"HelpText":"The default temperature to set the bed to. Can sometimes be overridden on the first layer. Set to 0 to eliminate bed temperature commands.",
"HelpText":"How many layers, or the distance, that will be solid filled on the bottom surfaces of the object. Add mm to the end of the number to specify distance.",
"HelpText":"Acceleration to during bridging. Set to 0 to disable changing the printer's acceleration.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm/s<>"
},
{
"SlicerConfigName":"bridge_fan_speed",
"PresentationName":"Bridging Fan Speed",
"HelpText":"The fan speed to use during bridging.",
"DataEditType":"INT",
"ExtraSettings":"%"
},
{
"SlicerConfigName":"bridge_flow_ratio",
"PresentationName":"Bridge Flow Ratio",
"HelpText":"This controls the ratio of material extruder during bridging. Reducing this slightly can help bridging by stretching the filament more, using a fan can also help greatly.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":""
},
{
"SlicerConfigName":"bridge_speed",
"PresentationName":"Bridges",
"HelpText":"The speed to move when bridging between walls.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm/s"
},
{
"SlicerConfigName":"brim_width",
"PresentationName":"Brim Width",
"HelpText":"The amount of brim that will be drawn around each object. This is useful to ensure that parts stay affixed to the bed.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"build_height",
"PresentationName":"Build Height",
"HelpText":"The height of the printable area. If set to 0 the parts height will not be validated.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"cancel_gcode",
"PresentationName":"Cancel G-Code",
"HelpText":"This gcode will be inserted when the print is canceled.",
"DataEditType":"MULTI_LINE_TEXT",
"ExtraSettings":""
},
{
"SlicerConfigName":"center_part_on_bed",
"PresentationName":"Center On Bed",
"HelpText":"This will cause the print to be centered on the bed. Disable this if you know your models have been created where you want them to print.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"complete_objects",
"PresentationName":"Complete Individual Objects",
"HelpText":"Each individual part is printed to completion then the extruder is lowered back to the bed and the next part is printed.",
"HelpText":"The extra distance the raft will extend around the part.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"raft_air_gap",
"PresentationName":"Air Gap",
"HelpText":"The distance between the first layer and the top of the raft. A good value is typically about 1/2 your extrusion diameter. So, between 0.0 and .2 for a .4 nozzle.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"raft_fan_speed_percent",
"PresentationName":"Fan Speed",
"HelpText":"The speed to run the fan during the printing of the raft, 0 will leave the fan off.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"%"
},
{
"SlicerConfigName":"raft_print_speed",
"PresentationName":"Raft",
"HelpText":"The speed to print the layers of the raft (other than the first layer). This can be set explicitly or as a percentage of the Infill speed.",
"DataEditType":"DOUBLE_OR_PERCENT",
"ExtraSettings":"mm/s or %"
},
{
"SlicerConfigName":"default_acceleration",
"PresentationName":"Default",
"HelpText":"Acceleration to use on all moves not defined above. Set to 0 to disable changing the printer's acceleration.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm/s<>"
},
{
"SlicerConfigName":"disable_fan_first_layers",
"PresentationName":"Disable Fan For The First",
"HelpText":"The number of layers for which the fan will be forced to remain off.",
"DataEditType":"INT",
"ExtraSettings":"Layers"
},
{
"SlicerConfigName":"end_gcode",
"PresentationName":"End G-Code",
"HelpText":"This gcode will be inserted at the end of all automatic output (the very end of the gcode commands).",
"HelpText":"Normally while printing the printer will home before heating the extruder(s). Set this to cause the heating to happen before the homing. This can help with printers that touch the bed while homing.",
"HelpText":"This is the identifier used in the gcode to specify the extruder.",
"DataEditType":"STRING",
"ExtraSettings":""
},
{
"SlicerConfigName":"extrusion_multiplier",
"PresentationName":"Extrusion Multiplier",
"HelpText":"All extrusions are multiplied by this value. Increasing it above 1 (1.1 is a good max value) will increase the amount of filament being extruded; decreasing it (.9 is a good minimum value) will decrease the amount being extruded.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":""
},
{
"SlicerConfigName":"extrusion_width",
"PresentationName":"Default Extrusion Width",
"HelpText":"Leave this as 0 to allow automatic calculation of extrusion width.",
"DataEditType":"DOUBLE_OR_PERCENT",
"ExtraSettings":"mm or %\\nleave 0 for auto"
},
{
"SlicerConfigName":"fan_always_on",
"PresentationName":"Keep Fan Always On",
"HelpText":"This will force the fan to remain on throughout the print. In general you should have this off and just enable auto cooling.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"fan_below_layer_time",
"PresentationName":"Enable Fan If Layer\\nPrint Time Is Below",
"HelpText":"If a layer is estimated to take less than this to print, the fan will be turned on.",
"DataEditType":"INT",
"ExtraSettings":"Seconds"
},
{
"SlicerConfigName":"filament_diameter",
"PresentationName":"Diameter",
"HelpText":"This should be set to the actual diameter of the filament you are using on your printer. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"fill_angle",
"PresentationName":"Starting Angle",
"HelpText":"Sets the starting angle of the infill. Not used when bridging.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"degrees"
},
{
"SlicerConfigName":"fill_density",
"PresentationName":"Fill Density",
"HelpText":"The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.",
"HelpText":"Acceleration to use while printing the first layer. Set to 0 to the default first layer acceleration.",
"DataEditType":"DOUBLE",
"ExtraSettings":"mm/s"
},
{
"SlicerConfigName":"first_layer_bed_temperature",
"PresentationName":"Bed First Layer",
"HelpText":"The temperature to set the bed to before printing the first layer. The printer will wait until this temperature has been reached before printing. Set to 0 to eliminate bed temperature commands.",
"DataEditType":"DOUBLE",
"ExtraSettings":"degrees"
},
{
"SlicerConfigName":"first_layer_extrusion_width",
"PresentationName":"First Layer",
"HelpText":"Setting this to greater than 100% can often help the first layer have better adhesion to the print bed.",
"DataEditType":"DOUBLE_OR_PERCENT",
"ExtraSettings":"mm or %\\nleave 0 for default"
},
{
"SlicerConfigName":"first_layer_height",
"PresentationName":"First Layer Height",
"HelpText":"Sets the height of the first layer. It is often desirable to print a taller first layer to ensure a good solid adhesion to the build plate.",
"HelpText":"The temperature to set the extruder to before printing the first layer of a part. The printer will wait until this temperature has been reached before printing.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"degrees"
},
{
"SlicerConfigName":"g0",
"PresentationName":"Use G0",
"HelpText":"Use G0 for moves rather than G1.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"gap_fill_speed",
"PresentationName":"Gap Fill",
"HelpText":"Speed to fill small gaps. Keep low to avoid vibration. Set to 0 to skip filling small gaps.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm/s"
},
{
"SlicerConfigName":"gcode_arcs",
"PresentationName":"Use Arcs",
"HelpText":"Use firmware arcs rather than multiple segments for curves.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"gcode_comments",
"PresentationName":"Verbose G-Code",
"HelpText":"Include detailed comments in the gcode.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"gcode_flavor",
"PresentationName":"G-Code Flavor",
"HelpText":"Some firmware use different g and m codes. Setting this ensures that the output gcode will use the correct commands.",
"HelpText":"This is the minimum amount of filament that must be extruded before a retraction can occur.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"min_fan_speed",
"PresentationName":"Minimum Fan Speed",
"HelpText":"This is the minimum fan speed that your fan can run at.",
"DataEditType":"INT",
"ExtraSettings":"%"
},
{
"SlicerConfigName":"min_print_speed",
"PresentationName":"Minimum Print Speed",
"HelpText":"This is the minimum speed that the printer will reduce to to make the layer take long enough to satisfy the minimum layer time.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm/s"
},
{
"SlicerConfigName":"min_skirt_length",
"PresentationName":"Minimum Extrusion Length",
"HelpText":"Sets the minimum amount of filament to use drawing the skirt loops. This will cause at least enough skirt loops to be drawn to use this amount of filament.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"notes",
"PresentationName":"notes",
"HelpText":"These notes will be added as comments in the header of the output gcode.",
"DataEditType":"MULTI_LINE_TEXT",
"ExtraSettings":""
},
{
"SlicerConfigName":"nozzle_diameter",
"PresentationName":"Nozzle Diameter",
"HelpText":"This is the diameter of your extruder nozzle.",
"HelpText":"You can include additional programs to process the gcode after slicer is finished. The complete path of the program to run should be included here.",
"DataEditType":"MULTI_LINE_TEXT",
"ExtraSettings":""
},
{
"SlicerConfigName":"print_center",
"PresentationName":"Print Center",
"HelpText":"The position (coordinates) of the center of the print bed.",
"DataEditType":"VECTOR2",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"raft_layers",
"PresentationName":"Raft Layers",
"HelpText":"Number of layers to print before printing any parts.",
"DataEditType":"INT",
"ExtraSettings":"layers"
},
{
"SlicerConfigName":"randomize_start",
"PresentationName":"Randomize Starting Points",
"HelpText":"Start each new layer from a different vertex to reduce seams.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"resume_gcode",
"PresentationName":"Resume G-Code",
"HelpText":"This gcode will be inserted when the printer is resumed.",
"HelpText":"The number of layers to draw the skirt.",
"DataEditType":"INT",
"ExtraSettings":"layers"
},
{
"SlicerConfigName":"skirts",
"PresentationName":"Loops",
"HelpText":"The number of loops to draw around all the parts on the bed.",
"DataEditType":"INT",
"ExtraSettings":""
},
{
"SlicerConfigName":"slowdown_below_layer_time",
"PresentationName":"Slow Down If Layer Print\\nTime Is Below",
"HelpText":"If a layer is estimated to take less than this to print, the movement speed will be reduced to try and make the layer take this long to print.",
"DataEditType":"INT",
"ExtraSettings":"Seconds"
},
{
"SlicerConfigName":"small_perimeter_speed",
"PresentationName":"Small Perimeters",
"HelpText":"Used for small perimeters (usually holes). This can be set explicitly or as a percentage of the Perimeters' speed.",
"DataEditType":"DOUBLE_OR_PERCENT",
"ExtraSettings":"mm/s or %"
},
{
"SlicerConfigName":"solid_fill_pattern",
"PresentationName":"Top/Bottom Fill Pattern",
"HelpText":"The pattern used on the bottom and top layers of the print.",
"HelpText":"Force the print to have only one layer and gradually increase the extruder height during the print. Only one part can be printed at a time with this feature.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"standby_temperature_delta",
"PresentationName":"Temp Lower Amount",
"HelpText":"This is the amount to lower the temperature of an extruder that is not currently printing.",
"HelpText":"This gcode will be inserted into the output right after the temperature setting. If you have the commands to set temperature in this section they will not be generated outside of this section. You can also include values from other settings such as [temperature].",
"HelpText":"If this is checked support will be allowed starting on top of internal surfaces. If it is not checked support will only be created starting at the bed.",
"HelpText":"How many layers, or the distance, that will be solid filled on the top surfaces of the object. Add mm to the end of the number to specify distance.",
"HelpText":"Speed to move when not extruding material.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm/s"
},
{
"SlicerConfigName":"use_firmware_retraction",
"PresentationName":"Use Firmware Retraction",
"HelpText":"Request the firmware to do retractions rather than specify the extruder movements directly.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"use_relative_e_distances",
"PresentationName":"Use Relative E Distances",
"HelpText":"Normally you will want to use absolute e distances. Only check this if you know your printer needs relative e distances.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"vibration_limit",
"PresentationName":"Vibration Limit",
"HelpText":"This is to help reduce vibrations during printing. If your printer has a resonance frequency that is causing trouble you can set this to try and reduce printing at that frequency.",
"HelpText":"If greater than 0, this is the distance away from parts to create a perimeter to wipe when entering.",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"wipe_tower_size",
"PresentationName":"Wipe Tower Size",
"HelpText":"If greater than 0, this is the X by Y size of a tower to use to when changing extruders",
"DataEditType":"POSITIVE_DOUBLE",
"ExtraSettings":"mm"
},
{
"SlicerConfigName":"z_can_be_negative",
"PresentationName":"Z Can Be Negative",
"HelpText":"Lets the bed leveling code know if the printer can support the z axis going below 0. A printer with min z endstops or software end stops may not be able to.",
"DataEditType":"CHECK_BOX",
"ExtraSettings":""
},
{
"SlicerConfigName":"z_offset",
"PresentationName":"Z Offset",
"HelpText":"This value will be added to all of the z positions of the created gcode.",
