mattercontrol/StaticData/SliceSettings/Layouts.txt

Advanced
  General
    General
      General
        layer_height
        first_layer_height
        perimeters
        top_solid_layers
        bottom_solid_layers
        fill_density
        infill_type
    Layers / Surface
      Outer Surface - Perimeters
        avoid_crossing_perimeters
        external_perimeters_first
        perimeter_start_end_overlap
        merge_overlapping_lines
        expand_thin_walls
    Infill
      Advanced
        fill_angle
        infill_overlap_perimeter
        fill_thin_gaps
    Extruder Change
      Extruder Change
        wipe_shield_distance
        wipe_tower_size
  Speed
    Speed
      Printing Speed
        laser_speed_025
        laser_speed_100
      Speed for Infill
        infill_speed
        top_solid_infill_speed
        raft_print_speed
      Speed for Perimeters
        perimeter_speed
        external_perimeter_speed
      Other 
        support_material_speed
        bridge_speed
        travel_speed
        first_layer_speed
        number_of_first_layers
    Fan
      Fan
        min_fan_speed
        max_fan_speed
        bridge_fan_speed
        disable_fan_first_layers
    Cooling
      Cooling Thresholds
        slowdown_below_layer_time
        min_print_speed
  Adhesion
    Adhesion
      Enable
        create_raft
    Raft
      Raft
        raft_extra_distance_around_part
        raft_air_gap
        raft_fan_speed_percent
        raft_extruder
    Skirt
      Skirt
        skirts
        skirt_distance
        min_skirt_length
    Brim
      Brim
        brims
  Support
    Support
      Support
        support_material
        support_material_create_internal_support
        support_material_percent
    Advanced
      Support Options
        support_material_create_perimeter
        support_material_interface_layers
        support_material_xy_distance
        support_air_gap
        support_type
        support_material_spacing
        support_material_infill_angle
        support_material_extruder
        support_material_interface_extruder
  Filament
    Filament
      Filament
        filament_diameter
        filament_density
        filament_cost
        temperature
        bed_temperature
    Advanced
      Material
      Temperatures
        extruder_wipe_temperature
        bed_remove_part_temperature
      Extrusion
        extrusion_multiplier
      Extrusion Width
        first_layer_extrusion_width
        external_perimeter_extrusion_width
        support_material_extrusion_width
    Retraction
      After Move
        enable_retractions
        retract_length
        retract_restart_extra
        retract_restart_extra_time_to_apply
        retract_speed
        retract_lift
        retract_before_travel
        retract_when_changing_islands
        min_extrusion_before_retract
        wipe
      Before Tool Change
        retract_length_tool_change
        retract_restart_extra_toolchange
Printer
  General
    General
      Settings
        auto_connect
        baud_rate
        com_port
        selector_ip_address
        ip_address
        ip_port
    Bed
      Size and Coordinates
        bed_size
        print_center
        build_height
        z_offset
        bed_shape
    Extruders
      Extruders
        extruder_count
        nozzle_diameter
        extruders_share_temperature
        extruder_offset
  Features
    Features
      Interface
        sla_printer
        show_reset_connection
        include_firmware_updater
        backup_firmware_before_update
      Print Recovery
        recover_is_enabled
        recover_first_layer_speed
        recover_position_before_z_home
      Print Leveling
        print_leveling_solution
        leveling_manual_positions
        print_leveling_required_to_print
      Leveling Probe
        print_leveling_probe_start
        use_z_probe
        z_probe_samples
        z_probe_xy_offset
        z_probe_z_offset
        z_servo_depolyed_angle
        z_servo_retracted_angle
    Hardware
      Hardware
        has_fan
        has_hardware_leveling
        has_heated_bed
        has_sd_card_reader
        has_power_control
        filament_runout_sensor
        has_z_probe
        has_z_servo
        enable_network_printing
        enable_sailfish_communication
    Behavior
      Behavior
        z_homes_to_max
        heat_extruder_before_homing
        auto_release_motors
        validate_layer_height
        send_with_checksum
        reset_long_extrusion
    Slicing
      Slicing Options
        output_only_first_layer
        g0
  G-Code
    G-Code
      G-Code
        start_gcode
        end_gcode
        layer_gcode
        before_toolchange_gcode
        toolchange_gcode
        pause_gcode
        resume_gcode
        cancel_gcode
        connect_gcode
      Filters
        write_regex
        read_regex
Commit of the code 2014-01-29 19:09:30 -08:00			`Advanced`
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names. 2015-06-05 11:17:28 -07:00			`General`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`General`
			`General`
Commit of the code 2014-01-29 19:09:30 -08:00			`layer_height`
			`first_layer_height`
			`perimeters`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`top_solid_layers`
			`bottom_solid_layers`
			`fill_density`
			`infill_type`
			`Layers / Surface`
			`Outer Surface - Perimeters`
Cleaning up some settings names and organization. Added bed size to MatterSlice settings 2014-03-25 14:10:26 -07:00			`avoid_crossing_perimeters`
Moved the outside first 2015-01-24 11:26:45 -08:00			`external_perimeters_first`
Put in the ability to set how much the perimeter overlap is set to 2016-07-22 14:02:39 -07:00			`perimeter_start_end_overlap`
Put in the ability to turn off Merge Overlapping Lines Fixes a possible regression in slicing 2016-10-27 18:36:02 -07:00			`merge_overlapping_lines`
Default new thin filling code to on. 2016-09-06 17:15:20 -07:00			`expand_thin_walls`
Commit of the code 2014-01-29 19:09:30 -08:00			`Infill`
			`Advanced`
			`fill_angle`
fixed spelling of positive put in more matterslice settings. 2014-03-25 12:14:03 -07:00			`infill_overlap_perimeter`
Adding in the ability to turn on and off thin line code Sorted some settings lists Put in minimum thin line width option Clean thin line output 2016-08-26 12:13:39 -07:00			`fill_thin_gaps`
Move Extruder Change section to General 2018-01-04 12:38:43 -08:00			`Extruder Change`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`Extruder Change`
Move Extruder Change section to General 2018-01-04 12:38:43 -08:00			`wipe_shield_distance`
			`wipe_tower_size`
Revise slice settings 2018-01-04 10:37:41 -08:00			`Speed`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Speed`
Added first pass at support for SLA printers Took out unused slice settings 2017-10-30 13:08:28 -07:00			`Printing Speed`
			`laser_speed_025`
			`laser_speed_100`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Speed for Infill`
Commit of the code 2014-01-29 19:09:30 -08:00			`infill_speed`
			`top_solid_infill_speed`
Put in speeds for raft printing and raft fan 2014-10-27 14:23:22 -07:00			`raft_print_speed`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Speed for Perimeters`
Cleaning up some settings names and organization. Added bed size to MatterSlice settings 2014-03-25 14:10:26 -07:00			`perimeter_speed`
			`external_perimeter_speed`
Consolidate Other speeds 2018-01-02 23:32:11 -08:00			`Other`
Commit of the code 2014-01-29 19:09:30 -08:00			`support_material_speed`
			`bridge_speed`
			`travel_speed`
			`first_layer_speed`
Added in the ability to set the number of first layers layers that print slow 2017-09-22 16:31:49 -07:00			`number_of_first_layers`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Fan`
Consolidate Cooling into Speeds 2018-01-03 17:45:49 -08:00			`Fan`
			`min_fan_speed`
			`max_fan_speed`
			`bridge_fan_speed`
			`disable_fan_first_layers`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Cooling`
Consolidate Cooling into Speeds 2018-01-03 17:45:49 -08:00			`Cooling Thresholds`
			`slowdown_below_layer_time`
			`min_print_speed`
Revise slice settings 2018-01-04 10:37:41 -08:00			`Adhesion`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Adhesion`
			`Enable`
Putting in more multi extruder support Reorganizing the slice settings layouts 2014-09-25 11:01:15 -07:00			`create_raft`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Raft`
			`Raft`
Putting in more multi extruder support Reorganizing the slice settings layouts 2014-09-25 11:01:15 -07:00			`raft_extra_distance_around_part`
			`raft_air_gap`
Put in speeds for raft printing and raft fan 2014-10-27 14:23:22 -07:00			`raft_fan_speed_percent`
Put in an option to set the extruder to use for the raft. 2014-11-23 08:13:51 -08:00			`raft_extruder`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Skirt`
Changed labels for skirt and brim 2017-02-15 15:52:01 -08:00			`Skirt`
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings 2016-09-07 10:00:15 -07:00			`skirts`
			`skirt_distance`
			`min_skirt_length`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Brim`
Commit of the code 2014-01-29 19:09:30 -08:00			`Brim`
Changed labels for skirt and brim 2017-02-15 15:52:01 -08:00			`brims`
Revise slice settings 2018-01-04 10:37:41 -08:00			`Support`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Support`
			`Support`
Commit of the code 2014-01-29 19:09:30 -08:00			`support_material`
Made more support slice settings stay enabled removed more unused settings 2018-01-12 08:49:22 -08:00			`support_material_create_internal_support`
Design tools 2017-03-15 16:17:06 -07:00			`support_material_percent`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Advanced`
Made more support slice settings stay enabled removed more unused settings 2018-01-12 08:49:22 -08:00			`Support Options`
			`support_material_create_perimeter`
Commit of the code 2014-01-29 19:09:30 -08:00			`support_material_interface_layers`
			`support_material_xy_distance`
Put in a air gap for support (separate from raft) 2015-12-24 10:06:40 -08:00			`support_air_gap`
Made more support slice settings stay enabled removed more unused settings 2018-01-12 08:49:22 -08:00			`support_type`
			`support_material_spacing`
			`support_material_infill_angle`
Putting in more multi extruder support Reorganizing the slice settings layouts 2014-09-25 11:01:15 -07:00			`support_material_extruder`
			`support_material_interface_extruder`
Commit of the code 2014-01-29 19:09:30 -08:00			`Filament`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Filament`
			`Filament`
Commit of the code 2014-01-29 19:09:30 -08:00			`filament_diameter`
added filament density and cost settings to UI 2016-06-27 12:32:50 -07:00			`filament_density`
			`filament_cost`
Commit of the code 2014-01-29 19:09:30 -08:00			`temperature`
			`bed_temperature`
Revise slice settings categories 2018-01-11 12:29:32 -08:00			`Advanced`
			`Material`
			`Temperatures`
			`extruder_wipe_temperature`
added 'Extruder Wipe Temperature' and "Bed Remove Part Temperature" to Slice Settings 2015-04-24 10:25:03 -07:00			`bed_remove_part_temperature`
Consolidate Filament sections 2018-01-02 23:00:14 -08:00			`Extrusion`
			`extrusion_multiplier`
			`Extrusion Width`
			`first_layer_extrusion_width`
			`external_perimeter_extrusion_width`
			`support_material_extrusion_width`
Updated the layout of the Filament tab 2016-07-19 09:45:10 -07:00			`Retraction`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`After Move`
Put in a enable retract setting Made slice settings disable work 2017-08-02 15:19:32 -07:00			`enable_retractions`
Putting in more multi extruder support Reorganizing the slice settings layouts 2014-09-25 11:01:15 -07:00			`retract_length`
Put in unretract extra on tool change. Moved tool change to a separate section 2016-06-06 16:20:48 -07:00			`retract_restart_extra`
Put in the ability to ramp the extra extrusion after move Made the change islands retract always occur if requested. 2017-07-07 08:40:54 -07:00			`retract_restart_extra_time_to_apply`
Putting in more multi extruder support Reorganizing the slice settings layouts 2014-09-25 11:01:15 -07:00			`retract_speed`
			`retract_lift`
			`retract_before_travel`
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions. 2016-01-13 14:26:31 -08:00			`retract_when_changing_islands`
Putting in more multi extruder support Reorganizing the slice settings layouts 2014-09-25 11:01:15 -07:00			`min_extrusion_before_retract`
			`wipe`
Put in a enable retract setting Made slice settings disable work 2017-08-02 15:19:32 -07:00			`Before Tool Change`
Put in unretract extra on tool change. Moved tool change to a separate section 2016-06-06 16:20:48 -07:00			`retract_length_tool_change`
Putting in more multi extruder support Reorganizing the slice settings layouts 2014-09-25 11:01:15 -07:00			`retract_restart_extra_toolchange`
Configure -> Printer prototype - Issue MatterHackers/MCCentral#2408 Migrate SliceSettings -> Printer to Printer -> Setup 2017-12-27 13:45:47 -08:00			`Printer`
			`General`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`General`
Configure -> Printer prototype - Issue MatterHackers/MCCentral#2408 Migrate SliceSettings -> Printer to Printer -> Setup 2017-12-27 13:45:47 -08:00			`Settings`
Took out the prepend of MatterControl on profile settings and made them consistent lower case underscore. 2016-06-16 16:35:10 -07:00			`auto_connect`
			`baud_rate`
			`com_port`
Add List of zero-conf telnet connects to allow auto detection of MCConnect 2017-12-15 17:52:17 -08:00			`selector_ip_address`
Networked Printing enabled in MC - Added properties to enable s3g coms, enable networked communication, store IP and port - updated Settings on Change to be a dictionary that stores what they are changing and how to do it - added handling in check box for SettingsOnChange - SerialPortIsAvailable returns true when networked printing is enabled - Engine mapping base updated for new properties 2016-07-29 14:48:41 -07:00			`ip_address`
			`ip_port`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`Bed`
Commit of the code 2014-01-29 19:09:30 -08:00			`Size and Coordinates`
			`bed_size`
			`print_center`
			`build_height`
			`z_offset`
putting in support for circular beds (and bed shapes) changing SeeMeCNC to have circular beds white listing RoBo 3D 2014-02-05 12:04:05 -08:00			`bed_shape`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`Extruders`
Configure -> Printer prototype - Issue MatterHackers/MCCentral#2408 Migrate SliceSettings -> Printer to Printer -> Setup 2017-12-27 13:45:47 -08:00			`Extruders`
			`extruder_count`
			`nozzle_diameter`
			`extruders_share_temperature`
			`extruder_offset`
			`Features`
Put in printer the backup firmware setting 2018-01-12 16:43:49 -08:00			`Features`
Added the printer name to slice settings ui Reorganized settings layout a bit for printer/ fatures Made more invert lightness extension method uses 2016-05-10 13:30:51 -07:00			`Interface`
Added first pass at support for SLA printers Took out unused slice settings 2017-10-30 13:08:28 -07:00			`sla_printer`
Added the printer name to slice settings ui Reorganized settings layout a bit for printer/ fatures Made more invert lightness extension method uses 2016-05-10 13:30:51 -07:00			`show_reset_connection`
			`include_firmware_updater`
Put in printer the backup firmware setting 2018-01-12 16:43:49 -08:00			`backup_firmware_before_update`
Configure -> Printer prototype - Issue MatterHackers/MCCentral#2408 Migrate SliceSettings -> Printer to Printer -> Setup 2017-12-27 13:45:47 -08:00			`Print Recovery`
			`recover_is_enabled`
			`recover_first_layer_speed`
			`recover_position_before_z_home`
			`Print Leveling`
			`print_leveling_solution`
			`leveling_manual_positions`
			`print_leveling_required_to_print`
			`Leveling Probe`
			`print_leveling_probe_start`
			`use_z_probe`
			`z_probe_samples`
			`z_probe_xy_offset`
			`z_probe_z_offset`
			`z_servo_depolyed_angle`
			`z_servo_retracted_angle`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`Hardware`
Made the about window always on top made an update notification in the menu bar area took the "about' tab off the main page Cleaned up the checking of touchscreen Made a new Features section for the printer settings 2015-05-20 10:55:14 -07:00			`Hardware`
			`has_fan`
			`has_hardware_leveling`
			`has_heated_bed`
			`has_sd_card_reader`
			`has_power_control`
All new 1.7.1 changes 2017-05-19 14:39:57 -07:00			`filament_runout_sensor`
			`has_z_probe`
Merging in 1.7.1 improvements 2017-06-07 15:56:02 -07:00			`has_z_servo`
Refactored network printing settings to match the other printer settings Took out the automatic changes to other settings 2016-12-12 12:14:30 -08:00			`enable_network_printing`
			`enable_sailfish_communication`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`Behavior`
Added the printer name to slice settings ui Reorganized settings layout a bit for printer/ fatures Made more invert lightness extension method uses 2016-05-10 13:30:51 -07:00			`Behavior`
			`z_homes_to_max`
Made the about window always on top made an update notification in the menu bar area took the "about' tab off the main page Cleaned up the checking of touchscreen Made a new Features section for the printer settings 2015-05-20 10:55:14 -07:00			`heat_extruder_before_homing`
Made it configurable if the motors are released automatically at the end of a print 2017-12-03 14:40:50 -08:00			`auto_release_motors`
Put in validate layer height made right button not do design tools check starting bed temp 2017-08-21 15:45:43 -07:00			`validate_layer_height`
added ability to turn off send with checksum made print_center setting show up 2017-11-30 13:59:14 -08:00			`send_with_checksum`
Adding support for turning on and off extruder long run reset 2017-11-30 09:43:14 -08:00			`reset_long_extrusion`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`Slicing`
Consolidate Output Options -> File Settings into Printer -> Features 2018-01-02 23:19:21 -08:00			`Slicing Options`
			`output_only_first_layer`
			`g0`
Configure -> Printer prototype - Issue MatterHackers/MCCentral#2408 Migrate SliceSettings -> Printer to Printer -> Setup 2017-12-27 13:45:47 -08:00			`G-Code`
Extract SliceSettingsWidget settings/tab view to reusable control - Make Configure Printer persist/restore last tab - Revise layouts.txt groups - Issue MatterHackers/MCCentral#2646 Configure Printer should use same implementation as SliceSettingsWidget 2018-01-14 10:13:42 -08:00			`G-Code`
			`G-Code`
Commit of the code 2014-01-29 19:09:30 -08:00			`start_gcode`
			`end_gcode`
			`layer_gcode`
Put in a before tool change gcode property 2016-04-25 16:42:00 -07:00			`before_toolchange_gcode`
Commit of the code 2014-01-29 19:09:30 -08:00			`toolchange_gcode`
Got pause, resume and cancel gcode into the settings and working in printer communication. 2014-03-17 14:41:36 -07:00			`pause_gcode`
			`resume_gcode`
			`cancel_gcode`
Added a connect_gcode. Gcode that is sent just after connecting to the printer. 2015-05-18 16:58:09 -07:00			`connect_gcode`
Remove per-field GCode sections, improve highlight styling 2017-09-13 06:40:30 -07:00			`Filters`
Put in regex read write translation code 2017-06-29 09:47:34 -07:00			`write_regex`
			`read_regex`