nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Printer file commit

Browse source
This commit is contained in:
Matt Moening 2016-07-19 13:01:20 -07:00
parent eb416594a7
commit 0b919be893
91 changed files with 23042 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

367
StaticData/Profiles/3D Stuffmaker/Core.printer Normal file
View file

@ -0,0 +1,367 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "215,215",
"bed_temperature": "0",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "15",
"brim_width": "0",
"build_height": "205",
"cancel_gcode": "G91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-10 F500 ; Retract Extruder\\nG90;\\nG28 Y; Home Y axis\\nG1 X210 Y10 F2000; bring plate to front\\nM84;",
"center_part_on_bed": "0",
"complete_objects": "0",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "1",
"default_acceleration": "0",
"disable_fan_first_layers": "0",
"end_gcode": "M104 T0 S0 ; turn off temperature\\nM104 T1 S0 ; turn off temperature\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nT0\\nG1 E-40 F800 ; Retract Extruder\\nT1\\nG1 E-40 F800\\nG90;\\nG1 X210 Y10 F2000;\\nM84;",
"external_perimeter_speed": "30",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "2",
"extruder_offset": "0x0,31.55x-0.3,0x0,0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.79",
"fill_angle": "45",
"fill_density": "10%",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_extrusion_width": "100%",
"first_layer_height": "0.15",
"first_layer_speed": "20",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "1",
"heat_extruder_before_homing": "1",
"include_firmware_updater": "Simple Arduino",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": "0",
"infill_speed": "30",
"infill_type": "LINES",
"layer_height": "0.35",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.003",
"min_fan_speed": "80",
"min_print_speed": "7",
"min_skirt_length": "3",
"notes": "",
"nozzle_diameter": "0.48",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X0 Y215 F2000; home axes\\nM84 S0",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "110,110",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "1",
"print_leveling_solution": "7 Point Disk",
"raft_air_gap": "0.25",
"raft_extra_distance_around_part": "5",
"raft_extruder": "1",
"raft_fan_speed_percent": "40",
"raft_layers": "0",
"raft_print_speed": "35",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "1",
"repair_outlines_keep_open": "1",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "4",
"retract_layer_change": "1",
"retract_length": "1",
"retract_length_tool_change": "25",
"retract_lift": "0.35",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "15",
"show_reset_connection": "1",
"skirt_distance": "2",
"skirt_height": "1",
"skirts": "3",
"slowdown_below_layer_time": "20",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "M42 P5 S128\\nG28 X0 Y0 ; home all axes\\nM106 S160\\nG28 X0 Y0 Z0\\nG91\\nG1 Z5 F3000\\nT0\\nG1 E35 F100 ; Extrude primer filament\\nT1\\nG1 E35 F100\\nT0\\nG1 Z5 F3000",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_create_internal_support": "1",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "100%",
"support_material_infill_angle": "90",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "1mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "35",
"support_material_threshold": "20",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "3",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "1.4mm",
"travel_speed": "95",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "1",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "-0.2",
"make": "3D Stuffmaker",
"model": "Core",
"created_date": "7/19/2016 7:54:08 PM",
"baud_rate": "250000",
"default_material_presets": "PLA Basic-Clear",
"default_slice_engine": "MatterSlice",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Box.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "SimplePrint Basic-Black",
"layer_id": "a49640fb-88a9-4f3e-8d3f-090e079c49a1",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Blue",
"layer_id": "a9015fd4-d530-4da8-8ccf-46cfe98b3818",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Clear",
"layer_id": "38a8e165-7615-4320-b832-be828e1dfe68",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Green",
"layer_id": "aa5aa199-b609-4b52-87eb-af92229273d6",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Ivory",
"layer_id": "714ed789-15ba-472f-b0c5-ef336712b327",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Orange",
"layer_id": "1f6f513b-a96e-4337-a8fb-729102b2c280",
"filament_diameter": "1.74",
"Ifirst_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Pink",
"layer_id": "3d16c5d6-b564-4f2f-8a90-62bcdaa97391",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Purple",
"layer_id": "6aa6d64d-b717-46e1-a57a-139ecc68f898",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Red",
"layer_id": "b3a1dbb1-59eb-4556-a80d-2409eb75471b",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Silver",
"layer_id": "67e998ed-4f04-4f6a-af28-e0e6971e8c76",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-White",
"layer_id": "db1fbd17-f99e-4042-9d42-23788d85ad5a",
"filament_diameter": "1.74",
"first_layer_temperature": "210",
"temperature": "210"
},
{
"layer_name": "SimplePrint Basic-Yellow",
"layer_id": "a87450ae-bbac-4c74-9f06-93431ea86c58",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Crystal-Trans. Blue",
"layer_id": "a7cf91b1-3082-496c-8e64-10fb514eee09",
"filament_diameter": "1.72",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Orange",
"layer_id": "21fcb318-b590-49f5-86cb-e0a08b33138d",
"filament_diameter": "1.8",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Red",
"layer_id": "5314977b-849c-4eff-b5c9-4ea23f722efc",
"filament_diameter": "1.78",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Yellow",
"layer_id": "6cae20ab-8355-48a8-8884-9961f58307e9",
"filament_diameter": "1.75",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint PLA Max-Black",
"layer_id": "3b8e4088-7bf8-423e-bc4e-6a1fbc1621db",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint PLA Max-White",
"layer_id": "80c4e005-d0e4-4c9a-b96b-c5bce03c1799",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Timber-Wood",
"layer_id": "fe29e7f8-6225-4942-87ca-ec516dfece3a",
"external_perimeter_speed": "45",
"first_layer_temperature": "198",
"infill_speed": "50",
"perimeter_speed": "50",
"retract_length": "2",
"retract_speed": "55",
"support_material_speed": "50",
"temperature": "198"
}
],
"QualityLayers": [
{
"layer_name": "High [Dual Material]",
"layer_id": "1b426181-084e-4e59-808c-4872d2c76337",
"bridge_speed": "18",
"end_gcode": "M104 T0 S0 ; turn off temperature\\nM104 T1 S0 ; turn off temperature\\nM106 S0 ; Turn off Fan\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nT0\\nG1 E-30 F800 ; Retract Extruder\\nT1\\nG1 E-30 F800\\nG90;\\nG1 X210 Y10 F3000;\\nM84;",
"layer_height": "0.1",
"raft_extra_distance_around_part": "4",
"raft_extruder": "2",
"retract_lift": "0.4",
"start_gcode": ";",
"support_material_extruder": "1",
"support_material_interface_extruder": "2",
"wipe_tower_size": "12"
},
{
"layer_name": "High [Single Material]",
"layer_id": "3a2ecb3d-b94f-4031-8b61-d8b9fddae8e5",
"bridge_speed": "18",
"end_gcode": "M104 T0 S0 ; turn off temperature\\nM104 T1 S0 ; turn off temperature\\nM106 S0 ; Turn off Fan\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nT0\\nG1 E-30 F800 ; Retract Extruder\\nG90;\\nG1 X210 Y10 F3000;\\nM84;",
"layer_height": "0.1",
"retract_lift": "0.4",
"start_gcode": ";"
},
{
"layer_name": "Standard [Dual Material]",
"layer_id": "7142aaea-7c3e-4abf-baef-c07ae56bce3a",
"bridge_speed": "21",
"end_gcode": "M104 T0 S0 ; turn off temperature\\nM104 T1 S0 ; turn off temperature\\nM106 S0 ; Turn off Fan\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nT0\\nG1 E-30 F800 ; Retract Extruder\\nT1\\nG1 E-30 F800\\nG90;\\nG1 X210 Y10 F3000;\\nM84;",
"layer_height": "0.2",
"raft_extra_distance_around_part": "4",
"raft_extruder": "2",
"retract_lift": "0.4",
"start_gcode": ";",
"support_material_extruder": "1",
"support_material_interface_extruder": "2",
"wipe_tower_size": "12"
},
{
"layer_name": "Standard [Single Material]",
"layer_id": "03d99c80-672d-4eef-90f6-d341776c4d2f",
"bridge_speed": "21",
"end_gcode": "M104 T0 S0 ; turn off temperature\\nM104 T1 S0 ; turn off temperature\\nM106 S0 ; Turn off Fan\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nT0\\nG1 E-30 F800 ; Retract Extruder\\nG90;\\nG1 X210 Y10 F3000;\\nM84;",
"layer_height": "0.2",
"retract_lift": "0.4",
"start_gcode": ";"
}
]
}

420
StaticData/Profiles/3D Stuffmaker/Creator.printer Normal file
View file

@ -0,0 +1,420 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "95,155",
"bed_temperature": "0",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "0.8",
"bridge_speed": "40",
"brim_width": "0.5",
"build_height": "110",
"cancel_gcode": "G91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-10 F500 ; Retract Extruder\\nG90;\\nG28 X0; Home X axis\\nG1 Y155 F3000; bring plate to front\\nM84;",
"center_part_on_bed": "0",
"complete_objects": "1",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "1",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ; turn off temperature\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-15 F500 ; Retract Extruder\\nG90;\\nG28 X0 ; home X axis\\nG1 Y225 F3000; bring plate to front\\nM84;",
"external_perimeter_extrusion_width": "100%",
"external_perimeter_speed": "40",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "35",
"extruder_clearance_radius": "40",
"extruder_count": "1",
"extruder_offset": "0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.74",
"fill_angle": "90",
"fill_density": "10%",
"fill_pattern": "rectilinear",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "0",
"first_layer_extrusion_width": "110%",
"first_layer_height": "0.15",
"first_layer_speed": "20",
"first_layer_temperature": "210",
"g0": "0",
"gap_fill_speed": "15",
"gcode_arcs": "0",
"gcode_comments": "1",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "0",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "0",
"heat_extruder_before_homing": "1",
"include_firmware_updater": "Simple Arduino",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "1",
"infill_overlap_perimeter": "0",
"infill_speed": "40",
"infill_type": "LINES",
"layer_height": "0.3",
"layer_to_pause": "",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.003",
"min_fan_speed": "35",
"min_print_speed": "3",
"min_skirt_length": "2",
"notes": "",
"nozzle_diameter": "0.75",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X0 Y0 F3000; home all axes\\nM84 S0",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "40",
"perimeters": "3",
"post_process": "",
"print_center": "46,80",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "1",
"print_leveling_solution": "3 Point Plane",
"raft_air_gap": "0.375",
"raft_extra_distance_around_part": "4",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "20",
"randomize_start": "1",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "1",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "3",
"retract_layer_change": "0",
"retract_length": "0.5",
"retract_length_tool_change": "10",
"retract_lift": "0.4",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "25",
"retract_when_changing_islands": "1",
"show_reset_connection": "1",
"skirt_distance": "0.7",
"skirt_height": "2",
"skirts": "3",
"slowdown_below_layer_time": "20",
"small_perimeter_speed": "10",
"solid_fill_pattern": "concentric",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "20",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "90%",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "M92 X 31.6900 Y31.5515 Z1283 E70.770\\nM205 X40\\nG28 ; home all axes\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG90\\nM109 S208 B250 F0.5",
"start_perimeters_at_concave_points": "1",
"start_perimeters_at_non_overhang": "1",
"support_air_gap": ".3",
"support_material": "0",
"support_material_angle": "45",
"support_material_create_internal_support": "0",
"support_material_create_perimeter": "1",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "100%",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "1.5mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_percent": "50",
"support_material_spacing": "2",
"support_material_speed": "30",
"support_material_threshold": "30",
"support_material_xy_distance": "3.25",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "0.9mm",
"support_type": "LINES",
"temperature": "208",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "25",
"top_solid_layers": "1.2mm",
"travel_speed": "95",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "1",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Stuffmaker",
"model": "Creator",
"created_date": "7/19/2016 7:54:10 PM",
"baud_rate": "250000",
"default_material_presets": "PLA Basic-Clear",
"default_slice_engine": "MatterSlice",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Box.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "SimplePrint Basic-Black",
"layer_id": "1cb8ec37-1ce3-4727-a331-ce3579d0fd56",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Blue",
"layer_id": "09818b89-9d6e-4866-ae2a-c5950cc872e4",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Clear",
"layer_id": "40531038-d171-445a-bccf-9033d132c75a",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Green",
"layer_id": "e67220e3-b35c-423e-828d-84ac8ab21ad7",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Ivory",
"layer_id": "762f482b-763a-4288-b714-c4dfad324826",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Orange",
"layer_id": "eef0226b-9f63-465f-b460-cccc20986b5a",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Pink",
"layer_id": "8cfaf59a-a022-4dbe-b8ed-41a60f7394fa",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Purple",
"layer_id": "d64f695b-fb31-4ce7-8438-ade2cc258b38",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Red",
"layer_id": "170276da-c391-42c5-a9e6-1b5ea352157e",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Silver",
"layer_id": "f256efec-a925-4144-87eb-eeb8f64ff202",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-White",
"layer_id": "f13998dc-d310-4d15-9207-89d7759c4463",
"filament_diameter": "1.74",
"first_layer_temperature": "210",
"temperature": "210"
},
{
"layer_name": "SimplePrint Basic-Yellow",
"layer_id": "1578b7e8-cd67-48d2-95ce-5218d9ca149f",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Crystal-Trans. Blue",
"layer_id": "7abe1d2f-7bb8-46e9-8a79-bcdf0bc5095d",
"filament_diameter": "1.72",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Orange",
"layer_id": "413e0267-05a1-487e-ae8d-7ef51e03035d",
"filament_diameter": "1.8",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Red",
"layer_id": "2d5e844b-9545-4f94-a79f-ecd236599627",
"filament_diameter": "1.78",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Yellow",
"layer_id": "b8c12ab4-d3b3-4070-8e15-59b911750f9e",
"filament_diameter": "1.75",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint PLA Max-Black",
"layer_id": "3442548f-85db-4635-8062-de3e7045a8c7",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint PLA Max-White",
"layer_id": "007a7e38-693e-4bfb-92bb-01ad46479733",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Timber-Wood",
"layer_id": "927bf753-55c4-489e-b9c7-7f1cc30c2b27",
"external_perimeter_speed": "45",
"first_layer_temperature": "198",
"infill_speed": "50",
"perimeter_speed": "50",
"retract_length": "2",
"retract_speed": "55",
"support_material_speed": "50",
"temperature": "198"
}
],
"QualityLayers": [
{
"layer_name": "High [Default with Supports]",
"layer_id": "80e7fd28-4fbb-4b35-bb38-210446d02875",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"infill_speed": "30",
"layer_height": "0.15",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "High [Default]",
"layer_id": "70927169-dc6f-4580-8fcb-370e97f9466f",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"infill_speed": "30",
"layer_height": "0.15",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
},
{
"layer_name": "High [No infill with Supports]",
"layer_id": "ee95c355-64a4-47a1-8cee-ba8c87f7b3a4",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.15",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "High [No infill]",
"layer_id": "c87750dd-51dc-4c89-ab58-134c856a6f69",
"bridge_speed": "6",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.15",
"min_print_speed": "22",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
},
{
"layer_name": "Standard [Default with Supports]",
"layer_id": "08e74b4b-12ea-47a6-b588-9513b89b25d6",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "Standard [Default]",
"layer_id": "1036257d-23b3-49b6-abca-45734b94e02c",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
},
{
"layer_name": "Standard [No infill with Supports]",
"layer_id": "8a2de3e8-fca5-4763-98b2-ab4cd61b0241",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82",
"support_material": "1"
},
{
"layer_name": "Standard [No infill]",
"layer_id": "4615b430-0545-4c4a-8ca3-97e3238c1b19",
"bridge_speed": "35",
"external_perimeter_speed": "30",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.25",
"perimeter_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nM83\\nG1 E30 F100 ; Extrude primer filament\\nM82"
}
]
}

430
StaticData/Profiles/3D Stuffmaker/Evolution.printer Normal file
View file

@ -0,0 +1,430 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_remove_part_temperature": "0",
"bed_shape": "rectangular",
"bed_size": "230,230",
"bed_temperature": "0",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "0.8",
"bridge_speed": "30",
"brim_width": "0.5",
"build_height": "200",
"cancel_gcode": "G91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-10 F500 ; Retract Extruder\\nG90;\\nG28 X0; Home X axis\\nG1 Y225 F3000; bring plate to front\\nM84;",
"center_part_on_bed": "0",
"complete_objects": "1",
"connect_gcode": "",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "1",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ; turn off temperature\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-15 F500 ; Retract Extruder\\nG90;\\nG28 X0 ; home X axis\\nG1 Y225 F3000; bring plate to front\\nM84;",
"external_perimeter_speed": "30",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "35",
"extruder_clearance_radius": "40",
"extruder_count": "1",
"extruder_offset": "0x0",
"extruder_wipe_temperature": "0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.74",
"fill_angle": "45",
"fill_density": "50%",
"fill_pattern": "rectilinear",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "0",
"first_layer_extrusion_width": "110%",
"first_layer_height": "0.15",
"first_layer_speed": "20",
"first_layer_temperature": "210",
"g0": "0",
"gap_fill_speed": "15",
"gcode_arcs": "0",
"gcode_comments": "1",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "0",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_power_control": "0",
"has_sd_card_reader": "0",
"heat_extruder_before_homing": "1",
"include_firmware_updater": "Simple Arduino",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "1",
"infill_overlap_perimeter": "0",
"infill_speed": "30",
"infill_type": "LINES",
"layer_height": "0.3",
"manual_probe_paper_width": ".1",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.003",
"min_fan_speed": "35",
"min_print_speed": "14",
"min_skirt_length": "2",
"notes": "",
"nozzle_diameter": "0.55",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X0 Y0 F3000; home all axes\\nM84 S0",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "30",
"perimeters": "3",
"post_process": "",
"print_center": "120,130",
"print_leveling_method": "Manual",
"print_leveling_required_to_print": "1",
"print_leveling_solution": "7 Point Disk",
"raft_air_gap": "0.3",
"raft_extra_distance_around_part": "4",
"raft_extruder": "0",
"raft_fan_speed_percent": "100",
"raft_layers": "0",
"raft_print_speed": "30",
"randomize_start": "1",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "1",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "3",
"retract_layer_change": "0",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0.4",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "25",
"show_reset_connection": "1",
"skirt_distance": "0.7",
"skirt_height": "2",
"skirts": "3",
"slowdown_below_layer_time": "20",
"small_perimeter_speed": "10",
"solid_fill_pattern": "concentric",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "20",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "90%",
"solid_shell": "0",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "M92 X 31.6900 Y31.5515 Z1283 E70.770\\nM205 X40\\nG28 ; home all axes\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG90\\nM109 S208 B250 F0.5",
"start_perimeters_at_concave_points": "1",
"start_perimeters_at_non_overhang": "1",
"support_material": "0",
"support_material_angle": "45",
"support_material_create_internal_support": "0",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "100%",
"support_material_infill_angle": "60",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "1.5mm",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2",
"support_material_speed": "30",
"support_material_threshold": "20",
"support_material_xy_distance": "3.25",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "0.6mm",
"support_type": "LINES",
"temperature": "208",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "35",
"top_solid_layers": "2mm",
"travel_speed": "120",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "1",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Stuffmaker",
"model": "Evolution",
"created_date": "7/19/2016 7:54:13 PM",
"baud_rate": "250000",
"default_material_presets": "PLA Clear",
"default_slice_engine": "MatterSlice",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Circle.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "SimplePrint Basic-Black",
"layer_id": "5d897990-200d-4b3e-bfe1-b4ea12524995",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Blue",
"layer_id": "2a2c9959-c353-4975-af1f-b32919b97419",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Clear",
"layer_id": "5e2b26b1-4e05-49dc-8d98-2dcab50635dd",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Green",
"layer_id": "bbe28c5f-a35b-4c54-8993-3c6629e15cca",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Ivory",
"layer_id": "f71d3286-016a-443d-92e8-66c1d37d0cc9",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Orange",
"layer_id": "15b339af-702f-416d-b808-a694cee090e1",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Pink",
"layer_id": "377d083d-7ba6-468f-8ec3-d9ebac945670",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Purple",
"layer_id": "6f2673d0-ae0e-4ad6-98be-1655f404f6c3",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Red",
"layer_id": "49f0e1ae-d308-410e-b6f0-bf1c27ac151d",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Silver",
"layer_id": "0b97b4ac-645b-4e03-ab99-c020ff5dbaa5",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-White",
"layer_id": "58821373-a0f6-4785-a738-96a219b24a9a",
"filament_diameter": "1.74",
"first_layer_temperature": "210",
"temperature": "210"
},
{
"layer_name": "SimplePrint Basic-Yellow",
"layer_id": "e6443add-5eec-421a-8c1c-ebc970cada0a",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Crystal-Trans. Blue",
"layer_id": "b1d46dd2-9b45-4003-a4ef-196a19a73044",
"filament_diameter": "1.72",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Orange",
"layer_id": "846d0d3c-9eeb-4fa4-9790-9f40cf22762f",
"filament_diameter": "1.8",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Red",
"layer_id": "e801f23d-0bfc-4bbe-8760-008c92ef2848",
"filament_diameter": "1.78",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Yellow",
"layer_id": "42919e88-ab1b-436b-a820-6764d86cca21",
"filament_diameter": "1.75",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint PLA Max-Black",
"layer_id": "3876f8af-4bf2-461a-8dc6-ea8ef4534491",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint PLA Max-White",
"layer_id": "fe72d45f-87f3-447d-969e-17a09b8f8994",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Timber-Wood",
"layer_id": "772025f6-f424-48fb-8057-6a873548bf98",
"external_perimeter_speed": "45",
"first_layer_temperature": "200",
"infill_speed": "50",
"perimeter_speed": "50",
"retract_length": "2",
"retract_speed": "55",
"support_material_speed": "50",
"temperature": "200"
}
],
"QualityLayers": [
{
"layer_name": "High [Default with supports]",
"layer_id": "a05d3643-c36a-4c58-a9c6-90357d3a4be4",
"bridge_speed": "6",
"external_perimeter_speed": "32",
"extrusion_multiplier": "1",
"infill_speed": "32",
"layer_height": "0.15",
"min_print_speed": "1",
"perimeter_speed": "32",
"raft_print_speed": "32",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90",
"support_material": "1"
},
{
"layer_name": "High [Default ]",
"layer_id": "3fc9cb8c-5bda-41a9-8d22-4ecd8a7aabe7",
"bridge_speed": "6",
"external_perimeter_speed": "40",
"extrusion_multiplier": "1",
"infill_speed": "40",
"layer_height": "0.15",
"min_print_speed": "1",
"perimeter_speed": "40",
"raft_print_speed": "40",
"start_gcode": "G28 ; home all axes\\nM\u0004\u0004109 S[temperature] B250 F1\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90"
},
{
"layer_name": "High [No infill with supports]",
"layer_id": "4e3e3b28-ecdc-4459-bcd3-1585e83f04af",
"bridge_speed": "6",
"external_perimeter_speed": "40",
"extrusion_multiplier": "1",
"fill_density": "0",
"infill_speed": "40",
"layer_height": "0.15",
"min_print_speed": "1",
"perimeter_speed": "40",
"raft_print_speed": "40",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90",
"support_material": "1"
},
{
"layer_name": "High [No infill]",
"layer_id": "e9d5d2ea-d483-46a7-a308-b429bd7d1f32",
"bridge_speed": "6",
"external_perimeter_speed": "40",
"extrusion_multiplier": "1",
"fill_density": "0",
"infill_speed": "40",
"layer_height": "0.15",
"min_print_speed": "1",
"perimeter_speed": "40",
"raft_print_speed": "40",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F1\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90"
},
{
"layer_name": "Standard [Default with supports]",
"layer_id": "494382e9-6487-46e3-80df-e1343a37cc50",
"bridge_speed": "30",
"external_perimeter_speed": "30",
"infill_speed": "30",
"layer_height": "0.25",
"min_print_speed": "0.5",
"perimeter_speed": "30",
"raft_print_speed": "30",
"start_gcode": "G28 ; home all axes\\n\u0004M109 S\u0004[temperature] B250 F2\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90",
"support_material": "1"
},
{
"layer_name": "Standard [Default]",
"layer_id": "cf7f6057-9d1d-4562-890c-b1a361f723aa",
"bridge_speed": "30",
"external_perimeter_speed": "30",
"infill_speed": "30",
"layer_height": "0.25",
"min_print_speed": "0.5",
"perimeter_speed": "30",
"raft_print_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nG91\\nG1 E30 F175 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90\\n"
},
{
"layer_name": "Standard [No infill with supports]",
"layer_id": "e725de63-4816-4a3a-b458-bb03cdc784db",
"bridge_speed": "30",
"external_perimeter_speed": "30",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.25",
"min_print_speed": "0.5",
"perimeter_speed": "30",
"raft_print_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90",
"support_material": "1"
},
{
"layer_name": "Standard [No infill]",
"layer_id": "2a833333-f5f9-4808-8e78-b579734ce7bf",
"bridge_speed": "30",
"external_perimeter_speed": "30",
"extrusion_multiplier": "1",
"fill_density": "0",
"infill_speed": "30",
"layer_height": "0.25",
"min_print_speed": "0.5",
"perimeter_speed": "30",
"raft_print_speed": "30",
"start_gcode": "G28 ; home all axes\\nM109 S[temperature] B250 F2\\nG91\\nG1 E30 F100 ; Extrude primer filament\\nG1 Z3 F315 ; Raise the Z\\nG90"
}
]
}

361
StaticData/Profiles/3D Stuffmaker/Mega i3.printer Normal file
View file

@ -0,0 +1,361 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_shape": "rectangular",
"bed_size": "310,310",
"bed_temperature": "0",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "0.8",
"bridge_speed": "27",
"brim_width": "0.5",
"build_height": "260",
"cancel_gcode": "G91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-10 F500 ; Retract Extruder\\nG90;\\nG28 X0; Home X axis\\nG1 Y225 F3000; bring plate to front\\nM84;",
"center_part_on_bed": "1",
"complete_objects": "1",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "1",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ; turn off temperature\\nG91 ; Set distance mode to relative value mode\\nG1 Z5 F5000 ; lift nozzle\\nG1 E-10 F500 ; Retract Extruder\\nG90;\\nG28 X0 ; home X axis\\nG1 Y225 F3000; bring plate to front\\nM84;",
"external_perimeter_speed": "40",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "35",
"extruder_clearance_radius": "40",
"extruder_count": "1",
"extruder_offset": "0x0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1.0",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.74",
"fill_angle": "45",
"fill_density": "0.2",
"fill_pattern": "rectilinear",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "0",
"first_layer_extrusion_width": "100%",
"first_layer_height": "0.25",
"first_layer_speed": "25",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "15",
"gcode_arcs": "0",
"gcode_comments": "1",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_sd_card_reader": "0",
"include_firmware_updater": "Simple Arduino",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "1",
"infill_overlap_perimeter": ".06",
"infill_speed": "40",
"infill_type": "LINES",
"layer_height": "0.25",
"max_fan_speed": "100",
"min_extrusion_before_retract": "0.1",
"min_fan_speed": "50",
"min_print_speed": "10",
"min_skirt_length": "2",
"notes": "",
"nozzle_diameter": "0.7",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "G1 X0 Y0 F3000; home all axes\\nM84 S0",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "40",
"perimeters": "2",
"post_process": "",
"print_center": "150,150",
"raft_air_gap": "0.3",
"raft_extra_distance_around_part": "3",
"raft_extruder": "0",
"raft_fan_speed_percent": "50",
"raft_layers": "0",
"raft_print_speed": "25",
"randomize_start": "1",
"repair_outlines_extensive_stitching": "1",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "3",
"retract_layer_change": "0",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0.0125",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "25",
"skirt_distance": "0.7",
"skirt_height": "2",
"skirts": "3",
"slowdown_below_layer_time": "10",
"small_perimeter_speed": "10",
"solid_fill_pattern": "concentric",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "20",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "90%",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 X0 Y0 ; home all axes\\nM109 S[temperature]\\nG28 Y0 Z0\\nG91",
"start_perimeters_at_concave_points": "1",
"start_perimeters_at_non_overhang": "1",
"support_material": "0",
"support_material_angle": "45",
"support_material_create_internal_support": "0",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "2",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "25",
"support_material_threshold": "25",
"support_material_xy_distance": "0.8",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "4",
"support_type": "LINES",
"temperature": "205",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "35",
"top_solid_layers": "4",
"travel_speed": "90",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "1",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Stuffmaker",
"model": "Mega i3",
"created_date": "7/19/2016 7:54:16 PM",
"baud_rate": "250000",
"default_material_presets": "PLA Basic-Clear",
"default_slice_engine": "MatterSlice",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Box.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "SimplePrint Basic-Black",
"layer_id": "d3655aa7-577f-41d6-a0ef-0a14b336d7ba",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Blue",
"layer_id": "0a4e9536-3606-4495-9f60-4e8e86673f5c",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Clear",
"layer_id": "d138d32b-d844-44e1-ad46-4dabfabc3dc3",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Green",
"layer_id": "7bfe24e3-ae7d-45cb-b7f9-bce84c6e5cf6",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Ivory",
"layer_id": "af1f80e3-7a13-4f24-8e35-fccf9be61c5a",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Orange",
"layer_id": "e4a18385-5d3f-4360-b98a-eb132284a50c",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Pink",
"layer_id": "c06849ef-a378-4a41-85bf-683c95349c64",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Purple",
"layer_id": "c2c24880-bcbc-45de-863f-9fe999ed0b64",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Red",
"layer_id": "952f8c83-3c6a-4e9f-9429-5461bdc7659e",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Silver",
"layer_id": "48ed7263-0719-48d0-9835-3f3b52ed180e",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-White",
"layer_id": "2a995fb0-5224-47ff-8bc8-426e0e4902b5",
"filament_diameter": "1.74",
"first_layer_temperature": "210",
"temperature": "210"
},
{
"layer_name": "SimplePrint Basic-Yellow",
"layer_id": "db9f078a-5d81-4925-828d-4baa7a9bffba",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Crystal-Trans. Blue",
"layer_id": "384d2f77-116a-4bc5-a2fc-29352a73e25f",
"filament_diameter": "1.72",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Orange",
"layer_id": "79f543c1-4dbe-4ddb-a2ca-7f02baaa757a",
"filament_diameter": "1.8",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Red",
"layer_id": "e376f8e7-a1b5-4d83-9e81-f71e02c2c19b",
"filament_diameter": "1.78",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Yellow",
"layer_id": "268891fc-98a2-4735-9630-7bb4567f2780",
"filament_diameter": "1.75",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint PLA Max-Black",
"layer_id": "3ef66a1a-9c05-4767-af2c-7adfdf90300c",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint PLA Max-White",
"layer_id": "cd0e5244-4738-41e4-a727-9fef78f1848d",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Timber-Wood",
"layer_id": "58d9f1fb-84c2-4ac3-93eb-83306243dccb",
"external_perimeter_speed": "45",
"first_layer_temperature": "200",
"infill_speed": "50",
"perimeter_speed": "50",
"retract_length": "2",
"retract_speed": "55",
"support_material_speed": "50",
"temperature": "200"
}
],
"QualityLayers": [
{
"layer_name": "High [Default]",
"layer_id": "d4abbaf3-84f9-47e1-bc80-abdcb3f7476f",
"layer_height": "0.15"
},
{
"layer_name": "High [no infill-hollow]",
"layer_id": "b2da55f1-e4ad-4c3b-b7f0-797aaaaac244",
"fill_density": "0",
"layer_height": "0.15"
},
{
"layer_name": "High [with support structure]",
"layer_id": "a8cf654b-2b32-4304-8828-fbd4fde5d446",
"layer_height": "0.15",
"support_material": "1"
},
{
"layer_name": "Standard [Default]",
"layer_id": "eb548313-64ef-44e8-a5f0-cd22441e48f8",
"layer_height": "0.25"
},
{
"layer_name": "Standard [no infill-hollow]",
"layer_id": "406aafdc-be65-4158-83a2-5afa2b22d175",
"fill_density": "0",
"layer_height": "0.25"
},
{
"layer_name": "Standard [with support structure]",
"layer_id": "e9a24c4c-c189-4106-84d7-fb7af2145527",
"layer_height": "0.25",
"support_material": "1"
},
{
"layer_name": "Super High [Default]",
"layer_id": "959b7773-6c68-4cd2-bddf-134d4220135a",
"layer_height": "0.09"
},
{
"layer_name": "Super High [no infill-hollow]",
"layer_id": "cdb22b5d-de4f-4c04-84f5-17a3ec5544a2",
"fill_density": "0",
"layer_height": "0.09"
},
{
"layer_name": "Super High [with support structure]",
"layer_id": "2244fc3b-64eb-48fe-8cdb-f75d91668fa8",
"layer_height": "0.09",
"support_material": "1"
}
]
}

361
StaticData/Profiles/3D Stuffmaker/i3 Plus+.printer Normal file
View file

@ -0,0 +1,361 @@
{
"DocumentVersion": 201606271,
"ID": null,
"Macros": [],
"OemLayer": {
"avoid_crossing_perimeters": "1",
"bed_shape": "rectangular",
"bed_size": "210,210",
"bed_temperature": "0",
"bottom_clip_amount": "0",
"bridge_acceleration": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "1",
"bridge_speed": "20",
"brim_width": "0",
"build_height": "200",
"cancel_gcode": "",
"center_part_on_bed": "1",
"complete_objects": "0",
"cool_extruder_lift": "0",
"cooling": "1",
"create_raft": "1",
"default_acceleration": "0",
"disable_fan_first_layers": "1",
"end_gcode": "M104 S0 ; turn off temperature\\nG28 X0 ; home X axis\\nM84 ; disable motors",
"external_perimeter_speed": "45",
"external_perimeters_first": "0",
"extra_perimeters": "1",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "20",
"extruder_count": "1",
"extruder_offset": "0x0,0x0,0x0,0x0",
"extruders_share_temperature": "0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0",
"fan_always_on": "0",
"fan_below_layer_time": "60",
"filament_diameter": "1.75",
"fill_angle": "45",
"fill_density": "0.2",
"fill_pattern": "honeycomb",
"first_layer_acceleration": "0",
"first_layer_bed_temperature": "75",
"first_layer_extrusion_width": "100%",
"first_layer_height": "0.3",
"first_layer_speed": "30%",
"first_layer_temperature": "205",
"g0": "0",
"gap_fill_speed": "20",
"gcode_arcs": "0",
"gcode_comments": "0",
"gcode_flavor": "reprap",
"gcode_output_type": "REPRAP",
"has_fan": "1",
"has_hardware_leveling": "0",
"has_heated_bed": "0",
"has_sd_card_reader": "0",
"include_firmware_updater": "Simple Arduino",
"infill_acceleration": "0",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0",
"infill_first": "0",
"infill_only_where_needed": "0",
"infill_overlap_perimeter": ".06",
"infill_speed": "45",
"infill_type": "TRIANGLES",
"layer_height": "0.25",
"max_fan_speed": "100",
"min_extrusion_before_retract": ".1",
"min_fan_speed": "50",
"min_print_speed": "10",
"min_skirt_length": "0",
"notes": "",
"nozzle_diameter": "0.7",
"only_retract_when_crossing_perimeters": "1",
"ooze_prevention": "0",
"output_filename_format": "[input_filename_base].gcode",
"overhangs": "1",
"pause_gcode": "",
"perimeter_acceleration": "0",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0",
"perimeter_speed": "45",
"perimeters": "3",
"post_process": "",
"print_center": "100,100",
"raft_air_gap": "0.35",
"raft_extra_distance_around_part": "5",
"raft_extruder": "0",
"raft_fan_speed_percent": "50",
"raft_layers": "0",
"raft_print_speed": "100%",
"randomize_start": "0",
"repair_outlines_extensive_stitching": "0",
"repair_outlines_keep_open": "0",
"resolution": "0",
"resume_gcode": "",
"retract_before_travel": "20",
"retract_layer_change": "1",
"retract_length": "1",
"retract_length_tool_change": "10",
"retract_lift": "0",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "30",
"skirt_distance": "6",
"skirt_height": "1",
"skirts": "1",
"slowdown_below_layer_time": "30",
"small_perimeter_speed": "30",
"solid_fill_pattern": "rectilinear",
"solid_infill_below_area": "70",
"solid_infill_every_layers": "0",
"solid_infill_extrusion_width": "0",
"solid_infill_speed": "60",
"spiral_vase": "0",
"standby_temperature_delta": "-5",
"start_gcode": "G28 X0 Y0 ; home all axes\\nM109 S[temperature]\\nG28 Y0 Z0\\nG91\\n\\n",
"start_perimeters_at_concave_points": "0",
"start_perimeters_at_non_overhang": "0",
"support_material": "0",
"support_material_angle": "45",
"support_material_create_internal_support": "0",
"support_material_enforce_layers": "0",
"support_material_extruder": "1",
"support_material_extrusion_width": "0",
"support_material_infill_angle": "45",
"support_material_interface_extruder": "1",
"support_material_interface_layers": "3",
"support_material_interface_spacing": "0",
"support_material_pattern": "honeycomb",
"support_material_spacing": "2.5",
"support_material_speed": "40",
"support_material_threshold": "0",
"support_material_xy_distance": "0.7",
"support_material_z_distance": "0.15",
"support_material_z_gap_layers": "1",
"support_type": "LINES",
"temperature": "200",
"thin_walls": "1",
"threads": "2",
"toolchange_gcode": "",
"top_infill_extrusion_width": "0",
"top_solid_infill_speed": "50",
"top_solid_layers": "3",
"travel_speed": "90",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"vibration_limit": "0",
"wipe": "0",
"wipe_shield_distance": "0",
"wipe_tower_size": "0",
"z_can_be_negative": "0",
"z_offset": "0",
"make": "3D Stuffmaker",
"model": "i3 Plus+",
"created_date": "7/19/2016 7:54:14 PM",
"baud_rate": "250000",
"default_material_presets": "PLA Basic-Clear",
"default_slice_engine": "MatterSlice",
"windows_driver": "MHSerial.inf",
"calibration_files": "Calibration - Box.stl"
},
"ActiveQualityKey": "",
"MaterialSettingsKeys": [],
"UserLayer": {},
"MaterialLayers": [
{
"layer_name": "SimplePrint Basic-Black",
"layer_id": "a47e36bd-a1e5-49b6-85f4-11840da78972",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Blue",
"layer_id": "cc6824cd-315f-4793-9bec-68d2719c2b04",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Clear",
"layer_id": "fee5b0cb-9aec-452e-aced-40d0dbf6a05e",
"filament_diameter": "1.74",
"first_layer_temperature": "205",
"temperature": "205"
},
{
"layer_name": "SimplePrint Basic-Green",
"layer_id": "ef996a19-b1c5-47d5-82a7-80b7eb83dfa1",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Ivory",
"layer_id": "a3dd4e42-b529-4270-8efa-ce77700a4bf3",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Orange",
"layer_id": "1a7ac27c-2067-4135-9417-e42d8aa67183",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Pink",
"layer_id": "321e17db-3c3b-413a-b512-cb9ae1482cf9",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Purple",
"layer_id": "f053bfed-2c66-4ef5-b39c-8893f42228fb",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Red",
"layer_id": "91f8b453-4721-49f0-84c5-d2507ad4424e",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-Silver",
"layer_id": "c1b15a1d-4b29-4dd3-a3a9-66f3594b1a1e",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Basic-White",
"layer_id": "449a9de7-aea8-4c7c-ac22-8118632dd79d",
"filament_diameter": "1.74",
"first_layer_temperature": "210",
"temperature": "210"
},
{
"layer_name": "SimplePrint Basic-Yellow",
"layer_id": "e4c18ad8-dbbe-423d-864f-04445e5d1832",
"filament_diameter": "1.74",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Crystal-Trans. Blue",
"layer_id": "d252019b-f5be-4fc8-a99b-963d6f6bffb8",
"filament_diameter": "1.72",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Orange",
"layer_id": "46d41bc6-0299-4610-8ef1-b23513ecfb2f",
"filament_diameter": "1.8",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Red",
"layer_id": "c6fa7400-152b-40d7-aceb-bf6ca4e9b32d",
"filament_diameter": "1.78",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint Crystal-Trans. Yellow",
"layer_id": "97261ec7-c667-49f2-aaa8-d346dd7b8090",
"filament_diameter": "1.75",
"first_layer_temperature": "220",
"temperature": "220"
},
{
"layer_name": "SimplePrint PLA Max-Black",
"layer_id": "de6a2440-5507-4e98-a568-130fd93e4624",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint PLA Max-White",
"layer_id": "df322c77-90ca-4bbc-acd3-66599b3abdc5",
"filament_diameter": "1.79",
"first_layer_temperature": "200",
"temperature": "200"
},
{
"layer_name": "SimplePrint Timber-Wood",
"layer_id": "8f73481c-f5c0-4cbe-8f94-233f8260a0b5",
"external_perimeter_speed": "45",
"first_layer_temperature": "200",
"infill_speed": "50",
"perimeter_speed": "50",
"retract_length": "2",
"retract_speed": "55",
"support_material_speed": "50",
"temperature": "200"
}
],
"QualityLayers": [
{
"layer_name": "High [Default]",
"layer_id": "b69acbff-19f5-431b-b6ec-2b840df02718",
"layer_height": "0.15"
},
{
"layer_name": "High [no infill-hollow]",
"layer_id": "020f8441-851a-43ac-9c7c-9290c540a566",
"fill_density": "0",
"layer_height": "0.15"
},
{
"layer_name": "High [with support structure]",
"layer_id": "f41531fa-8a3a-4828-8936-92c5bff6aaa9",
"layer_height": "0.15",
"support_material": "1"
},
{
"layer_name": "Standard [Default]",
"layer_id": "8b8c727a-0d68-4c9a-988d-49c572e1cdb2",
"layer_height": "0.25"
},
{
"layer_name": "Standard [no infill-hollow]",
"layer_id": "8c21d03e-5c02-43ea-8615-919eb840754c",
"fill_density": "0",
"layer_height": "0.25"
},
{
"layer_name": "Standard [with support structure]",
"layer_id": "876afe9b-4316-4b55-a4f0-1928fb1b241e",
"layer_height": "0.25",
"support_material": "1"
},
{
"layer_name": "Super High [Default]",
"layer_id": "642e3bb8-8292-44ff-befe-1e537c8d34bc",
"layer_height": "0.09"
},
{
"layer_name": "Super High [no infill-hollow]",
"layer_id": "91b6b6b7-ca13-4c99-8df3-9ba6999bf4e5",
"fill_density": "0",
"layer_height": "0.09"
},
{
"layer_name": "Super High [with support structure]",
"layer_id": "9abd6fb4-7499-4785-9d3d-db0a860ef239",
"layer_height": "0.09",
"support_material": "1"
}
]
}