More bad printers
This commit is contained in:
Lars Brubaker
parent
21f8f6e4fd
commit
68960bf22e
2 changed files with 0 additions and 539 deletions
|
|
@ -1,288 +0,0 @@
|
|||
{
|
||||
"DocumentVersion": 201606271,
|
||||
"ID": "Other-6037121741094912",
|
||||
"StagedUserSettings": {
|
||||
"z_offset": "0.8",
|
||||
"build_height": "250",
|
||||
"print_center": "110,110",
|
||||
"bed_size": "220,220",
|
||||
"retract_speed": "25",
|
||||
"bed_temperature": "70",
|
||||
"temperature": "230",
|
||||
"filament_cost": "0",
|
||||
"has_hardware_leveling": "1",
|
||||
"has_sd_card_reader": "1",
|
||||
"has_z_probe": "1",
|
||||
"validate_layer_height": "0",
|
||||
"end_gcode": "M104 S0 ; turn off temperature\\nM140 S0 ; turn off heated bed\\nG28 X0 ; home X axis\\nM84 ; disable motors",
|
||||
"fill_density": "30%"
|
||||
},
|
||||
"Macros": [],
|
||||
"OemLayer": {
|
||||
"avoid_crossing_perimeters": "1",
|
||||
"bed_remove_part_temperature": "0",
|
||||
"bed_shape": "rectangular",
|
||||
"bed_size": "200,200",
|
||||
"bed_temperature": "70",
|
||||
"bottom_clip_amount": "0",
|
||||
"bridge_acceleration": "0",
|
||||
"bridge_fan_speed": "100",
|
||||
"bridge_flow_ratio": "1",
|
||||
"bridge_speed": "20",
|
||||
"brim_width": "0",
|
||||
"build_height": "0",
|
||||
"cancel_gcode": "",
|
||||
"center_part_on_bed": "1",
|
||||
"complete_objects": "0",
|
||||
"connect_gcode": "",
|
||||
"cool_extruder_lift": "0",
|
||||
"cooling": "1",
|
||||
"create_raft": "0",
|
||||
"default_acceleration": "0",
|
||||
"disable_fan_first_layers": "1",
|
||||
"end_gcode": "M104 S0 ; turn off temperature\\nG28 X0 ; home X axis\\nM84 ; disable motors",
|
||||
"external_perimeter_extrusion_width": "100%",
|
||||
"external_perimeter_speed": "70%",
|
||||
"external_perimeters_first": "0",
|
||||
"extra_perimeters": "1",
|
||||
"extruder_clearance_height": "20",
|
||||
"extruder_clearance_radius": "20",
|
||||
"extruder_count": "1",
|
||||
"extruder_offset": "0x0,0x0,0x0,0x0",
|
||||
"extruder_wipe_temperature": "0",
|
||||
"extruders_share_temperature": "0",
|
||||
"extrusion_axis": "E",
|
||||
"extrusion_multiplier": "1",
|
||||
"extrusion_width": "0",
|
||||
"fan_always_on": "0",
|
||||
"fan_below_layer_time": "60",
|
||||
"filament_diameter": "3",
|
||||
"fill_angle": "45",
|
||||
"fill_density": "0.4",
|
||||
"fill_pattern": "honeycomb",
|
||||
"first_layer_acceleration": "0",
|
||||
"first_layer_bed_temperature": "75",
|
||||
"first_layer_height": "0.3",
|
||||
"first_layer_speed": "30%",
|
||||
"first_layer_temperature": "205",
|
||||
"g0": "0",
|
||||
"gap_fill_speed": "20",
|
||||
"gcode_arcs": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_flavor": "reprap",
|
||||
"gcode_output_type": "REPRAP",
|
||||
"has_fan": "1",
|
||||
"has_hardware_leveling": "0",
|
||||
"has_heated_bed": "1",
|
||||
"has_power_control": "0",
|
||||
"has_sd_card_reader": "0",
|
||||
"heat_extruder_before_homing": "0",
|
||||
"infill_acceleration": "0",
|
||||
"infill_every_layers": "1",
|
||||
"infill_extruder": "1",
|
||||
"infill_extrusion_width": "0",
|
||||
"infill_first": "0",
|
||||
"infill_only_where_needed": "0",
|
||||
"infill_overlap_perimeter": ".06",
|
||||
"infill_speed": "50",
|
||||
"infill_type": "TRIANGLES",
|
||||
"layer_height": "0.4",
|
||||
"manual_probe_paper_width": ".1",
|
||||
"max_fan_speed": "100",
|
||||
"min_extrusion_before_retract": ".1",
|
||||
"min_fan_speed": "35",
|
||||
"min_print_speed": "10",
|
||||
"min_skirt_length": "0",
|
||||
"notes": "",
|
||||
"nozzle_diameter": "0.5",
|
||||
"only_retract_when_crossing_perimeters": "1",
|
||||
"ooze_prevention": "0",
|
||||
"output_filename_format": "[input_filename_base].gcode",
|
||||
"overhangs": "1",
|
||||
"pause_gcode": "",
|
||||
"perimeter_acceleration": "0",
|
||||
"perimeter_extruder": "1",
|
||||
"perimeter_extrusion_width": "0",
|
||||
"perimeter_speed": "30",
|
||||
"perimeters": "3",
|
||||
"post_process": "",
|
||||
"print_center": "100,100",
|
||||
"print_leveling_method": "Manual",
|
||||
"print_leveling_required_to_print": "0",
|
||||
"print_leveling_solution": "3 Point Plane",
|
||||
"raft_air_gap": ".2",
|
||||
"raft_extra_distance_around_part": "5",
|
||||
"raft_extruder": "0",
|
||||
"raft_fan_speed_percent": "100",
|
||||
"raft_layers": "0",
|
||||
"raft_print_speed": "100%",
|
||||
"randomize_start": "0",
|
||||
"repair_outlines_extensive_stitching": "0",
|
||||
"repair_outlines_keep_open": "0",
|
||||
"resolution": "0",
|
||||
"resume_gcode": "",
|
||||
"retract_before_travel": "20",
|
||||
"retract_layer_change": "1",
|
||||
"retract_length": "4",
|
||||
"retract_length_tool_change": "10",
|
||||
"retract_lift": "0",
|
||||
"retract_restart_extra": "0",
|
||||
"retract_restart_extra_toolchange": "0",
|
||||
"retract_speed": "30",
|
||||
"show_reset_connection": "0",
|
||||
"skirt_distance": "6",
|
||||
"skirt_height": "1",
|
||||
"skirts": "1",
|
||||
"slowdown_below_layer_time": "30",
|
||||
"small_perimeter_speed": "30",
|
||||
"solid_fill_pattern": "rectilinear",
|
||||
"solid_infill_below_area": "70",
|
||||
"solid_infill_every_layers": "0",
|
||||
"solid_infill_extrusion_width": "0",
|
||||
"solid_infill_speed": "60",
|
||||
"solid_shell": "0",
|
||||
"spiral_vase": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"start_gcode": "G28 ; home all axes\\nG1 Z5 F5000 ; lift nozzle",
|
||||
"start_perimeters_at_concave_points": "0",
|
||||
"start_perimeters_at_non_overhang": "0",
|
||||
"support_material": "0",
|
||||
"support_material_angle": "45",
|
||||
"support_material_enforce_layers": "0",
|
||||
"support_material_extruder": "1",
|
||||
"support_material_extrusion_width": "0",
|
||||
"support_material_infill_angle": "45",
|
||||
"support_material_interface_extruder": "1",
|
||||
"support_material_interface_layers": ".9mm",
|
||||
"support_material_interface_spacing": "0",
|
||||
"support_material_pattern": "honeycomb",
|
||||
"support_material_spacing": "2.5",
|
||||
"support_material_speed": "60",
|
||||
"support_material_threshold": "0",
|
||||
"support_material_xy_distance": "0.7",
|
||||
"support_material_z_distance": "0.15",
|
||||
"support_material_z_gap_layers": ".3mm",
|
||||
"support_type": "LINES",
|
||||
"temperature": "200",
|
||||
"thin_walls": "1",
|
||||
"threads": "2",
|
||||
"toolchange_gcode": "",
|
||||
"top_infill_extrusion_width": "0",
|
||||
"top_solid_infill_speed": "30",
|
||||
"top_solid_layers": "1mm",
|
||||
"travel_speed": "175",
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "0",
|
||||
"vibration_limit": "0",
|
||||
"wipe": "0",
|
||||
"wipe_shield_distance": "0",
|
||||
"wipe_tower_size": "0",
|
||||
"z_can_be_negative": "0",
|
||||
"z_offset": "0",
|
||||
"make": "DMS",
|
||||
"model": "DP5",
|
||||
"created_date": "2017-10-17T20:38:32.227Z",
|
||||
"baud_rate": "250000",
|
||||
"default_material_presets": "PLA",
|
||||
"windows_driver": "MHSerial.inf",
|
||||
"calibration_files": "Calibration - Circle.stl",
|
||||
"active_theme_name": "Blue - Light",
|
||||
"active_quality_key": "4e925b0c-0601-4bde-bc38-09aa34974cc1"
|
||||
},
|
||||
"ActiveQualityKey": "4e925b0c-0601-4bde-bc38-09aa34974cc1",
|
||||
"MaterialSettingsKeys": [
|
||||
"95d36dca-5224-43db-b5a6-36e140e31c6b"
|
||||
],
|
||||
"MaterialLayers": [
|
||||
{
|
||||
"layer_name": "PLA",
|
||||
"layer_id": "95d36dca-5224-43db-b5a6-36e140e31c6b",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_cost": "42",
|
||||
"temperature": "190",
|
||||
"bed_temperature": "45",
|
||||
"retract_length": "4.5",
|
||||
"retract_speed": "40",
|
||||
"retract_lift": "2.5",
|
||||
"retract_before_travel": "10",
|
||||
"disable_fan_first_layers": "2",
|
||||
"layer_height": "0.2",
|
||||
"z_offset": "0.8",
|
||||
"bed_size": "220,220",
|
||||
"print_center": "110,110",
|
||||
"build_height": "250",
|
||||
"has_hardware_leveling": "1",
|
||||
"has_sd_card_reader": "1",
|
||||
"has_z_probe": "1",
|
||||
"validate_layer_height": "0",
|
||||
"end_gcode": "M104 S0 ; turn off temperature\\nM140 S0 ; turn off heated bed\\nG28 X0 ; home X axis\\nM84 ; disable motors",
|
||||
"nozzle_diameter": "0.4",
|
||||
"fill_density": "30%",
|
||||
"infill_overlap_perimeter": "0.1",
|
||||
"skirts": "5",
|
||||
"skirt_distance": "5",
|
||||
"min_skirt_length": "5"
|
||||
},
|
||||
{
|
||||
"layer_name": "PETG",
|
||||
"layer_id": "07461a73-4f94-4dc4-839f-161c73903df1",
|
||||
"layer_height": "0.2",
|
||||
"first_layer_height": "0.4",
|
||||
"fill_density": "10%",
|
||||
"infill_type": "HEXAGON",
|
||||
"infill_overlap_perimeter": "0.2",
|
||||
"infill_speed": "50",
|
||||
"top_solid_infill_speed": "30",
|
||||
"support_material_speed": "50",
|
||||
"travel_speed": "175",
|
||||
"skirts": "5",
|
||||
"skirt_distance": "5",
|
||||
"min_skirt_length": "5",
|
||||
"filament_density": "1.27",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_cost": "42",
|
||||
"temperature": "235",
|
||||
"retract_length": "4",
|
||||
"retract_lift": "2.5",
|
||||
"disable_fan_first_layers": "2",
|
||||
"bed_size": "220,220",
|
||||
"print_center": "110,110",
|
||||
"build_height": "250",
|
||||
"z_offset": "0.8",
|
||||
"include_firmware_updater": "Simple Arduino",
|
||||
"has_hardware_leveling": "1",
|
||||
"has_sd_card_reader": "1",
|
||||
"has_z_probe": "1",
|
||||
"end_gcode": "M104 S0 ; turn off temperature\\nM140 S0 ; turn off bed heater\\nG28 X0 ; home X axis\\nM84 ; disable motors",
|
||||
"nozzle_diameter": "0.4"
|
||||
}
|
||||
],
|
||||
"QualityLayers": [
|
||||
{
|
||||
"layer_name": "PLA 1",
|
||||
"layer_id": "4e925b0c-0601-4bde-bc38-09aa34974cc1",
|
||||
"fill_density": "30%",
|
||||
"infill_overlap_perimeter": "0.1",
|
||||
"skirts": "5",
|
||||
"skirt_distance": "5",
|
||||
"min_skirt_length": "5",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_cost": "42",
|
||||
"temperature": "190",
|
||||
"bed_temperature": "45",
|
||||
"retract_length": "4.5",
|
||||
"retract_speed": "40",
|
||||
"retract_lift": "2.5",
|
||||
"retract_before_travel": "10",
|
||||
"bed_size": "220,220",
|
||||
"print_center": "110,110",
|
||||
"build_height": "250",
|
||||
"z_offset": "0.8",
|
||||
"has_hardware_leveling": "1",
|
||||
"has_sd_card_reader": "1",
|
||||
"has_z_probe": "1",
|
||||
"include_firmware_updater": "Simple Arduino",
|
||||
"end_gcode": "M104 S0 ; turn off temperature\\nM140 S0 ; turn off heated bed\\nG28 X0 ; home X axis\\nM84 ; disable motors"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
|
@ -1,251 +0,0 @@
|
|||
{
|
||||
"DocumentVersion": 201606271,
|
||||
"ID": "cac16105-e61c-408b-83e1-2fc4636f0d8a",
|
||||
"StagedUserSettings": {},
|
||||
"Macros": [],
|
||||
"OemLayer": {
|
||||
"avoid_crossing_perimeters": "0",
|
||||
"bed_remove_part_temperature": "0",
|
||||
"bed_shape": "rectangular",
|
||||
"bed_size": "251,284",
|
||||
"bed_temperature": "50",
|
||||
"bridge_acceleration": "0",
|
||||
"bridge_fan_speed": "100",
|
||||
"bridge_flow_ratio": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"build_height": "191",
|
||||
"cancel_gcode": "",
|
||||
"center_part_on_bed": "0",
|
||||
"complete_objects": "0",
|
||||
"connect_gcode": "",
|
||||
"cool_extruder_lift": "0",
|
||||
"cooling": "1",
|
||||
"create_raft": "1",
|
||||
"default_acceleration": "0",
|
||||
"disable_fan_first_layers": "1",
|
||||
"end_gcode": "M104 S0 ; turn off temperature\\nG28 X0 ; home X axis\\nG1 E-1 F1000 ; retract extruder to prevent final string\\n\\nT0\\nM104 S0 ; turn off extruder\\nT1\\nM104 S0 ; turn off extruder\\nM140 S0 ; turn off bed\\n\\nT0\\nG28 Y200 ; push Y axis\\n\\nM84 ; disable motors\\nM148; End Print\\n",
|
||||
"external_perimeter_extrusion_width": "100%",
|
||||
"external_perimeter_speed": "70%",
|
||||
"external_perimeters_first": "0",
|
||||
"extra_perimeters": "1",
|
||||
"extruder_clearance_height": "20",
|
||||
"extruder_clearance_radius": "20",
|
||||
"extruder_count": "2",
|
||||
"extruder_offset": "0x0,-2.5x0,0x0,0x0",
|
||||
"extruder_wipe_temperature": "0",
|
||||
"extruders_share_temperature": "0",
|
||||
"extrusion_axis": "E",
|
||||
"extrusion_multiplier": "1",
|
||||
"extrusion_width": "0",
|
||||
"fan_always_on": "0",
|
||||
"fan_below_layer_time": "60",
|
||||
"filament_diameter": "1.75",
|
||||
"fill_angle": "45",
|
||||
"fill_density": "30%",
|
||||
"fill_pattern": "honeycomb",
|
||||
"first_layer_acceleration": "0",
|
||||
"first_layer_bed_temperature": "75",
|
||||
"first_layer_height": "0.3",
|
||||
"first_layer_speed": "30%",
|
||||
"first_layer_temperature": "205",
|
||||
"g0": "0",
|
||||
"gap_fill_speed": "20",
|
||||
"gcode_arcs": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_flavor": "reprap",
|
||||
"gcode_output_type": "REPRAP",
|
||||
"has_fan": "0",
|
||||
"has_hardware_leveling": "0",
|
||||
"has_heated_bed": "1",
|
||||
"has_power_control": "0",
|
||||
"has_sd_card_reader": "0",
|
||||
"heat_extruder_before_homing": "0",
|
||||
"infill_acceleration": "0",
|
||||
"infill_every_layers": "1",
|
||||
"infill_extruder": "1",
|
||||
"infill_extrusion_width": "0",
|
||||
"infill_first": "0",
|
||||
"infill_only_where_needed": "0",
|
||||
"infill_overlap_perimeter": ".06",
|
||||
"infill_speed": "25",
|
||||
"infill_type": "TRIANGLES",
|
||||
"layer_height": "0.2",
|
||||
"manual_probe_paper_width": ".1",
|
||||
"max_fan_speed": "100",
|
||||
"min_extrusion_before_retract": ".1",
|
||||
"min_fan_speed": "35",
|
||||
"min_print_speed": "10",
|
||||
"min_skirt_length": "0",
|
||||
"notes": "",
|
||||
"nozzle_diameter": "0.5",
|
||||
"only_retract_when_crossing_perimeters": "1",
|
||||
"ooze_prevention": "0",
|
||||
"output_filename_format": "[input_filename_base].gcode",
|
||||
"overhangs": "1",
|
||||
"pause_gcode": "",
|
||||
"perimeter_acceleration": "0",
|
||||
"perimeter_extruder": "1",
|
||||
"perimeter_extrusion_width": "0",
|
||||
"perimeter_speed": "25",
|
||||
"perimeters": "3",
|
||||
"post_process": "",
|
||||
"print_center": "125,142",
|
||||
"print_leveling_method": "Manual",
|
||||
"print_leveling_required_to_print": "1",
|
||||
"print_leveling_solution": "3 Point Plane",
|
||||
"raft_air_gap": "0.4",
|
||||
"raft_extra_distance_around_part": "5",
|
||||
"raft_extruder": "0",
|
||||
"raft_fan_speed_percent": "100",
|
||||
"raft_layers": "0",
|
||||
"raft_print_speed": "100%",
|
||||
"randomize_start": "0",
|
||||
"repair_outlines_extensive_stitching": "0",
|
||||
"repair_outlines_keep_open": "0",
|
||||
"resolution": "0",
|
||||
"resume_gcode": "",
|
||||
"retract_before_travel": "20",
|
||||
"retract_layer_change": "1",
|
||||
"retract_length": "1",
|
||||
"retract_length_tool_change": "10",
|
||||
"retract_lift": "0",
|
||||
"retract_restart_extra": "1",
|
||||
"retract_restart_extra_toolchange": "0",
|
||||
"retract_speed": "30",
|
||||
"show_reset_connection": "1",
|
||||
"skirt_distance": "3",
|
||||
"skirt_height": "1",
|
||||
"skirts": "1",
|
||||
"slowdown_below_layer_time": "30",
|
||||
"small_perimeter_speed": "30",
|
||||
"solid_fill_pattern": "rectilinear",
|
||||
"solid_infill_below_area": "70",
|
||||
"solid_infill_every_layers": "0",
|
||||
"solid_infill_extrusion_width": "0",
|
||||
"solid_infill_speed": "60",
|
||||
"solid_shell": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"start_gcode": "G28 ; home all axes\\nG1 Z5 F5000 ; lift nozzle\\nM148; End Print\\nG1 Z5 F250 ; lift nozzle\\nG28 A ; home all axes\\nG1 Z5 F250 ; lift nozzle\\nM147; Start Print\\n",
|
||||
"start_perimeters_at_concave_points": "0",
|
||||
"start_perimeters_at_non_overhang": "0",
|
||||
"support_material": "1",
|
||||
"support_material_angle": "45",
|
||||
"support_material_enforce_layers": "0",
|
||||
"support_material_extruder": "2",
|
||||
"support_material_extrusion_width": "0",
|
||||
"support_material_infill_angle": "45",
|
||||
"support_material_interface_extruder": "2",
|
||||
"support_material_interface_layers": ".9mm",
|
||||
"support_material_interface_spacing": "0",
|
||||
"support_material_pattern": "honeycomb",
|
||||
"support_material_spacing": "2.5",
|
||||
"support_material_speed": "25",
|
||||
"support_material_threshold": "0",
|
||||
"support_material_xy_distance": "0.7",
|
||||
"support_material_z_distance": "0.15",
|
||||
"support_material_z_gap_layers": ".3mm",
|
||||
"support_type": "LINES",
|
||||
"temperature": "260",
|
||||
"thin_walls": "1",
|
||||
"threads": "2",
|
||||
"toolchange_gcode": "",
|
||||
"top_infill_extrusion_width": "0",
|
||||
"top_solid_infill_speed": "25",
|
||||
"top_solid_layers": "1mm",
|
||||
"travel_speed": "80",
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "0",
|
||||
"vibration_limit": "0",
|
||||
"wipe": "0",
|
||||
"wipe_shield_distance": "3",
|
||||
"wipe_tower_size": "10",
|
||||
"z_can_be_negative": "1",
|
||||
"z_offset": "0",
|
||||
"make": "ORD Solutions",
|
||||
"model": "RoVa3D Dual",
|
||||
"created_date": "2017-02-15T19:49:45.969Z",
|
||||
"baud_rate": "250000",
|
||||
"default_material_presets": "PLA",
|
||||
"windows_driver": "MHSerial.inf",
|
||||
"calibration_files": "Calibration - Circle.stl",
|
||||
"oem_profile_token": "ag9zfm1hdHRlcmNvbnRyb2xyQwsSCUFmZmlsaWF0ZRiAgKCq19StCgwLEgZEZXZpY2UYgICAgIDDlQoMCxINRGV2aWNlUHJvZmlsZRiAgICAgNeMCgw",
|
||||
"active_theme_name": "Blue - Light",
|
||||
"active_quality_key": "2f2e6b7f-2c6b-4881-8d3f-2d5f087a08bc",
|
||||
"enable_network_printing": "1",
|
||||
"enable_sailfish_communication": "1",
|
||||
"merge_overlapping_lines": "1",
|
||||
"fill_thin_gaps": "1",
|
||||
"support_material_percent": "50"
|
||||
},
|
||||
"ActiveQualityKey": "2f2e6b7f-2c6b-4881-8d3f-2d5f087a08bc",
|
||||
"MaterialSettingsKeys": [
|
||||
"86ca72b9-bd7a-4888-9ae1-bf732c0ebfc0",
|
||||
"2249ffc9-aa83-425a-a0df-f7789911b348"
|
||||
],
|
||||
"MaterialLayers": [
|
||||
{
|
||||
"layer_name": "PLA",
|
||||
"layer_id": "9ffd10b8-cd5b-488d-9e1a-32025c0c8f2f",
|
||||
"extruder_count": "2",
|
||||
"bed_size": "251,284",
|
||||
"print_center": "125,142",
|
||||
"build_height": "191",
|
||||
"z_offset": "2.1",
|
||||
"show_reset_connection": "1",
|
||||
"has_fan": "0",
|
||||
"support_material": "1",
|
||||
"filament_diameter": "1.75",
|
||||
"temperature": "220",
|
||||
"extruder_offset": "0x0,0x0,0x0,0x0"
|
||||
},
|
||||
{
|
||||
"layer_name": "PVA",
|
||||
"layer_id": "cd1b0a8e-e7a5-4f9f-a6d3-1c32409c24ca",
|
||||
"extruder_count": "2",
|
||||
"bed_size": "251,284",
|
||||
"print_center": "125,142",
|
||||
"build_height": "191",
|
||||
"z_offset": "2.1",
|
||||
"show_reset_connection": "1",
|
||||
"has_fan": "0",
|
||||
"support_material": "1",
|
||||
"filament_diameter": "1.75",
|
||||
"layer_etag": "",
|
||||
"layer_source": "",
|
||||
"temperature": "195"
|
||||
},
|
||||
{
|
||||
"layer_name": "PolySupport",
|
||||
"layer_id": "2249ffc9-aa83-425a-a0df-f7789911b348",
|
||||
"filament_diameter": "1.75",
|
||||
"temperature": "230",
|
||||
"extruder_count": "2"
|
||||
},
|
||||
{
|
||||
"layer_name": "PETG",
|
||||
"layer_id": "86ca72b9-bd7a-4888-9ae1-bf732c0ebfc0",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_density": "1.04",
|
||||
"temperature": "250",
|
||||
"extruder_count": "2"
|
||||
}
|
||||
],
|
||||
"QualityLayers": [
|
||||
{
|
||||
"layer_name": "Medium",
|
||||
"layer_id": "2f2e6b7f-2c6b-4881-8d3f-2d5f087a08bc",
|
||||
"layer_height": "0.2",
|
||||
"fill_density": "30%",
|
||||
"create_raft": "1",
|
||||
"skirt_distance": "3",
|
||||
"support_material": "1",
|
||||
"support_material_create_internal_support": "0",
|
||||
"support_material_extruder": "2",
|
||||
"support_material_interface_extruder": "2",
|
||||
"extruder_count": "2",
|
||||
"temperature": "220",
|
||||
"filament_diameter": "1.75"
|
||||
}
|
||||
]
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue