mattercontrol/StaticData/Translations/de/Translation.txt

English:Connect
Translated:verbinden

English:Disconnect
Translated:trennen

English:Status
Translated:Status

English:Connected
Translated:verbunden

English:Not Connected
Translated:nicht verbunden

English:Select Printer
Translated:Drucker wählen

English:Options
Translated:Optionen

English:Next Print
Translated:nächster Druck

English:Add
Translated:hinzufügen

English:Add a file to be printed
Translated:Modell zum Drucken hinzufügen

English:Start
Translated:Start

English:Begin printing the selected item.
Translated:Beginne das ausgewählte Modell zu drucken.             

English:Skip
Translated:überspringen

English:Skip the current item and move to the next in queue
Translated:Aktuelles Modell in der Druckliste überspringen und das nächste wählen

English:Remove
Translated:Entfernen

English:Remove current item from queue
Translated:Aktuelles Modell aus der Druckliste entfernen

English:Pause
Translated:unterbrechen

English:Pause the current print
Translated:Aktuellen Druck unterbrechen

English:Cancel Connect
Translated:Verbindung abbrechen

English:Stop trying to connect to the printer
Translated:Verbindungsversuche mit dem Drucker stoppen

English:Cancel
Translated:abbrechen

English:Stop the current print
Translated:Aktuellen Druck stoppen

English:Resume
Translated:fortsetzen

English:Resume the current print
Translated:Aktuellen Druck fortsetzen

English:Reprint
Translated:Nachdrucken

English:Print current item again
Translated:Aktuelles Modell nochmal drucken

English:Done
Translated:Fertig!

English:Move to next print in queue
Translated:zum nächsten Modell in der Druckliste springen

English:No printer selected.  Press 'Connect' to choose a printer
Translated:Kein Drucker ausgewählt. Um Drucker auszuwählen 'verbinden' anklicken 

English:Press 'Add' to choose an item to print
Translated:Um ein Teil zum Drucken auszuwählen 'hinzufügen' anklicken 

English:No items in the print queue
Translated:Keine Modelle in der Druckliste

English:Queued to Print
Translated:zum drucken anstehend

English:View
Translated:Ansicht

English:Copy
Translated:Kopieren

English:Add to Queue
Translated:Der Druckliste hinzufügen.

English:Export
Translated:Exportieren

English:Est. Print Time
Translated:Vsl. Druckzeit

English:Calculating...
Translated:Berechne...

English:complete
Translated:fertig

English:Remove All
Translated:alle entfernen

English:Queue Options
Translated:Drucklisten-Optionen

English: Import from Zip
Translated: von Zip importieren                              

English: Export to Zip
Translated: als Zip exportieren

English: Export to Folder
Translated: nach Ordner exportieren                       

English:Extra
Translated:Extra

English: Create Part Sheet
Translated: Modelldarstellung erzeugen                                

English:Search
Translated:Suche

English:Import
Translated:Importieren

English:Create
Translated:Erstellen

English:Check for Update
Translated:nach Updates suchen

English:Download Update
Translated:Update herunterladen

English:Install Update
Translated:Update installieren

English:There are updates available.
Translated:Es sind Updates verfügbar.

English:Checking for updates...
Translated:suche nach updates...

English:MatterControl
Translated:MatterControl

English:Version {0}
Translated:Version {0}

English:Developed by MatterHackers
Translated:Entwickelt von MatterHackers

English:Please consider 
Translated:Bitte erwäge

English:donating
Translated:eine Spende

English: to help support and improve MatterControl.
Translated: um uns zu unterstützen und MatterControl weiter zu verbessern.

English:Special thanks to Alessandro Ranellucci for his incredible work on 
Translated:Besonderen Dank an Alessandro Ranellucci für seine wahnsinns Arbeit am

English:Slic3r
Translated:Slic3r

English:and to David Braam and Ultimaker BV, for the amazing 
Translated:und an David Braam und Ultimaker BV, für die wunderbare 

English:CuraEngine
Translated:Cura-Engine

English:Send Feedback
Translated:Feedback senden

English:www.matterhackers.com
Translated:www.matterhackers.com

English:Copyright © 2014 MatterHackers, Inc.
Translated:Copyright © 2014 MatterHackers, Inc.

English:Build: {0} | 
Translated:Build: {0} | 

English:Clear Cache
Translated:Cache leeren

English:Queue
Translated:Druckliste

English:Rotate
Translated:drehen

English:Scale
Translated:skalieren

English:Mirror
Translated:spiegeln

English:Display
Translated:Anzeige

English:Show Print Bed
Translated:zeige Druckplatte 

English:Show Print Area
Translated:zeige Druckbereich 

English:Show Wireframe
Translated:zeige Gitternetz 

English:Auto-Arrange
Translated:Autom. Ausrichten

English:Save
Translated:Speichern

English:Degrees
Translated:Winkel

English:Align to Bed
Translated:An Druckplatte ausrichten

English:Ratio
Translated:Verhältnis

English:Conversions
Translated:Einheiten umr.

English:reset
Translated:zurücksetzen

English:Apply Scale
Translated:Anwenden

English:Finding Parts
Translated:Finding Parts

English:Edit
Translated:Bearbeiten

English:Delete
Translated:Löschen

English:Close
Translated:Schliessen

English:Generate
Translated:Generieren

English:No GCode Available...
Translated:Kein G-Code vorhanden...

English:Loading GCode...
Translated:Lade G-Code...

English:Press 'generate' to view layers
Translated:'generieren' anklicken für Layer-Ansicht

English:Model
Translated:Teil

English:Layer
Translated:Layer

English:Library
Translated:Teile-Sammlung

English:About                                             
Translated:Info

English:Advanced\nControls
Translated:Erweiterte\nSteuerung

English:Print\nQueue
Translated:Druck-\nListe

English:Actual
Translated:Ist

English:Target
Translated:Ziel

English:Presets
Translated:Voreinstellungen

English:Movement Controls
Translated:Vorschub-Steuerung 

English:ALL
Translated:ALLE

English:UNLOCK
Translated:ENTSPERREN

English:Retract
Translated:Einzug

English:Extrude
Translated:Extrusion

English:Communications
Translated:Datenübertragung

English:SHOW TERMINAL
Translated:TERMINAL ANZEIGEN

English:Fan Controls
Translated:Lüftersteuerung

English:Fan Speed:
Translated:Drehzahl:

English:Macros
Translated:Makros

English:No macros are currently setup for this printer.
Translated:Für diesen Drucker existieren noch keine Makros.

English:Tuning Adjustment (while printing)
Translated:Abstimmung anpassen (während des Druckvorgangs)

English:Speed Multiplier
Translated:Vorschubgeschwindigkeit-Multiplikator

English:Set
Translated:Übernehmen

English:Extrusion Multiplier
Translated:Extrusions-Multiplikator

English:Controls
Translated:Steuerung

English:Slice Settings
Translated:Slice-Einstellungen

English:Show Help
Translated:Hilfe anzeigen

English:Show All Settings
Translated:Alle Einstellungen anzeigen

English:Active Settings
Translated:Aktive Einstellungen

English:unsaved changes
Translated:Änderungen nicht gespeichert

English:Revert
Translated:Rücksetzen

English:Options   
Translated:Optionen   

English:Slice Engine
Translated:Slice-Engine

English:No Printer Selected
Translated:Kein Drucker ausgewählt

English:No printer is currently selected. Select printer to edit slice settings.
Translated:Kein Drucker ausgewählt. Drucker wählen um Slice-Einstellungen zu bearbeiten.

English:Attempts to minimize the number of perimeter crossing. This can help with oozing or strings.
Translated:Versucht die Überschneidungen der Konturen zu vermeiden . Kann bei Propfbildung oder Fadenziehern helfen.

English:The shape of the physical print bed.
Translated:Form der Druckplatte.

English:The size of the print bed.
Translated:Größe der Druckplatte.

English:The temperature to set the bed to after the first layer has been printed. Set to 0 to eliminate bed temperature commands.
Translated:Druckplatten-Temperatur nach dem ersten Layer. Auf 0 setzen um die Einstellung zu deaktivieren.

English:How many layers will be solid filled on the bottom surfaces of the object.
Translated:Anzahl der vollständig ausgefüllten Layer am Objektboden.

English:Acceleration to during bridging. Set to 0 to disable changing the printer's acceleration.
Translated:Beschleunigung bei Spaltüberbrückung. Auf 0 setzen um die Einstellung zu deaktivieren.

English:The fan speed to use during bridging.
Translated:Lüfterdrehzahl bei Spaltüberbrückung.

English:This controls the ratio of material extruder during bridging.Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
Translated:Steuerung der Materialzugabe bei Spaltüberbrückung. Leichtes Absenken des Wertes bewirkt ein Langziehen des ausgestoßenen Materials, hier ist auch der Lüfter sehr hilfreich. 

English:The speed to move when bridging between walls.
Translated:Druck-Tempo bei Spaltüberbrückung zwischen Objektwänden.

English:The amount of brim that will be drawn around each object. This is useful to ensure that parts stay affixed to the bed.
Translated:Anzahl der Linien in der Krempe. Die Krempe bietet eine bessere Haftung des Objektes auf der Druckplatte.

English:The height of the printable area. If set to 0 the parts height will not be validated.
Translated:Höhe des Druckbereiches. Auf 0 setzen um die Einstellung zu deaktivieren.

English:Each individual part is printed to completion then the extruder is lowered back to the bed and the next part is printed.
Translated:Jedes Teil auf der Druckplatte wird für sich komplett fertig gedruckt, der Extruder fängt das nächste Teil danach wieder unten an.

English:Moves the extruder up off the part to allow cooling.
Translated:Bewegt den Extruder rauf um Kühlung zu ermöglichen.

English:Turns on and off all cooling settings (all settings below this one).
Translated:Ein-oder Ausschalten der Kühleinstellungen (siehe darunter)

English:Acceleration to use on all moves not defined above. Set to 0 to disable changing the printer's acceleration.
Translated:Beschleunigung für jene Bewegungen, bei welchen sie unten nicht definiert wurde. Auf 0 setzen um die Einstellung zu deaktivieren.

English:The number of layers for which the fan will be forced to remain off.
Translated:Layeranzahl bei welcher der Lüfter deaktiviert bleibt.

English:This gcode will be inserted at the end of all automatic output (the very end of the gcode commands).
Translated:Dieser G-Code wird ganz am Ende eingefügt (nach allen anderen Befehlen).

English:The speed to print the visible outside edges. This can be set explicitly or as a percentage of the Perimeters speed.
Translated:Das Tempo beim Drucken der sichtbaren, äusseren Konturen. Kann prozentual zur eigentlichen Kontur-Druckgeschwindigkeit eingestellt werden.

English:Normally external perimeters are printed last, this makes them go first.
Translated:Normalerweise werden die äusseren Konturen zuletzt gedruckt. Mit dieser Option aber zuerst.

English:Allow slicer to generate extra perimeters when needed for sloping walls.
Translated:Slicer erlauben zusätzlich Konturen zu generieren, wenn für schräge Flächen benötigt.

English:This is used to figure out how far apart individual parts must be printed to allow them to be completed before printing the next part.
Translated:Damit findet man heraus, wie weit die Teile voneinander entfernt sein müssen, um sie einzeln fertig zu drucken.

English:This is the offset of each extruder relative to the first extruder. Only useful for multiple extruder machines.
Translated:Koordinaten des zweiten Extruders, relativ zum Ersten Extruder. Nur bei Mehrfach-Extruder Systemen.
 
English:This is the identifier used in the gcode to specify the extruder.
Translated:Identifizierung des Extruders im G-Code.

English:All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good min value) will decrease the amount being extruded.
Translated:Die Extrudiergeschwindigkeit wird mit diesem Wert multipliziert. Ein Wert über 1 (1.1 ist ein guter max. Wert) steigert die Menge des zugeführten Materials; senkt man den Wert ab (.9 ist ein guter min. Wert) verringert man die Menge.

English:Leave this as 0 to allow automatic calculation of extrusion width.
Translated:Auf 0 belassen um eine automatische Berechnung der Materialzufuhr zu ermöglichen.

English:This will force the fan to remain on throughout the print. In general you should have this off and just enable auto cooling.
Translated:Hiermit wir der Lüfter permanent während des Druckvorgangs eingeschaltet. Normalerweise ist diese Einstellung deaktiviert und der Lüfter wird automatisch gesteuert.

English:If a layer is estimated to take less than this to print, the fan will be turned on.
Translated:Für den Fall, dass ein Layer schneller als angegeben gedruckt wird, wird der Lüfter aktiviert. 

English:This should be set to the actual diameter of the filament you are using on your printer. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
Translated:Eingabe des Filament-Durchmessers. Da dieser variieren kann, muß an mindestens 5 Stellen mit einem Meßschieber gemessen und daraus der Mittelwert errechnet werden.

English:Sets the starting angle of the infill. Not used when bridging.
Translated:Winkel beim Ausfüllen. Wird nicht bei Spaltüberbrückung aktiviert.

English:The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
Translated:Das Verhältnis der Füllung zum leeren Raum. 0 bedeutet keine Füllung; 1 ist komplett, massiv gefüllt. 

English:The pattern used on the inside portions of the print.
Translated:Muster für die Füllung.

English:Acceleration to use while printing the first layer. Set to 0 to the default first layer acceleration.
Translated:Beschleunigung beim Drucken des ersten Layers. Auf 0 setzen um die Grundeinstellung zu verwenden.

English:The temperature to set the bed to before printing the first layer. The printer will wait until this temperature has been reached before printing. Set to 0 to eliminate bed temperature commands.
Translated:Druckplatten-Temperatur beim ersten Layer. Der Drucker wartet bis die eingestellte Temperatur erreicht wurde. Auf 0 setzen um diese Einstellung zu deaktivieren.

English:Setting this to greater than 100% can often help the first layer have better adhesion to the print bed.
Translated:Eine Einstellung über 100% kann die Haftung des ersten Layers auf der Druckplatte verbessern.

English:Sets the height of the first layer. It is often desirable to print a taller first layer to ensure a good solid adhesion to the build plate.
Translated:Einstellung der Höhe des ersten Layers. Etwas höher gewählt, kann die Haftung auf der Druckplatte verbessert werden. 

English:The speed to move while printing the first layer.  If expressed as a percentage it will modify the corresponding speed set above.
Translated:Vorschubgeschwindigkeit beim Drucken des ersten Layers. Kann prozentual zum eigentlichen Drucktempo eingestellt werden.  

English:The temperature to set the extruder to before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.
Translated:Voreinstellung für die Extruder-Temperatur. Der Drucker druckt erst, wenn diese Temperatur erreicht wurde.

English:Use G0 for moves rather than G1.
Translated:G0 anstatt G1 für Bewegungen verwenden.

English:Speed to fill small gaps. Keep low to avoid vibration. Set to 0 to skip filling small gaps.
Translated:Geschwindigkeit beim Überbrücken kleiner Lücken. Niedriger Wert bedeutet weniger Vibrationen. Auf 0 setzen um diese Einstellung zu deaktivieren.

English:Use firmware arcs rather than multiple segments for curves.
Translated:Firmware-Eistellungen für Bögen verwenden anstatt Kurvenzüge in mehrere Segmente aufzuteilen.

English:Include detailed comments in the gcode.
Translated:Beschreibungen in den G-Code einbetten.

English:Some firmware use different g and m codes. Setting this ensures that the output gcode will use the correct commands.
Translated:Manche Firmware nutzt unterschiedliche G oder M-Codes. Mit dieser Einstellung verwendet der ausgegebene G-Code die korrekten Befehle.

English:Acceleration to use while infilling. Set to 0 to disable changing the printer's acceleration.
Translated:Beschleunigung beim Ausfüllen. Auf 0 setzen um diese Einstellung zu deaktivieren.

English:Sets which layers will receive infill. This should normally stay set to 1 to make strong parts.
Translated:Ausfüllen bei jedem n-ten Layer. Ist normalerweise auf 1 gesetzt, also JEDER Layer - bessere Stabilität der Teile.

English:The index of the extruder to use for infill.
Translated:Die Kennung des Extruders für die Füllung.

English:Sets infill to happen before perimeters are created.
Translated:Die Füllung wird vor dem Drucken der Konturen ausgeführt.

English:Creates infill only where it will be used as internal support.
Translated:Füllung wird nur bei Bedarf einer internen Stütze generiert.

English:The speed to print infill.
Translated:Geschwindigkeit beim Ausfüllen.

English:This gcode will be inserted right after the change in z height for the next layer.
Translated:Dieser G-Code wird nach dem Wechsel in Z, vor den nächsten Layer eingefügt.

English:Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.
Translated:Einstellung der Layer-Höhe. Kleinerer Wert ergibt mehr Layer und bessere Genauigkeit in der Z-Richtung, der Druck dauert aber länger.

English:This is the maximum speed that your fan can run at.
Translated:Maximale Drehzahl des verwendeten Lüfters.

English:This is the minimum amount of filament that must be extruded before a rectarction can occure.
Translated:Minimum an extrudiertem Material bevor es eingezogen werden kann.

English:This is the minimum fan speed that your fan can run at.
Translated:Minimale Drehzahl des verwendeten Lüfters.

English:This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the min layer time.
Translated:Bis zu dieser Geschwindigkeit wird herunterreduziert um die voreingestellte minimale Layer-Druckzeit zu überschreiten.

English:Sets the minimum amount of filament to use drawing the skirt loops. This will cause at least enough skirt loops to be drawn to use this amount of filament.
Translated:Minimum an verwendetem Material beim erzeugen der nicht zum Modell gehörenden Kontur. Dies generiert die Anzahl der Umrundungen angepasst an diese Materialmenge.

English:These notes will be added as comments in the header of the output gcode.
Translated:Dieser Vermerk wird im ausgegebenen G-Code angezeigt.

English:This is the diameter of your extruder nozle.
Translated:Durchmesser der Extruderdüse.

English:Prevents retraction while within a printing perimeter.
Translated:Blockiert Filamenteinzug während des Kontur-Drucks.

English:This will lower the temperature of the non-printing extruder to help prevent oozing.
Translated:Hier wird die Temperatur des nicht verwendeten Extruders gesenkt um ein Herausquellen des Materials zu verhindern.

English:Experimental feature that attempts to improve overhangs using the fan and bridge settings.
Translated:Experimentelle Option, die versucht Überhange mithilfe von Lüfter-und Überbrückungseinstellungen zu drucken.

English:Sets the way that slicer creates file names (this is not used by MatterControl).
Translated:Art der Benennung der Dateien durch Slic3r (wird nicht von MatterControl verwendet).

English:Acceleration to use on perimeters. Set to 0 to disable changing the printer's acceleration.
Translated:Beschleunigung beim Konturendruck. Auf 0 setzen um diese Einstellung zu deaktivieren.

English:The index of the extruder to use for perimeters.
Translated:Die Kennung des Extruders für Konturendruck.

English:Sets the default movement speed while printing perimeters.
Translated:Stellt den voreingestellten Geschwindigkeitswert während des Konturdrucks ein.

English:The number of external layers or shells to create.
Translated:Anzahl der zu erzeugenden äusseren Layer oder Schalen.

English:You can include additional programs to process the gcode after slicer is finished. The complete path of the program to run should be included here.
Translated:Es können noch andere Anwendungen zum Erstellen des G-Codes verwendet werden nach der Ausgabe durch Slic3r. Der Pfad zur Anwendung sollte hier eingefügt werden. 

English:The position (coordinates) of the center of the print bed.
Translated:Die Position (Koordinaten) der Mitte der Druckplatte.

English:Number of layers to print before printing any parts.
Translated:Anzahl der zu erzeugenden Layer vor dem eigentlichen Druck.

English:Start each new layer from a different vertex to reduce seams.
Translated:Starte neuen Layer an einer anderen Ecke um Überwälzungen zu vermeiden.

English:The minimum distance of a non-printing move that will result in a retraction.
Translated:Die minimale Entfernung bei Bewegungen ohne zu Drucken, die zum Einzug des Materials führt.

English:If set, a retraction will occur prior to changing the layer height.
Translated:Wenn eingestellt, wird der Einzug des Materials vorrangig beim Layerwechsel erfolgen.

English:The amount that the filament will be reversed after each qualifying non-printing move.
Translated:The amount that the filament will be reversed after each qualifying non-printing move.

English:The amount that the filament will be reversed before changing to a new tool.
Translated:Die Menge an eingezogenem Material vor dem Wechsel des Extruders.

English:The amount the extruder head will be lifted after each retraction.
Translated:Der Weg des Extruders beim Bewegen nach jedem Materialeinzug.

English:The amount the filament will be retracted when changing to a different extruder.
Translated:Die Menge an zurückgezogenem Material beim Extruderwechsel.

English:No updates are currently available.
Translated:Es sink momentan keine Updates verfügbar.

English:Additional amount of filament that will be extruded after a retraction.
Translated:Zusätzliche Menge an Material, die nach einem Materialeinzug extrudiert wird.

English:The amount of extra extrusion that will occur when an extruder is selected.
Translated:Die Menge an Material, die nach einer Extruderauswahl zusätzlich extrudiert wird.

English:The speed that the filament will be retracted (and re-extruded).
Translated:Die Geschwindigkeit, mit der das Material eingezogen (und extrudiert) wird.

English:The minimum feature size to consider from the model. Leave at 0 to use all the model detail.
Translated:Die minimale Detailgenauigkeit beim Drucken. Auf 0 belassen für originalgetreue Modelldetails.

English:The distance to start drawing the first skirt loop.
Translated:Abstand vom Modell zum Drucken der ersten Kontur, die nicht zum Modell gehört.

English:The number of layers to draw the skirt.
Translated:Anzahl der Layers für diese Kontur.

English:The number of loops to draw around all the parts on the bed.
Translated:Anzahl der Umrundungen, die vor dem Drucken um alle Teile gezogen werden.

English:If a layer is estimated to take less than this to print, the movement speed will be reduced to try and make the layer take this long to print.
Translated:Wenn das Drucken länger dauert als hier, wird die Geschwindigkeit runtergeregelt und versucht den Layer in längerer Zeit zu drucken.

English:Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.
Translated:Wird bei kleinen Konturen verwendet (normalerweise Löcher). Kann auch prozentual zur Druckgeschwindigkeit von Konturen eingestellt werden.

English:The pattern used on the bottom and top layers of the print.
Translated:Druckmuster beim Drucken der untersten und der obersten Layer. 

English:Forces solid infill for any area less than this amount.
Translated:Jeder Bereich, kleiner als dieser Wert wird komplett, massiv gefüllt.

English:Sets how often a layer will be forced to be solid infilled. Zero will result in normal infill throughout.
Translated:Einstellung, die bestimmt wie oft versucht wird einen Layer komplett gefüllt zu drucken. Auf 0 setzen um diese Einstellung zu deaktivieren.

English:The speed to print infill when completely solid. This can be set explicitly or as a percentage of the Infill speed.
Translated:Die Druckgeschwindigkeit bei massiven Modellen. Kann auch prozentual zur eigentlicher Füllgeschwindigkeit eingestellt werden.

English:Force the print to have only one layer and gradually increase the extruder height during the print. Only one part can be printed at a time with this feature.
Translated:Forciert den 1-Layer-Druck während stufenweise der Extruder angehoben wird. Damit können mehrere Teile nicht gleichzeitig gedruckt werden..

English:This is the amount to lower the temperature of an extruder that is not currently printing.
Translated:Bei diesem Wert wird die Temperatur des Extruders, der momentan nicht druckt, gesenkt.
 
English:This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [first_layer_temperature].
Translated:Dieser G-Code wird nach der Temperatureinstellung eingefügt. Wenn in diesem Bereich bereits Temperatureinstellungen vorgenommen wurden, werden keine Einstellungen woanders vorgenommen. Es können auch Temperaturen von anderen Einstellungen eingefügt werden, zB. [first_layer_temperature].                                                                                             

English:Make sure the first point on a perimeter is a concave point.
Translated:Stellt sicher, dass der Anfang einer Kontur an einem konkaven Punkt liegt.

English:Make sure the first point on a perimeter is not an overhang.
Translated:Stellt sicher, dass der Anfang einer Kontur nicht auf einem Überhang liegt.

English:The starting angle of the supports.
Translated:Anfangswinkel der Überhänge für den Druck mit Stützmaterial.

English:Create support where needed on internal features.
Translated:Erzeuge Stützmaterial an internen Details wenn nötig.

English:Generate support material everywhere not touching the bed for n layers, regardless of angle.
Translated:Erzeuge Stützmaterial überall dort, wo das Modell nicht auf der Druckplatte liegt, unabhängig vom Winkel.

English:The index of the extruder to use for support material.
Translated:Die Kennung des Extruders für den Stützendruck.

English:The index of the extruder to use for support material interface layers.
Translated:Die Kennung des Extruders für Verbindungslayer zwischen Modell und Stützmaterial.

English:The number of layers to print between the supports and the part.
Translated:Die Anzahl der Verbindungslayer zwischen Modell und Stützmaterial.

English:The space between lines of the interface layers (0 is solid).
Translated:Abstand zwischen den Linien der Verbindungslayer (0 bedeutet kein Abstand, massiv).

English:The pattern used while generating support material.
Translated:Das Muster für den Druck vom Stützmaterial.

English:The space between the lines of he support material.
Translated:Abstand zwischen den Linien des Stützmaterials.

English:The speed to print support material structures.
Translated:Die Druckgeschwindigkeit beim Drucken des Stützmaterials.

English:The last angle at which support material will be generated. Larger numbers will result in more support. Set to 0 to enable automatic settings.
Translated:Der grösste Winkel, bei dem Stützmaterial generiert wird. Höhere Werte bedeuten mehr Stützmaterial. Auf 0 setzen um automatische Einstellung zu verwenden.

English:The distance the support material will be from the object in the x and y direction.
Translated:Der Abstand vom Modell zum Stützmaterial in der X und Y Richtung.

English:The distance the support material will be from the object in the z direction.
Translated:Der Abstand vom Modell zum Stützmaterial in der Z Richtung.

English:This turns on and off the generation of support material.
Translated:Hier wird die Stützmaterial-Funktion ein bzw. ausgeschaltet.

English:The temperature to set the extruder to after the first layer has been printed.
Translated:Die Temperatur des Extruders nach dem Druck des ersten Layers.

English:Detect when walls are too close together and need to be extruded as just one wall.
Translated:Diese Funktion erkennt, wenn Wände bzw. Konturen zu dicht zusammenliegen und erzeugt daraus eine einzelne.

English:The number of CPU cores to use while doing slicing. Increasing this can slow down your machine.
Translated:Anzahl der Prozessorkerne des Rechners, die beim Layererzeugen verwendet werden. Höhersetzen kann den Prozess verlangsamen.

English:This gcode will be inserted after every tool change.
Translated:Dieser G-Code wird bei jedem Extruderwechsel eingefügt.

English:The speed to print the top infill. This can be set explicitly or as a percentage of the Infill speed.
Translated:Die Druckgeschwindigkeit beim Ausfüllen der obersten Layers. Kann auch prozentual zur eigentlichen Ausfüllgeschwindigkeit eingestellt werden.

English:How many layers will be solid filled on the top surfaces of the object.
Translated:Anzahl der Layer am oberen Ende des Modells, die komplett gefüllt werden.

English:Speed to move when not extruding material.
Translated:Vorschubgeschwindigkeit wenn kein Material extrudiert wird.

English:Request the firmware to do retractions rather than specify the extruder movements directly.
Translated:Für den Materialeinzug werden die Firmware-Einstellungen, anstatt Direkteingabe verwendet.

English:Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.
Translated:Normalerweise verwenden Drucker Absolutbemassung. Diese Einstellung nur dann verwenden wenn der Drucker relative Masse benötigt.

English:This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.
Translated:Diese Einstellung hilft dabei die Vibrationen beim Drucken zu reduzieren. Kann helfen wenn der Drucker eine Resonanz-Frequenz entwickelt, die Schwierigkeiten oder Aufschaukeln verursacht. 

English:This will cause the extruder to move while retracting to minimize blobs.
Translated:Damit bewegt sich der Extruder beim Materialeinzug um Tropfenbildung zu vermeiden.

English:This value will be added to all of the z positions of the created gcode.
Translated:Dieser Wert wird bei allen Z positionen im erstellten G-Code eingefügt.

English:Print
Translated:Drucken

English:Layers/Perimeters
Translated:Layer/Konturen

English:Layer Height
Translated:Layerhöhe

English:Perimeters (minimum)
Translated:Konturen (Minimalanzahl)

English:Vertical Shells
Translated:Senkrechte Schalen

English:Infill
Translated:Füllung

English:Fill Density
Translated:Fülldichte

English:Fill Pattern
Translated:Füllmuster

English:Support Material
Translated:Stützmaterial

English:Generate Support Material
Translated:Stützmaterial erzeugen

English:Filament
Translated:Filament

English:Diameter
Translated:Durchmesser

English:Extrude First Layer
Translated:Ersten Layer extrudieren

English:Extruder Other Layers
Translated:Andere Layer extrudieren

English:Bed First Layer
Translated: Druckplatte erster Layer

English:Bed Other Layers
Translated:Druckplatte übrige Layer

English:Temperature (<28>C)
Translated:Temperatur (<28>C)

English:Cooling
Translated:Kühlung

English:Enable Auto Cooling
Translated:Autom. Kühlung AN

English:Enable
Translated:EIN

English:Printer
Translated:Drucker

English:General
Translated:Allgemein

English:Bed Size
Translated:Druckplattengrösse

English:Print Center
Translated:Druckplattenmitte

English:Build Height
Translated:Bauraum Höhe

English:Size and Coordinates
Translated:Grösse und Koordinaten

English:Extruder 1
Translated:Extruder 1

English:Nozzle Diameter
Translated:Düsendurchmesser

English:Size
Translated:Grösse

English:Configuration
Translated:Konfiguration

English:EEProm Settings
Translated:EEProm Einstellungen

English:CONFIGURE
Translated:KONFIGURIEREN

English:Automatic Calibration
Translated:Autom. Kalibration

English:ENABLE
Translated:EIN

English:DISABLE
Translated:AUS

English:Enable Automatic Print Leveling
Translated:Autom. Druckplattenausrichtung einschalten

English:Automatic Print Leveling (disabled)
Translated:Autom. Druckplattenausrichtung (aus)

English:Extruder Temperature
Translated:Extrudertemperatur

English:View Manual Printer Controls and Slicing Settings
Translated:Zur manuellen Druckersteuerung und Slicing-Einstellungen

English:View Queue and Library
Translated:Zur Druckliste und Teilesammlung 

English:Bed Temperature
Translated:Druckplatten-Temperatur

English:This gcode will be inserted when the print is canceled.
Translated:Dieser G-Code wird beim Abbruch des Drucks eingefügt.

English:This gcode will be inserted when the printer is paused.
Translated:Dieser G-Code wird beim pausieren des Drucks eingefügt.

English:This gcode will be inserted when the printer is resumed.
Translated:Dieser G-Code wird bei der Wiederaufnahme des Drucks eingefügt.

English:Print Time
Translated:Druckzeit

English:Filament Length
Translated:Filamentlänge

English:Filament Volume
Translated:Filamentvolumen

English:Weight
Translated:Gewicht

English:Show Grid
Translated:Gitter Anzeigen

English:Show Moves
Translated:Bewegungen anzeigen

English:Show Retractions
Translated:Einzugstellen anzeigen

English:Go
Translated:Los!

English:start:
Translated:start:

English:end:
Translated:ende:

English:Stop trying to connect to the printer.
Translated:Stop trying to connect to the printer.

English:No printer selected.  Press 'Connect' to choose a printer.
Translated:No printer selected.  Press 'Connect' to choose a printer.

English:About
Translated:About

English:This controls the ratio of material extruder during bridging. Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.
Translated:This controls the ratio of material extruder during bridging. Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.

English:There is a recommended update available.
Translated:There is a recommended update available.

English:Layer View
Translated:Layer View

English:Connect to Printer
Translated:Connect to Printer

English:Choose a 3D Printer Configuration
Translated:Choose a 3D Printer Configuration

English:Unavailable
Translated:Unavailable

English:Refresh
Translated:Refresh

English:Automatic Print Leveling (enabled)
Translated:Automatic Print Leveling (enabled)

English:Connecting
Translated:Connecting

English:Status: {0} - {1}
Translated:Status: {0} - {1}

English:edit
Translated:edit

English:remove
Translated:remove

English:Printer Name
Translated:Printer Name

English:(refresh)
Translated:(refresh)

English:Serial Port
Translated:Serial Port

English:Baud Rate
Translated:Baud Rate

English:Other
Translated:Other

English:Printer Make
Translated:Printer Make

English:Printer Model
Translated:Printer Model

English:Auto Connect
Translated:Auto Connect

English:Preparing To Print
Translated:Preparing To Print

English:Preparing to slice model
Translated:Preparing to slice model

English:Printing
Translated:Printing

English:Filter Output
Translated:Filter Output

English:Auto Uppercase
Translated:Auto Uppercase

English:Send
Translated:Send

English:MatterControl - Terminal
Translated:MatterControl - Terminal

English:First Layer Height
Translated:First Layer Height

English:Spiral Vase
Translated:Spiral Vase

English:Number of Solid Layers\non the Top:
Translated:Number of Solid Layers\non the Top:

English:Number of Solid Layers\non the Bottom:
Translated:Number of Solid Layers\non the Bottom:

English:Horizontal Shells
Translated:Horizontal Shells

English:Speed
Translated:Speed

English:Perimeters
Translated:Perimeters

English:Speed for Print Moves
Translated:Speed for Print Moves

English:Travel
Translated:Travel

English:Speed for non Print Moves
Translated:Speed for non Print Moves

English:First Layer Speed
Translated:First Layer Speed

English:Modifiers
Translated:Modifiers

English:Skirt and Brim
Translated:Skirt and Brim

English:Loops
Translated:Loops

English:Distance from Object
Translated:Distance from Object

English:Minimum Extrusion Length
Translated:Minimum Extrusion Length

English:Skirt
Translated:Skirt

English:Overhang Threshold
Translated:Overhang Threshold

English:Pattern Spacing
Translated:Pattern Spacing

English:X and Y Distance
Translated:X and Y Distance

English:Z Distance
Translated:Z Distance

English:Internal Support
Translated:Internal Support

English:Notes
Translated:Notes

English:Output Options
Translated:Output Options

English:Multiple Extruders
Translated:Multiple Extruders

English:Advanced
Translated:Advanced

English:Enable Extruder Lift
Translated:Enable Extruder Lift

English:Min Fan Speed
Translated:Min Fan Speed

English:Max Fan Speed
Translated:Max Fan Speed

English:Disable Fan For The First
Translated:Disable Fan For The First

English:Fan Speed
Translated:Fan Speed

English:Slow Down If Layer Print\nTime Is Below
Translated:Slow Down If Layer Print\nTime Is Below

English:Cooling Thresholds
Translated:Cooling Thresholds

English:Bed Shape
Translated:Bed Shape

English:Custom G-Code
Translated:Custom G-Code

English:Start G-Code
Translated:Start G-Code

English:End G-Code
Translated:End G-Code

English:Length
Translated:Length

English:Minimum Travel After\nRetraction
Translated:Minimum Travel After\nRetraction

English:Min Extrusion
Translated:Min Extrusion

English:Retraction
Translated:Retraction

English:Generate Extra Perimeters\nWhen Needed:
Translated:Generate Extra Perimeters\nWhen Needed:

English:Avoid Crossing Perimeters
Translated:Avoid Crossing Perimeters

English:Start At Concave Points
Translated:Start At Concave Points

English:Start At Non Overhang
Translated:Start At Non Overhang

English:Thin Walls
Translated:Thin Walls

English:Quality (slower slicing)
Translated:Quality (slower slicing)

English:Randomize Starting Points
Translated:Randomize Starting Points

English:External Perimeters First
Translated:External Perimeters First

English:Top/Bottom Fill Pattern
Translated:Top/Bottom Fill Pattern

English:Infill Every
Translated:Infill Every

English:Only Infill Where Needed
Translated:Only Infill Where Needed

English:Solid Infill Every
Translated:Solid Infill Every

English:Fill Angle
Translated:Fill Angle

English:Solid Infill Threshold Area
Translated:Solid Infill Threshold Area

English:Only Retract When\nCrossing Perimeters
Translated:Only Retract When\nCrossing Perimeters

English:Do Infill Before Perimeters
Translated:Do Infill Before Perimeters

English:Small Perimeters
Translated:Small Perimeters

English:External Perimeters
Translated:External Perimeters

English:Solid Infill
Translated:Solid Infill

English:Top Solid Infill
Translated:Top Solid Infill

English:Bridges
Translated:Bridges

English:Gap Fill
Translated:Gap Fill

English:Min Print Speed
Translated:Min Print Speed

English:Bridge
Translated:Bridge

English:First Layer
Translated:First Layer

English:Default
Translated:Default

English:Acceleration Control
Translated:Acceleration Control

English:Skirt Height
Translated:Skirt Height

English:Brim Width
Translated:Brim Width

English:Brim
Translated:Brim

English:Enforce Support For First
Translated:Enforce Support For First

English:Raft Layers
Translated:Raft Layers

English:Raft
Translated:Raft

English:Pattern
Translated:Pattern

English:Pattern Angle
Translated:Pattern Angle

English:Interface Layers
Translated:Interface Layers

English:Interface Pattern Spacing
Translated:Interface Pattern Spacing

English:Complete Individual Objects
Translated:Complete Individual Objects

English:Extruder Clearance Height
Translated:Extruder Clearance Height

English:Extruder Clearance Radius
Translated:Extruder Clearance Radius

English:Sequential Printing
Translated:Sequential Printing

English:Verbose G-Code
Translated:Verbose G-Code

English:Output File Name Format
Translated:Output File Name Format

English:Output File
Translated:Output File

English:Post-Processing Scripts
Translated:Post-Processing Scripts

English:Perimeter Extruder
Translated:Perimeter Extruder

English:Infill Extruder
Translated:Infill Extruder

English:Support Material Extruder
Translated:Support Material Extruder

English:Support Interface Extruder
Translated:Support Interface Extruder

English:Extruders
Translated:Extruders

English:Temp Lower Amount
Translated:Temp Lower Amount

English:Ooze Prevention
Translated:Ooze Prevention

English:Default Extrusion Width
Translated:Default Extrusion Width

English:Extrusion Width
Translated:Extrusion Width

English:Bridge Flow Ratio
Translated:Bridge Flow Ratio

English:Flow
Translated:Flow

English:Threads
Translated:Threads

English:Resolution
Translated:Resolution

English:Extrusion Axis
Translated:Extrusion Axis

English:Optimize Overhangs
Translated:Optimize Overhangs

English:Keep Fan Always On
Translated:Keep Fan Always On

English:Bridging Fan Speed
Translated:Bridging Fan Speed

English:Enable Fan If Layer\nPrint Time Is Below
Translated:Enable Fan If Layer\nPrint Time Is Below

English:Z Offset
Translated:Z Offset

English:G-Code Flavor
Translated:G-Code Flavor

English:Use Relative E Distances
Translated:Use Relative E Distances

English:Use Arcs
Translated:Use Arcs

English:Use G0
Translated:Use G0

English:Firmware
Translated:Firmware

English:Use Firmware Retraction
Translated:Use Firmware Retraction

English:Vibration Limit
Translated:Vibration Limit

English:Layer Change G-Code
Translated:Layer Change G-Code

English:Tool Change G-Code
Translated:Tool Change G-Code

English:Pause G-Code
Translated:Pause G-Code

English:Resume G-Code
Translated:Resume G-Code

English:Cancel G-Code
Translated:Cancel G-Code

English:Extruder Offset
Translated:Extruder Offset

English:Position (for multi-extrude printers)
Translated:Position (for multi-extrude printers)

English:Change Tool
Translated:Change Tool

English:Z Lift
Translated:Z Lift

English:Extra Length On Restart
Translated:Extra Length On Restart

English:Retract on Layer Change
Translated:Retract on Layer Change

English:Wipe Before Retract
Translated:Wipe Before Retract

English:Retraction When Tool is Disabled (for multi-extruders)
Translated:Retraction When Tool is Disabled (for multi-extruders)

English:Paused
Translated:Paused

English:Printing Paused
Translated:Printing Paused

English:Ok
Translated:Ok

English:Finished Print
Translated:Finished Print

English:Done Printing
Translated:Done Printing

English:Save As
Translated:Save As

English:Installed Plugins
Translated:Installed Plugins

English:Select a Design Tool
Translated:Select a Design Tool

English:Temperature (C)
Translated:Temperature (C)

English:Language Settings
Translated:Language Settings

English:Select Model
Translated:Select Model

English:Theme Settings
Translated:Theme Settings

English:New updates are ready to install.
Translated:New updates are ready to install.

English:Select Language
Translated:Select Language

English:File not found on disk.
Translated:File not found on disk.

English:Not connected. Press 'Connect' to enable printing.
Translated:Not connected. Press 'Connect' to enable printing.

English:Loading Parts
Translated:Loading Parts

English:CONNECT
Translated:CONNECT

English:DISCONNECT
Translated:DISCONNECT

English:OPTIONS
Translated:OPTIONS

English:QUEUE
Translated:QUEUE

English:STATUS
Translated:STATUS

English:CONTROLS
Translated:CONTROLS

English:SLICE SETTINGS
Translated:SLICE SETTINGS

English:CONFIGURATION
Translated:CONFIGURATION

English:MODEL
Translated:MODEL

English:LAYER
Translated:LAYER

English:DISPLAY
Translated:DISPLAY

English:PRINT TIME
Translated:PRINT TIME

English:FILAMENT LENGTH
Translated:FILAMENT LENGTH

English:FILAMENT VOLUME
Translated:FILAMENT VOLUME

English:WEIGHT
Translated:WEIGHT

English:EST. WEIGHT
Translated:EST. WEIGHT

English:Saving
Translated:Saving

English:Export File
Translated:Export File

English:File export options
Translated:File export options

English:Export as
Translated:Export as

English:Show file in folder after save
Translated:Show file in folder after save

English:HISTORY
Translated:HISTORY

English:LIBRARY
Translated:LIBRARY

English:Developed By: 
Translated:Developed By: 

English: to help support MatterControl.
Translated: to help support MatterControl.

English:ABOUT
Translated:ABOUT

English:Oops! Could not find this file
Translated:Oops! Could not find this file

English:Would you like to remove it from the queue
Translated:Would you like to remove it from the queue

English:Item not Found
Translated:Item not Found

English:Yes
Translated:Yes

English:No
Translated:No

English:History
Translated:History

English:Slicing Error. Please review your slice settings.
Translated:Slicing Error. Please review your slice settings.

English:Quality
Translated:Quality

English:First Layer Height' must be less than or equal to the 'Nozzle Diameter'.
Translated:First Layer Height' must be less than or equal to the 'Nozzle Diameter'.

English:This will cause the print to be centered on the bed. Disable this if you know your models have been created where you want them to print.
Translated:This will cause the print to be centered on the bed. Disable this if you know your models have been created where you want them to print.

English:Center On Bed
Translated:Center On Bed

English:Center Print
Translated:Center Print

English:Note
Translated:Note

English:To enable GCode export, select a printer profile.
Translated:To enable GCode export, select a printer profile.

English:The amount to remove from the bottom of the model
Translated:The amount to remove from the bottom of the model

English:The amount the infill edge will push into the preimiter. Helps ensure the infill is connected to the edge.
Translated:The amount the infill edge will push into the preimiter. Helps ensure the infill is connected to the edge.

English:The distance to start drawing the first skirt loop. Make this 0 to create an anchor for the part to the bed.
Translated:The distance to start drawing the first skirt loop. Make this 0 to create an anchor for the part to the bed.

English:Bottom Clip
Translated:Bottom Clip

English:Infill Overlap
Translated:Infill Overlap

English:Inside Perimeters
Translated:Inside Perimeters

English:Outside Perimeter
Translated:Outside Perimeter

English:Sets the default movement speed while printing inside perimeters.
Translated:Sets the default movement speed while printing inside perimeters.

English:The type of support to create for surfaces that need it.
Translated:The type of support to create for surfaces that need it.

English:Support Type
Translated:Support Type

English:Top & Bottom Layers
Translated:Top & Bottom Layers

English:
Translated:

English:gcode_output_type
Translated:gcode_output_type

English:Starting Angle
Translated:Starting Angle

English:The space between the lines of the support material.
Translated:The space between the lines of the support material.

English:The last angle at which support material will be generated. Larger numbers will result in more support.
Translated:The last angle at which support material will be generated. Larger numbers will result in more support.

English:Add Printer
Translated:Add Printer

English:If greater than 0, this is the distance away from parts to create a parimeter to wipe when entering.
Translated:If greater than 0, this is the distance away from parts to create a parimeter to wipe when entering.

English:Wipe Shield Dist
Translated:Wipe Shield Dist

English:Wipe Shield
Translated:Wipe Shield

English:  Remove All
Translated:  Remove All

English:The number of layers to skip in z. The gap between the support and the model.
Translated:The number of layers to skip in z. The gap between the support and the model.

English:Z Gap
Translated:Z Gap

English:Print Again
Translated:Print Again

English:Turns on and off the creation of a raft which can help parts adhear to the bed.
Translated:Turns on and off the creation of a raft which can help parts adhear to the bed.

English:Enable Raft
Translated:Enable Raft

English:Create Raft
Translated:Create Raft

English:The amount of overhangs to support. 0 is no support 100 is support every overhang regardless of angle.
Translated:The amount of overhangs to support. 0 is no support 100 is support every overhang regardless of angle.

English:Overhang Percent
Translated:Overhang Percent

English:support_material_overhang_percent
Translated:support_material_overhang_percent

English:Device
Translated:Device

English:Material
Translated:Material

English:Item
Translated:Item

English:Wipe Shield Distance
Translated:Wipe Shield Distance

English: Remove All
Translated: Remove All

English:Slice Presets Editor
Translated:Slice Presets Editor

English:Attempting to Connect
Translated:Attempting to Connect

English:Making Copy
Translated:Making Copy

English:Arranging Parts
Translated:Arranging Parts

English:Only Show Completed
Translated:Only Show Completed

English:Show Timestamp
Translated:Show Timestamp

English:Render Type
Translated:Render Type

English:Shaded
Translated:Shaded

English:Outlines
Translated:Outlines

English:Polygons
Translated:Polygons

English:New updates may be available.
Translated:New updates may be available.

English:Unable to communicate with printer.
Translated:Unable to communicate with printer.

English:Item selected. Press 'Start' to begin your print.
Translated:Item selected. Press 'Start' to begin your print.

English:Disconnecting
Translated:Disconnecting

English:Leveling Settings
Translated:Leveling Settings

English:Movement Speeds Presets
Translated:Movement Speeds Presets

English:Axis
Translated:Axis

English:Sampled Positions
Translated:Sampled Positions

English:Position
Translated:Position

English:Do not show this again
Translated:Do not show this again

English:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do.  They are not modified by SliceSettings and my not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?
Translated:The file you are attempting to print is a GCode file.\n\nGCode files tell your printer exactly what to do.  They are not modified by SliceSettings and my not be appropriate for your specific printer configuration.\n\nOnly print from GCode files if you know they mach your current printer and configuration.\n\nAre you sure you want to print this GCode file?

English:Cannot find\n'{0}'.\nWould you like to remove it from the queue?
Translated:Cannot find\n'{0}'.\nWould you like to remove it from the queue?

English:Item not found
Translated:Item not found

English:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.
Translated:Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.

English:'Home' the printer
Translated:'Home' the printer

English:Sample the bed at three points
Translated:Sample the bed at three points

English:Turn auto leveling on
Translated:Turn auto leveling on

English:You should be done in about 3 minutes.
Translated:You should be done in about 3 minutes.

English:Click 'Next' to continue.
Translated:Click 'Next' to continue.

English:The printer should now be 'homing'. Once it is finished homing we will move it to the first point to sample.\n\nTo complete the next few steps you will need
Translated:The printer should now be 'homing'. Once it is finished homing we will move it to the first point to sample.\n\nTo complete the next few steps you will need

English:A standard sheet of paper
Translated:A standard sheet of paper

English:We will use this paper to measure the distance between the extruder and the bed.\n\nClick 'Next' to continue.
Translated:We will use this paper to measure the distance between the extruder and the bed.\n\nClick 'Next' to continue.

English:Congratulations!\n\nAuto Print Leveling is now configured and enabled.
Translated:Congratulations!\n\nAuto Print Leveling is now configured and enabled.

English:Remove the paper
Translated:Remove the paper

English:If in the future you wish to turn Auto Print Leveling off, you can uncheck the 'Enabled' button found in 'Advanced Settings'->'Printer Controls'.\n\nClick 'Done' to close this window.
Translated:If in the future you wish to turn Auto Print Leveling off, you can uncheck the 'Enabled' button found in 'Advanced Settings'->'Printer Controls'.\n\nClick 'Done' to close this window.

English:Step
Translated:Step

English:of
Translated:of

English:Print Leveling Wizard
Translated:Print Leveling Wizard

English:Back
Translated:Back

English:Next
Translated:Next

English:Low Precision
Translated:Low Precision

English:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.
Translated:Using the [Z] controls on this screen, we will now take a coarse measurement of the extruder height at this position.

English:Place the paper under the extruder
Translated:Place the paper under the extruder

English:Using the above contols
Translated:Using the above contols

English:Press [Z-] until there is resistance to moving the paper
Translated:Press [Z-] until there is resistance to moving the paper

English:Press [Z+] once to release the paper
Translated:Press [Z+] once to release the paper

English:Finally click 'Next' to continue.
Translated:Finally click 'Next' to continue.

English:This part of your bed is too low for the extruder to reach it. You need to raise your bed, or lower your limit, for print leveling to work.
Translated:This part of your bed is too low for the extruder to reach it. You need to raise your bed, or lower your limit, for print leveling to work.

English:Waring Moving Too Low
Translated:Waring Moving Too Low

English:Medium Precision
Translated:Medium Precision

English:We will now refine our measurement of the extruder height at this position.
Translated:We will now refine our measurement of the extruder height at this position.

English:High Precision
Translated:High Precision

English:We will now finalize our measurement of the extruder height at this position.
Translated:We will now finalize our measurement of the extruder height at this position.

English:Press [Z-] one click PAST the first hint of resistance
Translated:Press [Z-] one click PAST the first hint of resistance

English:Save Parts Sheet
Translated:Save Parts Sheet

English:MatterContol
Translated:MatterContol

English:Saving to Parts Sheet
Translated:Saving to Parts Sheet

English:The default temperature to set the bed to. Can sometimes be overriden on the first layer. Set to 0 to eliminate bed temperature commands.
Translated:The default temperature to set the bed to. Can sometimes be overriden on the first layer. Set to 0 to eliminate bed temperature commands.

English:The default temperature to set the extruder to. Can sometimes be overriden on the first layer.
Translated:The default temperature to set the extruder to. Can sometimes be overriden on the first layer.

English:Macro Editor
Translated:Macro Editor

English:Macro Presets
Translated:Macro Presets

English:Edit Macro
Translated:Edit Macro

English:Macro Name
Translated:Macro Name

English:Give your macro a name
Translated:Give your macro a name

English:Macro Commands
Translated:Macro Commands

English:This should be in 'Gcode'
Translated:This should be in 'Gcode'

English:3D Printer Setup
Translated:3D Printer Setup

English:Give your printer a name.
Translated:Give your printer a name.

English:Select Make
Translated:Select Make

English:Select the printer manufacturer
Translated:Select the printer manufacturer

English:Select the printer model
Translated:Select the printer model

English:Save & Continue
Translated:Save & Continue

English:MatterControl will now attempt to auto-detect printer.
Translated:MatterControl will now attempt to auto-detect printer.

English:Disconnect printer
Translated:Disconnect printer

English:if currently connected
Translated:if currently connected

English:Press
Translated:Press

English:Continue
Translated:Continue

English:Manual Configuration
Translated:Manual Configuration

English:Setup Manual Configuration
Translated:Setup Manual Configuration

English:or
Translated:or

English:Skip Printer Connection
Translated:Skip Printer Connection

English:You can either
Translated:You can either

English:You can also
Translated:You can also

English:Extruder Temperature Settings
Translated:Extruder Temperature Settings

English:Temperature Shortcut Presets
Translated:Temperature Shortcut Presets

English:Label
Translated:Label

English:Preset
Translated:Preset

English:Max Temp.
Translated:Max Temp.

English:Bed Temperature Settings
Translated:Bed Temperature Settings

English:Movement Speeds
Translated:Movement Speeds

English:Extruder
Translated:Extruder

English:Power on and connect printer
Translated:Power on and connect printer

English:Attempting to connect
Translated:Attempting to connect

English:Connection succeeded
Translated:Connection succeeded

English:You cannot move any lower. This position on your bed is too low for the extruder to reach. You need to raise your bed, or adjust your limits to allow the extruder to go lower.
Translated:You cannot move any lower. This position on your bed is too low for the extruder to reach. You need to raise your bed, or adjust your limits to allow the extruder to go lower.

English:Edit Preset
Translated:Edit Preset

English:Slice-Engine
Translated:Slice-Engine