the first extruder of the print.
|
|
Translated:The extruder to use for the brim. Default will use the first extruder of the print.
|
|
|
|
English:The extruder to use to for support material interface layers. Default will use whichever extruder active at the time.
|
|
Translated:The extruder to use to for support material interface layers. Default will use whichever extruder active at the time.
|
|
|
|
English:The extruder to use to print the raft. Default will use extruder 1.
|
|
Translated:The extruder to use to print the raft. Default will use extruder 1.
|
|
|
|
English:The firmware being used by the printer. Allows for improvements based on firmware such as optimized G-Code output.
|
|
Translated:The firmware being used by the printer. Allows for improvements based on firmware such as optimized G-Code output.
|
|
|
|
English:The geometric shape of the support structure for the inside of parts.
|
|
Translated:The geometric shape of the support structure for the inside of parts.
|
|
|
|
English:The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.
|
|
Translated:The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.
|
|
|
|
English:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
|
|
Translated:The inset amount for each side of the bed.\n- As a % of the width or depth\n- Ordered: Left, Front, Right, Back\n- NOTE: The probe offset is added on top of this
|
|
|
|
English:The inset amount for nozzle 1 from the bed (Left, Front, Right, Back).
|
|
Translated:The inset amount for nozzle 1 from the bed (Left, Front, Right, Back).
|
|
|
|
English:The inset amount for nozzle 2 from the bed (Left, Front, Right, Back).
|
|
Translated:The inset amount for nozzle 2 from the bed (Left, Front, Right, Back).
|
|
|
|
English:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
|
|
Translated:The layer(s) at which the print will pause, allowing for a change in filament. Printer is paused before starting the given layer. Leave blank to disable. To pause on multiple layers, separate the layer numbers with semicolons. For example: "16; 37".
|
|
|
|
English:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
|
|
Translated:The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.
|
|
|
|
English:The Markdown that will be shown on the Clean Filament page.
|
|
Translated:The Markdown that will be shown on the Clean Filament page.
|
|
|
|
English:The Markdown that will be shown on the Insert Filament page.
|
|
Translated:The Markdown that will be shown on the Insert Filament page.
|
|
|
|
English:The Markdown that will be shown on the second extruders Clean Filament page.
|
|
Translated:The Markdown that will be shown on the second extruders Clean Filament page.
|
|
|
|
English:The Markdown that will be shown on the second extruders Insert Filament page.
|
|
Translated:The Markdown that will be shown on the second extruders Insert Filament page.
|
|
|
|
English:The Markdown that will be shown on the Trim Filament page.
|
|
Translated:The Markdown that will be shown on the Trim Filament page.
|
|
|
|
English:The maximum amount that an avoid crossing travel can exceed the direct distance. If the avoid travel is too long, a direct move will be executed.
|
|
Translated:The maximum amount that an avoid crossing travel can exceed the direct distance. If the avoid travel is too long, a direct move will be executed.
|
|
|
|
English:The maximum amount the printer can accelerate on a G-Code move. Used for print time estimation.
|
|
Translated:The maximum amount the printer can accelerate on a G-Code move. Used for print time estimation.
|
|
|
|
English:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
|
Translated:The maximum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
|
|
|
English:The maximum speed that the printer treats as 0 and changes direction instantly. Used for print time estimation.
|
|
Translated:The maximum speed that the printer treats as 0 and changes direction instantly. Used for print time estimation.
|
|
|
|
English:The maximum speed the printer can move. Uused for print time estimation.
|
|
Translated:The maximum speed the printer can move. Uused for print time estimation.
|
|
|
|
English:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
|
|
Translated:The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.
|
|
|
|
English:The minimum distance with, avoid crossing perimeters turned on, of a non-print move which will trigger a retraction.
|
|
Translated:The minimum distance with, avoid crossing perimeters turned on, of a non-print move which will trigger a retraction.
|
|
|
|
English:The minimum length of filament that must be extruded before a retraction can occur.
|
|
Translated:The minimum length of filament that must be extruded before a retraction can occur.
|
|
|
|
English:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value. NOTE: This is measure as input into the extruder not mm on the bed.
|
|
Translated:The minimum length of filament to use printing the skirt loops. Enough skirt loops will be drawn to use this amount of filament, overriding the value set in Loops if the value in Loops will produce a skirt shorter than this value. NOTE: This is measure as input into the extruder not mm on the bed.
|
|
|
|
English:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power, regardless of layer time.
|
|
Translated:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power, regardless of layer time.
|
|
|
|
English:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
|
Translated:The minimum speed at which the layer cooling fan will run, expressed as a percentage of full power.
|
|
|
|
English:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
|
|
Translated:The minimum speed to which the printer will reduce to in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
|
|
|
|
English:The number of extruders the printer has.
|
|
Translated:The number of extruders the printer has.
|
|
|
|
English:The number of layers for which the layer cooling fan will be forced off at the start of the print.
|
|
Translated:The number of layers for which the layer cooling fan will be forced off at the start of the print.
|
|
|
|
English:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
|
Translated:The number of layers or the distance in millimeters to solid fill on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
|
|
|
English:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
|
|
Translated:The number of layers or the distance to print solid material between the supports and the part. Add mm to the end of the number to specify distance.
|
|
|
|
English:The number of layers to consider as the beginning of the print. These will print at initial layer speed.
|
|
Translated:The number of layers to consider as the beginning of the print. These will print at initial layer speed.
|
|
|
|
English:The number of layers to create the brims. This can make the brim stronger when needed.
|
|
Translated:The number of layers to create the brims. This can make the brim stronger when needed.
|
|
|
|
English:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
|
Translated:The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
|
|
|
|
English:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
|
|
Translated:The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
|
|
|
|
English:The number of loops to draw around parts. Used to provide additional bed adhesion
|
|
Translated:The number of loops to draw around parts. Used to provide additional bed adhesion
|
|
|
|
English:The number of perimeters will be this number times the number of active extruders. Make this a smaller number to make the wipe more hollow or bigger to fill it.
|
|
Translated:The number of perimeters will be this number times the number of active extruders. Make this a smaller number to make the wipe more hollow or bigger to fill it.
|
|
|
|
English:The number of times to sample each probe position (results will be averaged).
|
|
Translated:The number of times to sample each probe position (results will be averaged).
|
|
|
|
English:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
|
|
Translated:The number, or total width, of external shells to create. Add mm to the end of the number to specify width in millimeters.
|
|
|
|
English:The offset from T0 to the probe.
|
|
Translated:The offset from T0 to the probe.
|
|
|
|
English:The offset of each nozzle relative to the first nozzle. Only useful for multiple extruder machines.
|
|
Translated:The offset of each nozzle relative to the first nozzle. Only useful for multiple extruder machines.
|
|
|
|
English:The pattern to draw for the generation of support material.
|
|
Translated:The pattern to draw for the generation of support material.
|
|
|
|
English:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
|
|
Translated:The position (X and Y coordinates) of the center of the print bed, in millimeters. Normally this is 1/2 the bed size for Cartesian printers and 0, 0 for Delta printers.
|
|
|
|
English:The price of one kilogram of filament. Used for estimating the cost of a print in the Layer View.
|
|
Translated:The price of one kilogram of filament. Used for estimating the cost of a print in the Layer View.
|
|
|
|
English:The print leveling algorithm to use.
|
|
Translated:The print leveling algorithm to use.
|
|
|
|
English:The printer has a c axis used by a tool changer (e3d quad extruder).
|
|
Translated:The printer has a c axis used by a tool changer (e3d quad extruder).
|
|
|
|
English:The printer has a heated bed.
|
|
Translated:The printer has a heated bed.
|
|
|
|
English:The printer has a layer-cooling fan.
|
|
Translated:The printer has a layer-cooling fan.
|
|
|
|
English:The printer has a SD card reader.
|
|
Translated:The printer has a SD card reader.
|
|
|
|
English:The printer has a servo for lowering and raising the z probe.
|
|
Translated:The printer has a servo for lowering and raising the z probe.
|
|
|
|
English:The printer has a z probe for measuring bed level.
|
|
Translated:The printer has a z probe for measuring bed level.
|
|
|
|
English:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
|
|
Translated:The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
|
|
|
|
English:The printer has the ability to check for continuity on the nozzle.
|
|
Translated:The printer has the ability to check for continuity on the nozzle.
|
|
|
|
English:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
|
|
Translated:The printer has the ability to control the power supply. Enable this function to show the ATX Power Control section on the Controls pane.
|
|
|
|
English:The printer requires print leveling to run correctly.
|
|
Translated:The printer requires print leveling to run correctly.
|
|
|
|
English:The printer should now be 'homing'.
|
|
Translated:The printer should now be 'homing'.
|
|
|
|
English:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
|
|
Translated:The profile you are attempting to load has been corrupted. We loaded your last usable {0} {1} profile from your recent profile history instead.
|
|
|
|
English:The ratio between the requested extrusion and the sensors measured extrusion that will trigger an error.
|
|
Translated:The ratio between the requested extrusion and the sensors measured extrusion that will trigger an error.
|
|
|
|
English:The semaphore timeout period has expired.
|
|
Translated:The semaphore timeout period has expired.
|
|
|
|
English:The serial port communication speed of the printers firmware.
|
|
Translated:The serial port communication speed of the printers firmware.
|
|
|
|
English:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
|
|
Translated:The 'Serial Port' section lists all available serial\nports on your device. Changing which USB port the printer\nis connected to may change the associated serial port.\n\nTip: If you are uncertain, unplug/plug in your printer\nand hit refresh. The new port that appears should be\nyour printer.
|
|
|
|
English:The serial port to use while connecting to this printer.
|
|
Translated:The serial port to use while connecting to this printer.
|
|
|
|
English:The shape of the physical print bed.
|
|
Translated:The shape of the physical print bed.
|
|
|
|
English:The slicer to use.
|
|
Translated:The slicer to use.
|
|
|
|
English:The speed at which bridging between walls will print.
|
|
Translated:The speed at which bridging between walls will print.
|
|
|
|
English:The speed at which filament will retract and re-extrude.
|
|
Translated:The speed at which filament will retract and re-extrude.
|
|
|
|
English:The speed at which infill will print.
|
|
Translated:The speed at which infill will print.
|
|
|
|
English:The speed at which inside perimeters will print.
|
|
Translated:The speed at which inside perimeters will print.
|
|
|
|
English:The speed at which interface layers will print.
|
|
Translated:The speed at which interface layers will print.
|
|
|
|
English:The speed at which outside, external, or the otherwise visible perimeters will print.
|
|
Translated:The speed at which outside, external, or the otherwise visible perimeters will print.
|
|
|
|
English:The speed at which support material structures will print.
|
|
Translated:The speed at which support material structures will print.
|
|
|
|
English:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
|
|
Translated:The speed at which the layer cooling fan will run when bridging, expressed as a percentage of full power.
|
|
|
|
English:The speed at which the layer on top of the air gap will print.
|
|
Translated:The speed at which the layer on top of the air gap will print.
|
|
|
|
English:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
|
|
Translated:The speed at which the layers of the raft (other than the first layer) will print. This can be set explicitly or as a percentage of the Infill speed.
|
|
|
|
English:The speed at which the nozzle will move when not extruding material.
|
|
Translated:The speed at which the nozzle will move when not extruding material.
|
|
|
|
English:The speed at which the nozzle will move when printing the initial layers. If expressed as a percentage the Infill speed is modified.
|
|
Translated:The speed at which the nozzle will move when printing the initial layers. If expressed as a percentage the Infill speed is modified.
|
|
|
|
English:The speed at which the nozzle will move when recovering a failed print, for 1 layer.
|
|
Translated:The speed at which the nozzle will move when recovering a failed print, for 1 layer.
|
|
|
|
English:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
|
|
Translated:The speed at which the top solid layers will print. Can be set explicitly or as a percentage of the Infill speed.
|
|
|
|
English:The speed to run filament into and out of the printer.
|
|
Translated:The speed to run filament into and out of the printer.
|
|
|
|
English:The starting height (z) of the print head before probing each print level position.
|
|
Translated:The starting height (z) of the print head before probing each print level position.
|
|
|
|
English:The target temperature the extruder will attempt to reach during the print.
|
|
Translated:The target temperature the extruder will attempt to reach during the print.
|
|
|
|
English:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
|
|
Translated:The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
|
|
|
|
English:The temperature to print when the bed is coverd in kapton tape. Set to 0 to disable.
|
|
Translated:The temperature to print when the bed is coverd in kapton tape. Set to 0 to disable.
|
|
|
|
English:The temperature to print when the bed is coverd in kapton tape. Set to 0 to use default.
|
|
Translated:The temperature to print when the bed is coverd in kapton tape. Set to 0 to use default.
|
|
|
|
English:The temperature to print when the bed is coverd with blue tape. Set to 0 to disable.
|
|
Translated:The temperature to print when the bed is coverd with blue tape. Set to 0 to disable.
|
|
|
|
English:The temperature to print when the bed is coverd with blue tape. Set to 0 to use default.
|
|
Translated:The temperature to print when the bed is coverd with blue tape. Set to 0 to use default.
|
|
|
|
English:The temperature to print when the bed is polypropylene. Set to 0 to disable.
|
|
Translated:The temperature to print when the bed is polypropylene. Set to 0 to disable.
|
|
|
|
English:The temperature to print when the bed is polypropylene. Set to 0 to use default.
|
|
Translated:The temperature to print when the bed is polypropylene. Set to 0 to use default.
|
|
|
|
English:The temperature to print when the bed is using BuildTak. Set to 0 to disable.
|
|
Translated:The temperature to print when the bed is using BuildTak. Set to 0 to disable.
|
|
|
|
English:The temperature to print when the bed is using BuildTak. Set to 0 to use default.
|
|
Translated:The temperature to print when the bed is using BuildTak. Set to 0 to use default.
|
|
|
|
English:The temperature to print when the bed is using garolite. Set to 0 to disable.
|
|
Translated:The temperature to print when the bed is using garolite. Set to 0 to disable.
|
|
|
|
English:The temperature to print when the bed is using garolite. Set to 0 to use default.
|
|
Translated:The temperature to print when the bed is using garolite. Set to 0 to use default.
|
|
|
|
English:The temperature to print when the bed is using glass. Set to 0 to disable.
|
|
Translated:The temperature to print when the bed is using glass. Set to 0 to disable.
|
|
|
|
English:The temperature to print when the bed is using glass. Set to 0 to use default.
|
|
Translated:The temperature to print when the bed is using glass. Set to 0 to use default.
|
|
|
|
English:The temperature to print when the bed is using PEI. Set to 0 to disable.
|
|
Translated:The temperature to print when the bed is using PEI. Set to 0 to disable.
|
|
|
|
English:The temperature to print when the bed is using PEI. Set to 0 to use default.
|
|
Translated:The temperature to print when the bed is using PEI. Set to 0 to use default.
|
|
|
|
English:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
|
|
Translated:The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
|
|
|
|
English:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
|
|
Translated:The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
|
|
|
|
English:The thickness of each layer of the print, except the first layer. A smaller number will create more layers and more vertical accuracy but also a slower print.
|
|
Translated:The thickness of each layer of the print, except the first layer. A smaller number will create more layers and more vertical accuracy but also a slower print.
|
|
|
|
English:The thickness of the first layer. A first layer taller than the default layer thickness can ensure good adhesion to the build plate.
|
|
Translated:The thickness of the first layer. A first layer taller than the default layer thickness can ensure good adhesion to the build plate.
|
|
|
|
English:The time it takes to heat back up from a cool down.
|
|
Translated:The time it takes to heat back up from a cool down.
|
|
|
|
English:The time over which to increase the Extra Length On Restart to its maximum value. Below this time only a portion of the extra length will be applied. Leave 0 to apply the entire amount all the time.
|
|
Translated:The time over which to increase the Extra Length On Restart to its maximum value. Below this time only a portion of the extra length will be applied. Leave 0 to apply the entire amount all the time.
|
|
|
|
English:The width and depth of the support pillars
|
|
Translated:The width and depth of the support pillars
|
|
|
|
English:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
|
|
Translated:The X and Y position of the hot end that minimizes the chance of colliding with the parts on the bed.
|
|
|
|
English:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
|
|
Translated:The X and Y values of the size of the print bed, in millimeters. For printers with a circular bed, these values are the diameters on the X and Y axes.
|
|
|
|
English:Theme
|
|
Translated:Theme
|
|
|
|
English:There is a new update available for download
|
|
Translated:There is a new update available for download
|
|
|
|
English:This data compensates for machine misalignment and bed distortion, and ensures good first layer adhesion.
|
|
Translated:This data compensates for machine misalignment and bed distortion, and ensures good first layer adhesion.
|
|
|
|
English:This data is required for software print leveling and ensures good first layer adhesion.
|
|
Translated:This data is required for software print leveling and ensures good first layer adhesion.
|
|
|
|
English:This is a set of regular expressions to apply to lines after they are received from the printer. They will be applied in order to each line received.
|
|
Translated:This is a set of regular expressions to apply to lines after they are received from the printer. They will be applied in order to each line received.
|
|
|
|
English:This is a set of regular expressions to apply to lines prior to sending to a printer. They will be applied in the order listed before sending. To return more than one instruction separate them with comma.
|
|
Translated:This is a set of regular expressions to apply to lines prior to sending to a printer. They will be applied in the order listed before sending. To return more than one instruction separate them with comma.
|
|
|
|
English:This is the angle that lowers or deploys the z probe.
|
|
Translated:This is the angle that lowers or deploys the z probe.
|
|
|
|
English:This is the angle that raises or stows the z probe.
|
|
Translated:This is the angle that raises or stows the z probe.
|
|
|
|
English:This is the make (often the manufacturer) of printer this profile is targeting.
|
|
Translated:This is the make (often the manufacturer) of printer this profile is targeting.
|
|
|
|
English:This is the model of printer this profile is targeting.
|
|
Translated:This is the model of printer this profile is targeting.
|
|
|
|
English:This is the name of your printer that will be displayed in the choose printer menu.
|
|
Translated:This is the name of your printer that will be displayed in the choose printer menu.
|
|
|
|
English:This is used to increase the number of downloads allowed when browsing GitHub repositories
|
|
Translated:This is used to increase the number of downloads allowed when browsing GitHub repositories
|
|
|
|
English:This should be checked if the printer supports multiple bed surfaces and the bed temperature for the different surfaces needs to vary.
|
|
Translated:This should be checked if the printer supports multiple bed surfaces and the bed temperature for the different surfaces needs to vary.
|
|
|
|
English:This should be set to the current bed surfaces of the printer. It is used to select the correct bed temperature for a given material and bed surface combination.
|
|
Translated:This should be set to the current bed surfaces of the printer. It is used to select the correct bed temperature for a given material and bed surface combination.
|
|
|
|
English:This will ensure that no filament is stuck to your nozzle.
|
|
Translated:This will ensure that no filament is stuck to your nozzle.
|
|
|
|
English:This will only work on specific hardware. Do not use unless you are sure your printer controller supports this feature
|
|
Translated:This will only work on specific hardware. Do not use unless you are sure your printer controller supports this feature
|
|
|
|
English:Thread Scale
|
|
Translated:Thread Scale
|
|
|
|
English:Threads
|
|
Translated:Threads
|
|
|
|
English:Threshold
|
|
Translated:Threshold
|
|
|
|
English:Thumbnails
|
|
Translated:Thumbnails
|
|
|
|
English:Time
|
|
Translated:Time
|
|
|
|
English:Time For Extra Length
|
|
Translated:Time For Extra Length
|
|
|
|
English:Time From Start
|
|
Translated:Time From Start
|
|
|
|
English:Time Multiplier
|
|
Translated:Time Multiplier
|
|
|
|
English:Time to End
|
|
Translated:Time to End
|
|
|
|
English:Time to Tool Change
|
|
Translated:Time to Tool Change
|
|
|
|
English:Tip Scale
|
|
Translated:Tip Scale
|
|
|
|
English:Tip Segments
|
|
Translated:Tip Segments
|
|
|
|
English:TM
|
|
Translated:TM
|
|
|
|
English:To complete the next few steps you will need
|
|
Translated:To complete the next few steps you will need
|
|
|
|
English:To Folder
|
|
Translated:To Folder
|
|
|
|
English:Toggle Selection
|
|
Translated:Toggle Selection
|
|
|
|
English:Tool
|
|
Translated:Tool
|
|
|
|
English:Tool Bar Options
|
|
Translated:Tool Bar Options
|
|
|
|
English:Tools
|
|
Translated:Tools
|
|
|
|
English:Tooth Count
|
|
Translated:Tooth Count
|
|
|
|
English:Top Inset
|
|
Translated:Top Inset
|
|
|
|
English:Top Solid Infill
|
|
Translated:Top Solid Infill
|
|
|
|
English:Top Solid Layers
|
|
Translated:Top Solid Layers
|
|
|
|
English:Torus
|
|
Translated:Torus
|
|
|
|
English:Total Time Printed
|
|
Translated:Total Time Printed
|
|
|
|
English:Touch Screen Mode
|
|
Translated:Touch Screen Mode
|
|
|
|
English:Transform
|
|
Translated:Transform
|
|
|
|
English:Transform Wrapper
|
|
Translated:Transform Wrapper
|
|
|
|
English:Translate
|
|
Translated:Translate
|
|
|
|
English:Translation
|
|
Translated:Translation
|
|
|
|
English:Transparent
|
|
Translated:Transparent
|
|
|
|
English:Travel
|
|
Translated:Travel
|
|
|
|
English:TRIANGLES
|
|
Translated:TRIANGLES
|
|
|
|
English:Trim Filament
|
|
Translated:Trim Filament
|
|
|
|
English:Trim Filament Page
|
|
Translated:Trim Filament Page
|
|
|
|
English:Tuning Adjustment
|
|
Translated:Tuning Adjustment
|
|
|
|
English:Turn off motor current at end of print or after cancel print.
|
|
Translated:Turn off motor current at end of print or after cancel print.
|
|
|
|
English:Turn on if Below
|
|
Translated:Turn on if Below
|
|
|
|
English:Turn retractions on and off.
|
|
Translated:Turn retractions on and off.
|
|
|
|
English:Turn the fan on and off regardless of settings.
|
|
Translated:Turn the fan on and off regardless of settings.
|
|
|
|
English:Turntable Mode
|
|
Translated:Turntable Mode
|
|
|
|
English:Twist
|
|
Translated:Twist
|
|
|
|
English:Twist Right
|
|
Translated:Twist Right
|
|
|
|
English:Type 'Esc' to cancel
|
|
Translated:Type 'Esc' to cancel
|
|
|
|
English:Undo
|
|
Translated:Undo
|
|
|
|
English:Ungroup
|
|
Translated:Ungroup
|
|
|
|
English:Unknown
|
|
Translated:Unknown
|
|
|
|
English:Unknown Reason
|
|
Translated:Unknown Reason
|
|
|
|
English:Unload
|
|
Translated:Unload
|
|
|
|
English:Unload filament
|
|
Translated:Unload filament
|
|
|
|
English:Unload Filament
|
|
Translated:Unload Filament
|
|
|
|
English:Unload Filament Length
|
|
Translated:Unload Filament Length
|
|
|
|
English:Unload Material
|
|
Translated:Unload Material
|
|
|
|
English:Unpin
|
|
Translated:Unpin
|
|
|
|
English:Unplug printer USB cable from computer
|
|
Translated:Unplug printer USB cable from computer
|
|
|
|
English:Up
|
|
Translated:Up
|
|
|
|
English:Up Arrow
|
|
Translated:Up Arrow
|
|
|
|
English:Update
|
|
Translated:Update
|
|
|
|
English:Update Available
|
|
Translated:Update Available
|
|
|
|
English:Update Setting
|
|
Translated:Update Setting
|
|
|
|
English:Update Settings
|
|
Translated:Update Settings
|
|
|
|
English:Update Settings...
|
|
Translated:Update Settings...
|
|
|
|
English:Upgrade
|
|
Translated:Upgrade
|
|
|
|
English:Uploading...
|
|
Translated:Uploading...
|
|
|
|
English:Use Automatic Z Probe
|
|
Translated:Use Automatic Z Probe
|
|
|
|
English:Use cursor keys for axis movements
|
|
Translated:Use cursor keys for axis movements
|
|
|
|
English:Use G0
|
|
Translated:Use G0
|
|
|
|
English:Use G0 for moves rather than G1.
|
|
Translated:Use G0 for moves rather than G1.
|
|
|
|
English:Use Grade 2
|
|
Translated:Use Grade 2
|
|
|
|
English:Used to specify if more than one extruder share a common heater cartridge.
|
|
Translated:Used to specify if more than one extruder share a common heater cartridge.
|
|
|
|
English:User Control
|
|
Translated:User Control
|
|
|
|
English:Username
|
|
Translated:Username
|
|
|
|
English:Username or Email
|
|
Translated:Username or Email
|
|
|
|
English:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
|
|
Translated:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
|
|
|
|
English:Using the above controls
|
|
Translated:Using the above controls
|
|
|
|
English:Utilize High Res Monitors
|
|
Translated:Utilize High Res Monitors
|
|
|
|
English:Validate After Clear
|
|
Translated:Validate After Clear
|
|
|
|
English:Validate Calibration Before Printing
|
|
Translated:Validate Calibration Before Printing
|
|
|
|
English:Validate G Code
|
|
Translated:Validate G Code
|
|
|
|
English:Validate Layer Height
|
|
Translated:Validate Layer Height
|
|
|
|
English:Validate Probe Offset Automatically
|
|
Translated:Validate Probe Offset Automatically
|
|
|
|
English:Validation Threshold
|
|
Translated:Validation Threshold
|
|
|
|
English:Variable Sheet
|
|
Translated:Variable Sheet
|
|
|
|
English:Version
|
|
Translated:Version
|
|
|
|
English:View Just My Settings
|
|
Translated:View Just My Settings
|
|
|
|
English:View Mode = Materials
|
|
Translated:View Mode = Materials
|
|
|
|
English:View Mode = Non-Manifold
|
|
Translated:View Mode = Non-Manifold
|
|
|
|
English:View Mode = Outlines
|
|
Translated:View Mode = Outlines
|
|
|
|
English:View Mode = Overhangs
|
|
Translated:View Mode = Overhangs
|
|
|
|
English:View Mode = Polygons
|
|
Translated:View Mode = Polygons
|
|
|
|
English:View Mode = Shaded
|
|
Translated:View Mode = Shaded
|
|
|
|
English:View Settings
|
|
Translated:View Settings
|
|
|
|
English:'Wait' Responses
|
|
Translated:'Wait' Responses
|
|
|
|
English:Waiting For Bed To Heat
|
|
Translated:Waiting For Bed To Heat
|
|
|
|
English:Waiting for Bed to Heat to
|
|
Translated:Waiting for Bed to Heat to
|
|
|
|
English:Waiting for Extruder 1 to Heat to
|
|
Translated:Waiting for Extruder 1 to Heat to
|
|
|
|
English:Waiting for the bed to heat to
|
|
Translated:Waiting for the bed to heat to
|
|
|
|
English:Waiting for the hotend to heat to
|
|
Translated:Waiting for the hotend to heat to
|
|
|
|
English:Warm up Time
|
|
Translated:Warm up Time
|
|
|
|
English:Warning
|
|
Translated:Warning
|
|
|
|
English:Warning! The tip of the nozzle will be HOT!
|
|
Translated:Warning! The tip of the nozzle will be HOT!
|
|
|
|
English:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
|
|
Translated:WARNING: Disconnecting will stop the current print.\n\nAre you sure you want to disconnect?
|
|
|
|
English:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
|
|
Translated:WARNING: In order to perform print recovery, your printer must move down to reach its home position.\nIf your print is too large, part of your printer may collide with it when moving down.\nMake sure it is safe to perform this operation before proceeding.
|
|
|
|
English:We will now finalize our measurement of the extruder height at this position.
|
|
Translated:We will now finalize our measurement of the extruder height at this position.
|
|
|
|
English:We will now refine our measurement of the extruder height at this position.
|
|
Translated:We will now refine our measurement of the extruder height at this position.
|
|
|
|
English:We will use this paper to measure the distance between the nozzle and the bed.
|
|
Translated:We will use this paper to measure the distance between the nozzle and the bed.
|
|
|
|
English:Wedge
|
|
Translated:Wedge
|
|
|
|
English:Welcome to MatterControl
|
|
Translated:Welcome to MatterControl
|
|
|
|
English:Welcome to MatterControl! What would you like to do today?
|
|
Translated:Welcome to MatterControl! What would you like to do today?
|
|
|
|
English:Weld Edges
|
|
Translated:Weld Edges
|
|
|
|
English:Weld Tolerance
|
|
Translated:Weld Tolerance
|
|
|
|
English:Weld Vertices
|
|
Translated:Weld Vertices
|
|
|
|
English:What to do when there is not a good place to hide the seam.
|
|
Translated:What to do when there is not a good place to hide the seam.
|
|
|
|
English:What went wrong?
|
|
Translated:What went wrong?
|
|
|
|
English:What's this?
|
|
Translated:What's this?
|
|
|
|
English:wheel
|
|
Translated:wheel
|
|
|
|
English:When filling bottom and top solid layers always create them so that each new print segment side is touching a previous segment on the same side.
|
|
Translated:When filling bottom and top solid layers always create them so that each new print segment side is touching a previous segment on the same side.
|
|
|
|
English:When this is checked MatterControl will attempt to recover a print in the event of a failure, such as lost connection or lost power.
|
|
Translated:When this is checked MatterControl will attempt to recover a print in the event of a failure, such as lost connection or lost power.
|
|
|
|
English:When upgrading to new firmware, first save a backup of the current firmware.
|
|
Translated:When upgrading to new firmware, first save a backup of the current firmware.
|
|
|
|
English:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
|
|
Translated:When using multiple extruders, the distance filament will reverse before changing to a different extruder.
|
|
|
|
English:Width
|
|
Translated:Width
|
|
|
|
English:Width Percent
|
|
Translated:Width Percent
|
|
|
|
English:Will be updated to:
|
|
Translated:Will be updated to:
|
|
|
|
English:Wipe Shield Distance
|
|
Translated:Wipe Shield Distance
|
|
|
|
English:Wipe Tower Size
|
|
Translated:Wipe Tower Size
|
|
|
|
English:Wizard
|
|
Translated:Wizard
|
|
|
|
English:Wolud you like to save changes before closing?
|
|
Translated:Wolud you like to save changes before closing?
|
|
|
|
English:Write Filter
|
|
Translated:Write Filter
|
|
|
|
English:X and Y Distance
|
|
Translated:X and Y Distance
|
|
|
|
English:X Offset
|
|
Translated:X Offset
|
|
|
|
English:XY Calibration
|
|
Translated:XY Calibration
|
|
|
|
English:XY Homing Position
|
|
Translated:XY Homing Position
|
|
|
|
English:Y Offset
|
|
Translated:Y Offset
|
|
|
|
English:Yes
|
|
Translated:Yes
|
|
|
|
English:You are connected to the Emulator not an actual printer.
|
|
Translated:You are connected to the Emulator not an actual printer.
|
|
|
|
English:You can also
|
|
Translated:You can also
|
|
|
|
English:You have successfully imported a new printer profile. You can find '{0}' in your list of available printers.
|
|
Translated:You have successfully imported a new printer profile. You can find '{0}' in your list of available printers.
|
|
|
|
English:Your 3D print has been auto-paused.\n\nLayer {0} reached.
|
|
Translated:Your 3D print has been auto-paused.\n\nLayer {0} reached.
|
|
|
|
English:Your Email Address
|
|
Translated:Your Email Address
|
|
|
|
English:Your Phone Number
|
|
Translated:Your Phone Number
|
|
|
|
English:Your Share Code
|
|
Translated:Your Share Code
|
|
|
|
English:Z Calibration
|
|
Translated:Z Calibration
|
|
|
|
English:Z Calibration measures the z position of the nozzles.
|
|
Translated:Z Calibration measures the z position of the nozzles.
|
|
|
|
English:Z Lift
|
|
Translated:Z Lift
|
|
|
|
English:Z Offset
|
|
Translated:Z Offset
|
|
|
|
English:ZIP File
|
|
Translated:ZIP File
|
|
|
|
English:Zoom
|
|
Translated:Zoom
|
|
|
|
English:Zoom in
|
|
Translated:Zoom in
|
|
|
|
English:Zoom out
|
|
Translated:Zoom out
|
|
|
|
English:Zoom to selection
|
|
Translated:Zoom to selection
|
|
|
|
English:Zoom to Selection
|
|
Translated:Zoom to Selection
|
|
|
|
English:Zoom to window
|
|
Translated:Zoom to window
|
|
|
|
English:Zoom View
|
|
Translated:Zoom View
|
|
|
|
English:Zoom: Mouse Wheel | Ctrl + Alt + Left Mouse Button
|
|
Translated:Zoom: Mouse Wheel | Ctrl + Alt + Left Mouse Button
|
|
|