nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Added final changes from me3d

Browse source
This commit is contained in:
gregory-diaz 2016-03-11 15:11:33 -08:00
parent 3b8ee5d18b
commit a66f1baa3d
1 changed files with 5 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

10
StaticData/PrinterSettings/Me3D/Me2/config.ini
View file

@ -10,7 +10,7 @@ bridge_flow_ratio = 1
bridge_speed = 50
brim_width = 0
build_height = 180
cancel_gcode = G91; Set to Relative position\nG1 Z3 E-3; move z axis up\nG28; home axis\nG92 E0; zero the extruded length\nG1 F250 E-16; Retract filament from barrel\nG92 E0; zero the extruded length again\nG90; Set to Absolute position\nM104 S0; turn off temperature\nM140 S0; turn off heated bed\nM106 S0; Turn off fan\nM18;\nM117 Print cancelled
cancel_gcode = G91; Set to Relative position\nG1 Z3 E-3; move z axis up\nG28; home axis\nG1 F250 E-16; Retract filament from barrel\nG90; Set to Absolute position\nM104 S0; turn off temperature\nM140 S0; turn off heated bed\nM106 S0; Turn off fan\nM18;\nM117 Print cancelled
center_part_on_bed = 1
complete_objects = 0
connect_gcode =
@ -23,7 +23,7 @@ cooling = 1
create_raft = 0
default_acceleration = 0
disable_fan_first_layers = 1
end_gcode = G91; Set to Relative position\nG1 Z3 E-3; move z axis up\nG28 ; home axis\nG92 E0; zero the extruded length\nG1 F250 E-16; Retract filament from barrel\nG92 E0; zero the extruded length again\nG90; Set to Absolute position\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heated bed\nM106 S0 ; Turn off fan\nM18;\nM117 All Done!!!
end_gcode = G91; Set to Relative position\nG1 Z3 E-3; move z axis up\nG28 ; home axis\nG1 F250 E-16; Retract filament from barrel\nG90; Set to Absolute position\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heated bed\nM106 S0 ; Turn off fan\nM18;\nM117 All Done!!!
external_perimeter_speed = 80%
external_perimeters_first = 0
extra_perimeters = 1
@ -84,7 +84,7 @@ only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
pause_gcode = G91;\nG1 F250 Z10 X10 E-16; Retract filament from barrel\nG90;\nM104 S0; // set to holding temp\nM117 Print paused
pause_gcode = G91;\nG1 F250 Z10 X10 E-16; Retract filament from barrel\nG90;\nM104 S0; set to holding temp\nM117 Print paused
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
@ -104,7 +104,7 @@ randomize_start = 0
repair_outlines_extensive_stitching = 1
repair_outlines_keep_open = 1
resolution = 0
resume_gcode = M117 Print resumed\nM109 S[temperature]; // Set print temperature \nG91;\nG1 F250 Z-10 X-10 E16; Prime filament filament from barrel\nG90;
resume_gcode = M117 Print resumed\nM109 S[temperature]; Set print temperature \nG91;\nG1 F250 Z-10 X-10 E16; Prime filament from barrel\nG90;
retract_before_travel = 0.8
retract_layer_change = 0
retract_length = 2.5
@ -127,7 +127,7 @@ solid_infill_speed = 60
solid_shell = 0
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = ;Me3D - MC1.5 startup sequence - Me2 (G5,G6,G7) Build 07/15\n;Remove the ";" to activate any line\n;MAKE SURE YOU KNOW WHAT EACH LINE DOES BEFORE YOU CHANGE IT!!! The Me2 is 100% hackable and so has limited physical protection from errors in the g-code\nM104 S[first_layer_temperature] ; // Start heater and continue g-code\nG21 ; // set units to millimeters\nM201 X5000 Y5000; // max accel print\nM202 X5000 Y5000; // max accel travel\nM205 X15; // max xyjerk mm/s\nG91; // Relative position\nG1 Z10; // clear bed \nG90 ; // ABS position\nG28; // home axes\nG29; // perform auto levelling at three corners\nM82 ; // use absolute distances for extrusion\nG1 Z15 F4000; // Raise Z axis clear\nG1 X-5 F4000; // Move to X axis zero\nG1 Y5 F4000;\nG92 E0; // zero the extruded length\nM109 S[first_layer_temperature]; // Set print temperature and wait\nG1 F100 E19; // extrude feed stock to prime hotend barrel and purge\n; //Create purge line\nG1 Z[z_offset] F1000; // z_offset variable only available in 1.2.3 and above\nG91; // Relative motion \nG1 Z0.3;\nG1 X10 Y1 F1000; // Change this value to move the position of the line on the bed\nG1 X120 E20;\nG1 Y1;\nG1 X-100 E16.5;\nG1 X-20 E2;\nG1 X10 Y-3 F500;\nG1 Y5 F4000;\nG92 E0;\nG90;\nG92 E0; // zero the extruded length again\nM117 OK...let's print;
start_gcode = ;Me3D - MC1.5 startup sequence - Me2 (G5,G6,G7) Build 02/16\n;Remove the ";" to activate any line\n;MAKE SURE YOU KNOW WHAT EACH LINE DOES BEFORE YOU CHANGE IT!!! The Me2 is 100% hackable and so has limited physical protection from errors in the g-code\nM104 S[first_layer_temperature] ; Start heater and continue g-code\nG21 ; set units to millimeters\nM201 X5000 Y5000; max accel print\nM202 X5000 Y5000; max accel travel\nM205 X15; max xyjerk mm/s\nG92; Zero current head position\nG91; Relative position\nG1 Z10; clear bed \nG90 ; ABS position\nG28; home axes\nG29; perform auto levelling at three corners\nM82 ; use absolute distances for extrusion\nG1 Z15 F4000; Raise Z axis clear\nG1 X-5 F4000; Move to X axis zero\nG1 Y5 F4000;\nG92 E0; zero the extruded length\nM109 S[first_layer_temperature]; Set print temperature and wait\nG1 F100 E19; extrude feed stock to prime hotend barrel and purge\n; Create purge line\nG1 Z[z_offset] F1000; z_offset variable only available in MC1.2.3 and above\nG91; Relative motion \nG1 Z0.3;\nG1 X10 Y1 F1000; Change this value to move the position of the line on the bed\nG1 X120 E20;\nG1 Y1;\nG1 X-100 E16.5;\nG1 X-20 E2;\nG1 X10 Y-3 F500;\nG1 Y5 F4000;\nG92 E0;\nG90;\nG92 E0; zero the extruded length again\nM117 OK...let's print;
start_perimeters_at_concave_points = 0
start_perimeters_at_non_overhang = 0
support_air_gap = .3