Printer profile changes and Wanhao manufacturer name change

StaticData/OEMSettings/Settings.json

@@ -30,7 +30,7 @@
     "SeeMeCNC",
     "Solidoodle",
     "Type A Machines",
-    "Wanhao USA",
+    "Wanhao",
     "Velleman",
   ],
   "ManufacturerNameMappings": [

StaticData/PrinterSettings/SeeMeCNC/Eris/config.ini

@@ -55,7 +55,6 @@ infill_extruder = 1
 infill_extrusion_width = 0.6
 infill_first = 
 infill_only_where_needed = 0
-infill_overlap_perimeter = 0.06
 infill_speed = 40
 infill_type = TRIANGLES
 layer_gcode = 
@@ -100,7 +99,7 @@ retract_speed = 110
 skirt_distance = 3
 skirt_height = 1
 skirts = 2
-slowdown_below_layer_time = 40
+slowdown_below_layer_time = 20
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 20

StaticData/PrinterSettings/SeeMeCNC/Eris/material/PLA.slice

@@ -6,5 +6,4 @@ min_fan_speed = 60
 max_fan_speed = 100
 bridge_fan_speed = 100
 disable_fan_first_layers = 2
-slowdown_below_layer_time = 40
 min_print_speed = 5

StaticData/PrinterSettings/SeeMeCNC/Orion/config.ini

@@ -56,7 +56,6 @@ infill_extruder = 1
 infill_extrusion_width = 0.6
 infill_first = 
 infill_only_where_needed = 0
-infill_overlap_perimeter = 0.06
 infill_speed = 40
 infill_type = TRIANGLES
 layer_gcode = 
@@ -101,7 +100,7 @@ retract_speed = 110
 skirt_distance = 3
 skirt_height = 1
 skirts = 2
-slowdown_below_layer_time = 40
+slowdown_below_layer_time = 20
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 20

StaticData/PrinterSettings/SeeMeCNC/Orion/material/ABS.slice

@@ -6,5 +6,4 @@ min_fan_speed = 0
 max_fan_speed = 0
 bridge_fan_speed = 100
 disable_fan_first_layers = 0
-slowdown_below_layer_time = 40
 min_print_speed = 5

StaticData/PrinterSettings/SeeMeCNC/Orion/material/PLA.slice

@@ -6,5 +6,4 @@ min_fan_speed = 60
 max_fan_speed = 100
 bridge_fan_speed = 100
 disable_fan_first_layers = 2
-slowdown_below_layer_time = 40
 min_print_speed = 5

StaticData/PrinterSettings/SeeMeCNC/RostockMAX/config.ini

@@ -58,7 +58,6 @@ infill_extruder = 1
 infill_extrusion_width = 0.6
 infill_first = 
 infill_only_where_needed = 0
-infill_overlap_perimeter = 0.06
 infill_speed = 40
 infill_type = TRIANGLES
 layer_gcode = 
@@ -101,7 +100,7 @@ retract_speed = 110
 skirt_distance = 3
 skirt_height = 1
 skirts = 2
-slowdown_below_layer_time = 40
+slowdown_below_layer_time = 20
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 20