John Lewin
2da691dadc
Revise config.ini tests, bring failing printers into compliance
...
- BCN Sigma: use extruder one for support material
- TAZ 6: replace curly braces with brackets
- Me3D: use temperature instead of first_layer_temperature
2016-05-23 15:30:26 -07:00
Greg
84cd73b6f6
Removed Esagono printer profile from StaticData. Also made sure all profiles have bottom_solid_layers is set to 1mm for all profiles.
2016-05-23 14:57:45 -07:00
gregory-diaz
a66f1baa3d
Added final changes from me3d
2016-03-11 15:11:33 -08:00
Greg
2310cc0a66
Added requested printer profile changes from Me3D
2016-02-24 10:07:00 -08:00
Gregory Diaz
721cbda1c3
Removed support_material_create_internal_support from most printer profiles.
2016-01-28 15:29:11 -08:00
Gregory Diaz
0e330b64d5
removed bottom_solid_layers from all config files except our default so that all profiles use the default value
2016-01-13 13:19:29 -08:00
Gregory Diaz
995a67a5a8
removed first_layer_extrusion_width from all config files other than our default config
2016-01-13 13:10:30 -08:00
Gregory Diaz
628fdc435f
Added requested ME3D profile changes
2015-10-14 12:28:27 -07:00
Gregory Diaz
1fc296c0f9
Added a calibration.ini file to all print profiles that did not previously have one.
2015-08-19 16:46:46 -07:00
Gregory Diaz
d6fb0f1aab
Makes sense to keep start and end gcode for this material(ME3D)
2015-07-28 08:18:32 -07:00
Gregory Diaz
4831f24691
Removed Start Gcode in material setting
2015-07-27 15:17:14 -07:00
Gregory Diaz
808f8740e9
Added updated config.ini, material and quality settings as well as macros for Me3d
2015-07-27 15:00:00 -07:00
Gregory Diaz
7bdd737ab0
top_solid_layers and bottom_solid_layers set to 1mm for all printers (requested by lars)
2015-05-08 18:04:30 -07:00
Lars Brubaker
86175bd500
Fixed some strange M190 settings in configs
...
Made the html widget not show debug
Made the mapping classes not use unsetable temperatures in MatterSlice
2015-04-14 15:27:11 -07:00
Gregory Diaz
95619c6e8e
removed all curly brackets from start/end/resume/ gcode and replaced them with square brackets.
2015-03-25 14:31:05 -07:00
Lars Brubaker
5435428d13
Changed the printer setups to default to no quality set by default.
...
Fixed a bug with the first add of history time.
2015-01-26 11:26:20 -08:00
Gregory Diaz
e379818f2b
Added default quality presets to all printers who did not have them already
2015-01-21 10:18:52 -08:00
Lars Brubaker
2b9dcc51c5
Made a unified MatterHackers serial driver for all known usbser boards
...
Put all printer setups onto our new driver.
2015-01-05 14:27:47 -08:00
Lars Brubaker
182191a464
Put in the right driver for Me3D
2014-12-11 18:07:25 -08:00
Gregory Diaz
d29ad1a80e
New slice config files for Me3D
2014-12-11 17:32:08 -08:00
Lars Brubaker
e4fb600739
Updated the retract_before_travel to be 20 for all builds.
...
Made multi extruder temps get read correctly.
Signed the arduino inf and made our installer install it.
2014-11-17 17:42:15 -08:00
larsbrubaker
eff820f567
Turned on avaid_crossing_perimeters by default.
2014-10-08 11:28:59 -07:00
gregory-diaz
ce67d6e004
Added Printer and Slice Setting information for Me3D and Revolution 3D
2014-09-02 16:33:17 -07:00
