avoid_crossing_perimeters = 1
bed_shape = rectangular
bed_size = 215,215
bed_temperature = 50
bottom_clip_amount = 0
bottom_solid_layers = 1mm
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 0
build_height = 230
cancel_gcode = 
center_part_on_bed = 1
complete_objects = 0
cool_extruder_lift = 0
cooling = 1
create_raft = 0
raft_extra_distance_around_part = 5
raft_air_gap = .2
default_acceleration = 0
disable_fan_first_layers = 1
end_gcode = M104 S0    ;extruder heater off\nM140 S0    ; bed heat off\nG91      ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle\nG1 Z+0.5 E-5 X-20 Y-20 F[travel_speed] ;move Z up a bit and retract filament \nG28 X0 Y0  ;move X/Y to min endstops, so the head is out of the way\nM84         ;steppers off\nG90     ;absolute positioning
external_perimeter_speed = 50
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
fill_angle = 45
fill_density = 0.3
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 50
first_layer_extrusion_width = 200%
first_layer_height = 0.3
first_layer_speed = 45%
first_layer_temperature = 205
g0 = 0
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
gcode_output_type = REPRAP
has_fan = 0
has_heated_bed = 1
has_sd_card_reader = 1
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap_perimeter = .06
infill_speed = 50
infill_type = TRIANGLES
layer_gcode = 
layer_height = 0.2
min_extrusion_before_retract = .1
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
min_skirt_length = 5
notes = 
nozzle_diameter = 0.35
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
pause_gcode = 
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 50
perimeters = 2
post_process = 
print_center = 133,120
raft_layers = 0
randomize_start = 0
repair_outlines_extensive_stitching = 1
repair_outlines_keep_open = 1
repair_overlaps_reverse_orientation = 0
repair_overlaps_union_all_together = 0
resolution = 0
resume_gcode = 
retract_before_travel = 20
retract_layer_change = 1
retract_length = 1
retract_length_tool_change = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G90        ;absolute positioning\nG28 X0 Y0  ;move X/Y to min endstops\nG1 F800  Y40  ;move Y 40mm to not hit clip\nM84              ;steppers off\nG28 Z0     ;move Z to min endstops\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 10mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7800\nM117      [input_filename_base]    ; what will be displayed
start_perimeters_at_concave_points = 0
start_perimeters_at_non_overhang = 0
support_material = 0
support_material_angle = 45
support_material_infill_angle = 45
support_material_create_internal_support = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_pattern = honeycomb
support_material_spacing = 2.5
support_material_speed = 50
support_material_threshold = 0
support_material_xy_distance = 0.7
support_material_z_distance = 0.15
support_material_z_gap_layers = 1
support_type = LINES
temperature = 220
thin_walls = 1
threads = 2
toolchange_gcode = 
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 1mm
travel_speed = 110
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
wipe_shield_distance = 0
z_can_be_negative = 0
z_offset = 0