diff --git a/StaticData/PrinterSettings/RoBo 3D/RoBo 3D ABS/config.ini b/StaticData/PrinterSettings/RoBo 3D/RoBo 3D ABS/config.ini
deleted file mode 100644
index 9674f4be6..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/RoBo 3D ABS/config.ini	
+++ /dev/null
@@ -1,114 +0,0 @@
-avoid_crossing_perimeters = 0
-bed_size = 228,254
-bed_temperature = 90
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-build_height = 200
-complete_objects = 0
-cooling = 0
-default_acceleration = 0
-disable_fan_first_layers = 0
-duplicate = 1
-duplicate_distance = 6
-duplicate_grid =  1,1
-end_gcode =  M104 S0 ; turn off temperature\nG1 X10 Y200\nM84     ; disable motors
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset =  0x0
-extrusion_axis =  E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_diameter = 1.75
-fill_angle = 45
-fill_density = 0.3
-fill_pattern =  rectilinear
-first_layer_bed_temperature = 90
-first_layer_extrusion_width = 200%
-first_layer_height = 0.25
-first_layer_speed = 30%
-first_layer_temperature = 225
-g0 = 0
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor =  reprap
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_speed = 60
-layer_gcode =  
-layer_height = 0.2
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-min_skirt_length = 5
-notes =  
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 0
-output_filename_format =  [input_filename_base].gcode
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 60
-perimeters = 3
-post_process =  
-print_center =  114.3,127
-raft_layers = 0
-randomize_start = 1
-resolution = 0
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 10
-retract_lift = 1
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-rotate = 0
-scale = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 2
-slowdown_below_layer_time = 30
-small_perimeter_speed = 35
-solid_fill_pattern =  rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-start_gcode =  G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
-support_material = 1
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_pattern =  rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_threshold = 40
-temperature = 215
-threads = 2
-toolchange_gcode =  
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 150
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
diff --git a/StaticData/PrinterSettings/RoBo 3D/RoBo 3D ABS/setup.ini b/StaticData/PrinterSettings/RoBo 3D/RoBo 3D ABS/setup.ini
deleted file mode 100644
index d01929eb3..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/RoBo 3D ABS/setup.ini	
+++ /dev/null
@@ -1,2 +0,0 @@
-baud_rate = 250000
-windows_driver = CDM20824_Setup.exe
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Heated Bed/config.ini b/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/config.ini
similarity index 100%
rename from StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Heated Bed/config.ini
rename to StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/config.ini
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/material/ABS.slice b/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/material/ABS.slice
new file mode 100644
index 000000000..2a8650cd5
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/material/ABS.slice	
@@ -0,0 +1,7 @@
+bed_temperature = 90
+disable_fan_first_layers = 0
+fan_always_on = 0
+first_layer_bed_temperature = 90
+first_layer_temperature = 225
+retract_length = 1
+temperature = 215
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/material/PLA.slice b/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/material/PLA.slice
new file mode 100644
index 000000000..fc8fc8ec2
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/material/PLA.slice	
@@ -0,0 +1,7 @@
+bed_temperature = 55
+disable_fan_first_layers = 2
+fan_always_on = 1
+first_layer_bed_temperature = 60
+first_layer_temperature = 195
+retract_length = 3
+temperature = 185
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/setup.ini b/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/setup.ini
new file mode 100644
index 000000000..e267cbdd5
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/Robo 3D Heated Bed/setup.ini	
@@ -0,0 +1,3 @@
+baud_rate = 250000
+windows_driver = CDM20824_Setup.exe
+default_material_presets = PLA
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Heated Bed/setup.ini b/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Heated Bed/setup.ini
deleted file mode 100644
index d01929eb3..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Heated Bed/setup.ini	
+++ /dev/null
@@ -1,2 +0,0 @@
-baud_rate = 250000
-windows_driver = CDM20824_Setup.exe
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Unheated Bed/setup.ini b/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Unheated Bed/setup.ini
deleted file mode 100644
index d01929eb3..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Unheated Bed/setup.ini	
+++ /dev/null
@@ -1,2 +0,0 @@
-baud_rate = 250000
-windows_driver = CDM20824_Setup.exe
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Unheated Bed/config.ini b/StaticData/PrinterSettings/RoBo 3D/Robo 3D/config.ini
similarity index 100%
rename from StaticData/PrinterSettings/RoBo 3D/Robo 3D PLA - Unheated Bed/config.ini
rename to StaticData/PrinterSettings/RoBo 3D/Robo 3D/config.ini
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D/material/PLA.slice b/StaticData/PrinterSettings/RoBo 3D/Robo 3D/material/PLA.slice
new file mode 100644
index 000000000..c57cad650
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/Robo 3D/material/PLA.slice	
@@ -0,0 +1,7 @@
+bed_temperature = 0
+disable_fan_first_layers = 2
+fan_always_on = 1
+first_layer_bed_temperature = 0
+first_layer_temperature = 195
+retract_length = 3
+temperature = 185
diff --git a/StaticData/PrinterSettings/RoBo 3D/Robo 3D/setup.ini b/StaticData/PrinterSettings/RoBo 3D/Robo 3D/setup.ini
new file mode 100644
index 000000000..e267cbdd5
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/Robo 3D/setup.ini	
@@ -0,0 +1,3 @@
+baud_rate = 250000
+windows_driver = CDM20824_Setup.exe
+default_material_presets = PLA
\ No newline at end of file