Printer file commit

2016-07-19 13:01:20 -07:00 · 2016-07-19 13:01:20 -07:00 · 0b919be893
commit 0b919be893
parent eb416594a7
91 changed files with 23042 additions and 0 deletions
--- a/StaticData/Profiles/Other/Mendelmax
+++ b/StaticData/Profiles/Other/Mendelmax
@ -0,0 +1,129 @@
+{
+  "DocumentVersion": 201606271,
+  "ID": null,
+  "Macros": [],
+  "OemLayer": {
+    "avoid_crossing_perimeters": "1",
+    "bed_size": "225,270",
+    "bed_temperature": "55",
+    "bridge_acceleration": "0",
+    "bridge_fan_speed": "100",
+    "bridge_flow_ratio": "1",
+    "bridge_speed": "20",
+    "brim_width": "0",
+    "complete_objects": "0",
+    "cooling": "1",
+    "default_acceleration": "0",
+    "disable_fan_first_layers": "1",
+    "duplicate": "1",
+    "duplicate_distance": "6",
+    "duplicate_grid": "1,1",
+    "end_gcode": "M104 S0 ; turn off temperature\\nM140 S0 ; turn off Heatbed\\nG1 Y170 F4000 ; move print to front\\nM84     ; disable motors",
+    "external_perimeter_speed": "50",
+    "external_perimeters_first": "0",
+    "extra_perimeters": "1",
+    "extruder_clearance_height": "20",
+    "extruder_clearance_radius": "20",
+    "extruder_offset": "0x0",
+    "extrusion_axis": "E",
+    "extrusion_multiplier": "1",
+    "extrusion_width": "0",
+    "fan_always_on": "0",
+    "fan_below_layer_time": "60",
+    "filament_diameter": "2.9",
+    "fill_angle": "45",
+    "fill_density": "0.4",
+    "fill_pattern": "rectilinear",
+    "first_layer_bed_temperature": "95",
+    "first_layer_height": ".2",
+    "first_layer_speed": "0.3",
+    "first_layer_temperature": "220",
+    "g0": "0",
+    "gap_fill_speed": "20",
+    "gcode_arcs": "0",
+    "gcode_comments": "0",
+    "gcode_flavor": "reprap",
+    "infill_acceleration": "0",
+    "infill_every_layers": "1",
+    "infill_extruder": "1",
+    "infill_extrusion_width": "0",
+    "infill_first": "0",
+    "infill_only_where_needed": "0",
+    "infill_speed": "80",
+    "layer_height": "0.25",
+    "max_fan_speed": "100",
+    "min_fan_speed": "35",
+    "min_print_speed": "10",
+    "min_skirt_length": "0",
+    "notes": "",
+    "nozzle_diameter": "0.35",
+    "only_retract_when_crossing_perimeters": "0",
+    "output_filename_format": "[input_filename_base].gcode",
+    "perimeter_acceleration": "0",
+    "perimeter_extruder": "1",
+    "perimeter_extrusion_width": "0",
+    "perimeter_speed": "70",
+    "perimeters": "2",
+    "post_process": "",
+    "print_center": "112,135",
+    "raft_layers": "0",
+    "randomize_start": "1",
+    "resolution": "0",
+    "retract_before_travel": "20",
+    "retract_layer_change": "1",
+    "retract_length": "1.3",
+    "retract_length_toolchange": "3",
+    "retract_lift": "0",
+    "retract_restart_extra": "0",
+    "retract_restart_extra_toolchange": "0",
+    "retract_speed": "40",
+    "rotate": "0",
+    "scale": "1",
+    "skirt_distance": "3",
+    "skirt_height": "1",
+    "skirts": "2",
+    "slowdown_below_layer_time": "15",
+    "small_perimeter_speed": "40",
+    "solid_fill_pattern": "rectilinear",
+    "solid_infill_below_area": "70",
+    "solid_infill_every_layers": "0",
+    "solid_infill_extrusion_width": "0",
+    "solid_infill_speed": "60",
+    "spiral_vase": "0",
+    "start_gcode": "G28\\nG92 E0 ; reset extruder\\nG1 E3 F1200 ; prime 3mm\\nG1 E2 F1200 ;  retract 1mm\\nG92 E0 ; reset extruder",
+    "support_material": "",
+    "support_material_angle": "0",
+    "support_material_enforce_layers": "0",
+    "support_material_extruder": "1",
+    "support_material_extrusion_width": "0",
+    "support_material_interface_layers": "0",
+    "support_material_interface_spacing": "0",
+    "support_material_pattern": "rectilinear",
+    "support_material_spacing": "2.5",
+    "support_material_speed": "60",
+    "support_material_threshold": "45",
+    "temperature": "195",
+    "threads": "2",
+    "toolchange_gcode": "",
+    "top_infill_extrusion_width": "0",
+    "top_solid_infill_speed": "50",
+    "top_solid_layers": "1mm",
+    "travel_speed": "150",
+    "use_relative_e_distances": "0",
+    "vibration_limit": "0",
+    "wipe": "0",
+    "z_offset": "0",
+    "make": "Other",
+    "model": "Mendelmax 2",
+    "created_date": "7/19/2016 7:55:56 PM",
+    "baud_rate": "250000",
+    "default_material_presets": "PLA",
+    "windows_driver": "MHSerial.inf",
+    "calibration_files": "Calibration - Circle.stl"
+  },
+  "ActiveQualityKey": "",
+  "MaterialSettingsKeys": [],
+  "UserLayer": {},
+  "MaterialLayers": [],
+  "QualityLayers": []
+}