nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
mattercontrol/StaticData/Profiles/3D Stuffmaker/Creator.printer
John Lewin 1df6fc18d6 Update OemProfiles to comply with new M109 tests 
- Fix Creator and Evolution printers
 - Ignore base layer for Slice preset by using OemLayer.ValueOrDefault rather than GetValue
 - Rename test to StartGCodeWithExtrudesMustFollowM109Heatup
2016-07-26 15:32:36 -07:00

422 lines
No EOL
14 KiB
Text
Raw Blame History

{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "95,155",
"bed_temperature": "0",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "0.8",
"bridge_speed": "40",
"brim_width": "0.5",
"build_height": "110",
"cancel_gcode": "G91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-10 F500 ; Retract Extruder\\nG90;\\nG28 X0; Home X axis\\nG1 Y155 F3000; bring plate to front\\nM84;",
"center_part_on_bed": "0",
"complete_objects": "1",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "1",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ; turn off temperature\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-15 F500 ; Retract Extruder\\nG90;\\nG28 X0 ; home X axis\\nG1 Y225 F3000; bring plate to front\\nM84;",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "40",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "35",
"extruder_clearance_radius": "40",
"extruder_count": "1",
"extruder_offset": "0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.74",
"fill_angle": "90",
"fill_density": "10%",
"fill_pattern": "rectilinear",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "0",
"first_layer_extrusion_width": "110%",
"first_layer_height": "0.15",
"first_layer_speed": "20",
"first_layer_temperature": "210",
"g0": "0",
"gap_fill_speed": "15",
"gcode_arcs": "0",
"gcode_comments": "1",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "0",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "0",
"heat_extruder_before_homing": "1",
"include_firmware_updater": "Simple Arduino",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "1",
"infill_overlap_perimeter": "0",
"infill_speed": "40",
"infill_type": "LINES",
"layer_height": "0.3",
"layer_to_pause": "",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.003",
"min_fan_speed": "35",
"min_print_speed": "3",
"min_skirt_length": "2",
"notes": "",
"nozzle_diameter": "0.75",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X0 Y0 F3000; home all axes\\nM84 S0",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "40",
"perimeters": "3",
"post_process": "",
"print_center": "46,80",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "1",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": "0.375",
"raft_extra_distance_around_part": "4",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "20",
"randomize_start": "1",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "1",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "3",
"retract_layer_change": "0",
"retract_length": "0.5",
"retract_length_tool_change": "10",
"retract_lift": "0.4",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "25",
"retract_when_changing_islands": "1",
"show_reset_connection": "1",
"skirt_distance": "0.7",
"skirt_height": "2",
"skirts": "3",
"slowdown_below_layer_time": "20",
"small_perimeter_speed": "10",
"solid_fill_pattern": "concentric",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "20",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "90%",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "M92 X 31.6900 Y31.5515 Z1283 E70.770\\nM205 X40\\nG28 ; home all axes\\nG91\\nM109 S208 B250 F0.5\\nG1 E30 F100 ; Extrude primer filament\\nG90",
"start_perimeters_at_concave_points": "1",
"start_perimeters_at_non_overhang": "1",
"support_air_gap": ".3",
"support_material": "0",
"support_material_angle": "45",
"support_material_create_internal_support": "0",
"support_material_create_perimeter": "1",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "100%",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "1.5mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_percent": "50",
"support_material_spacing": "2",
"support_material_speed": "30",
"support_material_threshold": "30",
"support_material_xy_distance": "3.25",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "0.9mm",
"support_type": "LINES",
"temperature": "208",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "25",
"top_solid_layers": "1.2mm",
"travel_speed": "95",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "1",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Stuffmaker",
"model": "Creator",
"created_date": "7/19/2016 7:54:10 PM",
"baud_rate": "250000",
"default_material_presets": "PLA Basic-Clear",
"default_slice_engine": "MatterSlice",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Box.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "SimplePrint Basic-Black",
"layer_id": "1cb8ec37-1ce3-4727-a331-ce3579d0fd56",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Blue",
"layer_id": "09818b89-9d6e-4866-ae2a-c5950cc872e4",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Clear",
"layer_id": "40531038-d171-445a-bccf-9033d132c75a",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Green",
"layer_id": "e67220e3-b35c-423e-828d-84ac8ab21ad7",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Ivory",
"layer_id": "762f482b-763a-4288-b714-c4dfad324826",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Orange",
"layer_id": "eef0226b-9f63-465f-b460-cccc20986b5a",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Pink",
"layer_id": "8cfaf59a-a022-4dbe-b8ed-41a60f7394fa",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Purple",
"layer_id": "d64f695b-fb31-4ce7-8438-ade2cc258b38",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Red",
"layer_id": "170276da-c391-42c5-a9e6-1b5ea352157e",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Silver",
"layer_id": "f256efec-a925-4144-87eb-eeb8f64ff202",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-White",
"layer_id": "f13998dc-d310-4d15-9207-89d7759c4463",
"filament_diameter": "1.74",
"first_layer_temperature": "210",
"temperature": "210"
},
{
"layer_name": "SimplePrint Basic-Yellow",
"layer_id": "1578b7e8-cd67-48d2-95ce-5218d9ca149f",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Crystal-Trans. Blue",
"layer_id": "7abe1d2f-7bb8-46e9-8a79-bcdf0bc5095d",
"filament_diameter": "1.72",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Orange",
"layer_id": "413e0267-05a1-487e-ae8d-7ef51e03035d",
"filament_diameter": "1.8",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Red",
"layer_id": "2d5e844b-9545-4f94-a79f-ecd236599627",
"filament_diameter": "1.78",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Yellow",
"layer_id": "b8c12ab4-d3b3-4070-8e15-59b911750f9e",
"filament_diameter": "1.75",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint PLA Max-Black",
"filament_density": "1.24",
"layer_id": "3442548f-85db-4635-8062-de3e7045a8c7",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint PLA Max-White",
"filament_density": "1.24",
"layer_id": "007a7e38-693e-4bfb-92bb-01ad46479733",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Timber-Wood",
"layer_id": "927bf753-55c4-489e-b9c7-7f1cc30c2b27",
"external_perimeter_speed": "45",
"first_layer_temperature": "198",
"infill_speed": "50",
"perimeter_speed": "50",
"retract_length": "2",
"retract_speed": "55",
"support_material_speed": "50",
"temperature": "198"
}
],
"QualityLayers": [
{
"layer_name": "High [Default with Supports]",
"layer_id": "80e7fd28-4fbb-4b35-bb38-210446d02875",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"infill_speed": "30",
"layer_height": "0.15",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "High [Default]",
"layer_id": "70927169-dc6f-4580-8fcb-370e97f9466f",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"infill_speed": "30",
"layer_height": "0.15",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
},
{
"layer_name": "High [No infill with Supports]",
"layer_id": "ee95c355-64a4-47a1-8cee-ba8c87f7b3a4",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.15",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "High [No infill]",
"layer_id": "c87750dd-51dc-4c89-ab58-134c856a6f69",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.15",
"min_print_speed": "22",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
},
{
"layer_name": "Standard [Default with Supports]",
"layer_id": "08e74b4b-12ea-47a6-b588-9513b89b25d6",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "Standard [Default]",
"layer_id": "1036257d-23b3-49b6-abca-45734b94e02c",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
},
{
"layer_name": "Standard [No infill with Supports]",
"layer_id": "8a2de3e8-fca5-4763-98b2-ab4cd61b0241",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "Standard [No infill]",
"layer_id": "4615b430-0545-4c4a-8ca3-97e3238c1b19",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
}
]
}
Reference in a new issue View git blame Copy permalink