Simple
  General
    Single
      Layers & Infill
        layer_height
        fill_density
      Raft & Support
        create_raft
        support_material
  Printer
    Connection
      Description
        printer_name
      Details
        auto_connect
        baud_rate
        com_port
        ip_address
        ip_port
Intermediate
  General
    Layers / Surface
      Layer Height
        layer_height
        first_layer_height
      Outer Surface
        solid_shell
    Infill
      Infill
        fill_density
        fill_pattern
        infill_type
    Raft / Priming
      Raft
        create_raft
      Skirt
        skirt_distance
    Support Material
      Support Material
        support_material
        support_type
        support_material_threshold
        support_material_percent
      Support Options
        support_material_spacing
        support_material_interface_layers
        support_material_z_gap_layers
        support_material_create_internal_support
      Extruders
        support_material_extruder
  Filament
    Material
      Properties
        filament_diameter
        filament_density
        filament_cost
    Temperatures
      Extruder Temperatures
        first_layer_temperature
        temperature
        extruder_wipe_temperature
      Bed Temperatures
        first_layer_bed_temperature
        bed_temperature
        bed_remove_part_temperature
    Retraction
      After Move
        enable_retractions
        retract_length
        retract_speed
        retract_lift
    Cooling
      Fan Speed
        min_fan_speed
        max_fan_speed
  Printer
    Connection
      Description
        printer_name
      Details
        auto_connect
        baud_rate
        com_port
        ip_address
        ip_port
Advanced
  General
    Layers / Surface
      Layer Height
        layer_height
        first_layer_height
      Outer Surface - Perimeters
        perimeters
        avoid_crossing_perimeters
        randomize_start
        external_perimeters_first
        perimeter_start_end_overlap
        merge_overlapping_lines
        expand_thin_walls
      Outer Surface - Top & Bottom
        top_solid_layers
        bottom_solid_layers
      Quality
        extra_perimeters
        start_perimeters_at_concave_points
        start_perimeters_at_non_overhang
        thin_walls
    Infill
      Infill
        fill_density
        fill_pattern
        infill_type
        solid_fill_pattern
      Advanced
        infill_every_layers
        infill_only_where_needed
        solid_infill_every_layers
        fill_angle
        solid_infill_below_area
        infill_first
        infill_overlap_perimeter
        fill_thin_gaps
    Speed
      Speed for Infill
        infill_speed
        solid_infill_speed
        top_solid_infill_speed
        raft_print_speed
      Speed for Perimeters
        perimeter_speed
        small_perimeter_speed
        external_perimeter_speed
      Speeds for Other Printing 
        support_material_speed
        bridge_speed
        gap_fill_speed
      Speed for Non-Print Moves
        travel_speed
      Modifiers
        first_layer_speed
      Acceleration Control
        perimeter_acceleration
        infill_acceleration
        bridge_acceleration
        first_layer_acceleration
        default_acceleration
    Raft / Priming
      Raft
        create_raft
        raft_extra_distance_around_part
        raft_air_gap
        raft_layers
        raft_fan_speed_percent
        raft_extruder
      Skirt
        skirts
        skirt_distance
        skirt_height
        min_skirt_length
      Brim
        brims
        brim_width
    Support Material
      Support Material
        support_material
        support_type
        support_material_threshold
        support_material_percent
        support_material_enforce_layers
      Support Options
        support_material_pattern
        support_material_spacing
        support_material_angle
        support_material_infill_angle
        support_material_interface_layers
        support_material_interface_spacing
        support_material_xy_distance
        support_material_z_distance
        support_material_z_gap_layers
        support_air_gap
        support_material_create_internal_support
        support_material_create_perimeter
      Extruders
        support_material_extruder
        support_material_interface_extruder
    Repair
      Outlines
        repair_outlines_extensive_stitching
        repair_outlines_keep_open
    Notes
      Notes
        notes
    Output Options
      File Settings
        output_only_first_layer
        g0
      Sequential Printing
        complete_objects
        extruder_clearance_height
        extruder_clearance_radius
      Output File
        gcode_comments
        output_filename_format
      Post-Processing Scripts
        post_process
    Multiple Extruders
      Extruders
        perimeter_extruder
        infill_extruder
      Extruder Change
        wipe_shield_distance
        wipe_tower_size
      Ooze Prevention
        ooze_prevention
        standby_temperature_delta
    Advanced
      Other
        threads
        resolution
        extrusion_axis
        overhangs
    Single Print
      Settings Will Clear at End of Print
        spiral_vase
        layer_to_pause
  Filament
    Material
      Properties
        filament_diameter
        filament_density
        filament_cost
    Temperatures
      Extruder Temperatures
        first_layer_temperature
        temperature
        extruder_wipe_temperature
      Bed Temperatures
        first_layer_bed_temperature
        bed_temperature
        bed_remove_part_temperature
    Retraction
      After Move
        enable_retractions
        retract_length
        retract_restart_extra
        retract_restart_extra_time_to_apply
        retract_speed
        retract_lift
        retract_before_travel
        retract_layer_change
        retract_when_changing_islands
        min_extrusion_before_retract
        wipe
      Before Tool Change
        retract_length_tool_change
        retract_restart_extra_toolchange
    Extrusion
      Flow
        extrusion_multiplier
        bridge_flow_ratio
      Extrusion Width
        extrusion_width
        first_layer_extrusion_width
        perimeter_extrusion_width
        external_perimeter_extrusion_width
        infill_extrusion_width
        solid_infill_extrusion_width
        top_infill_extrusion_width
        support_material_extrusion_width
    Cooling
      Enable
        fan_always_on
        cooling
      Fan Speed
        min_fan_speed
        max_fan_speed
        bridge_fan_speed
        disable_fan_first_layers
      Cooling Thresholds
        fan_below_layer_time
        slowdown_below_layer_time
        min_print_speed
      Enable
        cool_extruder_lift
  Printer
    Connection
      Description
        printer_name
      Details
        auto_connect
        baud_rate
        com_port
        ip_address
        ip_port
    Print Area
      Size and Coordinates
        bed_size
        print_center
        build_height
        z_offset
        bed_shape
    Features
      Interface
        show_reset_connection
        include_firmware_updater
      Hardware
        extruder_count
        has_fan
        has_hardware_leveling
        has_heated_bed
        has_sd_card_reader
        has_power_control
        filament_runout_sensor
        has_z_probe
        has_z_servo
        enable_network_printing
        enable_sailfish_communication
      Behavior
        z_homes_to_max
        heat_extruder_before_homing
        extruders_share_temperature
        validate_layer_height
      Firmware
        gcode_flavor
        use_relative_e_distances
      Advanced
        use_firmware_retraction
        vibration_limit
    Print Leveling
      Machine Settings
        print_leveling_solution
        leveling_manual_positions
        print_leveling_required_to_print
      Probe Settings
        print_leveling_probe_start
        use_z_probe
        z_probe_samples
        z_probe_xy_offset
        z_probe_z_offset
        z_servo_depolyed_angle
        z_servo_retracted_angle
    Print Recovery
      Recover Settings
        recover_is_enabled
        recover_first_layer_speed
        recover_position_before_z_home
    Custom G-Code
      Start G-Code
        start_gcode
      End G-Code
        end_gcode
      Layer Change G-Code
        layer_gcode
      Before Tool Change G-Code
        before_toolchange_gcode
      After Tool Change G-Code
        toolchange_gcode
      Pause G-Code
        pause_gcode
      Resume G-Code
        resume_gcode
      Cancel G-Code
        cancel_gcode
      On Connect G-Code
        connect_gcode
      Write Filters
        write_regex
      Read Filters
        read_regex
    Extruder
      Extruder X
        nozzle_diameter
        extruder_offset
