nettika/mattercontrol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
mattercontrol/StaticData/SliceSettings/Layouts.txt

345 lines
8 KiB
Text
Raw Normal View History

Made the pre-heat use the temperature and bed_temperature . Put in a menu to select the slice settings level.
2014-12-08 16:40:50 -08:00
Simple
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names.
2015-06-05 11:17:28 -07:00
General
Did some work to show a minimal slice settings page.
2014-11-19 21:35:48 -08:00
Single
Made a function to filter com port names for mac Change the text in basic mode
2016-11-02 15:56:27 -07:00
Layers & Infill
Did some work to show a minimal slice settings page.
2014-11-19 21:35:48 -08:00
layer_height
Did a bit more work to prove out the settings design.
2014-11-20 10:36:03 -08:00
fill_density
Made a function to filter com port names for mac Change the text in basic mode
2016-11-02 15:56:27 -07:00
Raft & Support
Did a bit more work to prove out the settings design.
2014-11-20 10:36:03 -08:00
create_raft
Made a function to filter com port names for mac Change the text in basic mode
2016-11-02 15:56:27 -07:00
support_material
Added a drop list to baud rate Added Printer to basic and Intermediate Made clearing user override reset quick select settings drop lists
2016-05-12 18:42:19 -07:00
Printer
Changed Connection Info -> Connection in settings tab.
2016-05-12 18:56:40 -07:00
Connection
Added a drop list to baud rate Added Printer to basic and Intermediate Made clearing user override reset quick select settings drop lists
2016-05-12 18:42:19 -07:00
Description
Took out the prepend of MatterControl on profile settings and made them consistent lower case underscore.
2016-06-16 16:35:10 -07:00
printer_name
Put in a hack for the printer edit button.
2016-05-13 14:23:33 -07:00
Details
Took out the prepend of MatterControl on profile settings and made them consistent lower case underscore.
2016-06-16 16:35:10 -07:00
auto_connect
baud_rate
com_port
Refactored network printing settings to match the other printer settings Took out the automatic changes to other settings
2016-12-12 12:14:30 -08:00
ip_address
ip_port
Made the pre-heat use the temperature and bed_temperature . Put in a menu to select the slice settings level.
2014-12-08 16:40:50 -08:00
Intermediate
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names.
2015-06-05 11:17:28 -07:00
General
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings
2016-09-07 10:00:15 -07:00
Layers / Surface
Commit of the code
2014-01-29 19:09:30 -08:00
Layer Height
layer_height
Working on the ray tracing being an option all the time. Making the intermediate layout much more intuitive
2015-04-24 10:17:05 -07:00
first_layer_height
Made the outer surface multiple setting work in standard mode. Renamed the interface modes. Made quick menus save immediately on change. Renamed Perimeters to surface in same spots latest agg
2015-05-02 10:50:14 -07:00
Outer Surface
Added solid_shell setting Adde SetSettingsOnChange for setting that affect other setting. Refactoring
2015-05-01 18:44:43 -07:00
solid_shell
Commit of the code
2014-01-29 19:09:30 -08:00
Infill
Infill
fill_density
fill_pattern
Adding infill settings. Hooking stuff up to the new queue data.
2014-04-16 10:52:25 -07:00
infill_type
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings
2016-09-07 10:00:15 -07:00
Raft / Priming
Working on the ray tracing being an option all the time. Making the intermediate layout much more intuitive
2015-04-24 10:17:05 -07:00
Raft
create_raft
Changed labels for skirt and brim
2017-02-15 15:52:01 -08:00
Skirt
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings
2016-09-07 10:00:15 -07:00
skirt_distance
Commit of the code
2014-01-29 19:09:30 -08:00
Support Material
Support Material
support_material
fixed spelling of positive put in more matterslice settings.
2014-03-25 12:14:03 -07:00
support_type
Design tools
2017-03-15 16:17:06 -07:00
support_material_threshold
support_material_percent
Support Options
support_material_spacing
Working on the ray tracing being an option all the time. Making the intermediate layout much more intuitive
2015-04-24 10:17:05 -07:00
support_material_interface_layers
support_material_z_gap_layers
support_material_create_internal_support
Extruders
support_material_extruder
Commit of the code
2014-01-29 19:09:30 -08:00
Filament
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Material
Properties
Commit of the code
2014-01-29 19:09:30 -08:00
filament_diameter
Bringing in the work from unlimitedbacon #1026 Adding density setting to filament Adding cost option to filament
2016-07-05 12:24:00 -07:00
filament_density
filament_cost
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Temperatures
Updated the temperature layout strings.
2016-01-09 10:40:00 -08:00
Extruder Temperatures
Commit of the code
2014-01-29 19:09:30 -08:00
first_layer_temperature
temperature
Merge branch 'development' of https://github.com/MatterHackers/MatterControl into development Conflicts: StaticData/SliceSettings/Layouts.txt
2015-04-24 10:40:10 -07:00
extruder_wipe_temperature
Updated the temperature layout strings.
2016-01-09 10:40:00 -08:00
Bed Temperatures
Commit of the code
2014-01-29 19:09:30 -08:00
first_layer_bed_temperature
bed_temperature
added 'Extruder Wipe Temperature' and "Bed Remove Part Temperature" to Slice Settings
2015-04-24 10:25:03 -07:00
bed_remove_part_temperature
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Retraction
Put in a enable retract setting Made slice settings disable work
2017-08-02 15:19:32 -07:00
After Move
enable_retractions
Working on the ray tracing being an option all the time. Making the intermediate layout much more intuitive
2015-04-24 10:17:05 -07:00
retract_length
retract_speed
retract_lift
Commit of the code
2014-01-29 19:09:30 -08:00
Cooling
Working on the ray tracing being an option all the time. Making the intermediate layout much more intuitive
2015-04-24 10:17:05 -07:00
Fan Speed
min_fan_speed
max_fan_speed
Added a drop list to baud rate Added Printer to basic and Intermediate Made clearing user override reset quick select settings drop lists
2016-05-12 18:42:19 -07:00
Printer
Changed Connection Info -> Connection in settings tab.
2016-05-12 18:56:40 -07:00
Connection
Added a drop list to baud rate Added Printer to basic and Intermediate Made clearing user override reset quick select settings drop lists
2016-05-12 18:42:19 -07:00
Description
Took out the prepend of MatterControl on profile settings and made them consistent lower case underscore.
2016-06-16 16:35:10 -07:00
printer_name
Put in a hack for the printer edit button.
2016-05-13 14:23:33 -07:00
Details
Took out the prepend of MatterControl on profile settings and made them consistent lower case underscore.
2016-06-16 16:35:10 -07:00
auto_connect
baud_rate
com_port
Refactored network printing settings to match the other printer settings Took out the automatic changes to other settings
2016-12-12 12:14:30 -08:00
ip_address
ip_port
Commit of the code
2014-01-29 19:09:30 -08:00
Advanced
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names.
2015-06-05 11:17:28 -07:00
General
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings
2016-09-07 10:00:15 -07:00
Layers / Surface
Commit of the code
2014-01-29 19:09:30 -08:00
Layer Height
layer_height
first_layer_height
Making settings more consistent
2015-05-27 18:22:01 -07:00
Outer Surface - Perimeters
Commit of the code
2014-01-29 19:09:30 -08:00
perimeters
Cleaning up some settings names and organization. Added bed size to MatterSlice settings
2014-03-25 14:10:26 -07:00
avoid_crossing_perimeters
Moved the outside first
2015-01-24 11:26:45 -08:00
randomize_start
external_perimeters_first
Put in the ability to set how much the perimeter overlap is set to
2016-07-22 14:02:39 -07:00
perimeter_start_end_overlap
Put in the ability to turn off Merge Overlapping Lines Fixes a possible regression in slicing
2016-10-27 18:36:02 -07:00
merge_overlapping_lines
Default new thin filling code to on.
2016-09-06 17:15:20 -07:00
expand_thin_walls
Making settings more consistent
2015-05-27 18:22:01 -07:00
Outer Surface - Top & Bottom
Commit of the code
2014-01-29 19:09:30 -08:00
top_solid_layers
bottom_solid_layers
Getting more slice settings mapped for MatterSlice
2014-03-24 14:06:05 -07:00
Quality
Commit of the code
2014-01-29 19:09:30 -08:00
start_perimeters_at_concave_points
start_perimeters_at_non_overhang
thin_walls
Infill
Infill
fill_density
fill_pattern
Adding infill settings. Hooking stuff up to the new queue data.
2014-04-16 10:52:25 -07:00
infill_type
Commit of the code
2014-01-29 19:09:30 -08:00
solid_fill_pattern
Advanced
fill_angle
fixed spelling of positive put in more matterslice settings.
2014-03-25 12:14:03 -07:00
infill_overlap_perimeter
Adding in the ability to turn on and off thin line code Sorted some settings lists Put in minimum thin line width option Clean thin line output
2016-08-26 12:13:39 -07:00
fill_thin_gaps
Commit of the code
2014-01-29 19:09:30 -08:00
Speed
Added first pass at support for SLA printers Took out unused slice settings
2017-10-30 13:08:28 -07:00
Printing Speed
laser_speed_025
laser_speed_100
Put in speeds for raft printing and raft fan
2014-10-27 14:23:22 -07:00
Speed for Infill
Commit of the code
2014-01-29 19:09:30 -08:00
infill_speed
solid_infill_speed
top_solid_infill_speed
Put in speeds for raft printing and raft fan
2014-10-27 14:23:22 -07:00
raft_print_speed
Speed for Perimeters
Cleaning up some settings names and organization. Added bed size to MatterSlice settings
2014-03-25 14:10:26 -07:00
perimeter_speed
small_perimeter_speed
external_perimeter_speed
Put in speeds for raft printing and raft fan
2014-10-27 14:23:22 -07:00
Speeds for Other Printing
Commit of the code
2014-01-29 19:09:30 -08:00
support_material_speed
bridge_speed
Revise category heading
2015-12-18 11:21:12 -08:00
Speed for Non-Print Moves
Commit of the code
2014-01-29 19:09:30 -08:00
travel_speed
Modifiers
first_layer_speed
Added in the ability to set the number of first layers layers that print slow
2017-09-22 16:31:49 -07:00
number_of_first_layers
Added first pass at support for SLA printers Took out unused slice settings
2017-10-30 13:08:28 -07:00
Raft / Skirt / Brim
Putting in more multi extruder support Reorganizing the slice settings layouts
2014-09-25 11:01:15 -07:00
Raft
create_raft
raft_extra_distance_around_part
raft_air_gap
raft_layers
Put in speeds for raft printing and raft fan
2014-10-27 14:23:22 -07:00
raft_fan_speed_percent
Put in an option to set the extruder to use for the raft.
2014-11-23 08:13:51 -08:00
raft_extruder
Changed labels for skirt and brim
2017-02-15 15:52:01 -08:00
Skirt
Renaming slice settings Skirt and Raft -> Raft / Priming fixes MatterHackers/MCCentral#295 Change wording of 'Skirt and Raft' section of General Settings
2016-09-07 10:00:15 -07:00
skirts
skirt_distance
skirt_height
min_skirt_length
Commit of the code
2014-01-29 19:09:30 -08:00
Brim
Changed labels for skirt and brim
2017-02-15 15:52:01 -08:00
brims
Commit of the code
2014-01-29 19:09:30 -08:00
Support Material
Support Material
support_material
fixed spelling of positive put in more matterslice settings.
2014-03-25 12:14:03 -07:00
support_type
Commit of the code
2014-01-29 19:09:30 -08:00
support_material_threshold
Design tools
2017-03-15 16:17:06 -07:00
support_material_percent
Commit of the code
2014-01-29 19:09:30 -08:00
support_material_enforce_layers
Put in some new slice settings for matter slice. Fixed some buttons to go onuithread
2014-08-08 17:03:00 -07:00
Support Options
Commit of the code
2014-01-29 19:09:30 -08:00
support_material_pattern
support_material_spacing
support_material_angle
Put in some new slice settings for matter slice. Fixed some buttons to go onuithread
2014-08-08 17:03:00 -07:00
support_material_infill_angle
Commit of the code
2014-01-29 19:09:30 -08:00
support_material_interface_layers
support_material_interface_spacing
support_material_xy_distance
support_material_z_distance
Made the z distance a layer gap rather than a measurement.
2014-03-26 13:49:40 -07:00
support_material_z_gap_layers
Put in a air gap for support (separate from raft)
2015-12-24 10:06:40 -08:00
support_air_gap
Made the save stl in preview have better asyc early in save. Made the support everywhere curaengine setting work
2014-02-07 15:14:29 -08:00
support_material_create_internal_support
Added the ability to turn off support outlines.
2016-01-18 12:20:53 -08:00
support_material_create_perimeter
Putting in more multi extruder support Reorganizing the slice settings layouts
2014-09-25 11:01:15 -07:00
Extruders
support_material_extruder
support_material_interface_extruder
Made the gap distance easier to understand (user feedback). Put in repair options for slicing.
2014-05-17 13:07:04 -07:00
Repair
Outlines
repair_outlines_extensive_stitching
repair_outlines_keep_open
Commit of the code
2014-01-29 19:09:30 -08:00
Notes
Notes
notes
Output Options
Put in setting for output only first layer Took out non-reprap gcode output settings. makerbot is supported in binary driver ultimaker supports rep-rap gcode and ulti has errors
2016-03-10 18:18:03 -08:00
File Settings
output_only_first_layer
Added the ability to emit 'G0' for movement
2016-09-13 12:17:09 -07:00
g0
Commit of the code
2014-01-29 19:09:30 -08:00
Sequential Printing
complete_objects
Post-Processing Scripts
post_process
Multiple Extruders
Make sure we can handle blank lines in Slice settings files (they have been added manually) Put in wipe tower and wipe shield (more work on dual extrusion)
2014-09-10 10:01:13 -07:00
Extruder Change
wipe_shield_distance
wipe_tower_size
Commit of the code
2014-01-29 19:09:30 -08:00
Ooze Prevention
ooze_prevention
standby_temperature_delta
Advanced
Other
threads
resolution
overhangs
Filament
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Material
Properties
Commit of the code
2014-01-29 19:09:30 -08:00
filament_diameter
added filament density and cost settings to UI
2016-06-27 12:32:50 -07:00
filament_density
filament_cost
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Temperatures
Updated the temperature layout strings.
2016-01-09 10:40:00 -08:00
Extruder Temperatures
Commit of the code
2014-01-29 19:09:30 -08:00
first_layer_temperature
temperature
Merge branch 'development' of https://github.com/MatterHackers/MatterControl into development Conflicts: StaticData/SliceSettings/Layouts.txt
2015-04-24 10:40:10 -07:00
extruder_wipe_temperature
Updated the temperature layout strings.
2016-01-09 10:40:00 -08:00
Bed Temperatures
Commit of the code
2014-01-29 19:09:30 -08:00
first_layer_bed_temperature
bed_temperature
added 'Extruder Wipe Temperature' and "Bed Remove Part Temperature" to Slice Settings
2015-04-24 10:25:03 -07:00
bed_remove_part_temperature
Updated the layout of the Filament tab
2016-07-19 09:45:10 -07:00
Retraction
Put in a enable retract setting Made slice settings disable work
2017-08-02 15:19:32 -07:00
After Move
enable_retractions
Putting in more multi extruder support Reorganizing the slice settings layouts
2014-09-25 11:01:15 -07:00
retract_length
Put in unretract extra on tool change. Moved tool change to a separate section
2016-06-06 16:20:48 -07:00
retract_restart_extra
Put in the ability to ramp the extra extrusion after move Made the change islands retract always occur if requested.
2017-07-07 08:40:54 -07:00
retract_restart_extra_time_to_apply
Putting in more multi extruder support Reorganizing the slice settings layouts
2014-09-25 11:01:15 -07:00
retract_speed
retract_lift
retract_before_travel
retract_layer_change
Added in the ability to set if we are going to retract when changing islands.MapItemToBool New translations for updated slice descriptions.
2016-01-13 14:26:31 -08:00
retract_when_changing_islands
Putting in more multi extruder support Reorganizing the slice settings layouts
2014-09-25 11:01:15 -07:00
min_extrusion_before_retract
wipe
Put in a enable retract setting Made slice settings disable work
2017-08-02 15:19:32 -07:00
Before Tool Change
Put in unretract extra on tool change. Moved tool change to a separate section
2016-06-06 16:20:48 -07:00
retract_length_tool_change
Putting in more multi extruder support Reorganizing the slice settings layouts
2014-09-25 11:01:15 -07:00
retract_restart_extra_toolchange
Put in the ability to specify bottom and top layers in mm Also interface layers and z gap improved the slice settings layout improved intermediate settings to be much more useful Added a new mm setting and improved the optional % editing.
2015-04-24 13:09:25 -07:00
Extrusion
Moved some settings around
2016-07-26 17:55:40 -07:00
Flow
extrusion_multiplier
Put in the ability to specify bottom and top layers in mm Also interface layers and z gap improved the slice settings layout improved intermediate settings to be much more useful Added a new mm setting and improved the optional % editing.
2015-04-24 13:09:25 -07:00
Extrusion Width
extrusion_width
first_layer_extrusion_width
perimeter_extrusion_width
Add configurable outside perimeter extrusion widths
2015-10-13 19:36:19 -07:00
external_perimeter_extrusion_width
Put in the ability to specify bottom and top layers in mm Also interface layers and z gap improved the slice settings layout improved intermediate settings to be much more useful Added a new mm setting and improved the optional % editing.
2015-04-24 13:09:25 -07:00
infill_extrusion_width
solid_infill_extrusion_width
top_infill_extrusion_width
support_material_extrusion_width
Commit of the code
2014-01-29 19:09:30 -08:00
Cooling
Enable
fan_always_on
cooling
Fan Speed
min_fan_speed
max_fan_speed
bridge_fan_speed
disable_fan_first_layers
Cooling Thresholds
fan_below_layer_time
slowdown_below_layer_time
min_print_speed
Working on the ray tracing being an option all the time. Making the intermediate layout much more intuitive
2015-04-24 10:17:05 -07:00
Enable
cool_extruder_lift
Commit of the code
2014-01-29 19:09:30 -08:00
Printer
Changed Connection Info -> Connection in settings tab.
2016-05-12 18:56:40 -07:00
Connection
let .net do the rounding
2016-05-11 12:26:20 -07:00
Description
Took out the prepend of MatterControl on profile settings and made them consistent lower case underscore.
2016-06-16 16:35:10 -07:00
printer_name
Put in a hack for the printer edit button.
2016-05-13 14:23:33 -07:00
Details
Took out the prepend of MatterControl on profile settings and made them consistent lower case underscore.
2016-06-16 16:35:10 -07:00
auto_connect
baud_rate
com_port
Networked Printing enabled in MC - Added properties to enable s3g coms, enable networked communication, store IP and port - updated Settings on Change to be a dictionary that stores what they are changing and how to do it - added handling in check box for SettingsOnChange - SerialPortIsAvailable returns true when networked printing is enabled - Engine mapping base updated for new properties
2016-07-29 14:48:41 -07:00
ip_address
ip_port
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names.
2015-06-05 11:17:28 -07:00
Print Area
Commit of the code
2014-01-29 19:09:30 -08:00
Size and Coordinates
bed_size
print_center
build_height
z_offset
putting in support for circular beds (and bed shapes) changing SeeMeCNC to have circular beds white listing RoBo 3D
2014-02-05 12:04:05 -08:00
bed_shape
Made the about window always on top made an update notification in the menu bar area took the "about' tab off the main page Cleaned up the checking of touchscreen Made a new Features section for the printer settings
2015-05-20 10:55:14 -07:00
Features
Added the printer name to slice settings ui Reorganized settings layout a bit for printer/ fatures Made more invert lightness extension method uses
2016-05-10 13:30:51 -07:00
Interface
Added first pass at support for SLA printers Took out unused slice settings
2017-10-30 13:08:28 -07:00
sla_printer
Added the printer name to slice settings ui Reorganized settings layout a bit for printer/ fatures Made more invert lightness extension method uses
2016-05-10 13:30:51 -07:00
show_reset_connection
include_firmware_updater
Made the about window always on top made an update notification in the menu bar area took the "about' tab off the main page Cleaned up the checking of touchscreen Made a new Features section for the printer settings
2015-05-20 10:55:14 -07:00
Hardware
has_fan
has_hardware_leveling
has_heated_bed
has_sd_card_reader
has_power_control
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
filament_runout_sensor
has_z_probe
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
has_z_servo
Refactored network printing settings to match the other printer settings Took out the automatic changes to other settings
2016-12-12 12:14:30 -08:00
enable_network_printing
enable_sailfish_communication
Added the printer name to slice settings ui Reorganized settings layout a bit for printer/ fatures Made more invert lightness extension method uses
2016-05-10 13:30:51 -07:00
Behavior
z_homes_to_max
Made the about window always on top made an update notification in the menu bar area took the "about' tab off the main page Cleaned up the checking of touchscreen Made a new Features section for the printer settings
2015-05-20 10:55:14 -07:00
heat_extruder_before_homing
Made it configurable if the motors are released automatically at the end of a print
2017-12-03 14:40:50 -08:00
auto_release_motors
Put in validate layer height made right button not do design tools check starting bed temp
2017-08-21 15:45:43 -07:00
validate_layer_height
added ability to turn off send with checksum made print_center setting show up
2017-11-30 13:59:14 -08:00
send_with_checksum
Adding support for turning on and off extruder long run reset
2017-11-30 09:43:14 -08:00
reset_long_extrusion
Good feedback about redundant naming. Eliminated a bunch of 'Settings' names.
2015-06-05 11:17:28 -07:00
Firmware
gcode_flavor
use_relative_e_distances
Advanced
use_firmware_retraction
vibration_limit
Put in a bunch of print leveling data so that it is easier to get it setup and working.
2015-08-03 12:02:42 -07:00
Print Leveling
Machine Settings
print_leveling_solution
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
leveling_manual_positions
Made all the print leveling data settable in config
2015-08-03 15:48:36 -07:00
print_leveling_required_to_print
Fix typo
2015-12-17 17:05:57 -08:00
Probe Settings
Made the probe height a settings value MatterHackers/MatterControl#937 On print leveling setup move up an amount from the previous point, not to an absolute point
2017-02-01 07:54:55 -08:00
print_leveling_probe_start
All new 1.7.1 changes
2017-05-19 14:39:57 -07:00
use_z_probe
Merging in 1.7.1 improvements
2017-06-07 15:56:02 -07:00
z_probe_samples
z_probe_xy_offset
z_probe_z_offset
z_servo_depolyed_angle
z_servo_retracted_angle
Put in code to refresh the library selector Renamed ResumePrinting to PrintRecovery
2016-09-06 14:42:14 -07:00
Print Recovery
Recover Settings
recover_is_enabled
recover_first_layer_speed
recover_position_before_z_home
Commit of the code
2014-01-29 19:09:30 -08:00
Custom G-Code
Remove per-field GCode sections, improve highlight styling
2017-09-13 06:40:30 -07:00
Custom G-Code
Commit of the code
2014-01-29 19:09:30 -08:00
start_gcode
end_gcode
layer_gcode
Put in a before tool change gcode property
2016-04-25 16:42:00 -07:00
before_toolchange_gcode
Commit of the code
2014-01-29 19:09:30 -08:00
toolchange_gcode
Got pause, resume and cancel gcode into the settings and working in printer communication.
2014-03-17 14:41:36 -07:00
pause_gcode
resume_gcode
cancel_gcode
Added a connect_gcode. Gcode that is sent just after connecting to the printer.
2015-05-18 16:58:09 -07:00
connect_gcode
Remove per-field GCode sections, improve highlight styling
2017-09-13 06:40:30 -07:00
Filters
Put in regex read write translation code
2017-06-29 09:47:34 -07:00
write_regex
read_regex
Putting in more multi extruder support Reorganizing the slice settings layouts
2014-09-25 11:01:15 -07:00
Extruder
Consolidate extruder settings, use nozzle term where applicable
2017-09-14 13:31:02 -07:00
Extruders
extruder_count
Commit of the code
2014-01-29 19:09:30 -08:00
nozzle_diameter
Consolidate extruder settings, use nozzle term where applicable
2017-09-14 13:31:02 -07:00
extruders_share_temperature
added filament density and cost settings to UI
2016-06-27 12:32:50 -07:00
extruder_offset
Reference in a new issue Copy permalink