nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

removed all curly brackets from start/end/resume/ gcode and replaced them with square brackets.

Browse source
This commit is contained in:
Gregory Diaz 2015-03-25 14:31:05 -07:00
parent cd1b4d3c4a
commit 95619c6e8e
7 changed files with 8 additions and 8 deletions
Download patch file Download diff file Expand all files Collapse all files

4
StaticData/PrinterSettings/Me3D/Me2/config.ini
View file

@ -90,7 +90,7 @@ randomize_start = 0
repair_outlines_extensive_stitching = 1
repair_outlines_keep_open = 1
resolution = 0
resume_gcode = ;M109 S{temperature}; // Set print temperature \nG91;\nG1 F250 Z-10 X-10 E16; Prime filament filament from barrel\nG90;
resume_gcode = ;M109 S[temperature]; // Set print temperature \nG91;\nG1 F250 Z-10 X-10 E16; Prime filament filament from barrel\nG90;
retract_before_travel = 2
retract_layer_change = 1
retract_length = 4
@ -111,7 +111,7 @@ solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = ;Me3D - startup sequence - Me2 (G5,G6,G7) Build 30/08/14\n;Remove the ";" to activate any line\n;MAKE SURE YOU KNOW WHAT EACH LINE DOES BEFORE YOU CHANGE IT!!! The Me2 is 100% hackable and so has limited physical protection from errors in the g-code\n;M501\n;M500\n;M190 S{print_bed_temperature} ; // Uncomment to add your own bed temperature line\nM104 S{temperature} ; // Start heater and continue g-code\nG21 ; // set units to millimeters\n;M92 E106.707 ; // Set E-Steps\n;M92 X80 ; // Set X Steps\n;M92 Y80 ; // Set Y Steps\n;M92 Z80 ; // Set Z Steps\nM201 X3000 Y3000; // max accel print\nM202 X3000 Y3000; // max accel travel\nM205 X15; // max xyjerk mm/s\nM208 X200 Y200 Z200; // set build size\n;M17 X Y Z; // Enable motors\nG91; // Relative position\nG1 Z10; // clear bed \nG90 ; // ABS position\nG28; // home axes\nG29; // perform auto levelling at three corners\nM82 ; // use absolute distances for extrusion\nG1 Z15 F4000; // Raise Z axis clear\nG1 X-5 F4000; // Move to X axis zero\nG1 Y0 F4000;\nG92 E0; // zero the extruded length\nM109 S{temperature}; // Set print temperature and wait\nG1 F50 E30; // extrude feed stock to prime hotend barrel and purge\nG92 E0; // zero the extruded length again\nM117 Awesome!!! // Put message on LCD screen
start_gcode = ;Me3D - startup sequence - Me2 (G5,G6,G7) Build 30/08/14\n;Remove the ";" to activate any line\n;MAKE SURE YOU KNOW WHAT EACH LINE DOES BEFORE YOU CHANGE IT!!! The Me2 is 100% hackable and so has limited physical protection from errors in the g-code\n;M501\n;M500\n;M190 S[print_bed_temperature] ; // Uncomment to add your own bed temperature line\nM104 S[temperature] ; // Start heater and continue g-code\nG21 ; // set units to millimeters\n;M92 E106.707 ; // Set E-Steps\n;M92 X80 ; // Set X Steps\n;M92 Y80 ; // Set Y Steps\n;M92 Z80 ; // Set Z Steps\nM201 X3000 Y3000; // max accel print\nM202 X3000 Y3000; // max accel travel\nM205 X15; // max xyjerk mm/s\nM208 X200 Y200 Z200; // set build size\n;M17 X Y Z; // Enable motors\nG91; // Relative position\nG1 Z10; // clear bed \nG90 ; // ABS position\nG28; // home axes\nG29; // perform auto levelling at three corners\nM82 ; // use absolute distances for extrusion\nG1 Z15 F4000; // Raise Z axis clear\nG1 X-5 F4000; // Move to X axis zero\nG1 Y0 F4000;\nG92 E0; // zero the extruded length\nM109 S[temperature]; // Set print temperature and wait\nG1 F50 E30; // extrude feed stock to prime hotend barrel and purge\nG92 E0; // zero the extruded length again\nM117 Awesome!!! // Put message on LCD screen
start_perimeters_at_concave_points = 0
start_perimeters_at_non_overhang = 0
support_material = 1