Added TAZ 4 Printer Profiles

StaticData/PrinterSettings/Lulzbot/TAZ 4/config.ini

@@ -0,0 +1,122 @@
+avoid_crossing_perimeters  = 1
+bed_size  = 298275
+bed_temperature  = 0
+bottom_solid_layers  = 3
+bridge_acceleration  = 0
+bridge_fan_speed  = 0
+bridge_flow_ratio  = 1.01
+bridge_speed  = 40
+brim_width  = 0
+complete_objects  = 0
+cooling  = 1
+default_acceleration  = 0
+disable_fan_first_layers  = 1
+duplicate  = 1
+duplicate_distance  = 6
+duplicate_grid  =  1,1
+end_gcode  =  M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed\nM107 ; turn off Extruder Fans\nG28 X0 Y0  ; home X axis Y axis\nG1 Y250 ; kick out bed\nM84     ; disable motors
+external_perimeter_speed  = 80
+external_perimeters_first  = 0
+extra_perimeters  =  
+extruder_clearance_height  = 20
+extruder_clearance_radius  = 20
+extruder_offset  =  0x0
+extrusion_axis  =  E
+extrusion_multiplier  = 1
+extrusion_width  = 0.35
+fan_always_on  = 0
+fan_below_layer_time  = 60
+filament_diameter  = 2.89
+fill_angle  = 45
+fill_density  = 0.5
+fill_pattern  =  line
+first_layer_acceleration  = 0
+first_layer_bed_temperature  = 0
+first_layer_extrusion_width  = 0.5
+first_layer_height  = 0.3
+first_layer_speed  = 0.5
+first_layer_temperature  = 0
+g0  = 0
+gap_fill_speed  = 40
+gcode_arcs  = 0
+gcode_comments  = 0
+gcode_flavor  =  reprap
+infill_acceleration  = 0
+infill_every_layers  = 1
+infill_extruder  = 1
+infill_extrusion_width  = 0.5
+infill_first  = 0
+infill_only_where_needed  = 0
+infill_speed  = 115
+layer_gcode  =  
+layer_height  = 0.22
+max_fan_speed  = 0
+min_fan_speed  = 0
+min_print_speed  = 5
+min_skirt_length  = 0
+notes  =  
+nozzle_diameter  = 0.35
+only_retract_when_crossing_perimeters  =  
+ooze_prevention  = 0
+output_filename_format  =  [input_filename_base].gcode
+overhangs  = 1
+perimeter_acceleration  = 0
+perimeter_extruder  = 1
+perimeter_extrusion_width  = 0.33
+perimeter_speed  = 100
+perimeters  = 2
+post_process  =  
+print_center  = 149138
+raft_layers  = 0
+randomize_start  = 0
+resolution  = 0.01
+retract_before_travel  = 2
+retract_layer_change  = 1
+retract_length  = 2
+retract_length_toolchange  = 10
+retract_lift  = 0
+retract_restart_extra  = 0
+retract_restart_extra_toolchange  = 0
+retract_speed  = 25
+rotate  = 0
+scale  = 1
+skirt_distance  = 6
+skirt_height  = 1
+skirts  = 2
+slowdown_below_layer_time  = 23
+small_perimeter_speed  = 60
+solid_fill_pattern  =  rectilinear
+solid_infill_below_area  = 70
+solid_infill_every_layers  = 0
+solid_infill_extrusion_width  = 0.38
+solid_infill_speed  = 100
+spiral_vase  = 0
+standby_temperature_delta  = -5
+start_gcode  =  G28 ; home all axes\nM203 X192 Y208 Z3 ; Speed limits to minimize skipped steps when moving really fast courtesy of forum.lulzbot.com user 1013
+start_perimeters_at_concave_points  = 1
+start_perimeters_at_non_overhang  = 1
+support_material  =  
+support_material_angle  = 0
+support_material_enforce_layers  = 0
+support_material_extruder  = 1
+support_material_extrusion_width  = 0
+support_material_interface_extruder  = 1
+support_material_interface_layers  = 3
+support_material_interface_spacing  = 0
+support_material_pattern  =  honeycomb
+support_material_spacing  = 5
+support_material_speed  = 60
+support_material_threshold  = 0
+temperature  = 0
+thin_walls  = 1
+threads  = 2
+toolchange_gcode  =  
+top_infill_extrusion_width  = 0.22
+top_solid_infill_speed  = 70
+top_solid_layers  = 3
+travel_speed  = 180
+use_firmware_retraction  = 0
+use_relative_e_distances  = 0
+vibration_limit  = 0
+wipe  = 0
+z_offset  = 0

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/HIPS.slice

@@ -0,0 +1,18 @@
+bridge_acceleration = 1500
+bridge_flow_ratio = 1.3
+default_acceleration = 800
+external_perimeter_speed = 60
+extra_perimeters = 1
+fill_pattern =  rectilinear
+first_layer_acceleration = 200
+first_layer_speed = 0.2
+infill_acceleration = 1500
+infill_speed = 95
+only_retract_when_crossing_perimeters = 1
+perimeter_acceleration = 800
+perimeter_speed = 80
+small_perimeter_speed = 48
+solid_infill_speed = 80
+top_solid_infill_speed = 55
+
+

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/LAYBRICK.slice

@@ -0,0 +1,45 @@
+bed_size = 300300
+bridge_acceleration = 1000
+bridge_flow_ratio = 1.15
+bridge_speed = 25
+default_acceleration = 1500
+external_perimeter_speed = 20
+external_perimeters_first =  
+extra_perimeters = 1
+extrusion_width = 0.42
+fill_density = 0.4
+fill_pattern =  rectilinear
+first_layer_acceleration = 600
+first_layer_extrusion_width = 0.53
+first_layer_height = 1
+first_layer_speed = 0.75
+gap_fill_speed = 45
+infill_acceleration = 1800
+infill_extrusion_width = 0.68
+infill_speed = 56
+min_print_speed = 25
+only_retract_when_crossing_perimeters = 0
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.38
+perimeter_speed = 36
+print_center = 140140
+resolution = 0
+retract_length = 1.9
+retract_length_toolchange = 3
+retract_speed = 30
+skirts = 3
+slowdown_below_layer_time = 25
+small_perimeter_speed = 23
+solid_infill_below_area = 90
+solid_infill_extrusion_width = 0.5
+solid_infill_speed = 52
+support_material = 0
+support_material_interface_layers = 0
+support_material_pattern =  rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_threshold = 45
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_layers = 5
+travel_speed = 100

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/LAYWOOD.slice

@@ -0,0 +1,47 @@
+bed_size = 300300
+bridge_acceleration = 1000
+bridge_flow_ratio = 1.15
+bridge_speed = 25
+default_acceleration = 1500
+external_perimeter_speed = 20
+external_perimeters_first =  
+extra_perimeters = 1
+extrusion_width = 0.5
+fill_density = 0.4
+fill_pattern =  rectilinear
+first_layer_acceleration = 600
+first_layer_extrusion_width = 0.55
+first_layer_height = 1
+first_layer_speed = 0.75
+gap_fill_speed = 45
+infill_acceleration = 1800
+infill_extrusion_width = 0.68
+infill_speed = 56
+min_print_speed = 25
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 0
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.45
+perimeter_speed = 36
+print_center = 140140
+raft_layers = 3
+resolution = 0
+retract_length = 3.5
+retract_length_toolchange = 3
+retract_speed = 30
+skirts = 3
+slowdown_below_layer_time = 25
+small_perimeter_speed = 23
+solid_infill_below_area = 90
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 52
+support_material = 0
+support_material_extrusion_width = 0.6
+support_material_pattern =  rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_threshold = 45
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_layers = 5
+travel_speed = 100

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/NINJAFLEX.slice

@@ -0,0 +1,36 @@
+avoid_crossing_perimeters = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+external_perimeter_speed = 30
+extra_perimeters = 1
+extrusion_width = 0
+filament_diameter = 3
+fill_density = 0.35
+first_layer_extrusion_width = 1
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+infill_extrusion_width = 0
+infill_speed = 30
+layer_height = 0.4
+min_print_speed = 10
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+print_center = 149137.5
+resolution = 0
+retract_length = 3
+retract_speed = 20
+skirts = 3
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_extrusion_width = 0
+solid_infill_speed = 30
+support_material = 0
+support_material_spacing = 2.5
+support_material_speed = 30
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 30
+travel_speed = 200

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/NYLON615.slice

@@ -0,0 +1,49 @@
+bed_size = 300300
+bottom_solid_layers = 4
+bridge_acceleration = 800
+bridge_flow_ratio = 1.12
+bridge_speed = 30
+brim_width = 3
+default_acceleration = 800
+external_perimeter_speed = 0.75
+external_perimeters_first =  
+extra_perimeters = 1
+extrusion_width = 0.3
+fill_density = 0.85
+fill_pattern =  rectilinear
+first_layer_acceleration = 600
+first_layer_extrusion_width = 0.45
+first_layer_height = 1
+first_layer_speed = 0.3
+gap_fill_speed = 20
+infill_acceleration = 1500
+infill_extrusion_width = 0.42
+infill_speed = 40
+layer_height = 0.225
+min_print_speed = 25
+only_retract_when_crossing_perimeters = 0
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.325
+perimeter_speed = 35
+perimeters = 5
+print_center = 140140
+retract_length = 4.5
+retract_length_toolchange = 3
+skirts = 3
+slowdown_below_layer_time = 25
+small_perimeter_speed = 28
+solid_infill_below_area = 90
+solid_infill_extrusion_width = 0.35
+solid_infill_speed = 35
+support_material = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.15
+support_material_pattern =  rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_threshold = 45
+top_infill_extrusion_width = 0.3
+top_solid_infill_speed = 25
+top_solid_layers = 4
+travel_speed = 160
+

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/NYLON645.slice

@@ -0,0 +1,48 @@
+bed_size = 300300
+bottom_solid_layers = 4
+bridge_acceleration = 800
+bridge_flow_ratio = 1.12
+bridge_speed = 30
+brim_width = 3
+default_acceleration = 800
+external_perimeter_speed = 0.75
+external_perimeters_first =  
+extra_perimeters = 1
+extrusion_width = 0.3
+fill_density = 0.85
+fill_pattern =  rectilinear
+first_layer_acceleration = 600
+first_layer_extrusion_width = 0.45
+first_layer_height = 1
+first_layer_speed = 0.3
+gap_fill_speed = 20
+infill_acceleration = 1500
+infill_extrusion_width = 0.42
+infill_speed = 40
+layer_height = 0.225
+min_print_speed = 25
+only_retract_when_crossing_perimeters = 0
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.325
+perimeter_speed = 35
+perimeters = 5
+print_center = 140140
+retract_length = 4.5
+retract_length_toolchange = 3
+skirts = 3
+slowdown_below_layer_time = 25
+small_perimeter_speed = 28
+solid_infill_below_area = 90
+solid_infill_extrusion_width = 0.35
+solid_infill_speed = 35
+support_material = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.15
+support_material_pattern =  rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_threshold = 45
+top_infill_extrusion_width = 0.3
+top_solid_infill_speed = 25
+top_solid_layers = 4
+travel_speed = 160

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/NYLONBRIDGE.slice

@@ -0,0 +1,44 @@
+bed_size = 300300
+bottom_solid_layers = 2
+bridge_acceleration = 800
+bridge_flow_ratio = 1.3
+bridge_speed = 50
+brim_width = 3
+default_acceleration = 800
+external_perimeter_speed = 0.75
+external_perimeters_first =  
+extrusion_width = 0.42
+fill_density = 1
+fill_pattern =  rectilinear
+first_layer_acceleration = 600
+first_layer_extrusion_width = 0.53
+first_layer_height = 1
+first_layer_speed = 0.3
+infill_acceleration = 1500
+infill_extrusion_width = 0.68
+infill_speed = 100
+layer_height = 0.275
+min_print_speed = 25
+only_retract_when_crossing_perimeters = 0
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.38
+perimeter_speed = 50
+print_center = 140140
+resolution = 0
+retract_length = 1.9
+retract_length_toolchange = 3
+skirts = 3
+slowdown_below_layer_time = 25
+small_perimeter_speed = 65
+solid_infill_below_area = 90
+solid_infill_extrusion_width = 0.5
+solid_infill_speed = 75
+support_material = 0
+support_material_interface_layers = 0
+support_material_pattern =  rectilinear
+support_material_spacing = 2.5
+support_material_threshold = 45
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+travel_speed = 160
+

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/PLA.slice

@@ -0,0 +1,50 @@
+bed_size = 300300
+bridge_acceleration = 1000
+bridge_fan_speed = 100
+bridge_flow_ratio = 1.15
+bridge_speed = 25
+default_acceleration = 1500
+disable_fan_first_layers = 2
+external_perimeter_speed = 25
+external_perimeters_first =  
+extra_perimeters = 1
+extrusion_width = 0.42
+fan_always_on = 1
+fill_density = 0.4
+fill_pattern =  rectilinear
+first_layer_acceleration = 600
+first_layer_extrusion_width = 0.53
+first_layer_height = 1
+first_layer_speed = 0.75
+gap_fill_speed = 45
+infill_acceleration = 1800
+infill_extrusion_width = 0.68
+infill_speed = 70
+max_fan_speed = 90
+min_fan_speed = 35
+min_print_speed = 25
+only_retract_when_crossing_perimeters = 0
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.38
+perimeter_speed = 45
+print_center = 140140
+resolution = 0
+retract_length = 1.9
+retract_length_toolchange = 3
+retract_speed = 30
+skirts = 3
+slowdown_below_layer_time = 25
+small_perimeter_speed = 30
+solid_infill_below_area = 90
+solid_infill_extrusion_width = 0.5
+solid_infill_speed = 65
+support_material = 0
+support_material_interface_layers = 0
+support_material_pattern =  rectilinear
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 45
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 150

StaticData/PrinterSettings/Lulzbot/TAZ 4/material/T-GLASE.slice

@@ -0,0 +1,41 @@
+bed_size = 300300
+bridge_acceleration = 1500
+bridge_flow_ratio = 1.3
+bridge_speed = 45
+default_acceleration = 800
+external_perimeter_speed = 0.75
+external_perimeters_first =  
+extrusion_width = 0.42
+first_layer_acceleration = 600
+first_layer_extrusion_width = 0.53
+first_layer_height = 1
+first_layer_speed = 0.75
+gap_fill_speed = 30
+infill_acceleration = 1500
+infill_extrusion_width = 0.68
+infill_speed = 20
+layer_height = 0.325
+min_print_speed = 25
+only_retract_when_crossing_perimeters = 0
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.38
+perimeter_speed = 19
+print_center = 140140
+resolution = 0
+retract_length_toolchange = 3
+skirts = 3
+slowdown_below_layer_time = 25
+small_perimeter_speed = 12.5
+solid_infill_below_area = 90
+solid_infill_extrusion_width = 0.5
+solid_infill_speed = 18
+support_material = 0
+support_material_interface_layers = 0
+support_material_pattern =  rectilinear
+support_material_spacing = 2.5
+support_material_speed = 15
+support_material_threshold = 45
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 15
+travel_speed = 160
+

StaticData/PrinterSettings/Lulzbot/TAZ 4/setup.ini

@@ -0,0 +1,2 @@
+baud_rate = 115200
+default_material_presets = ABS