e49397b0b5
Took out the filament selection in leveling Made our load and unload scripts work correctly with repetier firmware issue: MatterHackers/MCCentral#4315 Need Loading overlay when adding or switching to a printer
26 lines
1.4 KiB
Text
26 lines
1.4 KiB
Text
; host.choose_material(title:"Confirm the material you are unloading.")
|
|
|
|
; host.show_message(title:"Waiting for extruder to heat to [temperature], before unloading.")
|
|
M106 S0 ; turn off the fan
|
|
G4 S1 ; wait message to display
|
|
M109 S[temperature] ; heat up the extruder
|
|
|
|
M302 S1 ; Allow extrusion at any temperature. S0 only works on Marlin S1 works on repetier and marlin
|
|
; host.show_message(title:"Unloading filament..." count_down:"[unload_filament_time]")
|
|
G92 E0 ; reset the extruder position to 0
|
|
G91 ; Relative positioning
|
|
G1 E15 F600 ; push some out first
|
|
G1 E-[unload_filament_length_over_six] F[load_filament_speed] ; unload the filament
|
|
G1 E-[unload_filament_length_over_six] F[load_filament_speed] ; unload the filament
|
|
G1 E-[unload_filament_length_over_six] F[load_filament_speed] ; unload the filament
|
|
G1 E-[unload_filament_length_over_six] F[load_filament_speed] ; unload the filament
|
|
G1 E-[unload_filament_length_over_six] F[load_filament_speed] ; unload the filament
|
|
G1 E-[unload_filament_length_over_six] F[load_filament_speed] ; unload the filament
|
|
G4 S1 ; wait for move to finish
|
|
G90 ; Absolute positioning
|
|
G92 E0 ; reset the extruder position to 0
|
|
|
|
M302 S150 ; Set cold extrude temp back to reasonable
|
|
|
|
; turn the extruder temperature off if not printing, else leave it at new load temp.
|
|
; host.done_load_unload()
|