diff --git a/StaticData/OEMSettings/Settings.json b/StaticData/OEMSettings/Settings.json
index fc23feaa1..6fca9303a 100644
--- a/StaticData/OEMSettings/Settings.json
+++ b/StaticData/OEMSettings/Settings.json
@@ -19,7 +19,7 @@
     "Printrbot",
     "PrintSpace",
     "Revolution 3D Printers",
-    "RoBo 3D",
+    "ROBO 3D",
     "SeeMeCNC",
     "Solidoodle",
     "Type A Machines",
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/config.ini b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/config.ini
deleted file mode 100644
index 88fc2563e..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/config.ini	
+++ /dev/null
@@ -1,114 +0,0 @@
-avoid_crossing_perimeters = 1
-bed_size = 228,254
-bed_temperature = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-build_height = 200
-complete_objects = 0
-cooling = 0
-default_acceleration = 0
-disable_fan_first_layers = 2
-duplicate = 1
-duplicate_distance = 6
-duplicate_grid =  1,1
-end_gcode =  M104 S0 ; turn off temperature\nG1 X10 Y200\nM84     ; disable motors
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset =  0x0
-extrusion_axis =  E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_diameter = 1.75
-fill_angle = 45
-fill_density = 0.3
-fill_pattern =  rectilinear
-first_layer_bed_temperature = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.25
-first_layer_speed = 30%
-first_layer_temperature = 195
-g0 = 0
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor =  reprap
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_speed = 60
-layer_gcode =  
-layer_height = 0.2
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-min_skirt_length = 5
-notes =  
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 0
-output_filename_format =  [input_filename_base].gcode
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 60
-perimeters = 3
-post_process =  
-print_center =  114.3,127
-raft_layers = 0
-randomize_start = 1
-resolution = 0
-retract_before_travel = 20
-retract_layer_change = 1
-retract_length = 3
-retract_length_toolchange = 10
-retract_lift = 1
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-rotate = 0
-scale = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 2
-slowdown_below_layer_time = 30
-small_perimeter_speed = 35
-solid_fill_pattern =  rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-start_gcode =  G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
-support_material = 1
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_pattern =  rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_threshold = 40
-temperature = 185
-threads = 2
-toolchange_gcode =  
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 150
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/material/ABS.slice b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/material/ABS.slice
deleted file mode 100644
index acffd78b0..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/material/ABS.slice	
+++ /dev/null
@@ -1,8 +0,0 @@
-bed_temperature = 90
-disable_fan_first_layers = 0
-fan_always_on = 0
-first_layer_bed_temperature = 90
-first_layer_temperature = 225
-retract_length = 1
-temperature = 215
-retract_speed = 30
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/material/PLA.slice b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/material/PLA.slice
deleted file mode 100644
index 4b02bb749..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/material/PLA.slice	
+++ /dev/null
@@ -1,7 +0,0 @@
-bed_temperature = 55
-disable_fan_first_layers = 2
-fan_always_on = 1
-first_layer_bed_temperature = 60
-first_layer_temperature = 195
-retract_length = 3
-temperature = 185
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/quality/High.slice b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/quality/High.slice
deleted file mode 100644
index b841eb2db..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/quality/High.slice	
+++ /dev/null
@@ -1,4 +0,0 @@
-layer_height = 0.1
-first_layer_height = 0.3
-perimeters = 2
-fill_density = 0.25
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/setup.ini b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/setup.ini
deleted file mode 100644
index 0dc1566a1..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/setup.ini	
+++ /dev/null
@@ -1,3 +0,0 @@
-baud_rate = 250000
-windows_driver = MHSerial.inf
-default_material_presets = PLA
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/config.ini b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/config.ini
deleted file mode 100644
index 4544601a6..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/config.ini	
+++ /dev/null
@@ -1,114 +0,0 @@
-avoid_crossing_perimeters = 1
-bed_size = 228,254
-bed_temperature = 55
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-build_height = 200
-complete_objects = 0
-cooling = 0
-default_acceleration = 0
-disable_fan_first_layers = 2
-duplicate = 1
-duplicate_distance = 6
-duplicate_grid =  1,1
-end_gcode =  M104 S0 ; turn off temperature\nG1 X10 Y200\nM84     ; disable motors
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset =  0x0
-extrusion_axis =  E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_diameter = 1.75
-fill_angle = 45
-fill_density = 0.3
-fill_pattern =  rectilinear
-first_layer_bed_temperature = 60
-first_layer_extrusion_width = 200%
-first_layer_height = 0.25
-first_layer_speed = 30%
-first_layer_temperature = 195
-g0 = 0
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor =  reprap
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_speed = 60
-layer_gcode =  
-layer_height = 0.2
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-min_skirt_length = 5
-notes =  
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 0
-output_filename_format =  [input_filename_base].gcode
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 60
-perimeters = 3
-post_process =  
-print_center =  114.3,127
-raft_layers = 0
-randomize_start = 1
-resolution = 0
-retract_before_travel = 20
-retract_layer_change = 1
-retract_length = 3
-retract_length_toolchange = 10
-retract_lift = 1
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-rotate = 0
-scale = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 2
-slowdown_below_layer_time = 30
-small_perimeter_speed = 35
-solid_fill_pattern =  rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-start_gcode =  G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
-support_material = 1
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_pattern =  rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_threshold = 40
-temperature = 185
-threads = 2
-toolchange_gcode =  
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 150
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/material/PLA.slice b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/material/PLA.slice
deleted file mode 100644
index 4b02bb749..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/material/PLA.slice	
+++ /dev/null
@@ -1,7 +0,0 @@
-bed_temperature = 55
-disable_fan_first_layers = 2
-fan_always_on = 1
-first_layer_bed_temperature = 60
-first_layer_temperature = 195
-retract_length = 3
-temperature = 185
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/Low.slice b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/Low.slice
deleted file mode 100644
index 974f8e6cb..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/Low.slice	
+++ /dev/null
@@ -1,9 +0,0 @@
-layer_height = 0.3
-first_layer_height = 0.3
-bottom_clip_amount = 0
-perimeters = 2
-top_solid_layers = 3
-fill_density = 0.2
-fill_pattern = rectilinear
-solid_infill_below_area = 40
-infill_speed = 60
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/Medium.slice b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/Medium.slice
deleted file mode 100644
index 61de1dbe7..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/Medium.slice	
+++ /dev/null
@@ -1,4 +0,0 @@
-layer_height = 0.2
-first_layer_height = 0.3
-perimeters = 2
-fill_density = 0.25
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/setup.ini b/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/setup.ini
deleted file mode 100644
index 324ae49f7..000000000
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/setup.ini	
+++ /dev/null
@@ -1,4 +0,0 @@
-baud_rate = 250000
-windows_driver = MHSerial.inf
-default_material_presets = PLA
-default_quality_preset = Medium
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/R1/config.ini b/StaticData/PrinterSettings/RoBo 3D/R1/config.ini
index f728e00dc..4701a8c9e 100644
--- a/StaticData/PrinterSettings/RoBo 3D/R1/config.ini	
+++ b/StaticData/PrinterSettings/RoBo 3D/R1/config.ini	
@@ -3,7 +3,7 @@ bed_shape = rectangular
 bed_size = 228,254
 bed_temperature = 90
 bottom_clip_amount = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 1mm
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
@@ -134,7 +134,7 @@ threads = 2
 toolchange_gcode = 
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 50
-top_solid_layers = 3
+top_solid_layers = 1mm
 travel_speed = 150
 use_firmware_retraction = 0
 use_relative_e_distances = 0
diff --git a/StaticData/PrinterSettings/RoBo 3D/R1PLUS/BedImage.jpg b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/BedImage.jpg
new file mode 100644
index 000000000..6774bbc1a
Binary files /dev/null and b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/BedImage.jpg differ
diff --git a/StaticData/PrinterSettings/RoBo 3D/R1PLUS/BedSettings.json b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/BedSettings.json
new file mode 100644
index 000000000..7d3707abc
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/BedSettings.json	
@@ -0,0 +1 @@
+{"ActualBedInImage":{"Left":48,"Bottom":48,"Right":974,"Top":974}}
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/R1PLUS/config.ini b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/config.ini
new file mode 100644
index 000000000..9a15c674d
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/config.ini	
@@ -0,0 +1,144 @@
+avoid_crossing_perimeters = 1
+bed_shape = rectangular
+bed_size = 228,254
+bed_temperature = 90
+bottom_clip_amount = 0
+bottom_solid_layers = 1mm
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+build_height = 200
+cancel_gcode = G28 X0\n
+center_part_on_bed = 1
+complete_objects = 0
+cool_extruder_lift = 0
+cooling = 0
+create_raft = 0
+raft_extra_distance_around_part = 5
+raft_air_gap = .2
+default_acceleration = 0
+disable_fan_first_layers = 0
+end_gcode = M104 S0 ; turn off temperature\nG1 X10 Y200\nM84     ; disable motors
+external_perimeter_speed = 50
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.25
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 90
+first_layer_extrusion_width = 1
+first_layer_height = 0.4
+first_layer_speed = 30%
+first_layer_temperature = 225
+g0 = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+gcode_output_type = REPRAP
+has_sd_card_reader = 1
+has_hardware_leveling = 1
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap_perimeter = .06
+infill_speed = 60
+infill_type = GRID
+layer_gcode = 
+layer_height = 0.1
+min_extrusion_before_retract = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+min_skirt_length = 5
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+pause_gcode = 
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_center = 114,127
+raft_layers = 0
+randomize_start = 1
+repair_outlines_extensive_stitching = 0
+repair_outlines_keep_open = 0
+repair_overlaps_reverse_orientation = 0
+repair_overlaps_union_all_together = 0
+resolution = 0
+resume_gcode = 
+retract_before_travel = 20
+retract_layer_change = 1
+retract_length = 1
+retract_length_tool_change = 10
+retract_lift = .5
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+slowdown_below_layer_time = 10
+small_perimeter_speed = 35
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 X0 Y0 Z0 ; home all axes\nG1 Z5 F5000 ; lift nozzle\nM109 S[temperature] ; set the extruder temp and wait\nG28 X0 Y0 Z0 ; Home Z again in case there was filament on nozzle\nG29 ; probe the bed
+start_perimeters_at_concave_points = 0
+start_perimeters_at_non_overhang = 0
+support_material = 1
+support_material_angle = 0
+support_material_create_internal_support = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 60
+support_material_threshold = 40
+support_material_xy_distance = 0.7
+support_material_z_distance = 0.15
+support_material_z_gap_layers = 1
+support_type = LINES
+temperature = 215
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 1mm
+travel_speed = 150
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+wipe_shield_distance = 0
+z_offset = 0
diff --git a/StaticData/PrinterSettings/RoBo 3D/R1PLUS/material/ABS.slice b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/material/ABS.slice
new file mode 100644
index 000000000..e09ca5a68
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/material/ABS.slice	
@@ -0,0 +1,8 @@
+bed_temperature = 80
+disable_fan_first_layers = 0
+fan_always_on = 0
+first_layer_bed_temperature = 80
+first_layer_temperature = 235
+retract_length = 1
+temperature = 235
+retract_speed = 30
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/R1PLUS/material/PLA.slice b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/material/PLA.slice
new file mode 100644
index 000000000..0e6ff22ce
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/material/PLA.slice	
@@ -0,0 +1,7 @@
+bed_temperature = 50
+disable_fan_first_layers = 2
+fan_always_on = 1
+first_layer_bed_temperature = 55
+first_layer_temperature = 210
+retract_length = 3
+temperature = 210
\ No newline at end of file
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/High.slice b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/quality/High.slice
similarity index 59%
rename from StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/High.slice
rename to StaticData/PrinterSettings/RoBo 3D/R1PLUS/quality/High.slice
index b841eb2db..04301f9c0 100644
--- a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ONLY/quality/High.slice	
+++ b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/quality/High.slice	
@@ -1,4 +1,5 @@
 layer_height = 0.1
 first_layer_height = 0.3
 perimeters = 2
-fill_density = 0.25
\ No newline at end of file
+fill_density = 0.25
+top_solid_layers = 8
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/quality/Low.slice b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/quality/Low.slice
similarity index 100%
rename from StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/quality/Low.slice
rename to StaticData/PrinterSettings/RoBo 3D/R1PLUS/quality/Low.slice
diff --git a/StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/quality/Medium.slice b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/quality/Medium.slice
similarity index 100%
rename from StaticData/PrinterSettings/RoBo 3D/BETA PLA ABS/quality/Medium.slice
rename to StaticData/PrinterSettings/RoBo 3D/R1PLUS/quality/Medium.slice
diff --git a/StaticData/PrinterSettings/RoBo 3D/R1PLUS/setup.ini b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/setup.ini
new file mode 100644
index 000000000..5299299e2
--- /dev/null
+++ b/StaticData/PrinterSettings/RoBo 3D/R1PLUS/setup.ini	
@@ -0,0 +1,6 @@
+baud_rate = 250000
+windows_driver = MHSerial.inf
+default_material_presets = PLA
+default_quality_preset = Medium
+default_macros = Offset 0.8, Offset 0.9,Offset 1,Offset 1.1,Offset 1.2
+