Created MatterHacker's settings for the TAZ Mini

CustomWidgets/SolidSlider.cs

@@ -167,16 +167,20 @@ namespace MatterHackers.MatterControl
             }
             set
             {
-                double newPosition0To1 = Math.Max(0, Math.Min((value - Minimum) / (Maximum - Minimum), 1));
-                if (newPosition0To1 != Position0To1)
-                {
-                    Position0To1 = newPosition0To1;
-                    if (ValueChanged != null)
-                    {
-                        ValueChanged(this, null);
-                    }
-                    Invalidate();
-                }
+				double newPosition0To1 = Minimum;
+				if (Maximum - Minimum != 0)
+				{
+					newPosition0To1 = Math.Max(0, Math.Min((value - Minimum) / (Maximum - Minimum), 1));
+				}
+				if (newPosition0To1 != Position0To1)
+				{
+					Position0To1 = newPosition0To1;
+					if (ValueChanged != null)
+					{
+						ValueChanged(this, null);
+					}
+					Invalidate();
+				}
             }
         }
 

PrinterCommunication/PrinterConnectionAndCommunication.cs

@@ -129,6 +129,8 @@ namespace MatterHackers.MatterControl.PrinterCommunication
         static PrinterConnectionAndCommunication globalInstance;
         string connectionFailureMessage = "Unknown Reason";
 
+		bool waitingForPosition = false;
+
         public string ConnectionFailureMessage { get { return connectionFailureMessage; } }
 
         public RootedObjectEventHandler ActivePrintItemChanged = new RootedObjectEventHandler();
@@ -1193,6 +1195,8 @@ namespace MatterHackers.MatterControl.PrinterCommunication
             }
 
             PositionRead.CallEvents(this, null);
+
+			waitingForPosition = false;
         }
 
         double currentSdBytes = 0;
@@ -1590,11 +1594,6 @@ namespace MatterHackers.MatterControl.PrinterCommunication
                         readFromPrinterThread.Name = "Read From Printer";
                         readFromPrinterThread.IsBackground = true;
                         readFromPrinterThread.Start();
-
-                        // let's check if the printer will talk to us
-                        ReadPosition();
-                        SendLineToPrinterNow("M105");
-                        SendLineToPrinterNow("M115");
                     }
                     catch (System.ArgumentOutOfRangeException)
                     {
@@ -2097,7 +2096,7 @@ namespace MatterHackers.MatterControl.PrinterCommunication
             bool pauseRequested = false;
             using (TimedLock.Lock(this, "WriteNextLineFromGCodeFile2"))
             {
-                if (printerCommandQueueIndex < loadedGCode.Count)
+				if (printerCommandQueueIndex < loadedGCode.Count)
                 {
                     if (firstLineToResendIndex < allCheckSumLinesSent.Count)
                     {
@@ -2105,9 +2104,21 @@ namespace MatterHackers.MatterControl.PrinterCommunication
                     }
                     else
                     {
-                        string lineToWrite = loadedGCode.Instruction(printerCommandQueueIndex).Line;
+						if (waitingForPosition)
+						{
+							// we are wating for a postion response don't print more
+							return;
+						}
+
+						string lineToWrite = loadedGCode.Instruction(printerCommandQueueIndex).Line;
                         string[] splitOnSemicolon = lineToWrite.Split(';');
                         string trimedLine = splitOnSemicolon[0].Trim().ToUpper();
+
+						if (lineToWrite.Contains("M114"))
+						{
+							waitingForPosition = true;
+						}
+						
                         if (trimedLine.Length > 0)
                         {
                             if (lineToWrite == "MH_PAUSE")
@@ -2431,6 +2442,7 @@ namespace MatterHackers.MatterControl.PrinterCommunication
 
             ExtrusionRatio = 1;
             FeedRateRatio = 1;
+			waitingForPosition = false;
 
             LinesToWriteQueue.Clear();
             ClearQueuedGCode();
@@ -2477,7 +2489,7 @@ namespace MatterHackers.MatterControl.PrinterCommunication
         string lastLineRead = "";
         public void ReadFromPrinter()
         {
-            Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
+			Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
             timeSinceLastReadAnything.Restart();
             // we want this while loop to be as fast as possible. Don't allow any significant work to happen in here
             while (CommunicationState == CommunicationStates.AttemptingToConnect
@@ -2487,7 +2499,7 @@ namespace MatterHackers.MatterControl.PrinterCommunication
                     && PrinterIsConnected
                     && CommunicationState != CommunicationStates.PrintingFromSd)
                 {
-                    TryWriteNextLineFromGCodeFile();
+					TryWriteNextLineFromGCodeFile();
                 }
 
                 try

StaticData/PrinterSettings/Lulzbot/TAZ Mini MH/config.ini

@@ -0,0 +1,151 @@
+avoid_crossing_perimeters = 1
+bed_shape = rectangular
+bed_size = 158,158
+bed_temperature = 65
+bottom_clip_amount = 0
+bottom_solid_layers = 4
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 20
+brim_width = 0
+build_height = 150
+cancel_gcode = 
+center_part_on_bed = 1
+complete_objects = 0
+cool_extruder_lift = 0
+cooling = 0
+create_raft = 1
+default_acceleration = 0
+disable_fan_first_layers = 2
+end_gcode = M104 S0 ; turn off temperature\nG1 X20Y155 F3000\nG28 Z0\nM84     ; disable motors
+external_perimeter_speed = 50
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_count = 1
+extruder_offset = 0x0
+extruders_share_temperature = 0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 30%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 65
+first_layer_extrusion_width = 0
+first_layer_height = 0.25
+first_layer_speed = 15
+first_layer_temperature = 185
+g0 = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+gcode_output_type = REPRAP
+has_fan = 1
+has_heated_bed = 1
+has_sd_card_reader = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap_perimeter = .06
+infill_speed = 60
+infill_type = TRIANGLES
+layer_gcode = 
+layer_height = 0.2
+max_fan_speed = 100
+min_extrusion_before_retract = .1
+min_fan_speed = 100
+min_print_speed = 10
+min_skirt_length = 5
+notes = 
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+pause_gcode = 
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+print_center = 79,79
+raft_air_gap = 0.22
+raft_extruder = 0
+raft_extra_distance_around_part = 5
+raft_fan_speed_percent = 100
+raft_layers = 0
+raft_print_speed = 100%
+randomize_start = 1
+repair_outlines_extensive_stitching = 0
+repair_outlines_keep_open = 0
+resolution = 0
+resume_gcode = 
+retract_before_travel = 20
+retract_layer_change = 1
+retract_length = 3
+retract_length_tool_change = 10
+retract_lift = 0.2
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+skirt_distance = 3
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 35
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = M140 S[bed_temperature] ; start heating the bed\nG28 ; home all axes\nM190 S[bed_temperature] ; wait for bed to heat\nM104 S[temperature] ; start heating extruder\nG1 X79Y20Z5 F5000 ; move close to bed\n
+start_perimeters_at_concave_points = 0
+start_perimeters_at_non_overhang = 0
+support_material = 0
+support_material_angle = 0
+support_material_create_internal_support = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_infill_angle = 45
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 60
+support_material_threshold = 30
+support_material_xy_distance = 0.7
+support_material_z_distance = 0.15
+support_material_z_gap_layers = 1
+support_type = LINES
+temperature = 185
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 90
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+wipe_shield_distance = 0
+wipe_tower_size = 0
+z_can_be_negative = 1
+z_offset = 0

StaticData/PrinterSettings/Lulzbot/TAZ Mini MH/setup.ini

@@ -0,0 +1,5 @@
+baud_rate = 115200
+default_material_presets = PLA
+windows_driver = MHSerial.inf
+default_movement_speeds = x,3000,y,3000,z,500,e0,150
+needs_print_leveling = true