Put in an HDL printer config

StaticData/PrinterSettings/Airwolf 3D/HDL/calibration.ini

@@ -0,0 +1 @@
+Calibration - Circle.stl

StaticData/PrinterSettings/Airwolf 3D/HDL/config.ini

@@ -0,0 +1,126 @@
+avoid_crossing_perimeters = 0
+bed_shape = rectangular
+bed_size = 300,200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 0
+bridge_flow_ratio = 1
+bridge_speed = 20
+brim_width = 0
+build_height = 300
+complete_objects = 0
+cool_extruder_lift = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 2
+end_gcode = M104 S0 ; turn off temperature\nM140 S0\nG28 X0 Y0 ; home X/Y axis\nM84     ; disable motors
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 2.85
+fill_angle = 45
+fill_density = 0.35
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = .42
+first_layer_speed = 15
+first_layer_temperature = 240
+g0 = 0
+gap_fill_speed = 30
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+has_fan = 1
+has_heated_bed = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 30
+layer_gcode = 
+layer_height = 0.21
+min_extrusion_before_retract = .1
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 2
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 1
+post_process = 
+print_center = 150,100
+raft_layers = 0
+randomize_start = 1
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 7
+retract_length_tool_change = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+skirt_distance = 2
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 15
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 1
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nM117 HD Printing...
+start_perimeters_at_concave_points = 0
+start_perimeters_at_non_overhang = 0
+support_material = 0
+support_material_angle = 0
+support_material_create_internal_support = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 30
+support_material_threshold = 75
+support_material_xy_distance = 0.7
+support_material_z_distance = 0.15
+temperature = 240
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 30
+top_solid_layers = 4
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

StaticData/PrinterSettings/Airwolf 3D/HDL/material/BENDLAY.slice

@@ -0,0 +1,2 @@
+first_layer_bed_temperature = 80
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/LAYBRICK.slice

@@ -0,0 +1,8 @@
+temperature = 200
+slowdown_below_layer_time = 1
+min_fan_speed = 100
+max_fan_speed = 100
+first_layer_temperature = 200
+fan_always_on = 1
+disable_fan_first_layers = 1
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/LAYWOOD.slice

@@ -0,0 +1,8 @@
+temperature = 200
+slowdown_below_layer_time = 1
+min_fan_speed = 100
+max_fan_speed = 100
+first_layer_temperature = 200
+fan_always_on = 1
+disable_fan_first_layers = 1
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/PLA 4043D.slice

@@ -0,0 +1,9 @@
+temperature = 210
+support_material_z_distance = 0.27
+slowdown_below_layer_time = 1
+min_fan_speed = 100
+max_fan_speed = 100
+first_layer_temperature = 210
+fan_always_on = 1
+disable_fan_first_layers = 0
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/PLA.slice

@@ -0,0 +1,9 @@
+temperature = 220
+support_material_z_distance = 0.27
+slowdown_below_layer_time = 1
+min_fan_speed = 100
+max_fan_speed = 100
+first_layer_temperature = 220
+fan_always_on = 1
+disable_fan_first_layers = 0
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/PVA.slice

@@ -0,0 +1,3 @@
+temperature = 195
+first_layer_temperature = 200
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/SOFT PLA.slice

@@ -0,0 +1,14 @@
+travel_speed = 150
+temperature = 225
+support_material_z_distance = 0.27
+slowdown_below_layer_time = 1
+perimeter_speed = 25
+min_fan_speed = 100
+max_fan_speed = 100
+infill_speed = 25
+first_layer_temperature = 225
+first_layer_speed = 10
+filament_diameter = 2.7
+fan_always_on = 1
+disable_fan_first_layers = 0
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/T-GLASE.slice

@@ -0,0 +1,9 @@
+temperature = 250
+perimeter_speed = 20
+layer_height = 0.3
+infill_speed = 20
+first_layer_temperature = 250
+first_layer_speed = 10
+fill_density = 0.25
+filament_diameter = 3.3
+bridge_fan_speed = 100

StaticData/PrinterSettings/Airwolf 3D/HDL/material/TPE.slice

@@ -0,0 +1,18 @@
+travel_speed = 150
+temperature = 235
+start_perimeters_at_non_overhang = 1
+start_perimeters_at_concave_points = 1
+slowdown_below_layer_time = 25
+skirts = 5
+retract_length = 9
+retract_before_travel = 1
+perimeter_speed = 20
+min_print_speed = 1
+infill_speed = 20
+first_layer_temperature = 245
+first_layer_speed = 10
+fill_density = 0.25
+filament_diameter = 2.6
+disable_fan_first_layers = 1
+bridge_fan_speed = 100
+avoid_crossing_perimeters = 1

StaticData/PrinterSettings/Airwolf 3D/HDL/setup.ini

@@ -0,0 +1,4 @@
+baud_rate = 250000
+default_material_presets = PLA
+default_quality_preset = Balanced
+default_macros = Lights On, Lights Off