From 08c8205f5997a2be97d60fffe0012deabea42fec Mon Sep 17 00:00:00 2001
From: Gregory Diaz <greg.diaz@matterhackers.com>
Date: Thu, 19 Mar 2015 12:18:16 -0700
Subject: [PATCH] Updated settings for all 3D Stuffmaker printers.

---
 StaticData/PrinterSettings/3D Stuffmaker/Core/config.ini    | 6 +++---
 StaticData/PrinterSettings/3D Stuffmaker/Creator/config.ini | 2 +-
 .../PrinterSettings/3D Stuffmaker/Evolution/config.ini      | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/StaticData/PrinterSettings/3D Stuffmaker/Core/config.ini b/StaticData/PrinterSettings/3D Stuffmaker/Core/config.ini
index ee726faf1..fccd7d6ad 100644
--- a/StaticData/PrinterSettings/3D Stuffmaker/Core/config.ini	
+++ b/StaticData/PrinterSettings/3D Stuffmaker/Core/config.ini	
@@ -3,7 +3,7 @@ bed_shape = rectangular
 bed_size = 215,215
 bed_temperature = 0
 bottom_clip_amount = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
@@ -52,7 +52,7 @@ has_fan = 1
 has_hardware_leveling = 0
 has_heated_bed = 0
 has_sd_card_reader = 1
-heat_extruder_before_homing = 0
+heat_extruder_before_homing = 1
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
@@ -63,7 +63,7 @@ infill_overlap_perimeter = .06
 infill_speed = 20
 infill_type = LINES
 layer_gcode = 
-layer_height = 0.2
+layer_height = 0.3
 max_fan_speed = 100
 min_extrusion_before_retract = .1
 min_fan_speed = 70
diff --git a/StaticData/PrinterSettings/3D Stuffmaker/Creator/config.ini b/StaticData/PrinterSettings/3D Stuffmaker/Creator/config.ini
index 908ff7f0f..e02dcdb53 100644
--- a/StaticData/PrinterSettings/3D Stuffmaker/Creator/config.ini	
+++ b/StaticData/PrinterSettings/3D Stuffmaker/Creator/config.ini	
@@ -3,7 +3,7 @@ bed_shape = rectangular
 bed_size = 102,160
 bed_temperature = 0
 bottom_clip_amount = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 4
 bridge_acceleration = 500
 bridge_fan_speed = 100
 bridge_flow_ratio = 0.9
diff --git a/StaticData/PrinterSettings/3D Stuffmaker/Evolution/config.ini b/StaticData/PrinterSettings/3D Stuffmaker/Evolution/config.ini
index 85f56c9a6..ca2458c74 100644
--- a/StaticData/PrinterSettings/3D Stuffmaker/Evolution/config.ini	
+++ b/StaticData/PrinterSettings/3D Stuffmaker/Evolution/config.ini	
@@ -3,7 +3,7 @@ bed_shape = rectangular
 bed_size = 230,230
 bed_temperature = 0
 bottom_clip_amount = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 0.8
@@ -117,7 +117,7 @@ standby_temperature_delta = -5
 start_gcode = G28 X0 Y0 Z0; home all axes\nG91\nG1 E30 F100 ;  Extrude primer filament
 start_perimeters_at_concave_points = 1
 start_perimeters_at_non_overhang = 1
-support_material = 1
+support_material = 0
 support_material_angle = 45
 support_material_create_internal_support = 0
 support_material_enforce_layers = 0