414 lines
No EOL
12 KiB
C#
414 lines
No EOL
12 KiB
C#
/*
|
|
Copyright (c) 2019, Lars Brubaker, John Lewin
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
|
|
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
The views and conclusions contained in the software and documentation are those
|
|
of the authors and should not be interpreted as representing official policies,
|
|
either expressed or implied, of the FreeBSD Project.
|
|
*/
|
|
|
|
using System.Collections.Generic;
|
|
|
|
namespace MatterHackers.MatterControl.SlicerConfiguration
|
|
{
|
|
public static class SliceSettingsLayouts
|
|
{
|
|
public static (string categoryName, (string groupName, string[] settings)[] groups)[] SliceSettings()
|
|
{
|
|
var settings = new[]
|
|
{
|
|
("General", new[]
|
|
{
|
|
("General", new[]
|
|
{
|
|
SettingsKey.layer_height,
|
|
SettingsKey.first_layer_height,
|
|
SettingsKey.perimeters,
|
|
SettingsKey.top_solid_layers,
|
|
SettingsKey.bottom_solid_layers,
|
|
SettingsKey.fill_density,
|
|
SettingsKey.infill_type,
|
|
// add settings specific to SLA
|
|
SettingsKey.sla_layer_height,
|
|
SettingsKey.sla_decend_speed,
|
|
}),
|
|
("Normal Layers", new[] // this is for SLA resin printing
|
|
{
|
|
SettingsKey.sla_exposure_time,
|
|
SettingsKey.sla_lift_distance,
|
|
SettingsKey.sla_lift_speed,
|
|
SettingsKey.sla_min_off_time,
|
|
}),
|
|
("Base Layers", new[] // this is for SLA resin printing
|
|
{
|
|
SettingsKey.sla_base_layers,
|
|
SettingsKey.sla_base_exposure_time,
|
|
SettingsKey.sla_base_lift_distance,
|
|
SettingsKey.sla_base_lift_speed,
|
|
SettingsKey.sla_base_min_off_time,
|
|
}),
|
|
("Layers / Surface", new[]
|
|
{
|
|
SettingsKey.avoid_crossing_perimeters,
|
|
SettingsKey.avoid_crossing_max_ratio,
|
|
SettingsKey.external_perimeters_first,
|
|
SettingsKey.perimeter_start_end_overlap,
|
|
SettingsKey.merge_overlapping_lines,
|
|
SettingsKey.expand_thin_walls,
|
|
SettingsKey.coast_at_end_distance
|
|
}),
|
|
("Infill", new[]
|
|
{
|
|
SettingsKey.fill_angle,
|
|
SettingsKey.infill_overlap_perimeter,
|
|
SettingsKey.fill_thin_gaps,
|
|
}),
|
|
("Extruder Change", new[]
|
|
{
|
|
SettingsKey.wipe_shield_distance,
|
|
SettingsKey.wipe_tower_size,
|
|
SettingsKey.wipe_tower_perimeters_per_extruder,
|
|
}),
|
|
("Advanced", new[]
|
|
{
|
|
SettingsKey.spiral_vase,
|
|
SettingsKey.layer_to_pause,
|
|
}),
|
|
}),
|
|
("Speed", new[]
|
|
{
|
|
("Laser Speed", new[]
|
|
{
|
|
SettingsKey.laser_speed_025,
|
|
SettingsKey.laser_speed_100,
|
|
}),
|
|
("Infill Speeds", new[]
|
|
{
|
|
SettingsKey.first_layer_speed,
|
|
SettingsKey.infill_speed,
|
|
SettingsKey.top_solid_infill_speed,
|
|
SettingsKey.raft_print_speed,
|
|
}),
|
|
("Perimeter Speeds", new[]
|
|
{
|
|
SettingsKey.perimeter_speed,
|
|
SettingsKey.external_perimeter_speed,
|
|
SettingsKey.perimeter_acceleration,
|
|
SettingsKey.default_acceleration,
|
|
}),
|
|
("Other Speeds", new[]
|
|
{
|
|
SettingsKey.support_material_speed,
|
|
SettingsKey.interface_layer_speed,
|
|
SettingsKey.air_gap_speed,
|
|
SettingsKey.bridge_speed,
|
|
SettingsKey.travel_speed,
|
|
SettingsKey.number_of_first_layers,
|
|
SettingsKey.bridge_over_infill,
|
|
SettingsKey.t1_extrusion_move_speed_multiplier,
|
|
}),
|
|
("Cooling", new[]
|
|
{
|
|
SettingsKey.slowdown_below_layer_time,
|
|
SettingsKey.min_print_speed,
|
|
}),
|
|
}),
|
|
("Adhesion", new[]
|
|
{
|
|
("Skirt", new[]
|
|
{
|
|
SettingsKey.create_skirt,
|
|
SettingsKey.skirts,
|
|
SettingsKey.skirt_distance,
|
|
SettingsKey.min_skirt_length,
|
|
}),
|
|
("Raft", new[]
|
|
{
|
|
SettingsKey.create_raft,
|
|
SettingsKey.raft_extra_distance_around_part,
|
|
SettingsKey.raft_air_gap,
|
|
SettingsKey.raft_extruder,
|
|
// add settings specific to SLA
|
|
SettingsKey.sla_create_raft,
|
|
}),
|
|
("Brim", new[]
|
|
{
|
|
SettingsKey.create_brim,
|
|
SettingsKey.brims,
|
|
SettingsKey.brim_extruder,
|
|
}),
|
|
}),
|
|
("Support", new[]
|
|
{
|
|
("General", new[]
|
|
{
|
|
SettingsKey.support_material_create_perimeter,
|
|
SettingsKey.support_material_interface_layers,
|
|
SettingsKey.support_material_xy_distance,
|
|
SettingsKey.support_air_gap,
|
|
SettingsKey.support_type,
|
|
SettingsKey.support_material_spacing,
|
|
SettingsKey.support_material_infill_angle,
|
|
SettingsKey.support_material_extruder,
|
|
SettingsKey.support_material_interface_extruder,
|
|
}),
|
|
("Automatic", new[]
|
|
{
|
|
SettingsKey.create_per_layer_support,
|
|
SettingsKey.create_per_layer_internal_support,
|
|
SettingsKey.support_percent,
|
|
SettingsKey.support_grab_distance,
|
|
// add settings specific to SLA
|
|
SettingsKey.sla_auto_support,
|
|
}),
|
|
}),
|
|
("Resin", new[]
|
|
{
|
|
("Properties", new []
|
|
{
|
|
SettingsKey.resin_density,
|
|
SettingsKey.resin_cost,
|
|
}),
|
|
}),
|
|
("Filament", new[]
|
|
{
|
|
("Properties", new[]
|
|
{
|
|
SettingsKey.material_color,
|
|
SettingsKey.material_color_1,
|
|
SettingsKey.material_color_2,
|
|
SettingsKey.material_color_3,
|
|
SettingsKey.filament_diameter,
|
|
SettingsKey.filament_density,
|
|
SettingsKey.filament_cost,
|
|
SettingsKey.temperature,
|
|
SettingsKey.temperature1,
|
|
SettingsKey.temperature2,
|
|
SettingsKey.temperature3,
|
|
SettingsKey.bed_temperature,
|
|
SettingsKey.inactive_cool_down,
|
|
SettingsKey.seconds_to_reheat,
|
|
}),
|
|
("Fan", new[]
|
|
{
|
|
SettingsKey.enable_fan,
|
|
SettingsKey.min_fan_speed_layer_time,
|
|
SettingsKey.max_fan_speed_layer_time,
|
|
SettingsKey.min_fan_speed,
|
|
SettingsKey.max_fan_speed,
|
|
SettingsKey.bridge_fan_speed,
|
|
SettingsKey.disable_fan_first_layers,
|
|
SettingsKey.min_fan_speed_absolute,
|
|
}),
|
|
("Retraction", new[]
|
|
{
|
|
SettingsKey.enable_retractions,
|
|
SettingsKey.retract_length,
|
|
SettingsKey.retract_restart_extra,
|
|
SettingsKey.retract_restart_extra_time_to_apply,
|
|
SettingsKey.retract_speed,
|
|
SettingsKey.retract_lift,
|
|
SettingsKey.retract_when_changing_islands,
|
|
SettingsKey.min_extrusion_before_retract,
|
|
SettingsKey.retract_before_travel,
|
|
SettingsKey.retract_before_travel_avoid,
|
|
SettingsKey.retract_length_tool_change,
|
|
SettingsKey.retract_restart_extra_toolchange,
|
|
}),
|
|
("Advanced", new[]
|
|
{
|
|
SettingsKey.extruder_wipe_temperature,
|
|
SettingsKey.bed_remove_part_temperature,
|
|
SettingsKey.extrusion_multiplier,
|
|
SettingsKey.first_layer_extrusion_width,
|
|
SettingsKey.external_perimeter_extrusion_width,
|
|
}),
|
|
}),
|
|
};
|
|
|
|
return settings;
|
|
}
|
|
|
|
public static (string categoryName, (string groupName, string[] settings)[] groups)[] PrinterSettings()
|
|
{
|
|
var printerSettings = new (string categoryName, (string groupName, string[] settings)[] groups)[]
|
|
{
|
|
("General", new[]
|
|
{
|
|
("General", new[]
|
|
{
|
|
SettingsKey.make,
|
|
SettingsKey.model,
|
|
SettingsKey.auto_connect,
|
|
SettingsKey.baud_rate,
|
|
SettingsKey.com_port,
|
|
SettingsKey.selector_ip_address,
|
|
SettingsKey.ip_address,
|
|
SettingsKey.ip_port,
|
|
}),
|
|
("Bed", new[]
|
|
{
|
|
SettingsKey.bed_size,
|
|
SettingsKey.print_center,
|
|
SettingsKey.build_height,
|
|
SettingsKey.bed_shape,
|
|
// add settings specific to SLA
|
|
SettingsKey.sla_resolution,
|
|
SettingsKey.sla_printable_area_inset,
|
|
SettingsKey.sla_mirror_mode,
|
|
}),
|
|
("Extruders", new[]
|
|
{
|
|
SettingsKey.extruder_count,
|
|
SettingsKey.nozzle_diameter,
|
|
SettingsKey.t0_inset,
|
|
SettingsKey.t1_inset,
|
|
SettingsKey.extruders_share_temperature,
|
|
SettingsKey.extruder_offset,
|
|
}),
|
|
}),
|
|
("Features", new (string groupName, string[] settings)[]
|
|
{
|
|
("Leveling", new[]
|
|
{
|
|
SettingsKey.print_leveling_solution,
|
|
SettingsKey.print_leveling_insets,
|
|
SettingsKey.leveling_sample_points,
|
|
SettingsKey.print_leveling_required_to_print,
|
|
}),
|
|
("Print Recovery", new[]
|
|
{
|
|
SettingsKey.recover_is_enabled,
|
|
SettingsKey.recover_first_layer_speed,
|
|
SettingsKey.recover_position_before_z_home,
|
|
}),
|
|
("Probe", new[]
|
|
{
|
|
SettingsKey.print_leveling_probe_start,
|
|
SettingsKey.use_z_probe,
|
|
SettingsKey.validate_leveling,
|
|
SettingsKey.validation_threshold,
|
|
SettingsKey.z_probe_samples,
|
|
SettingsKey.probe_offset,
|
|
SettingsKey.z_servo_depolyed_angle,
|
|
SettingsKey.z_servo_retracted_angle,
|
|
SettingsKey.measure_probe_offset_conductively,
|
|
SettingsKey.conductive_pad_center,
|
|
SettingsKey.conductive_probe_min_z,
|
|
}),
|
|
("Behavior", new[]
|
|
{
|
|
SettingsKey.slice_engine,
|
|
SettingsKey.heat_extruder_before_homing,
|
|
SettingsKey.auto_release_motors,
|
|
SettingsKey.validate_layer_height,
|
|
SettingsKey.emulate_endstops,
|
|
SettingsKey.send_with_checksum,
|
|
SettingsKey.reset_long_extrusion,
|
|
SettingsKey.output_only_first_layer,
|
|
SettingsKey.g0,
|
|
SettingsKey.progress_reporting,
|
|
SettingsKey.include_firmware_updater,
|
|
SettingsKey.backup_firmware_before_update,
|
|
}),
|
|
("Diagnostics", new[]
|
|
{
|
|
SettingsKey.report_runout_sensor_data,
|
|
}),
|
|
("Hardware", new[]
|
|
{
|
|
SettingsKey.firmware_type,
|
|
SettingsKey.show_reset_connection,
|
|
SettingsKey.z_homes_to_max,
|
|
SettingsKey.has_fan,
|
|
SettingsKey.has_fan_per_extruder,
|
|
SettingsKey.has_hardware_leveling,
|
|
SettingsKey.has_heated_bed,
|
|
SettingsKey.has_sd_card_reader,
|
|
SettingsKey.has_power_control,
|
|
SettingsKey.filament_runout_sensor,
|
|
SettingsKey.runout_sensor_check_distance,
|
|
SettingsKey.runout_sensor_trigger_ratio,
|
|
SettingsKey.has_z_probe,
|
|
SettingsKey.has_z_servo,
|
|
SettingsKey.has_conductive_nozzle,
|
|
SettingsKey.has_c_axis,
|
|
SettingsKey.enable_network_printing,
|
|
SettingsKey.enable_sailfish_communication,
|
|
SettingsKey.max_acceleration,
|
|
SettingsKey.max_velocity,
|
|
SettingsKey.jerk_velocity,
|
|
SettingsKey.print_time_estimate_multiplier,
|
|
SettingsKey.load_filament_length,
|
|
SettingsKey.unload_filament_length,
|
|
SettingsKey.load_filament_speed,
|
|
}),
|
|
("Printer Help", new[]
|
|
{
|
|
SettingsKey.trim_filament_markdown,
|
|
SettingsKey.insert_filament_markdown2,
|
|
SettingsKey.running_clean_markdown2,
|
|
SettingsKey.insert_filament_1_markdown,
|
|
SettingsKey.running_clean_1_markdown,
|
|
SettingsKey.created_date,
|
|
}),
|
|
}),
|
|
("G-Code", new[]
|
|
{
|
|
("Printer Control", new[]
|
|
{
|
|
SettingsKey.start_gcode,
|
|
SettingsKey.end_gcode,
|
|
SettingsKey.layer_gcode,
|
|
SettingsKey.connect_gcode,
|
|
SettingsKey.clear_bed_gcode,
|
|
}),
|
|
("User Control", new[]
|
|
{
|
|
SettingsKey.cancel_gcode,
|
|
SettingsKey.pause_gcode,
|
|
SettingsKey.resume_gcode,
|
|
}),
|
|
("Multi-Extruder", new[]
|
|
{
|
|
SettingsKey.before_toolchange_gcode,
|
|
SettingsKey.toolchange_gcode,
|
|
SettingsKey.before_toolchange_gcode_1,
|
|
SettingsKey.toolchange_gcode_1,
|
|
SettingsKey.before_toolchange_gcode_2,
|
|
SettingsKey.toolchange_gcode_2,
|
|
SettingsKey.before_toolchange_gcode_3,
|
|
SettingsKey.toolchange_gcode_3,
|
|
}),
|
|
("Filters", new[]
|
|
{
|
|
SettingsKey.write_regex,
|
|
SettingsKey.read_regex,
|
|
}),
|
|
}),
|
|
};
|
|
|
|
return printerSettings;
|
|
}
|
|
}
|
|
} |