Merge pull request #564 from gregory-diaz/1.5.1

1.5.1

StaticData/PrinterSettings/Maker's Tool Works/Fusematic/config.ini

@@ -3,6 +3,7 @@ bed_shape = rectangular
 bed_size = 200,225
 bed_temperature = 60
 bottom_clip_amount = 0
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 0.9
@@ -37,6 +38,7 @@ fill_density = 30%
 fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_bed_temperature = 130
+first_layer_extrusion_width = 0
 first_layer_height = 0.3
 first_layer_speed = 30%
 first_layer_temperature = 230
@@ -117,6 +119,7 @@ start_perimeters_at_concave_points = 0
 start_perimeters_at_non_overhang = 0
 support_material = 0
 support_material_angle = 0
+support_material_create_internal_support = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
@@ -147,4 +150,4 @@ wipe = 0
 wipe_shield_distance = 0
 wipe_tower_size = 0
 z_can_be_negative = 0
-z_offset = 0
+z_offset = 0

StaticData/PrinterSettings/Maker's Tool Works/MendelMax 2/config.ini

@@ -3,6 +3,7 @@ bed_shape = rectangular
 bed_size = 230,310
 bed_temperature = 60
 bottom_clip_amount = 0
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
@@ -37,6 +38,7 @@ fill_density = 30%
 fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_bed_temperature = 75
+first_layer_extrusion_width = 0
 first_layer_height = 0.3
 first_layer_speed = 30%
 first_layer_temperature = 205
@@ -68,7 +70,7 @@ min_fan_speed = 35
 min_print_speed = 10
 min_skirt_length = 0
 notes = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.4
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
@@ -117,6 +119,7 @@ start_perimeters_at_concave_points = 0
 start_perimeters_at_non_overhang = 0
 support_material = 0
 support_material_angle = 45
+support_material_create_internal_support = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
@@ -147,4 +150,4 @@ wipe = 0
 wipe_shield_distance = 0
 wipe_tower_size = 0
 z_can_be_negative = 0
-z_offset = 0
+z_offset = 0

StaticData/PrinterSettings/Maker's Tool Works/MendelMax 3 (Dual Extrusion)/config.ini

@@ -3,6 +3,7 @@ bed_shape = rectangular
 bed_size = 230,310
 bed_temperature = 60
 bottom_clip_amount = 0
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
@@ -37,6 +38,7 @@ fill_density = 30%
 fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_bed_temperature = 75
+first_layer_extrusion_width = 0
 first_layer_height = 0.3
 first_layer_speed = 30%
 first_layer_temperature = 205
@@ -68,7 +70,7 @@ min_fan_speed = 35
 min_print_speed = 10
 min_skirt_length = 0
 notes = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.4
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
@@ -117,6 +119,7 @@ start_perimeters_at_concave_points = 0
 start_perimeters_at_non_overhang = 0
 support_material = 0
 support_material_angle = 45
+support_material_create_internal_support = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
@@ -147,4 +150,4 @@ wipe = 0
 wipe_shield_distance = 0
 wipe_tower_size = 0
 z_can_be_negative = 0
-z_offset = 0
+z_offset = 0

StaticData/PrinterSettings/Maker's Tool Works/MendelMax 3/config.ini

@@ -3,6 +3,7 @@ bed_shape = rectangular
 bed_size = 230,310
 bed_temperature = 60
 bottom_clip_amount = 0
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
@@ -37,6 +38,7 @@ fill_density = 30%
 fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_bed_temperature = 75
+first_layer_extrusion_width = 0
 first_layer_height = 0.3
 first_layer_speed = 30%
 first_layer_temperature = 205
@@ -68,7 +70,7 @@ min_fan_speed = 35
 min_print_speed = 10
 min_skirt_length = 0
 notes = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.4
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
@@ -117,6 +119,7 @@ start_perimeters_at_concave_points = 0
 start_perimeters_at_non_overhang = 0
 support_material = 0
 support_material_angle = 45
+support_material_create_internal_support = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
@@ -147,4 +150,4 @@ wipe = 0
 wipe_shield_distance = 0
 wipe_tower_size = 0
 z_can_be_negative = 0
-z_offset = 0
+z_offset = 0

StaticData/PrinterSettings/Maker's Tool Works/MiniMax/config.ini

@@ -3,6 +3,7 @@ bed_shape = rectangular
 bed_size = 190,190
 bed_temperature = 65
 bottom_clip_amount = 0
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_fan_speed = 65
 bridge_flow_ratio = 1
@@ -37,6 +38,7 @@ fill_density = 30%
 fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_bed_temperature = 75
+first_layer_extrusion_width = 0
 first_layer_height = 0.3
 first_layer_speed = 30%
 first_layer_temperature = 205
@@ -117,6 +119,7 @@ start_perimeters_at_concave_points = 0
 start_perimeters_at_non_overhang = 0
 support_material = 0
 support_material_angle = 45
+support_material_create_internal_support = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
@@ -147,4 +150,4 @@ wipe = 0
 wipe_shield_distance = 0
 wipe_tower_size = 0
 z_can_be_negative = 0
-z_offset = 0
+z_offset = 0