nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
mattercontrol/original/StaticData/Profiles/Pulse/E-422M.printer

288 lines
No EOL
15 KiB
Text
Raw Permalink Blame History

{
"DocumentVersion": 201606271,
"ID": "E-444M-5212414314020864",
"Macros": [
{
"Name": "Deploy Probe",
"GCode": "M280 P0 S10",
"LastModified": "0001-01-01T00:00:00"
},
{
"Name": "Retract Probe",
"GCode": "M280 P0 S90",
"LastModified": "0001-01-01T00:00:00"
},
{
"Name": "Release Probe Alarm",
"GCode": "M280 P0 S160",
"LastModified": "0001-01-01T00:00:00"
},
{
"Name": "Test Probe",
"GCode": "M280 P0 S60",
"LastModified": "0001-01-01T00:00:00"
}
],
"MaterialLayers": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_shape": "rectangular",
"bed_size": "250,220",
"bed_temperature": "55",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "15",
"brim_width": "0",
"build_height": "215",
"cancel_gcode": "G28 Z0\\nG28 Y0\\nG0 X5 Y215 F[travel_speed]\\nM106 S0\\n\\n\\nM300 S2400 P30 ; Cancel Tone\\nM300 S2000 P30 ; Cancel Tone\\nM300 S2400 P30 ; Cancel Tone\\nM300 S2000 P30 ; Cancel Tone\\nM300 S2400 P30 ; Cancel Tone\\nM300 S2000 P30 ; Cancel Tone\\nM300 S2400 P30 ; Cancel Tone\\nM300 S2000 P30 ; Cancel Tone\\nM300 S1600 P30 ; Cancel Tone\\nM300 S2000 P30 ; Cancel Tone\\nM300 S1600 P30 ; Cancel Tone\\nM300 S2000 P30 ; Cancel Tone\\nM300 S1600 P30 ; Cancel Tone\\nM300 S2000 P30 ; Cancel Tone\\nM300 S1600 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S1600 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S1600 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S1600 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\nM300 S1200 P30 ; Cancel Tone\\nM300 S800 P30 ; Cancel Tone\\n\\n",
"center_part_on_bed": "1",
"complete_objects": "0",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "1300",
"disable_fan_first_layers": "1",
"end_gcode": "G91\\nG1 E-[retract_length] F[retract_speed]\\nG90\\nG0 X5 Y215 F[travel_speed]\\nG28 Z0 ; Retract and move away, then home Z axis\\n\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heat bed\\nM106 S0 ; turn off layer fan\\nM84 ; disable motors\\n\\nM300 S1760 P20 ; End Tone\\nM300 S880 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S880 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S880 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S880 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2794 P20 ; End Tone\\nM300 S1397 P20 ; End Tone\\nM300 S2794 P20 ; End Tone\\nM300 S1397 P20 ; End Tone\\nM300 S2794 P20 ; End Tone\\nM300 S1397 P20 ; End Tone\\nM300 S2794 P20 ; End Tone\\nM300 S1397 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2637 P20 ; End Tone\\nM300 S1318 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S2217 P20 ; End Tone\\nM300 S1108 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone\\nM300 S3520 P20 ; End Tone\\nM300 S1760 P20 ; End Tone",
"external_perimeter_speed": "25",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.73",
"fill_angle": "90",
"fill_density": "30%",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.25",
"first_layer_speed": "18",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_heated_bed": "1",
"has_sd_card_reader": "1",
"include_firmware_updater": "None",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": "20%",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.2",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0",
"min_fan_speed": "100",
"min_print_speed": "15",
"min_skirt_length": "5",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "M76 ; pause print timer\\nG91\\nG1 Z10 E-5.0 F1800\\nG90\\nG1 X5 F[travel_speed]\\n\\nM300 S3000 P30 ; Pause Tone\\nM300 S1500 P30 ; Pause Tone\\nM300 S3000 P30 ; Pause Tone\\nM300 S1500 P30 ; Pause Tone\\nM300 S3000 P30 ; Pause Tone\\nM300 S1500 P30 ; Pause Tone\\nM300 S3000 P30 ; Pause Tone\\nM300 S1500 P30 ; Pause Tone\\nM300 S750 P30 ; Pause Tone\\nM300 S1500 P30 ; Pause Tone\\nM300 S750 P30 ; Pause Tone\\nM300 S1500 P30 ; Pause Tone\\nM300 S750 P30 ; Pause Tone\\nM300 S1500 P30 ; Pause Tone\\nM300 S750 P30 ; Pause Tone",
"perimeter_acceleration": "800",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "60",
"perimeters": "3",
"post_process": "",
"print_center": "125,110",
"raft_air_gap": "0.25",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "40",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "M75 ; Start the print job timer\\nG91\\nG1 Z-10 F1800\\nG90\\n\\nM300 S750 P30 ; Resume Tone\\nM300 S1500 P30 ; Resume Tone\\nM300 S750 P30 ; Resume Tone\\nM300 S1500 P30 ; Resume Tone\\nM300 S750 P30 ; Resume Tone\\nM300 S1500 P30 ; Resume Tone\\nM300 S750 P30 ; Resume Tone\\nM300 S1500 P30 ; Resume Tone\\nM300 S3000 P30 ; Resume Tone\\nM300 S1500 P30 ; Resume Tone\\nM300 S3000 P30 ; Resume Tone\\nM300 S1500 P30 ; Resume Tone\\nM300 S3000 P30 ; Resume Tone\\nM300 S1500 P30 ; Resume Tone\\nM300 S3000 P30 ; Resume Tone",
"retract_before_travel": "3",
"retract_layer_change": "1",
"retract_length": "3",
"retract_length_tool_change": "10",
"retract_lift": ".6",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "40",
"skirt_distance": "3",
"skirt_height": "1",
"skirts": "2",
"slowdown_below_layer_time": "20",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature]\\n\\nG1 Y5 X5 [travel_speed] ; Purge line\\nG1 Z0.8 F1800\\nG92 E0 ; Purge line\\nG1 X100 Z0.3 E25 F900 ; Purge line\\nG92 E0 ; Purge line\\nG1 E-2 F2400 ; Purge line ",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_create_perimeter": "1",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "1mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "3",
"support_material_speed": "40",
"support_material_threshold": "0",
"support_material_xy_distance": "2",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "1",
"support_type": "LINES",
"temperature": "210",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "30",
"top_solid_layers": "1mm",
"travel_speed": "200",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "1",
"z_offset": "0",
"make": "Pulse",
"model": "E-422M",
"created_date": "2022-03-30T23:51:32.149Z",
"baud_rate": "250000",
"default_material_presets": "PLA",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Box.stl",
"active_theme_name": "Blue - Light",
"show_reset_connection": "0",
"z_homes_to_max": "1",
"filament_cost": "0",
"bottom_solid_layers": "1mm",
"print_leveling_required_to_print": "1",
"manual_probe_paper_width": "0.1",
"recover_is_enabled": "1",
"z_offset_after_home": "2",
"printer_z_after_home": "178",
"manual_movement_speeds": "x,5400,y,5400,z,1200,e0,210",
"baby_step_z_offset": "0",
"print_leveling_solution": "5x5 Mesh",
"expand_thin_walls": "1",
"merge_overlapping_lines": "1",
"active_quality_key": "",
"auto_connect": "1",
"has_z_probe": "1",
"use_z_probe": "1",
"has_z_servo": "1",
"z_servo_depolyed_angle": "10",
"z_servo_retracted_angle": "90",
"z_probe_samples": "1",
"feedrate_ratio": "1",
"print_leveling_probe_start": "10",
"retract_restart_extra_time_to_apply": "0",
"write_regex": "\"^(G28)\",\"G28,M280 P0 S160,G4 P400,M280 P0 S90\"\\n\"^(M106)\", \"M106 P1\"",
"slicing_engine": "MatterSlice",
"filament_runout_sensor": "0",
"support_air_gap": "0.4",
"probe_has_been_calibrated": "0",
"load_filament_length": "598",
"load_filament_speed": "35",
"unload_filament_length": "700",
"driver_type": "RepRap",
"enable_network_printing": "0",
"enable_retractions": "1",
"retract_when_changing_islands": "1",
"create_skirt": "1",
"enable_fan": "1",
"perimeter_start_end_overlap": "35",
"max_velocity": "200",
"max_acceleration": "3000",
"min_fan_speed_layer_time": "15",
"max_fan_speed_layer_time": "10",
"jerk_velocity": "10",
"layer_to_pause": "",
"filament_has_been_loaded": "0",
"xy_offsets_have_been_calibrated": "0",
"filament_1_has_been_loaded": "0",
"probe_offset": "23,0,-0.42",
"coast_at_end_distance": "0",
"air_gap_speed": "40",
"interface_layer_speed": "40",
"connect_gcode": "M300 S800 P20 ; Connect Tone\\nM300 S900 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1000 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1100 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1200 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1300 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1400 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1500 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone\\nM300 S800 P20 ; Connect Tone\\nM300 S1600 P30 ; Connect Tone",
"progress_reporting": "M117",
"firmware_type": "Marlin",
"active_material_key": "",
"baby_step_z_offset_t1": "0",
"baby_step_z_offset_t2": "0",
"baby_step_z_offset_t3": "0",
"print_leveling_data": "",
"print_leveling_enabled": "0",
"validate_leveling": "1",
"first_layer_extrusion_width": "110%",
"seam_placement": "Centered In Back",
"monotonic_solid_infill": "1",
"avoid_crossing_max_ratio": "3",
"bridge_over_infill": "1",
"retract_before_travel_avoid": "20",
"has_swappable_bed": "1",
"bed_temperature_buildtak": "55",
"bed_temperature_garolite": "75",
"bed_temperature_glass": "75",
"bed_temperature_kapton": "55",
"bed_temperature_pei": "75",
"bed_temperature_pp": "55"
},
"QualityLayers": [
{
"layer_name": "Coarse",
"layer_id": "1f6a2613-1fce-4394-94f7-14ffa0e8cf80",
"layer_height": "0.3",
"infill_type": "GYROID",
"fill_density": "8%",
"top_solid_layers": "1.5mm",
"bottom_solid_layers": "1.2mm",
"perimeters": "2",
"first_layer_height": "0.3"
},
{
"layer_name": "Fine",
"layer_id": "bf09375b-708b-4471-8377-23b594649376",
"layer_height": "0.1",
"fill_density": "20%"
},
{
"layer_name": "Standard",
"layer_id": "aba06ee9-14b3-4ad5-93c1-476d8db89dee",
"layer_height": "0.2",
"fill_density": "20%"
}
],
"StagedUserSettings": {}
}
Reference in a new issue View git blame Copy permalink