Lars Brubaker
a34e104773
Ensure we exhaust the command buffer before we switch E positions
...
Marlin firmware explicitly does not run out the command queue when switching e
this means we potentially have queue instructions with the wrong e position
2018-10-22 09:00:48 -07:00
Lars Brubaker
dad1f7fd7e
Re-slice test is passing again
2018-10-19 17:27:49 -07:00
Lars Brubaker
b237965def
Improving initial setup process.
...
issue: MatterHackers/MCCentral#4336
If setup needs to calibrate both the probe and the bed, heat both
issue: MatterHackers/MCCentral#4337
If temp changes too much from leveling temp, warn rather than require leveling
2018-10-19 15:53:07 -07:00
LarsBrubaker
133da5d35a
Making leveling test run a second leveling and test it changes
2018-10-18 14:58:35 -07:00
John Lewin
ec2098b721
Switch to hardware tab and open Add Printer dialog if "Print Button" missing
2018-10-18 14:45:12 -07:00
LarsBrubaker
12ac5507ef
removing the SID
...
issue: MatterHackers/MCCentral#4302
Remove SID from printer settings
2018-10-18 07:31:38 -07:00
John Lewin
e10133eb53
Revise expected control name for AddPrinter -> Next
2018-10-17 17:40:23 -07:00
Lars Brubaker
d5b06de172
Adding coast at end
...
mad travel render transparent
fixed layer identification in ms gcode
2018-10-17 13:49:56 -07:00
Lars Brubaker
dd4f6fb50e
Added middle click close tab
2018-10-16 17:08:32 -07:00
Lars Brubaker
6ddf344187
Getting the library popup to be vertically scallable
2018-10-16 16:23:39 -07:00
LarsBrubaker
36ed933268
Working on new side library docking tab
2018-10-15 10:36:44 -07:00
John Lewin
ee936efb8a
Revise theme support
2018-10-13 21:09:04 -07:00
LarsBrubaker
e9bc662dd3
Added primitives to the main MatterControl project
...
Experimenting with calling the 'Library' tab 'Designs'
2018-10-11 20:21:35 -07:00
John Lewin
2e1090f075
Code cleanup
2018-10-11 17:48:45 -07:00
Lars Brubaker
cf68818620
Make the library popup window have the correct height and resize
2018-10-11 17:25:01 -07:00
John Lewin
d63a1f8466
Don't clear background on node click
2018-10-11 15:05:14 -07:00
LarsBrubaker
a0138d5b02
Invalidate the view when the outline wireframe is ready
2018-10-11 07:57:23 -07:00
John Lewin
5781934ff3
Latest agg-sharp
2018-10-10 18:34:44 -07:00
Lars Brubaker
b1f2023210
Getting more tests to run on new ui
2018-10-10 13:34:18 -07:00
Lars Brubaker
87599a60f0
Re-Slice does not extrude or retract any extra filament now
2018-10-08 18:24:26 -07:00
Lars Brubaker
acbc67be9d
fixing menu close problem
...
issue: MatterHackers/MCCentral#4242
Menu close regression
2018-10-08 09:44:18 -07:00
Lars Brubaker
fa85d93742
Refactoring
2018-10-05 09:58:30 -07:00
LarsBrubaker
efe03cb642
Make flatten only copy appropriate properties by default
...
issue: MatterHackers/MCCentral#4229
Merge on align should not clear the colors that were on the objects
refactor apply and merge => flatten
2018-10-04 10:17:57 -07:00
John Lewin
137d3e8089
Latest agg-sharp
2018-10-03 13:08:10 -07:00
John Lewin
9ecb39a703
Simplify Winforms provider specification
2018-10-03 12:28:41 -07:00
John Lewin
e1a2291f96
Fix naming violations
2018-10-02 16:26:55 -07:00
Lars Brubaker
5fe8cb6da5
put up a waring message if the loaded gcode file is very small
...
issue: MatterHackers/MCCentral#4214
If gcode time is < 30 seconds put up a warning message
2018-10-02 14:45:08 -07:00
John Lewin
f0b83d33ea
Fix provider string
2018-10-02 13:57:38 -07:00
Lars Brubaker
3370828f45
put up a waring message if the loaded gcode file is very small
...
issue: MatterHackers/MCCentral#4214
If gcode time is < 30 seconds put up a warning message
2018-10-02 13:30:14 -07:00
John Lewin
e138b20d01
Replace Winforms single window mode with shared version
2018-10-02 08:12:44 -07:00
Lars Brubaker
a6feb8334d
Make sure we don't switch E value too early
...
issue: MatterHackers/MCCentral#4200
re-slice retracts too much filament after layer change
2018-10-01 15:42:09 -07:00
Lars Brubaker
23f776c77a
Better close logic on pop-ups when sub-pop-ups are open
2018-10-01 15:28:54 -07:00
John Lewin
aac33b70b8
Add support for hoverable IconButton
2018-09-29 15:05:19 -07:00
John Lewin
0cdd7b4729
Latest agg-sharp
2018-09-28 17:53:59 -07:00
Lars Brubaker
fd7f0b8518
Pass the printer time multiplier to matter slice so it can plan for the actual printer
...
fix math of minutes time estimate
2018-09-28 16:46:31 -07:00
Lars Brubaker
b0a7f15272
latest agg
2018-09-28 12:13:41 -07:00
John Lewin
5ca5747b8b
Fix issue with SelectedObjectPanel visibility
2018-09-28 12:01:54 -07:00
Lars Brubaker
57885c6bca
Dragging to be should have a 0 offset
2018-09-26 15:19:36 -07:00
Lars Brubaker
d324ea0e26
make sure we show the eula on all platforms
2018-09-26 14:10:09 -07:00
John Lewin
96ee613d91
Latest agg-sharp
2018-09-26 12:34:25 -07:00
Lars Brubaker
06c5224bb4
Building with new typography update
...
fixed a bug with dragging
2018-09-25 18:00:36 -07:00
Lars Brubaker
fb17d58fa4
Make insert do arrange as it adds parts
...
Make add to plate to arrange as it adds parts
Make sure parts that are arranged are on the 0 plane
issue: MatterHackers/MCCentral#4149
Using Insert doesn't center and arrange part on bed
2018-09-25 09:53:07 -07:00
Lars Brubaker
30ede4a4d8
latest agg
2018-09-24 17:46:42 -07:00
Lars Brubaker
238491ef8f
Don't return a value from ConditionallyCancelPrint (it was not used and is confusing)
...
issue: MatterHackers/MCCentral#1303
Review value of canceled response bool
2018-09-24 17:46:42 -07:00
LarsBrubaker
3e4150b1b6
Added new speed for air gap layer
2018-09-23 19:23:24 -07:00
LarsBrubaker
30cef6ef5a
Improving ungroup
...
issue: MatterHackers/MCCentral#4129
Content moves when ungrouped
2018-09-22 17:53:15 -07:00
Lars Brubaker
ef24e54b38
Fixed the test to account for changes in control names and behavior
2018-09-21 09:48:48 -07:00
Lars Brubaker
3d47cdb36d
Latest MS
2018-09-20 17:53:52 -07:00
Lars Brubaker
4874f35398
Latest MS
2018-09-20 16:18:24 -07:00
Lars Brubaker
7b0f3c4300
Render wireframe in gcode view
...
issue: MatterHackers/MCCentral#4160
Not rendering wire frame model correctly in gcode view
2018-09-20 15:19:06 -07:00
