build_height = 200
bed_size = 200,200
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = 
nozzle_diameter = 0.35
print_center = 100,100
retract_before_travel = 20
retract_layer_change = 1
retract_length = 1.8
retract_length_toolchange = 3
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 21
start_gcode = G28 ; home all axes
toolchange_gcode = M104 S[temperature_[next_extruder]] T[next_extruder]\nM104 S140 T[previous_extruder]\nG0 X100 Y5\nM109 S[temperature_[next_extruder]] T[next_extruder]\n;Toolchange!
use_relative_e_distances = 0
vibration_limit = 0
wipe = 1
z_offset = 0
avoid_crossing_perimeters = 1
bottom_solid_layers = 1mm
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 0
complete_objects = 0
default_acceleration = 0
external_perimeter_speed = 100
external_perimeters_first = 
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.5
fill_angle = 45
fill_density = 0.25
fill_pattern = honeycomb
first_layer_extrusion_width = 250%
first_layer_height = 0.35
first_layer_speed = 30%
gap_fill_speed = 30
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 2
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 1
infill_speed = 100
layer_height = 0.15
min_skirt_length = 15
notes = 
only_retract_when_crossing_perimeters = 1
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 100
perimeters = 2
post_process = 
raft_layers = 0
randomize_start = 1
resolution = 0.2
skirt_distance = 2
skirt_height = 1
skirts = 1
small_perimeter_speed = 40
solid_fill_pattern = rectilinear
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 100
spiral_vase = 
support_material = 
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 120%
support_material_interface_layers = 4
support_material_interface_spacing = 1.5
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 60
threads = 4
top_infill_extrusion_width = 0
top_solid_infill_speed = 100
top_solid_layers = 1mm
travel_speed = 600
bed_temperature = 110
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 3
first_layer_bed_temperature = 110
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 25
temperature = 230