nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Printer file commit

Browse source
This commit is contained in:
Matt Moening 2016-07-19 13:01:20 -07:00
parent eb416594a7
commit 0b919be893
91 changed files with 23042 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

249
StaticData/Profiles/Ultimaker/2 Extended+.printer Normal file
View file

@ -0,0 +1,249 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "223,223",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "305",
"cancel_gcode": "G28",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F1300 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "2.85",
"fill_angle": "45",
"fill_density": "0.2",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "20",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "1",
"has_power_control": "0",
"has_sd_card_reader": "1",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.2",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.02",
"min_fan_speed": "100",
"min_print_speed": "10",
"min_skirt_length": "10",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "111,111",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": "0.22",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "1.5",
"retract_layer_change": "1",
"retract_length": "4.5",
"retract_length_tool_change": "16.5",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "40",
"show_reset_connection": "0",
"skirt_distance": "3",
"skirt_height": "1",
"skirts": "3",
"slowdown_below_layer_time": "25",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 X0 Y0 ;move X/Y to min endstops\\nG28 Z0 ;move Z to min endstops\\nM190 S[bed_temperature]\\nG1 Z15.0 F1800 ;move the platform down 15mm\\nG1 Y10 F4000\\nM109 S[temperature]\\nG92 E0 ;zero the extruded length\\nG1 F200 E30 ;extrude 30mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F130\\nM117 Printing... \t;Put printing message on LCD screen",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "0",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "30",
"support_material_threshold": "45",
"support_material_xy_distance": "1",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "1",
"support_type": "LINES",
"temperature": "210",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "0.8mm",
"travel_speed": "150",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "Ultimaker",
"model": "2 Extended+",
"created_date": "7/19/2016 7:57:19 PM",
"baud_rate": "250000",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "ABS",
"layer_id": "c82d3eaa-a8e8-4a22-ab12-5392af29c2f5",
"bed_temperature": "90",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "260"
},
{
"layer_name": "PET",
"layer_id": "95eeae7a-badb-4a95-aada-d629c2b407d6",
"bed_temperature": "60",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "250"
},
{
"layer_name": "PLA",
"layer_id": "cf4bc861-a361-47de-9c9b-8a1c8fec1c41",
"bed_temperature": "60",
"bridge_fan_speed": "100",
"extrusion_multiplier": "1",
"max_fan_speed": "100",
"min_fan_speed": "100",
"temperature": "210"
}
],
"QualityLayers": [
{
"layer_name": "Fast",
"layer_id": "2f173098-0b77-4bf0-af25-31320c349937",
"external_perimeter_speed": "40",
"fill_density": "0.1",
"first_layer_speed": "30",
"infill_speed": "100",
"layer_height": "0.15",
"perimeter_speed": "80"
},
{
"layer_name": "High",
"layer_id": "1be98173-d5be-49b2-bf0e-ec6455585674",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.06",
"perimeter_speed": "60"
},
{
"layer_name": "Normal",
"layer_id": "90897902-5d1b-44f1-bf92-91620d994e55",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.1",
"perimeter_speed": "60"
},
{
"layer_name": "Ulti",
"layer_id": "ead8afe5-df9e-4cbe-a782-e0c35eb2a980",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.04",
"perimeter_speed": "60"
}
]
}

249
StaticData/Profiles/Ultimaker/2 Extended.printer Normal file
View file

@ -0,0 +1,249 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "223,223",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "305",
"cancel_gcode": "G28",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F1300 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "2.85",
"fill_angle": "45",
"fill_density": "0.2",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "20",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "1",
"has_power_control": "0",
"has_sd_card_reader": "1",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.2",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.02",
"min_fan_speed": "100",
"min_print_speed": "10",
"min_skirt_length": "10",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "111,111",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": "0.22",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "1.5",
"retract_layer_change": "1",
"retract_length": "4.5",
"retract_length_tool_change": "16.5",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "40",
"show_reset_connection": "0",
"skirt_distance": "3",
"skirt_height": "1",
"skirts": "3",
"slowdown_below_layer_time": "25",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 X0 Y0 ;move X/Y to min endstops\\nG28 Z0 ;move Z to min endstops\\nM190 S[bed_temperature]\\nG1 Z15.0 F1800 ;move the platform down 15mm\\nG1 Y10 F4000\\nM109 S[temperature]\\nG92 E0 ;zero the extruded length\\nG1 F200 E30 ;extrude 30mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F130\\nM117 Printing... \t;Put printing message on LCD screen",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "0",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "30",
"support_material_threshold": "45",
"support_material_xy_distance": "1",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "1",
"support_type": "LINES",
"temperature": "210",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "0.8mm",
"travel_speed": "150",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "Ultimaker",
"model": "2 Extended",
"created_date": "7/19/2016 7:57:17 PM",
"baud_rate": "250000",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "ABS",
"layer_id": "3153247a-8218-4618-8b3c-c61853d8b3c6",
"bed_temperature": "90",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "260"
},
{
"layer_name": "PET",
"layer_id": "b78bc03b-2234-4a75-9914-5b84abe1fef6",
"bed_temperature": "60",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "250"
},
{
"layer_name": "PLA",
"layer_id": "b8b76e7a-6131-41c2-8d42-ee33a6825eaa",
"bed_temperature": "60",
"bridge_fan_speed": "100",
"extrusion_multiplier": "1",
"max_fan_speed": "100",
"min_fan_speed": "100",
"temperature": "210"
}
],
"QualityLayers": [
{
"layer_name": "Fast",
"layer_id": "5aa77365-572d-4f71-a661-ffbc357f19f9",
"external_perimeter_speed": "40",
"fill_density": "0.1",
"first_layer_speed": "30",
"infill_speed": "100",
"layer_height": "0.15",
"perimeter_speed": "80"
},
{
"layer_name": "High",
"layer_id": "ac4838d3-d6c8-46de-bc26-3f1ebb13d5b4",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.06",
"perimeter_speed": "60"
},
{
"layer_name": "Normal",
"layer_id": "52d032d9-a583-4a61-be25-59d5370c827a",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.1",
"perimeter_speed": "60"
},
{
"layer_name": "Ulti",
"layer_id": "8900227b-329f-49bf-8c66-181cef810538",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.04",
"perimeter_speed": "60"
}
]
}

251
StaticData/Profiles/Ultimaker/2+.printer Normal file
View file

@ -0,0 +1,251 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "223,223",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "205",
"cancel_gcode": "G28",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F1300 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "2.85",
"fill_angle": "45",
"fill_density": "0.2",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "20",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "1",
"has_power_control": "0",
"has_sd_card_reader": "1",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.2",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.02",
"min_fan_speed": "100",
"min_print_speed": "10",
"min_skirt_length": "10",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "111,111",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": "0.22",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "1.5",
"retract_layer_change": "1",
"retract_length": "4.5",
"retract_length_tool_change": "16.5",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "40",
"show_reset_connection": "0",
"skirt_distance": "3",
"skirt_height": "1",
"skirts": "3",
"slowdown_below_layer_time": "25",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 X0 Y0 ;move X/Y to min endstops\\nG28 Z0 ;move Z to min endstops\\nM190 S[bed_temperature]\\nG1 Z15.0 F1800 ;move the platform down 15mm\\nG1 Y10 F4000\\nM109 S[temperature]\\nG92 E0 ;zero the extruded length\\nG1 F200 E30 ;extrude 30mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F130\\nM117 Printing... \t;Put printing message on LCD screen",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "0",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "30",
"support_material_threshold": "45",
"support_material_xy_distance": "1",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "1",
"support_type": "LINES",
"temperature": "210",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "0.8mm",
"travel_speed": "150",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "Ultimaker",
"model": "2+",
"created_date": "7/19/2016 7:57:22 PM",
"baud_rate": "250000",
"default_material_presets": "PLA",
"default_quality_presets": "Normal",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "ABS",
"layer_id": "7dcec9ed-3229-4cb8-87fe-d9d77020ec0f",
"bed_temperature": "90",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "260"
},
{
"layer_name": "PET",
"layer_id": "6b3c97f8-6c2b-4599-a89c-09c46250886d",
"bed_temperature": "60",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "250"
},
{
"layer_name": "PLA",
"layer_id": "9be80dcb-d16a-4f31-ab79-697555f33381",
"bed_temperature": "60",
"bridge_fan_speed": "100",
"extrusion_multiplier": "1",
"max_fan_speed": "100",
"min_fan_speed": "100",
"temperature": "210"
}
],
"QualityLayers": [
{
"layer_name": "Fast",
"layer_id": "05492883-540e-4b5a-bbc1-3564103bbf11",
"external_perimeter_speed": "40",
"fill_density": "0.1",
"first_layer_speed": "30",
"infill_speed": "100",
"layer_height": "0.15",
"perimeter_speed": "80"
},
{
"layer_name": "High",
"layer_id": "933c8d4f-bdc2-4272-84f0-9f2b6cc682c1",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.06",
"perimeter_speed": "60"
},
{
"layer_name": "Normal",
"layer_id": "f79e8c87-63d3-4f22-86f5-dbc97ac306fd",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.1",
"perimeter_speed": "60"
},
{
"layer_name": "Ulti",
"layer_id": "36423e20-9c3e-4fcd-83ae-637079ff9de9",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.04",
"perimeter_speed": "60"
}
]
}

251
StaticData/Profiles/Ultimaker/2.printer Normal file
View file

@ -0,0 +1,251 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "223,223",
"bed_temperature": "70",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "205",
"cancel_gcode": "G28",
"center_part_on_bed": "1",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "0",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F1300 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning",
"external_perimeter_speed": "70%",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "2.85",
"fill_angle": "45",
"fill_density": "0.2",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_height": "0.3",
"first_layer_speed": "20",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "1",
"has_power_control": "0",
"has_sd_card_reader": "1",
"heat_extruder_before_homing": "0",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "60",
"infill_type": "TRIANGLES",
"layer_height": "0.2",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.02",
"min_fan_speed": "100",
"min_print_speed": "10",
"min_skirt_length": "10",
"notes": "",
"nozzle_diameter": "0.4",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "111,111",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "0",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": "0.22",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "1.5",
"retract_layer_change": "1",
"retract_length": "4.5",
"retract_length_tool_change": "16.5",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "40",
"show_reset_connection": "0",
"skirt_distance": "3",
"skirt_height": "1",
"skirts": "3",
"slowdown_below_layer_time": "25",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 X0 Y0 ;move X/Y to min endstops\\nG28 Z0 ;move Z to min endstops\\nM190 S[bed_temperature]\\nG1 Z15.0 F1800 ;move the platform down 15mm\\nG1 Y10 F4000\\nM109 S[temperature]\\nG92 E0 ;zero the extruded length\\nG1 F200 E30 ;extrude 30mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F130\\nM117 Printing... \t;Put printing message on LCD screen",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "0",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "30",
"support_material_threshold": "45",
"support_material_xy_distance": "1",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "1",
"support_type": "LINES",
"temperature": "210",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "0.8mm",
"travel_speed": "150",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "Ultimaker",
"model": "2",
"created_date": "7/19/2016 7:57:14 PM",
"baud_rate": "250000",
"default_material_presets": "PLA",
"default_quality_presets": "Normal",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "ABS",
"layer_id": "c7ceeb87-6d78-4b4d-b0e7-d333d8d090cd",
"bed_temperature": "90",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "260"
},
{
"layer_name": "PET",
"layer_id": "bc26acf7-4fa2-4c36-b1fe-957fd2529de8",
"bed_temperature": "60",
"bridge_fan_speed": "50",
"extrusion_multiplier": "1",
"max_fan_speed": "50",
"min_fan_speed": "50",
"temperature": "250"
},
{
"layer_name": "PLA",
"layer_id": "5be41a73-dc83-4d57-86e2-7846ee13af04",
"bed_temperature": "60",
"bridge_fan_speed": "100",
"extrusion_multiplier": "1",
"max_fan_speed": "100",
"min_fan_speed": "100",
"temperature": "210"
}
],
"QualityLayers": [
{
"layer_name": "Fast",
"layer_id": "00848891-ef8b-4122-8fe9-6fd19bcb6ca4",
"external_perimeter_speed": "40",
"fill_density": "0.1",
"first_layer_speed": "30",
"infill_speed": "100",
"layer_height": "0.15",
"perimeter_speed": "80"
},
{
"layer_name": "High",
"layer_id": "25e41542-24ea-4d53-bb66-4fdc6d9c8d79",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.06",
"perimeter_speed": "60"
},
{
"layer_name": "Normal",
"layer_id": "79690c0d-b913-4d78-9f82-9bb01ed9fc32",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.1",
"perimeter_speed": "60"
},
{
"layer_name": "Ulti",
"layer_id": "95ec92cc-13e3-4e45-8b64-a345bc1e417a",
"external_perimeter_speed": "30",
"fill_density": "0.2",
"first_layer_speed": "20",
"infill_speed": "80",
"layer_height": "0.04",
"perimeter_speed": "60"
}
]
}