nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Latest Profiles

Browse source
This commit is contained in:
John Lewin 2016-12-21 11:27:36 -08:00
parent 91b6d98e82
commit d542249e63
21 changed files with 1630 additions and 28 deletions
Download patch file Download diff file Expand all files Collapse all files

263
StaticData/Profiles/3D Cloner/DH Plus.printer Normal file
View file

@ -0,0 +1,263 @@
{
"DocumentVersion": 201606271,
"ID": "Other-5101247835668480",
"StagedUserSettings": {},
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "320,320",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "400",
"cancel_gcode": "G1 X5 Y300 F10800\\nG28 X Y",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "G91\\nG1 E-2 F300 ; Recolhe 2mm de Filamento\\nM104 S0 ; Desliga aquecimento\\nM190 S0 ; Desliga a Mesa\\nM107 ;Desliga Ventiladores\\nG90\\nG1 X5 Y205 F10800 ; Movimento RĂĄpido \\nG28 X Y ; Recolhe eixos X e Y\\n",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "3",
"fill_angle": "45",
"fill_density": "0.4",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "30%",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "1",
"has_power_control": "0",
"has_sd_card_reader": "1",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.4",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": ".1",
"min_fan_speed": "35",
"min_print_speed": "10",
"min_skirt_length": "0",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X5 Y300 F10800",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "160,160",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": ".2",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "20",
"retract_layer_change": "1",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "30",
"show_reset_connection": "0",
"skirt_distance": "6",
"skirt_height": "1",
"skirts": "1",
"slowdown_below_layer_time": "30",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; Home de todos os eixos\\nG1 Z5 F5000 ; Move a mesa 5mm para baixo\\nM190 S[bed_temperature] ;Aquece a Mesa\\nM104 S[temperature] ; Aquece a [temperature]°C\\nM109 S[temperature] ; Aguarda o aquecimento\\nG1 E15 F100 ; Extruda 15mm para limpesa do Extrusor\\nG92 E0 ; Reseta o Extrusor\\n; Powered By 3DCloner DH Plus",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": ".9mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "60",
"support_material_threshold": "0",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": ".3mm",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "1mm",
"travel_speed": "130",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Cloner",
"model": "DH Plus",
"created_date": "2016-12-20T18:10:21.511Z",
"baud_rate": "250000",
"default_material_presets": "PLA",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl",
"oem_profile_token": "ag9zfm1hdHRlcmNvbnRyb2xyQwsSCUFmZmlsaWF0ZRiAgKCq19StCgwLEgZEZXZpY2UYgICAgIDDlQoMCxINRGV2aWNlUHJvZmlsZRiAgICAgNeMCgw",
"active_theme_name": "Red - Dark",
"active_quality_key": "4cce9610-482f-4e6b-88d7-781f1d772f0c"
},
"ActiveQualityKey": "4cce9610-482f-4e6b-88d7-781f1d772f0c",
"MaterialSettingsKeys": [
"378fe860-c0e7-45a3-a3bb-27d621d31344"
],
"MaterialLayers": [
{
"layer_name": "PLA",
"layer_id": "378fe860-c0e7-45a3-a3bb-27d621d31344",
"filament_diameter": "1.75",
"temperature": "210",
"bed_temperature": "60",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"min_print_speed": "10",
"min_fan_speed": "30",
"disable_fan_first_layers": "3",
"max_fan_speed": "60"
},
{
"layer_name": "ABS",
"layer_id": "945a2da3-766a-424d-bd72-40a6be4d9d33",
"filament_diameter": "1.75",
"filament_density": "1.04",
"temperature": "260",
"bed_temperature": "120",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "60",
"disable_fan_first_layers": "3",
"min_fan_speed": "30"
},
{
"layer_name": "PETG",
"layer_id": "51b6cb95-7290-4dd3-ab1f-e23aa9b22cad",
"filament_diameter": "1.75",
"filament_density": "1.27",
"temperature": "255",
"bed_temperature": "100",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "60",
"disable_fan_first_layers": "3",
"min_fan_speed": "30"
}
],
"QualityLayers": [
{
"layer_name": "Alta",
"layer_id": "07188db0-aa0e-4bb6-bfb1-0c21e95fc616",
"layer_height": "0.1",
"first_layer_height": "0.2",
"fill_density": "40%",
"infill_type": "LINES",
"external_perimeter_speed": "30",
"travel_speed": "180",
"first_layer_speed": "30"
},
{
"layer_name": "Baixa",
"layer_id": "b2e15857-1cc7-4213-8504-754d7005b5e7",
"layer_height": "0.3",
"fill_density": "10%",
"infill_type": "LINES",
"infill_speed": "70",
"top_solid_infill_speed": "60",
"perimeter_speed": "60",
"external_perimeter_speed": "60",
"travel_speed": "180"
},
{
"layer_name": "Media",
"layer_id": "4cce9610-482f-4e6b-88d7-781f1d772f0c",
"layer_height": "0.2",
"fill_density": "30%",
"infill_type": "LINES",
"perimeter_speed": "45",
"external_perimeter_speed": "45",
"travel_speed": "180",
"layer_etag": "",
"layer_source": "",
"max_fan_speed": "70",
"bridge_fan_speed": "100",
"first_layer_speed": "50"
}
]
}

272
StaticData/Profiles/3D Cloner/DH+.printer Normal file
View file

@ -0,0 +1,272 @@
{
"DocumentVersion": 201606271,
"ID": "Other-6525308348399616",
"StagedUserSettings": {
"infill_type": "LINES",
"perimeter_speed": "35",
"fill_density": "5%",
"external_perimeter_speed": "35",
"layer_height": "0.2"
},
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "320,210",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "400",
"cancel_gcode": "G1 X5 Y190 F10800\\nG28 X Y",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "G91\\nG1 E-2 F300 ; Recolhe 2mm de Filamento\\nM104 S0 ; Desliga aquecimento\\nM107 ;Desliga Ventiladores\\nG90\\nG1 X5 Y205 F10800 ; Movimento Rápido \\nG28 X Y ; Recolhe eixos X e Y",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "3",
"fill_angle": "45",
"fill_density": "0.4",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "30%",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "0",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.4",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": ".1",
"min_fan_speed": "35",
"min_print_speed": "10",
"min_skirt_length": "0",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X5 Y190 F10800",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "160,105",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": ".2",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "20",
"retract_layer_change": "1",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "30",
"show_reset_connection": "0",
"skirt_distance": "6",
"skirt_height": "1",
"skirts": "1",
"slowdown_below_layer_time": "30",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; Home de todos os eixos\\nG1 Z5 F5000 ; Move a mesa 5mm para baixo\\nM104 S[temperature] ; Aquece a [temperature]°C\\nM109 S[temperature] ; Aguarda o aquecimento\\nG1 E15 F100 ; Extruda 15mm para limpesa do Extrusor\\nG92 E0 ; Reseta o Extrusor\\nM206 X800 ; Rampa de Aceleração e Desaceleração\\n; Powered By 3DCloner DH+",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": ".9mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "60",
"support_material_threshold": "0",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": ".3mm",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "1mm",
"travel_speed": "130",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Cloner",
"model": "DH+",
"created_date": "2016-12-20T18:09:57.619Z",
"baud_rate": "9600",
"default_material_presets": "PLA",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl",
"oem_profile_token": "ag9zfm1hdHRlcmNvbnRyb2xyQwsSCUFmZmlsaWF0ZRiAgKCq19StCgwLEgZEZXZpY2UYgICAgIDDlQoMCxINRGV2aWNlUHJvZmlsZRiAgICAgNeMCgw",
"active_theme_name": "Blue - Dark",
"active_quality_key": "4cce9610-482f-4e6b-88d7-781f1d772f0c",
"filament_cost": "180",
"publish_bed_image": "1"
},
"ActiveQualityKey": "4cce9610-482f-4e6b-88d7-781f1d772f0c",
"MaterialSettingsKeys": [
"378fe860-c0e7-45a3-a3bb-27d621d31344"
],
"MaterialLayers": [
{
"layer_name": "PLA",
"layer_id": "378fe860-c0e7-45a3-a3bb-27d621d31344",
"filament_diameter": "1.75",
"temperature": "210",
"bed_temperature": "60",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"min_print_speed": "10",
"min_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15"
},
{
"layer_name": "ABS",
"layer_id": "945a2da3-766a-424d-bd72-40a6be4d9d33",
"filament_diameter": "1.75",
"filament_density": "1.04",
"temperature": "260",
"bed_temperature": "120",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"min_fan_speed": "100",
"extrusion_multiplier": "1.15"
},
{
"layer_name": "PETG",
"layer_id": "51b6cb95-7290-4dd3-ab1f-e23aa9b22cad",
"filament_diameter": "1.75",
"filament_density": "1.27",
"temperature": "255",
"bed_temperature": "100",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15",
"min_fan_speed": "100"
}
],
"QualityLayers": [
{
"layer_name": "Alta",
"layer_id": "07188db0-aa0e-4bb6-bfb1-0c21e95fc616",
"layer_height": "0.1",
"first_layer_height": "0.2",
"fill_density": "40%",
"infill_type": "LINES",
"external_perimeter_speed": "30",
"travel_speed": "180",
"first_layer_speed": "30"
},
{
"layer_name": "Baixa",
"layer_id": "b2e15857-1cc7-4213-8504-754d7005b5e7",
"layer_height": "0.3",
"fill_density": "10%",
"infill_type": "LINES",
"infill_speed": "70",
"top_solid_infill_speed": "60",
"perimeter_speed": "60",
"external_perimeter_speed": "60",
"travel_speed": "180",
"first_layer_speed": "30"
},
{
"layer_name": "Media",
"layer_id": "4cce9610-482f-4e6b-88d7-781f1d772f0c",
"layer_height": "0.2",
"fill_density": "30%",
"infill_type": "LINES",
"perimeter_speed": "45",
"external_perimeter_speed": "45",
"travel_speed": "180",
"layer_etag": "",
"layer_source": "",
"first_layer_speed": "30"
}
]
}

268
StaticData/Profiles/3D Cloner/DH.printer Normal file
View file

@ -0,0 +1,268 @@
{
"DocumentVersion": 201606271,
"ID": "Other-6237040318873600",
"StagedUserSettings": {
"infill_type": "LINES",
"layer_height": "0.2",
"perimeter_speed": "70",
"fill_density": "10%",
"travel_speed": "120",
"external_perimeter_speed": "35",
"extrusion_multiplier": "1.15"
},
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "320,210",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "400",
"cancel_gcode": "G1 X5 Y190 F7200\\nG28 X Y",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "G91\\nG1 E-2 F300 ; Recolhe 2mm de Filamento\\nM104 S0 ; Desliga aquecimento\\nM107 ;Desliga Ventiladores\\nG90\\nG1 X5 Y205 F7200 ; Movimento Rápido \\nG28 X Y ; Recolhe eixos X e Y\\n",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "3",
"fill_angle": "45",
"fill_density": "0.4",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "30%",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "0",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.4",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": ".1",
"min_fan_speed": "35",
"min_print_speed": "10",
"min_skirt_length": "0",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X5 Y190 F7200",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "160,105",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": ".2",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "20",
"retract_layer_change": "1",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "30",
"show_reset_connection": "0",
"skirt_distance": "6",
"skirt_height": "1",
"skirts": "1",
"slowdown_below_layer_time": "30",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; Home de todos os eixos\\nG1 Z5 F5000 ; Move a mesa 5mm para baixo\\nM104 S[temperature] ; Aquece a [temperature]°C\\nM109 S[temperature] ; Aguarda o aquecimento\\nG1 E15 F100 ; Extruda 15mm para limpesa do Extrusor\\nG92 E0 ; Reseta o Extrusor\\nM206 X600 ; Rampa de Aceleração e Desaceleração\\n; Powered By 3DCloner DH",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": ".9mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "60",
"support_material_threshold": "0",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": ".3mm",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "1mm",
"travel_speed": "130",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Cloner",
"model": "DH",
"created_date": "2016-12-20T18:09:34.729Z",
"baud_rate": "9600",
"default_material_presets": "PLA",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl",
"oem_profile_token": "ag9zfm1hdHRlcmNvbnRyb2xyQwsSCUFmZmlsaWF0ZRiAgKCq19StCgwLEgZEZXZpY2UYgICAgIDDlQoMCxINRGV2aWNlUHJvZmlsZRiAgICAgNeMCgw",
"active_theme_name": "Red - Dark",
"active_quality_key": "5d8ed633-6c87-462d-98e5-50a1b9e0e5c8",
"brims": "5"
},
"ActiveQualityKey": "5d8ed633-6c87-462d-98e5-50a1b9e0e5c8",
"MaterialSettingsKeys": [
"378fe860-c0e7-45a3-a3bb-27d621d31344"
],
"MaterialLayers": [
{
"layer_name": "PLA",
"layer_id": "378fe860-c0e7-45a3-a3bb-27d621d31344",
"filament_diameter": "1.75",
"temperature": "210",
"bed_temperature": "60",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"min_print_speed": "10",
"min_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15"
},
{
"layer_name": "ABS",
"layer_id": "945a2da3-766a-424d-bd72-40a6be4d9d33",
"filament_diameter": "1.75",
"filament_density": "1.04",
"temperature": "260",
"bed_temperature": "120",
"first_layer_extrusion_width": "0",
"external_perimeter_extrusion_width": "0",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15",
"min_fan_speed": "100"
},
{
"layer_name": "PETG",
"layer_id": "51b6cb95-7290-4dd3-ab1f-e23aa9b22cad",
"filament_diameter": "1.75",
"filament_density": "1.27",
"temperature": "255",
"bed_temperature": "100",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15",
"min_fan_speed": "100"
}
],
"QualityLayers": [
{
"layer_name": "Media",
"layer_id": "5d8ed633-6c87-462d-98e5-50a1b9e0e5c8",
"layer_height": "0.2",
"fill_density": "30%",
"infill_type": "LINES",
"perimeter_speed": "45",
"external_perimeter_speed": "45",
"travel_speed": "120"
},
{
"layer_name": "Alta",
"layer_id": "07188db0-aa0e-4bb6-bfb1-0c21e95fc616",
"layer_height": "0.1",
"first_layer_height": "0.2",
"fill_density": "40%",
"infill_type": "LINES",
"external_perimeter_speed": "30",
"travel_speed": "120"
},
{
"layer_name": "Baixa",
"layer_id": "b2e15857-1cc7-4213-8504-754d7005b5e7",
"layer_height": "0.3",
"fill_density": "10%",
"infill_type": "LINES",
"infill_speed": "70",
"top_solid_infill_speed": "60",
"perimeter_speed": "60",
"external_perimeter_speed": "60",
"travel_speed": "120"
}
]
}

268
StaticData/Profiles/3D Cloner/LAB.printer Normal file
View file

@ -0,0 +1,268 @@
{
"DocumentVersion": 201606271,
"ID": "LAB-4509197549436928",
"StagedUserSettings": {
"first_layer_extrusion_width": "100%"
},
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_shape": "rectangular",
"bed_size": "200,200",
"bed_temperature": "60",
"bottom_clip_amount": "",
"bottom_solid_layers": "1mm",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "90",
"brim_width": "0",
"build_height": "200",
"cancel_gcode": "G1 X5 Y190 F6000\\nG28 X Y",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"print_leveling_solution": "3 Point Plane",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"manual_probe_paper_width": "0.1",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "3",
"end_gcode": "G91\\nG1 E-2 F300 ; Recolhe 2mm de Filamento\\nM104 S0 ; Desliga aquecimento\\nM190 S0\\nM107 ;Desliga Ventiladores\\nG90\\nG1 X5 Y190 F6000 ; Movimento Rápido \\nG28 X Y ; Recolhe eixos X e Y\\nM84 ; Desabilita motores\\nM81 ; Desliga Fonte\\nG92 E0 ; Reseta o Extrusor",
"external_perimeter_speed": "40",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.75",
"fill_angle": "45",
"fill_density": "30%",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_extrusion_width": "250%",
"first_layer_height": "0.25",
"first_layer_speed": "35",
"first_layer_temperature": "220",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "1",
"has_power_control": "1",
"has_sd_card_reader": "1",
"show_reset_connection": "1",
"heat_extruder_before_homing": "0",
"include_firmware_updater": "None",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "70",
"infill_type": "LINES",
"layer_gcode": "",
"layer_height": "0.2",
"layer_to_pause": "",
"max_fan_speed": "100",
"min_extrusion_before_retract": ".1",
"min_fan_speed": "50",
"min_print_speed": "30",
"min_skirt_length": "0",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X5 Y190 F6000",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"external_perimeter_extrusion_width": "100%",
"perimeter_speed": "70",
"perimeters": "3",
"post_process": "",
"print_center": "100,100",
"raft_air_gap": ".2",
"raft_extruder": "0",
"raft_extra_distance_around_part": "5",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "50",
"bed_remove_part_temperature": "0",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "20",
"retract_layer_change": "1",
"retract_length": "2",
"retract_length_tool_change": "10",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_islands": "1",
"retract_speed": "30",
"skirt_distance": "3",
"skirt_height": "1",
"skirts": "2",
"slowdown_below_layer_time": "30",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; Home de todos os eixos\\nM190 S[bed_temperature] ;Aquece a Mesa\\nM104 S[temperature] ; Aquece a [temperature]°C\\nM109 S[temperature] ; Aguarda o aquecimento\\nG92 E0 ; Reseta o Extrusor\\nM204 T300 R1200 S300 ; Rampa de Aceleração e Desaceleração\\n\\nM117 Imprimindo...\\n\\n; Powered By 3DCloner_LAB",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_air_gap": ".3",
"support_material": "1",
"support_material_angle": "45",
"support_material_percent": "50",
"support_material_create_internal_support": "0",
"support_material_create_perimeter": "1",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": ".9mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "60",
"support_material_threshold": "0",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": ".3mm",
"support_type": "LINES",
"temperature": "220",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "70",
"top_solid_layers": "1mm",
"travel_speed": "100",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Cloner",
"model": "LAB",
"baud_rate": "250000",
"auto_connect": "0",
"default_material_presets": "13",
"windows_driver": "",
"device_type": "",
"active_theme_name": null,
"publish_bed_image": "0",
"manual_movement_speeds": null,
"active_quality_key": "e13c5d1b-4957-44a7-90db-2ae18aeea0c3",
"created_date": "2016-12-20T17:56:43.250Z"
},
"ActiveQualityKey": "e13c5d1b-4957-44a7-90db-2ae18aeea0c3",
"MaterialSettingsKeys": [
"365c904a-1909-4e6e-b33c-e5d7638703e3"
],
"MaterialLayers": [
{
"temperature": "260",
"extrusion_multiplier": "1",
"min_fan_speed": "30",
"bed_temperature": "110",
"max_fan_speed": "60",
"layer_id": "ec9e5177-c61f-401f-a337-c024d2885276",
"layer_name": "ABS",
"first_layer_extrusion_width": "100%",
"min_print_speed": "10"
},
{
"temperature": "250",
"max_fan_speed": "60",
"extrusion_multiplier": "1",
"min_fan_speed": "30",
"bed_temperature": "80",
"layer_id": "91055824-47c4-4ee4-b16d-b5e046d17ff1",
"layer_name": "PET",
"first_layer_extrusion_width": "100%",
"min_print_speed": "10"
},
{
"temperature": "210",
"max_fan_speed": "60",
"extrusion_multiplier": "1",
"min_fan_speed": "30",
"bed_temperature": "60",
"layer_id": "365c904a-1909-4e6e-b33c-e5d7638703e3",
"layer_name": "PLA",
"first_layer_extrusion_width": "100%",
"min_print_speed": "10"
}
],
"QualityLayers": [
{
"layer_height": "0.1",
"infill_speed": "70",
"perimeter_speed": "70",
"external_perimeter_speed": "35",
"bridge_speed": "90",
"first_layer_speed": "35",
"layer_id": "e75bc83e-f191-4ef6-827d-b1a821296845",
"layer_name": "Alta",
"fill_density": "30%",
"first_layer_height": "0.2"
},
{
"layer_height": "0.2",
"infill_speed": "70",
"perimeter_speed": "70",
"external_perimeter_speed": "45",
"bridge_speed": "90",
"first_layer_speed": "35",
"layer_id": "e13c5d1b-4957-44a7-90db-2ae18aeea0c3",
"layer_name": "Normal",
"first_layer_height": "0.3"
},
{
"layer_height": "0.3",
"infill_speed": "70",
"perimeter_speed": "70",
"external_perimeter_speed": "60",
"bridge_speed": "90",
"first_layer_speed": "35",
"layer_id": "b386aff2-5870-4f22-9529-cdbc8908f812",
"layer_name": "Rascunho",
"first_layer_height": "0.3",
"fill_density": "10%"
}
]
}

267
StaticData/Profiles/3D Cloner/ST+.printer Normal file
View file

@ -0,0 +1,267 @@
{
"DocumentVersion": 201606271,
"ID": "Other-4838805738094592",
"StagedUserSettings": {
"layer_height": "0.2",
"external_perimeter_speed": "35",
"perimeter_speed": "35",
"infill_type": "LINES",
"fill_density": "30%"
},
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "320,210",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "160",
"cancel_gcode": "G1 X5 Y190 F10800\\nG28 X Y",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "G91\\nG1 E-2 F300 ; Recolhe 2mm de Filamento\\nM104 S0 ; Desliga aquecimento\\nM107 ;Desliga Ventiladores\\nG90\\nG1 X5 Y205 F10800 ; Movimento Rápido \\nG28 X Y ; Recolhe eixos X e Y\\n",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "3",
"fill_angle": "45",
"fill_density": "0.4",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "30%",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "0",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.4",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": ".1",
"min_fan_speed": "35",
"min_print_speed": "10",
"min_skirt_length": "0",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X5 Y190 F10800",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "160,105",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": ".2",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "20",
"retract_layer_change": "1",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "30",
"show_reset_connection": "0",
"skirt_distance": "6",
"skirt_height": "1",
"skirts": "1",
"slowdown_below_layer_time": "30",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; Home de todos os eixos\\nG1 Z5 F5000 ; Move a mesa 5mm para baixo\\nM104 S[temperature] ; Aquece a [temperature]°C\\nM109 S[temperature] ; Aguarda o aquecimento\\nG1 E15 F100 ; Extruda 15mm para limpesa do Extrusor\\nG92 E0 ; Reseta o Extrusor\\nM206 X800 ; Rampa de Aceleração e Desaceleração\\n; Powered By 3DCloner ST+",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": ".9mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "60",
"support_material_threshold": "0",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": ".3mm",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "1mm",
"travel_speed": "130",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Cloner",
"model": "ST+",
"created_date": "2016-12-20T17:57:45.531Z",
"baud_rate": "9600",
"default_material_presets": "PLA",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl",
"oem_profile_token": "ag9zfm1hdHRlcmNvbnRyb2xyQwsSCUFmZmlsaWF0ZRiAgKCq19StCgwLEgZEZXZpY2UYgICAgIDDlQoMCxINRGV2aWNlUHJvZmlsZRiAgICAgNeMCgw",
"active_theme_name": "Red - Dark",
"active_quality_key": "4cce9610-482f-4e6b-88d7-781f1d772f0c"
},
"ActiveQualityKey": "4cce9610-482f-4e6b-88d7-781f1d772f0c",
"MaterialSettingsKeys": [
"378fe860-c0e7-45a3-a3bb-27d621d31344"
],
"MaterialLayers": [
{
"layer_name": "PLA",
"layer_id": "378fe860-c0e7-45a3-a3bb-27d621d31344",
"filament_diameter": "1.75",
"temperature": "210",
"bed_temperature": "60",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"min_print_speed": "10",
"min_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15"
},
{
"layer_name": "ABS",
"layer_id": "945a2da3-766a-424d-bd72-40a6be4d9d33",
"filament_diameter": "1.75",
"filament_density": "1.04",
"temperature": "260",
"bed_temperature": "120",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15",
"min_fan_speed": "100"
},
{
"layer_name": "PETG",
"layer_id": "51b6cb95-7290-4dd3-ab1f-e23aa9b22cad",
"filament_diameter": "1.75",
"filament_density": "1.27",
"temperature": "255",
"bed_temperature": "100",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15",
"min_fan_speed": "100"
}
],
"QualityLayers": [
{
"layer_name": "Alta",
"layer_id": "07188db0-aa0e-4bb6-bfb1-0c21e95fc616",
"layer_height": "0.1",
"first_layer_height": "0.2",
"fill_density": "40%",
"infill_type": "LINES",
"external_perimeter_speed": "30",
"travel_speed": "180"
},
{
"layer_name": "Baixa",
"layer_id": "b2e15857-1cc7-4213-8504-754d7005b5e7",
"layer_height": "0.3",
"fill_density": "10%",
"infill_type": "LINES",
"infill_speed": "70",
"top_solid_infill_speed": "60",
"perimeter_speed": "60",
"external_perimeter_speed": "60",
"travel_speed": "180"
},
{
"layer_name": "Media",
"layer_id": "4cce9610-482f-4e6b-88d7-781f1d772f0c",
"layer_height": "0.2",
"fill_density": "30%",
"infill_type": "LINES",
"perimeter_speed": "45",
"external_perimeter_speed": "45",
"travel_speed": "180",
"layer_etag": "",
"layer_source": ""
}
]
}

261
StaticData/Profiles/3D Cloner/ST.printer Normal file
View file

@ -0,0 +1,261 @@
{
"DocumentVersion": 201606271,
"ID": "Other-5698492297641984",
"StagedUserSettings": {
"travel_speed": "120"
},
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "320,210",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "160",
"cancel_gcode": "G1 X5 Y190 F7200\\nG28 X Y",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "G91\\nG1 E-2 F300 ; Recolhe 2mm de Filamento\\nM104 S0 ; Desliga aquecimento\\nM107 ;Desliga Ventiladores\\nG90\\nG1 X5 Y205 F7200 ; Movimento Rápido \\nG28 X Y ; Recolhe eixos X e Y\\n",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "3",
"fill_angle": "45",
"fill_density": "0.4",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "30%",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "0",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.4",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": ".1",
"min_fan_speed": "35",
"min_print_speed": "10",
"min_skirt_length": "0",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X5 Y190 F7200",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "160,105",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": ".2",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "20",
"retract_layer_change": "1",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "30",
"show_reset_connection": "0",
"skirt_distance": "6",
"skirt_height": "1",
"skirts": "1",
"slowdown_below_layer_time": "30",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 ; Home de todos os eixos\\nG1 Z5 F5000 ; Move a mesa 5mm para baixo\\nM104 S[temperature] ; Aquece a [temperature]°C\\nM109 S[temperature] ; Aguarda o aquecimento\\nG1 E15 F100 ; Extruda 15mm para limpesa do Extrusor\\nG92 E0 ; Reseta o Extrusor\\nM206 X600 ; Rampa de Aceleração e Desaceleração\\n; Powered By 3DCloner ST",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": ".9mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "60",
"support_material_threshold": "0",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": ".3mm",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "1mm",
"travel_speed": "130",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Cloner",
"model": "ST",
"created_date": "2016-12-20T17:57:22.256Z",
"baud_rate": "9600",
"default_material_presets": "PLA",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl",
"oem_profile_token": "ag9zfm1hdHRlcmNvbnRyb2xyQwsSCUFmZmlsaWF0ZRiAgKCq19StCgwLEgZEZXZpY2UYgICAgIDDlQoMCxINRGV2aWNlUHJvZmlsZRiAgICAgNeMCgw",
"active_theme_name": "Red - Dark",
"active_quality_key": "5d8ed633-6c87-462d-98e5-50a1b9e0e5c8"
},
"ActiveQualityKey": "5d8ed633-6c87-462d-98e5-50a1b9e0e5c8",
"MaterialSettingsKeys": [
"51b6cb95-7290-4dd3-ab1f-e23aa9b22cad"
],
"MaterialLayers": [
{
"layer_name": "PLA",
"layer_id": "378fe860-c0e7-45a3-a3bb-27d621d31344",
"filament_diameter": "1.75",
"temperature": "210",
"bed_temperature": "60",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"min_print_speed": "10",
"min_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15"
},
{
"layer_name": "ABS",
"layer_id": "945a2da3-766a-424d-bd72-40a6be4d9d33",
"filament_diameter": "1.75",
"filament_density": "1.04",
"temperature": "260",
"bed_temperature": "120",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15",
"min_fan_speed": "100"
},
{
"layer_name": "PETG",
"layer_id": "51b6cb95-7290-4dd3-ab1f-e23aa9b22cad",
"filament_diameter": "1.75",
"filament_density": "1.27",
"temperature": "255",
"bed_temperature": "100",
"first_layer_extrusion_width": "100%",
"external_perimeter_extrusion_width": "100%",
"max_fan_speed": "100",
"disable_fan_first_layers": "3",
"extrusion_multiplier": "1.15",
"min_fan_speed": "100"
}
],
"QualityLayers": [
{
"layer_name": "Media",
"layer_id": "5d8ed633-6c87-462d-98e5-50a1b9e0e5c8",
"layer_height": "0.2",
"fill_density": "30%",
"infill_type": "LINES",
"perimeter_speed": "45",
"external_perimeter_speed": "45",
"travel_speed": "120"
},
{
"layer_name": "Alta",
"layer_id": "07188db0-aa0e-4bb6-bfb1-0c21e95fc616",
"layer_height": "0.1",
"first_layer_height": "0.2",
"fill_density": "40%",
"infill_type": "LINES",
"external_perimeter_speed": "30",
"travel_speed": "120"
},
{
"layer_name": "Baixa",
"layer_id": "b2e15857-1cc7-4213-8504-754d7005b5e7",
"layer_height": "0.3",
"fill_density": "10%",
"infill_type": "LINES",
"infill_speed": "70",
"top_solid_infill_speed": "60",
"perimeter_speed": "60",
"external_perimeter_speed": "60",
"travel_speed": "120"
}
]
}