nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
mattercontrol/original/StaticData/Profiles/PrintSpace/Altair_40.printer

469 lines
No EOL
14 KiB
Text
Raw Permalink Blame History

{
"DocumentVersion": 201606271,
"ID": null,
"StagedUserSettings": {},
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "circular",
"bed_size": "205,205",
"bed_temperature": "60",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "30",
"brim_width": "0",
"build_height": "255",
"cancel_gcode": "G28\\n",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "3",
"end_gcode": "G91 ; set relative coordinate system \\nG1 E-2 F12000 ; retract filament\\nG90 ; set absolute coordinate system\\nM104 S0 ; turn off hotend temperature\\nM140 S0 ; turn off bed temperature\\nG28 ; home all axes\\nM84 ; disable motors",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "60",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "1",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0.6",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.76",
"fill_angle": "45",
"fill_density": "25%",
"fill_pattern": "rectilinear",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "90",
"first_layer_extrusion_width": "125%",
"first_layer_height": "175%",
"first_layer_speed": "35%",
"first_layer_temperature": "230",
"g0": "0",
"gap_fill_speed": "30",
"gcode_arcs": "1",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "1",
"has_power_control": "0",
"has_sd_card_reader": "1",
"heat_extruder_before_homing": "0",
"include_firmware_updater": "None",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0.6",
"infill_first": "",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "40",
"infill_type": "TRIANGLES",
"layer_height": "0.2",
"layer_to_pause": "",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.3",
"min_fan_speed": "100",
"min_print_speed": "15",
"min_skirt_length": "4",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0.6",
"perimeter_speed": "60",
"perimeters": "5",
"post_process": "",
"print_center": "0,0",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "7 Point Disk",
"raft_air_gap": ".2",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "45",
"randomize_start": "",
"repair_outlines_extensive_stitching": "1",
"repair_outlines_keep_open": "1",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "30",
"retract_layer_change": "0",
"retract_length": "3",
"retract_length_tool_change": "6",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "100",
"retract_when_changing_islands": "1",
"show_reset_connection": "1",
"skirt_distance": "3",
"skirt_height": "1",
"skirts": "2",
"slowdown_below_layer_time": "15",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "20",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0.6",
"solid_infill_speed": "30",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; home all axes\\nG0 Z10\\nG30 Z-0.2 F1000 ; set bed height\\nG0 Z5 ; lift nozzle before print",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_air_gap": ".3",
"support_material": "0",
"support_material_angle": "0",
"support_material_create_internal_support": "1",
"support_material_create_perimeter": "1",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "2",
"support_material_interface_spacing": "0",
"support_material_pattern": "rectilinear",
"support_material_percent": "50",
"support_material_spacing": "4",
"support_material_speed": "15",
"support_material_threshold": "15",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "1",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "4",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0.6",
"top_solid_infill_speed": "40",
"top_solid_layers": "1mm",
"travel_speed": "100",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "1",
"z_offset": "0",
"make": "PrintSpace",
"model": "Altair_40",
"created_date": "2016-12-21T21:01:59.924Z",
"baud_rate": "250000",
"default_material_presets": "PLA",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"MaterialLayers": [
{
"layer_name": "618 Nylon (on Hot Glass or Blue Tape with PVA coating)",
"layer_id": "0fac64ed-fbd6-4740-b480-9ae6b5c3634e",
"bed_temperature": "60",
"external_perimeter_speed": "40",
"infill_speed": "40",
"max_fan_speed": "0",
"min_fan_speed": "0",
"perimeter_speed": "40",
"raft_fan_speed_percent": "0",
"temperature": "242",
"z_offset": "-0.05"
},
{
"layer_name": "ABS",
"filament_density": "1.04",
"layer_id": "0bc64fd2-8c00-43a9-94da-762f6bac50ab",
"bed_temperature": "100",
"bridge_fan_speed": "0",
"disable_fan_first_layers": "0",
"external_perimeter_speed": "45",
"max_fan_speed": "0",
"min_fan_speed": "0",
"perimeter_speed": "40",
"temperature": "235"
},
{
"layer_name": "Alloy 910 (on BuildTak)",
"layer_id": "472ad434-ac17-48ea-bb50-5f3b27e1f679",
"bed_temperature": "0",
"external_perimeter_speed": "40",
"infill_speed": "40",
"perimeter_speed": "40",
"temperature": "245",
"z_offset": "0.05"
},
{
"layer_name": "BluePrint (on Clean BuildTak)",
"layer_id": "ac1bceed-8099-4ff6-b056-0576ac1b5925",
"bed_temperature": "0",
"external_perimeter_speed": "70",
"filament_diameter": "1.59",
"fill_density": "0.35",
"first_layer_speed": "20",
"infill_speed": "70",
"max_fan_speed": "0",
"min_fan_speed": "0",
"perimeter_speed": "70",
"skirts": "3",
"temperature": "260",
"z_offset": "0"
},
{
"layer_name": "BluePrint (on Glass)",
"layer_id": "d3af885c-1cb5-44b6-a4c3-44060464e07b",
"bed_temperature": "95",
"external_perimeter_speed": "70",
"filament_diameter": "1.59",
"fill_density": "0.35",
"first_layer_speed": "20",
"infill_speed": "70",
"max_fan_speed": "0",
"min_fan_speed": "0",
"perimeter_speed": "70",
"skirts": "3",
"temperature": "260",
"z_offset": "0"
},
{
"layer_name": "Bridge Nylon (on Hot Glass or Blue Tape with PVA coating)",
"layer_id": "d5aee846-5724-4238-b3a7-d93e155fcb30",
"bed_temperature": "50",
"external_perimeter_speed": "40",
"infill_speed": "40",
"max_fan_speed": "0",
"min_fan_speed": "0",
"perimeter_speed": "40",
"raft_fan_speed_percent": "0",
"temperature": "265",
"z_offset": "-0.05"
},
{
"layer_name": "Ninja Flex",
"layer_id": "f80f64d9-857d-4508-831b-eb367c8bd82e",
"bridge_fan_speed": "100",
"external_perimeter_speed": "15",
"filament_diameter": "1.75",
"first_layer_speed": "5",
"infill_speed": "20",
"max_fan_speed": "100",
"min_fan_speed": "100",
"perimeter_speed": "20",
"retract_length": "0",
"support_material_speed": "25",
"temperature": "235",
"z_offset": "0.2"
},
{
"layer_name": "PETG Taulman (on Paper Tape)",
"layer_id": "49a1ce62-e07b-43dc-bb11-76928afa8d34",
"bed_temperature": "70",
"bridge_fan_speed": "100",
"disable_fan_first_layers": "2",
"filament_diameter": "1.73",
"max_fan_speed": "100",
"min_fan_speed": "100",
"retract_length": "3",
"temperature": "240",
"z_offset": "0"
},
{
"layer_name": "PLA (on Blue Tape)",
"layer_id": "22d269f8-ee0e-4482-b464-bec0a38605c4",
"bed_temperature": "0",
"bridge_fan_speed": "50",
"disable_fan_first_layers": "2",
"external_perimeter_speed": "50",
"filament_diameter": "1.7",
"max_fan_speed": "0",
"min_fan_speed": "100",
"temperature": "225"
},
{
"layer_name": "PLA_Carbon Fiber",
"layer_id": "fea0893b-bee9-4183-8777-4fe14badc9d7",
"bridge_fan_speed": "100",
"disable_fan_first_layers": "2",
"external_perimeter_speed": "35",
"filament_diameter": "1.7",
"infill_speed": "30",
"max_fan_speed": "100",
"min_fan_speed": "100",
"perimeter_speed": "30",
"retract_length": "3",
"temperature": "237",
"z_offset": "0.05"
},
{
"layer_name": "Poly-Flex PLA",
"layer_id": "92e07612-63ab-42b8-89a7-da9981d22408",
"bridge_fan_speed": "100",
"external_perimeter_speed": "15",
"filament_diameter": "1.75",
"infill_speed": "20",
"max_fan_speed": "100",
"min_fan_speed": "100",
"perimeter_speed": "20",
"retract_length": "0",
"support_material_speed": "25",
"temperature": "235",
"z_offset": "0.12"
},
{
"layer_name": "Polycarbonate PC (on BuildTak)",
"layer_id": "f7107591-fade-4c9d-aef7-b32cf11c0b70",
"bed_temperature": "80",
"bridge_fan_speed": "0",
"disable_fan_first_layers": "0",
"filament_diameter": "1.74",
"max_fan_speed": "0",
"min_fan_speed": "0",
"perimeter_speed": "40",
"retract_length": "3",
"temperature": "260",
"z_offset": "0"
},
{
"layer_name": "PolyMax PLA (on Blue Tape)",
"layer_id": "d3147fd6-8591-4ab6-904d-cd26db4349f0",
"bed_temperature": "0",
"bridge_fan_speed": "100",
"disable_fan_first_layers": "2",
"filament_diameter": "1.72",
"max_fan_speed": "0",
"min_fan_speed": "100",
"temperature": "200"
},
{
"layer_name": "PolyMax PLA (on BuildTak)",
"layer_id": "9ceac132-1e96-4072-b6fb-470f5cf01c8d",
"bed_temperature": "60",
"bridge_fan_speed": "50",
"disable_fan_first_layers": "2",
"filament_diameter": "1.72",
"max_fan_speed": "0",
"min_fan_speed": "100",
"temperature": "200"
},
{
"layer_name": "PolyMax PLA (on Glass)",
"layer_id": "d96c18db-1505-40b6-8818-8c391596f331",
"bed_temperature": "60",
"bridge_fan_speed": "50",
"disable_fan_first_layers": "2",
"filament_diameter": "1.72",
"max_fan_speed": "0",
"min_fan_speed": "100",
"temperature": "200"
},
{
"layer_name": "PolyPlus PLA (on Blue Tape)",
"layer_id": "fdf6d3ba-1620-412a-892f-2f7b46d3d9ff",
"bed_temperature": "60",
"bridge_fan_speed": "100",
"disable_fan_first_layers": "2",
"filament_diameter": "1.74",
"max_fan_speed": "100",
"min_fan_speed": "100",
"retract_length": "3",
"temperature": "200",
"z_offset": "0"
},
{
"layer_name": "PolyPlus PLA (on BuildTak)",
"layer_id": "f10f53c8-0c94-4df1-9197-9bcd25405938",
"bed_temperature": "60",
"bridge_fan_speed": "100",
"disable_fan_first_layers": "2",
"filament_diameter": "1.7",
"max_fan_speed": "100",
"min_fan_speed": "100",
"retract_length": "3",
"temperature": "200",
"z_offset": "0"
},
{
"layer_name": "PolyPlus PLA (on Glass)",
"layer_id": "580efee8-c3b7-4a7d-9b73-3d0d2f6d50ed",
"bed_temperature": "60",
"bridge_fan_speed": "100",
"disable_fan_first_layers": "2",
"filament_diameter": "1.7",
"max_fan_speed": "100",
"min_fan_speed": "100",
"retract_length": "3",
"temperature": "200",
"z_offset": "0"
},
{
"layer_name": "PVA",
"layer_id": "45dece11-0b04-46a8-9cd9-68f20a547e38",
"bed_temperature": "0",
"bridge_fan_speed": "100",
"disable_fan_first_layers": "2",
"external_perimeter_speed": "50",
"filament_diameter": "1.74",
"max_fan_speed": "100",
"min_fan_speed": "100",
"perimeter_speed": "50",
"retract_length": "3",
"temperature": "190",
"z_offset": "0"
},
{
"layer_name": "t-glase PETT",
"layer_id": "03b8ba94-2477-4c8c-8d01-79f37d0a948b",
"bed_temperature": "45",
"external_perimeter_speed": "40",
"filament_diameter": "1.59",
"infill_speed": "40",
"perimeter_speed": "40",
"temperature": "240",
"z_offset": "0.05"
}
],
"QualityLayers": [
{
"layer_name": "Coarse",
"layer_id": "88a7d208-efbe-44ae-bbb0-74ee2adeb2f4",
"layer_height": "0.3",
"first_layer_height": "125%"
},
{
"layer_name": "Fine",
"layer_id": "7061a86c-e917-471b-80c9-d5ffdecd0cba",
"layer_height": "0.1"
},
{
"layer_name": "Standard",
"layer_id": "662b2b32-355f-4301-9584-f5dc1ee75786",
"layer_height": "0.2"
}
]
}
Reference in a new issue View git blame Copy permalink